/****************************************************************************** * * Name: actypes.h - Common data types for the entire ACPI subsystem * *****************************************************************************/ /* * Copyright (C) 2000 - 2016, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */ #ifndef __ACTYPES_H__ #define __ACTYPES_H__ /* acpisrc:StructDefs -- for acpisrc conversion */ /* * ACPI_MACHINE_WIDTH must be specified in an OS- or compiler-dependent header * and must be either 32 or 64. 16-bit ACPICA is no longer supported, as of * 12/2006. */ #ifndef ACPI_MACHINE_WIDTH #error ACPI_MACHINE_WIDTH not defined #endif /* * Data type ranges * Note: These macros are designed to be compiler independent as well as * working around problems that some 32-bit compilers have with 64-bit * constants. */ #define ACPI_UINT8_MAX (UINT8) (~((UINT8) 0)) /* 0xFF */ #define ACPI_UINT16_MAX (UINT16)(~((UINT16) 0)) /* 0xFFFF */ #define ACPI_UINT32_MAX (UINT32)(~((UINT32) 0)) /* 0xFFFFFFFF */ #define ACPI_UINT64_MAX (UINT64)(~((UINT64) 0)) /* 0xFFFFFFFFFFFFFFFF */ #define ACPI_ASCII_MAX 0x7F /* * Architecture-specific ACPICA Subsystem Data Types * * The goal of these types is to provide source code portability across * 16-bit, 32-bit, and 64-bit targets. * * 1) The following types are of fixed size for all targets (16/32/64): * * BOOLEAN Logical boolean * * UINT8 8-bit (1 byte) unsigned value * UINT16 16-bit (2 byte) unsigned value * UINT32 32-bit (4 byte) unsigned value * UINT64 64-bit (8 byte) unsigned value * * INT16 16-bit (2 byte) signed value * INT32 32-bit (4 byte) signed value * INT64 64-bit (8 byte) signed value * * COMPILER_DEPENDENT_UINT64/INT64 - These types are defined in the * compiler-dependent header(s) and were introduced because there is no common * 64-bit integer type across the various compilation models, as shown in * the table below. * * Datatype LP64 ILP64 LLP64 ILP32 LP32 16bit * char 8 8 8 8 8 8 * short 16 16 16 16 16 16 * _int32 32 * int 32 64 32 32 16 16 * long 64 64 32 32 32 32 * long long 64 64 * pointer 64 64 64 32 32 32 * * Note: ILP64 and LP32 are currently not supported. * * * 2) These types represent the native word size of the target mode of the * processor, and may be 16-bit, 32-bit, or 64-bit as required. They are * usually used for memory allocation, efficient loop counters, and array * indexes. The types are similar to the size_t type in the C library and are * required because there is no C type that consistently represents the native * data width. ACPI_SIZE is needed because there is no guarantee that a * kernel-level C library is present. * * ACPI_SIZE 16/32/64-bit unsigned value * ACPI_NATIVE_INT 16/32/64-bit signed value */ /******************************************************************************* * * Common types for all compilers, all targets * ******************************************************************************/ #ifndef ACPI_USE_SYSTEM_INTTYPES typedef unsigned char BOOLEAN; typedef unsigned char UINT8; typedef unsigned short UINT16; typedef short INT16; typedef COMPILER_DEPENDENT_UINT64 UINT64; typedef COMPILER_DEPENDENT_INT64 INT64; #endif /* ACPI_USE_SYSTEM_INTTYPES */ /* * Value returned by AcpiOsGetThreadId. There is no standard "thread_id" * across operating systems or even the various UNIX systems. Since ACPICA * only needs the thread ID as a unique thread identifier, we use a UINT64 * as the only common data type - it will accommodate any type of pointer or * any type of integer. It is up to the host-dependent OSL to cast the * native thread ID type to a UINT64 (in AcpiOsGetThreadId). */ #define ACPI_THREAD_ID UINT64 /******************************************************************************* * * Types specific to 64-bit targets * ******************************************************************************/ #if ACPI_MACHINE_WIDTH == 64 #ifndef ACPI_USE_SYSTEM_INTTYPES typedef unsigned int UINT32; typedef int INT32; #endif /* ACPI_USE_SYSTEM_INTTYPES */ typedef INT64 ACPI_NATIVE_INT; typedef UINT64 ACPI_SIZE; typedef UINT64 ACPI_IO_ADDRESS; typedef UINT64 ACPI_PHYSICAL_ADDRESS; #define ACPI_MAX_PTR ACPI_UINT64_MAX #define ACPI_SIZE_MAX ACPI_UINT64_MAX #define ACPI_USE_NATIVE_DIVIDE /* Has native 64-bit integer support */ /* * In the case of the Itanium Processor Family (IPF), the hardware does not * support misaligned memory transfers. Set the MISALIGNMENT_NOT_SUPPORTED flag * to indicate that special precautions must be taken to avoid alignment faults. * (IA64 or ia64 is currently used by existing compilers to indicate IPF.) * * Note: EM64T and other X86-64 processors support misaligned transfers, * so there is no need to define this flag. */ #if defined (__IA64__) || defined (__ia64__) #define ACPI_MISALIGNMENT_NOT_SUPPORTED #endif /******************************************************************************* * * Types specific to 32-bit targets * ******************************************************************************/ #elif ACPI_MACHINE_WIDTH == 32 #ifndef ACPI_USE_SYSTEM_INTTYPES typedef unsigned int UINT32; typedef int INT32; #endif /* ACPI_USE_SYSTEM_INTTYPES */ typedef INT32 ACPI_NATIVE_INT; typedef UINT32 ACPI_SIZE; #ifdef ACPI_32BIT_PHYSICAL_ADDRESS /* * OSPMs can define this to shrink the size of the structures for 32-bit * none PAE environment. ASL compiler may always define this to generate * 32-bit OSPM compliant tables. */ typedef UINT32 ACPI_IO_ADDRESS; typedef UINT32 ACPI_PHYSICAL_ADDRESS; #else /* ACPI_32BIT_PHYSICAL_ADDRESS */ /* * It is reported that, after some calculations, the physical addresses can * wrap over the 32-bit boundary on 32-bit PAE environment. * https://bugzilla.kernel.org/show_bug.cgi?id=87971 */ typedef UINT64 ACPI_IO_ADDRESS; typedef UINT64 ACPI_PHYSICAL_ADDRESS; #endif /* ACPI_32BIT_PHYSICAL_ADDRESS */ #define ACPI_MAX_PTR ACPI_UINT32_MAX #define ACPI_SIZE_MAX ACPI_UINT32_MAX #else /* ACPI_MACHINE_WIDTH must be either 64 or 32 */ #error unknown ACPI_MACHINE_WIDTH #endif /******************************************************************************* * * OS-dependent types * * If the defaults below are not appropriate for the host system, they can * be defined in the OS-specific header, and this will take precedence. * ******************************************************************************/ /* Flags for AcpiOsAcquireLock/AcpiOsReleaseLock */ #ifndef ACPI_CPU_FLAGS #define ACPI_CPU_FLAGS ACPI_SIZE #endif /* Object returned from AcpiOsCreateCache */ #ifndef ACPI_CACHE_T #ifdef ACPI_USE_LOCAL_CACHE #define ACPI_CACHE_T ACPI_MEMORY_LIST #else #define ACPI_CACHE_T void * #endif #endif /* * Synchronization objects - Mutexes, Semaphores, and SpinLocks */ #if (ACPI_MUTEX_TYPE == ACPI_BINARY_SEMAPHORE) /* * These macros are used if the host OS does not support a mutex object. * Map the OSL Mutex interfaces to binary semaphores. */ #define ACPI_MUTEX ACPI_SEMAPHORE #define AcpiOsCreateMutex(OutHandle) AcpiOsCreateSemaphore (1, 1, OutHandle) #define AcpiOsDeleteMutex(Handle) (void) AcpiOsDeleteSemaphore (Handle) #define AcpiOsAcquireMutex(Handle,Time) AcpiOsWaitSemaphore (Handle, 1, Time) #define AcpiOsReleaseMutex(Handle) (void) AcpiOsSignalSemaphore (Handle, 1) #endif /* Configurable types for synchronization objects */ #ifndef ACPI_SPINLOCK #define ACPI_SPINLOCK void * #endif #ifndef ACPI_SEMAPHORE #define ACPI_SEMAPHORE void * #endif #ifndef ACPI_MUTEX #define ACPI_MUTEX void * #endif /******************************************************************************* * * Compiler-dependent types * * If the defaults below are not appropriate for the host compiler, they can * be defined in the compiler-specific header, and this will take precedence. * ******************************************************************************/ /* Use C99 uintptr_t for pointer casting if available, "void *" otherwise */ #ifndef ACPI_UINTPTR_T #define ACPI_UINTPTR_T void * #endif /* * ACPI_PRINTF_LIKE is used to tag functions as "printf-like" because * some compilers can catch printf format string problems */ #ifndef ACPI_PRINTF_LIKE #define ACPI_PRINTF_LIKE(c) #endif /* * Some compilers complain about unused variables. Sometimes we don't want to * use all the variables (for example, _AcpiModuleName). This allows us * to tell the compiler in a per-variable manner that a variable * is unused */ #ifndef ACPI_UNUSED_VAR #define ACPI_UNUSED_VAR #endif /* * All ACPICA external functions that are available to the rest of the kernel * are tagged with thes macros which can be defined as appropriate for the host. * * Notes: * ACPI_EXPORT_SYMBOL_INIT is used for initialization and termination * interfaces that may need special processing. * ACPI_EXPORT_SYMBOL is used for all other public external functions. */ #ifndef ACPI_EXPORT_SYMBOL_INIT #define ACPI_EXPORT_SYMBOL_INIT(Symbol) #endif #ifndef ACPI_EXPORT_SYMBOL #define ACPI_EXPORT_SYMBOL(Symbol) #endif /* * Compiler/Clibrary-dependent debug initialization. Used for ACPICA * utilities only. */ #ifndef ACPI_DEBUG_INITIALIZE #define ACPI_DEBUG_INITIALIZE() #endif /******************************************************************************* * * Configuration * ******************************************************************************/ #ifdef ACPI_NO_MEM_ALLOCATIONS #define ACPI_ALLOCATE(a) NULL #define ACPI_ALLOCATE_ZEROED(a) NULL #define ACPI_FREE(a) #define ACPI_MEM_TRACKING(a) #else /* ACPI_NO_MEM_ALLOCATIONS */ #ifdef ACPI_DBG_TRACK_ALLOCATIONS /* * Memory allocation tracking (used by AcpiExec to detect memory leaks) */ #define ACPI_MEM_PARAMETERS _COMPONENT, _AcpiModuleName, __LINE__ #define ACPI_ALLOCATE(a) AcpiUtAllocateAndTrack ((ACPI_SIZE) (a), ACPI_MEM_PARAMETERS) #define ACPI_ALLOCATE_ZEROED(a) AcpiUtAllocateZeroedAndTrack ((ACPI_SIZE) (a), ACPI_MEM_PARAMETERS) #define ACPI_FREE(a) AcpiUtFreeAndTrack (a, ACPI_MEM_PARAMETERS) #define ACPI_MEM_TRACKING(a) a #else /* * Normal memory allocation directly via the OS services layer */ #define ACPI_ALLOCATE(a) AcpiOsAllocate ((ACPI_SIZE) (a)) #define ACPI_ALLOCATE_ZEROED(a) AcpiOsAllocateZeroed ((ACPI_SIZE) (a)) #define ACPI_FREE(a) AcpiOsFree (a) #define ACPI_MEM_TRACKING(a) #endif /* ACPI_DBG_TRACK_ALLOCATIONS */ #endif /* ACPI_NO_MEM_ALLOCATIONS */ /****************************************************************************** * * ACPI Specification constants (Do not change unless the specification changes) * *****************************************************************************/ /* Number of distinct FADT-based GPE register blocks (GPE0 and GPE1) */ #define ACPI_MAX_GPE_BLOCKS 2 /* Default ACPI register widths */ #define ACPI_GPE_REGISTER_WIDTH 8 #define ACPI_PM1_REGISTER_WIDTH 16 #define ACPI_PM2_REGISTER_WIDTH 8 #define ACPI_PM_TIMER_WIDTH 32 #define ACPI_RESET_REGISTER_WIDTH 8 /* Names within the namespace are 4 bytes long */ #define ACPI_NAME_SIZE 4 #define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */ #define ACPI_PATH_SEPARATOR '.' /* Sizes for ACPI table headers */ #define ACPI_OEM_ID_SIZE 6 #define ACPI_OEM_TABLE_ID_SIZE 8 /* ACPI/PNP hardware IDs */ #define PCI_ROOT_HID_STRING "PNP0A03" #define PCI_EXPRESS_ROOT_HID_STRING "PNP0A08" /* PM Timer ticks per second (HZ) */ #define ACPI_PM_TIMER_FREQUENCY 3579545 /******************************************************************************* * * Independent types * ******************************************************************************/ /* Logical defines and NULL */ #ifdef FALSE #undef FALSE #endif #define FALSE (1 == 0) #ifdef TRUE #undef TRUE #endif #define TRUE (1 == 1) #ifndef NULL #define NULL (void *) 0 #endif /* * Miscellaneous types */ typedef UINT32 ACPI_STATUS; /* All ACPI Exceptions */ typedef UINT32 ACPI_NAME; /* 4-byte ACPI name */ typedef char * ACPI_STRING; /* Null terminated ASCII string */ typedef void * ACPI_HANDLE; /* Actually a ptr to a NS Node */ /* Time constants for timer calculations */ #define ACPI_MSEC_PER_SEC 1000L #define ACPI_USEC_PER_MSEC 1000L #define ACPI_USEC_PER_SEC 1000000L #define ACPI_100NSEC_PER_USEC 10L #define ACPI_100NSEC_PER_MSEC 10000L #define ACPI_100NSEC_PER_SEC 10000000L #define ACPI_NSEC_PER_USEC 1000L #define ACPI_NSEC_PER_MSEC 1000000L #define ACPI_NSEC_PER_SEC 1000000000L /* Owner IDs are used to track namespace nodes for selective deletion */ typedef UINT8 ACPI_OWNER_ID; #define ACPI_OWNER_ID_MAX 0xFF #define ACPI_INTEGER_BIT_SIZE 64 #define ACPI_MAX_DECIMAL_DIGITS 20 /* 2^64 = 18,446,744,073,709,551,616 */ #define ACPI_MAX64_DECIMAL_DIGITS 20 #define ACPI_MAX32_DECIMAL_DIGITS 10 #define ACPI_MAX16_DECIMAL_DIGITS 5 #define ACPI_MAX8_DECIMAL_DIGITS 3 /* * Constants with special meanings */ #define ACPI_ROOT_OBJECT ACPI_ADD_PTR (ACPI_HANDLE, NULL, ACPI_MAX_PTR) #define ACPI_WAIT_FOREVER 0xFFFF /* UINT16, as per ACPI spec */ #define ACPI_DO_NOT_WAIT 0 /* * Obsolete: Acpi integer width. In ACPI version 1 (1996), integers are 32 bits. * In ACPI version 2 (2000) and later, integers are 64 bits. Note that this * pertains to the ACPI integer type only, not to other integers used in the * implementation of the ACPICA subsystem. * * 01/2010: This type is obsolete and has been removed from the entire ACPICA * code base. It remains here for compatibility with device drivers that use * the type. However, it will be removed in the future. */ typedef UINT64 ACPI_INTEGER; #define ACPI_INTEGER_MAX ACPI_UINT64_MAX /******************************************************************************* * * Commonly used macros * ******************************************************************************/ /* Data manipulation */ #define ACPI_LOBYTE(Integer) ((UINT8) (UINT16)(Integer)) #define ACPI_HIBYTE(Integer) ((UINT8) (((UINT16)(Integer)) >> 8)) #define ACPI_LOWORD(Integer) ((UINT16) (UINT32)(Integer)) #define ACPI_HIWORD(Integer) ((UINT16)(((UINT32)(Integer)) >> 16)) #define ACPI_LODWORD(Integer64) ((UINT32) (UINT64)(Integer64)) #define ACPI_HIDWORD(Integer64) ((UINT32)(((UINT64)(Integer64)) >> 32)) #define ACPI_SET_BIT(target,bit) ((target) |= (bit)) #define ACPI_CLEAR_BIT(target,bit) ((target) &= ~(bit)) #define ACPI_MIN(a,b) (((a)<(b))?(a):(b)) #define ACPI_MAX(a,b) (((a)>(b))?(a):(b)) /* Size calculation */ #define ACPI_ARRAY_LENGTH(x) (sizeof(x) / sizeof((x)[0])) /* Pointer manipulation */ #define ACPI_CAST_PTR(t, p) ((t *) (ACPI_UINTPTR_T) (p)) #define ACPI_CAST_INDIRECT_PTR(t, p) ((t **) (ACPI_UINTPTR_T) (p)) #define ACPI_ADD_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (UINT8, (a)) + (ACPI_SIZE)(b))) #define ACPI_SUB_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (UINT8, (a)) - (ACPI_SIZE)(b))) #define ACPI_PTR_DIFF(a, b) (ACPI_SIZE) (ACPI_CAST_PTR (UINT8, (a)) - ACPI_CAST_PTR (UINT8, (b))) /* Pointer/Integer type conversions */ #define ACPI_TO_POINTER(i) ACPI_ADD_PTR (void, (void *) NULL,(ACPI_SIZE) i) #define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p, (void *) NULL) #define ACPI_OFFSET(d, f) ACPI_PTR_DIFF (&(((d *) 0)->f), (void *) NULL) #define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i) #define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i) /* Optimizations for 4-character (32-bit) ACPI_NAME manipulation */ #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED #define ACPI_COMPARE_NAME(a,b) (*ACPI_CAST_PTR (UINT32, (a)) == *ACPI_CAST_PTR (UINT32, (b))) #define ACPI_MOVE_NAME(dest,src) (*ACPI_CAST_PTR (UINT32, (dest)) = *ACPI_CAST_PTR (UINT32, (src))) #else #define ACPI_COMPARE_NAME(a,b) (!strncmp (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAME_SIZE)) #define ACPI_MOVE_NAME(dest,src) (strncpy (ACPI_CAST_PTR (char, (dest)), ACPI_CAST_PTR (char, (src)), ACPI_NAME_SIZE)) #endif /* Support for the special RSDP signature (8 characters) */ #define ACPI_VALIDATE_RSDP_SIG(a) (!strncmp (ACPI_CAST_PTR (char, (a)), ACPI_SIG_RSDP, 8)) #define ACPI_MAKE_RSDP_SIG(dest) (memcpy (ACPI_CAST_PTR (char, (dest)), ACPI_SIG_RSDP, 8)) /******************************************************************************* * * Miscellaneous constants * ******************************************************************************/ /* * Initialization sequence */ #define ACPI_FULL_INITIALIZATION 0x00 #define ACPI_NO_ADDRESS_SPACE_INIT 0x01 #define ACPI_NO_HARDWARE_INIT 0x02 #define ACPI_NO_EVENT_INIT 0x04 #define ACPI_NO_HANDLER_INIT 0x08 #define ACPI_NO_ACPI_ENABLE 0x10 #define ACPI_NO_DEVICE_INIT 0x20 #define ACPI_NO_OBJECT_INIT 0x40 #define ACPI_NO_FACS_INIT 0x80 /* * Initialization state */ #define ACPI_SUBSYSTEM_INITIALIZE 0x01 #define ACPI_INITIALIZED_OK 0x02 /* * Power state values */ #define ACPI_STATE_UNKNOWN (UINT8) 0xFF #define ACPI_STATE_S0 (UINT8) 0 #define ACPI_STATE_S1 (UINT8) 1 #define ACPI_STATE_S2 (UINT8) 2 #define ACPI_STATE_S3 (UINT8) 3 #define ACPI_STATE_S4 (UINT8) 4 #define ACPI_STATE_S5 (UINT8) 5 #define ACPI_S_STATES_MAX ACPI_STATE_S5 #define ACPI_S_STATE_COUNT 6 #define ACPI_STATE_D0 (UINT8) 0 #define ACPI_STATE_D1 (UINT8) 1 #define ACPI_STATE_D2 (UINT8) 2 #define ACPI_STATE_D3 (UINT8) 3 #define ACPI_D_STATES_MAX ACPI_STATE_D3 #define ACPI_D_STATE_COUNT 4 #define ACPI_STATE_C0 (UINT8) 0 #define ACPI_STATE_C1 (UINT8) 1 #define ACPI_STATE_C2 (UINT8) 2 #define ACPI_STATE_C3 (UINT8) 3 #define ACPI_C_STATES_MAX ACPI_STATE_C3 #define ACPI_C_STATE_COUNT 4 /* * Sleep type invalid value */ #define ACPI_SLEEP_TYPE_MAX 0x7 #define ACPI_SLEEP_TYPE_INVALID 0xFF /* * Standard notify values */ #define ACPI_NOTIFY_BUS_CHECK (UINT8) 0x00 #define ACPI_NOTIFY_DEVICE_CHECK (UINT8) 0x01 #define ACPI_NOTIFY_DEVICE_WAKE (UINT8) 0x02 #define ACPI_NOTIFY_EJECT_REQUEST (UINT8) 0x03 #define ACPI_NOTIFY_DEVICE_CHECK_LIGHT (UINT8) 0x04 #define ACPI_NOTIFY_FREQUENCY_MISMATCH (UINT8) 0x05 #define ACPI_NOTIFY_BUS_MODE_MISMATCH (UINT8) 0x06 #define ACPI_NOTIFY_POWER_FAULT (UINT8) 0x07 #define ACPI_NOTIFY_CAPABILITIES_CHECK (UINT8) 0x08 #define ACPI_NOTIFY_DEVICE_PLD_CHECK (UINT8) 0x09 #define ACPI_NOTIFY_RESERVED (UINT8) 0x0A #define ACPI_NOTIFY_LOCALITY_UPDATE (UINT8) 0x0B #define ACPI_NOTIFY_SHUTDOWN_REQUEST (UINT8) 0x0C #define ACPI_NOTIFY_AFFINITY_UPDATE (UINT8) 0x0D #define ACPI_GENERIC_NOTIFY_MAX 0x0D #define ACPI_SPECIFIC_NOTIFY_MAX 0x84 /* * Types associated with ACPI names and objects. The first group of * values (up to ACPI_TYPE_EXTERNAL_MAX) correspond to the definition * of the ACPI ObjectType() operator (See the ACPI Spec). Therefore, * only add to the first group if the spec changes. * * NOTE: Types must be kept in sync with the global AcpiNsProperties * and AcpiNsTypeNames arrays. */ typedef UINT32 ACPI_OBJECT_TYPE; #define ACPI_TYPE_ANY 0x00 #define ACPI_TYPE_INTEGER 0x01 /* Byte/Word/Dword/Zero/One/Ones */ #define ACPI_TYPE_STRING 0x02 #define ACPI_TYPE_BUFFER 0x03 #define ACPI_TYPE_PACKAGE 0x04 /* ByteConst, multiple DataTerm/Constant/SuperName */ #define ACPI_TYPE_FIELD_UNIT 0x05 #define ACPI_TYPE_DEVICE 0x06 /* Name, multiple Node */ #define ACPI_TYPE_EVENT 0x07 #define ACPI_TYPE_METHOD 0x08 /* Name, ByteConst, multiple Code */ #define ACPI_TYPE_MUTEX 0x09 #define ACPI_TYPE_REGION 0x0A #define ACPI_TYPE_POWER 0x0B /* Name,ByteConst,WordConst,multi Node */ #define ACPI_TYPE_PROCESSOR 0x0C /* Name,ByteConst,DWordConst,ByteConst,multi NmO */ #define ACPI_TYPE_THERMAL 0x0D /* Name, multiple Node */ #define ACPI_TYPE_BUFFER_FIELD 0x0E #define ACPI_TYPE_DDB_HANDLE 0x0F #define ACPI_TYPE_DEBUG_OBJECT 0x10 #define ACPI_TYPE_EXTERNAL_MAX 0x10 #define ACPI_NUM_TYPES (ACPI_TYPE_EXTERNAL_MAX + 1) /* * These are object types that do not map directly to the ACPI * ObjectType() operator. They are used for various internal purposes only. * If new predefined ACPI_TYPEs are added (via the ACPI specification), these * internal types must move upwards. (There is code that depends on these * values being contiguous with the external types above.) */ #define ACPI_TYPE_LOCAL_REGION_FIELD 0x11 #define ACPI_TYPE_LOCAL_BANK_FIELD 0x12 #define ACPI_TYPE_LOCAL_INDEX_FIELD 0x13 #define ACPI_TYPE_LOCAL_REFERENCE 0x14 /* Arg#, Local#, Name, Debug, RefOf, Index */ #define ACPI_TYPE_LOCAL_ALIAS 0x15 #define ACPI_TYPE_LOCAL_METHOD_ALIAS 0x16 #define ACPI_TYPE_LOCAL_NOTIFY 0x17 #define ACPI_TYPE_LOCAL_ADDRESS_HANDLER 0x18 #define ACPI_TYPE_LOCAL_RESOURCE 0x19 #define ACPI_TYPE_LOCAL_RESOURCE_FIELD 0x1A #define ACPI_TYPE_LOCAL_SCOPE 0x1B /* 1 Name, multiple ObjectList Nodes */ #define ACPI_TYPE_NS_NODE_MAX 0x1B /* Last typecode used within a NS Node */ #define ACPI_TOTAL_TYPES (ACPI_TYPE_NS_NODE_MAX + 1) /* * These are special object types that never appear in * a Namespace node, only in an object of ACPI_OPERAND_OBJECT */ #define ACPI_TYPE_LOCAL_EXTRA 0x1C #define ACPI_TYPE_LOCAL_DATA 0x1D #define ACPI_TYPE_LOCAL_MAX 0x1D /* All types above here are invalid */ #define ACPI_TYPE_INVALID 0x1E #define ACPI_TYPE_NOT_FOUND 0xFF #define ACPI_NUM_NS_TYPES (ACPI_TYPE_INVALID + 1) /* * All I/O */ #define ACPI_READ 0 #define ACPI_WRITE 1 #define ACPI_IO_MASK 1 /* * Event Types: Fixed & General Purpose */ typedef UINT32 ACPI_EVENT_TYPE; /* * Fixed events */ #define ACPI_EVENT_PMTIMER 0 #define ACPI_EVENT_GLOBAL 1 #define ACPI_EVENT_POWER_BUTTON 2 #define ACPI_EVENT_SLEEP_BUTTON 3 #define ACPI_EVENT_RTC 4 #define ACPI_EVENT_MAX 4 #define ACPI_NUM_FIXED_EVENTS ACPI_EVENT_MAX + 1 /* * Event Status - Per event * ------------- * The encoding of ACPI_EVENT_STATUS is illustrated below. * Note that a set bit (1) indicates the property is TRUE * (e.g. if bit 0 is set then the event is enabled). * +-------------+-+-+-+-+-+ * | Bits 31:5 |4|3|2|1|0| * +-------------+-+-+-+-+-+ * | | | | | | * | | | | | +- Enabled? * | | | | +--- Enabled for wake? * | | | +----- Status bit set? * | | +------- Enable bit set? * | +--------- Has a handler? * +--------------- */ typedef UINT32 ACPI_EVENT_STATUS; #define ACPI_EVENT_FLAG_DISABLED (ACPI_EVENT_STATUS) 0x00 #define ACPI_EVENT_FLAG_ENABLED (ACPI_EVENT_STATUS) 0x01 #define ACPI_EVENT_FLAG_WAKE_ENABLED (ACPI_EVENT_STATUS) 0x02 #define ACPI_EVENT_FLAG_STATUS_SET (ACPI_EVENT_STATUS) 0x04 #define ACPI_EVENT_FLAG_ENABLE_SET (ACPI_EVENT_STATUS) 0x08 #define ACPI_EVENT_FLAG_HAS_HANDLER (ACPI_EVENT_STATUS) 0x10 #define ACPI_EVENT_FLAG_SET ACPI_EVENT_FLAG_STATUS_SET /* Actions for AcpiSetGpe, AcpiGpeWakeup, AcpiHwLowSetGpe */ #define ACPI_GPE_ENABLE 0 #define ACPI_GPE_DISABLE 1 #define ACPI_GPE_CONDITIONAL_ENABLE 2 /* * GPE info flags - Per GPE * +-------+-+-+---+ * | 7:5 |4|3|2:0| * +-------+-+-+---+ * | | | | * | | | +-- Type of dispatch:to method, handler, notify, or none * | | +----- Interrupt type: edge or level triggered * | +------- Is a Wake GPE * +------------ */ #define ACPI_GPE_DISPATCH_NONE (UINT8) 0x00 #define ACPI_GPE_DISPATCH_METHOD (UINT8) 0x01 #define ACPI_GPE_DISPATCH_HANDLER (UINT8) 0x02 #define ACPI_GPE_DISPATCH_NOTIFY (UINT8) 0x03 #define ACPI_GPE_DISPATCH_RAW_HANDLER (UINT8) 0x04 #define ACPI_GPE_DISPATCH_MASK (UINT8) 0x07 #define ACPI_GPE_DISPATCH_TYPE(flags) ((UINT8) ((flags) & ACPI_GPE_DISPATCH_MASK)) #define ACPI_GPE_LEVEL_TRIGGERED (UINT8) 0x08 #define ACPI_GPE_EDGE_TRIGGERED (UINT8) 0x00 #define ACPI_GPE_XRUPT_TYPE_MASK (UINT8) 0x08 #define ACPI_GPE_CAN_WAKE (UINT8) 0x10 /* * Flags for GPE and Lock interfaces */ #define ACPI_NOT_ISR 0x1 #define ACPI_ISR 0x0 /* Notify types */ #define ACPI_SYSTEM_NOTIFY 0x1 #define ACPI_DEVICE_NOTIFY 0x2 #define ACPI_ALL_NOTIFY (ACPI_SYSTEM_NOTIFY | ACPI_DEVICE_NOTIFY) #define ACPI_MAX_NOTIFY_HANDLER_TYPE 0x3 #define ACPI_NUM_NOTIFY_TYPES 2 #define ACPI_MAX_SYS_NOTIFY 0x7F #define ACPI_MAX_DEVICE_SPECIFIC_NOTIFY 0xBF #define ACPI_SYSTEM_HANDLER_LIST 0 /* Used as index, must be SYSTEM_NOTIFY -1 */ #define ACPI_DEVICE_HANDLER_LIST 1 /* Used as index, must be DEVICE_NOTIFY -1 */ /* Address Space (Operation Region) Types */ typedef UINT8 ACPI_ADR_SPACE_TYPE; #define ACPI_ADR_SPACE_SYSTEM_MEMORY (ACPI_ADR_SPACE_TYPE) 0 #define ACPI_ADR_SPACE_SYSTEM_IO (ACPI_ADR_SPACE_TYPE) 1 #define ACPI_ADR_SPACE_PCI_CONFIG (ACPI_ADR_SPACE_TYPE) 2 #define ACPI_ADR_SPACE_EC (ACPI_ADR_SPACE_TYPE) 3 #define ACPI_ADR_SPACE_SMBUS (ACPI_ADR_SPACE_TYPE) 4 #define ACPI_ADR_SPACE_CMOS (ACPI_ADR_SPACE_TYPE) 5 #define ACPI_ADR_SPACE_PCI_BAR_TARGET (ACPI_ADR_SPACE_TYPE) 6 #define ACPI_ADR_SPACE_IPMI (ACPI_ADR_SPACE_TYPE) 7 #define ACPI_ADR_SPACE_GPIO (ACPI_ADR_SPACE_TYPE) 8 #define ACPI_ADR_SPACE_GSBUS (ACPI_ADR_SPACE_TYPE) 9 #define ACPI_ADR_SPACE_PLATFORM_COMM (ACPI_ADR_SPACE_TYPE) 10 #define ACPI_NUM_PREDEFINED_REGIONS 11 /* * Special Address Spaces * * Note: A Data Table region is a special type of operation region * that has its own AML opcode. However, internally, the AML * interpreter simply creates an operation region with an an address * space type of ACPI_ADR_SPACE_DATA_TABLE. */ #define ACPI_ADR_SPACE_DATA_TABLE (ACPI_ADR_SPACE_TYPE) 0x7E /* Internal to ACPICA only */ #define ACPI_ADR_SPACE_FIXED_HARDWARE (ACPI_ADR_SPACE_TYPE) 0x7F /* Values for _REG connection code */ #define ACPI_REG_DISCONNECT 0 #define ACPI_REG_CONNECT 1 /* * BitRegister IDs * * These values are intended to be used by the hardware interfaces * and are mapped to individual bitfields defined within the ACPI * registers. See the AcpiGbl_BitRegisterInfo global table in utglobal.c * for this mapping. */ /* PM1 Status register */ #define ACPI_BITREG_TIMER_STATUS 0x00 #define ACPI_BITREG_BUS_MASTER_STATUS 0x01 #define ACPI_BITREG_GLOBAL_LOCK_STATUS 0x02 #define ACPI_BITREG_POWER_BUTTON_STATUS 0x03 #define ACPI_BITREG_SLEEP_BUTTON_STATUS 0x04 #define ACPI_BITREG_RT_CLOCK_STATUS 0x05 #define ACPI_BITREG_WAKE_STATUS 0x06 #define ACPI_BITREG_PCIEXP_WAKE_STATUS 0x07 /* PM1 Enable register */ #define ACPI_BITREG_TIMER_ENABLE 0x08 #define ACPI_BITREG_GLOBAL_LOCK_ENABLE 0x09 #define ACPI_BITREG_POWER_BUTTON_ENABLE 0x0A #define ACPI_BITREG_SLEEP_BUTTON_ENABLE 0x0B #define ACPI_BITREG_RT_CLOCK_ENABLE 0x0C #define ACPI_BITREG_PCIEXP_WAKE_DISABLE 0x0D /* PM1 Control register */ #define ACPI_BITREG_SCI_ENABLE 0x0E #define ACPI_BITREG_BUS_MASTER_RLD 0x0F #define ACPI_BITREG_GLOBAL_LOCK_RELEASE 0x10 #define ACPI_BITREG_SLEEP_TYPE 0x11 #define ACPI_BITREG_SLEEP_ENABLE 0x12 /* PM2 Control register */ #define ACPI_BITREG_ARB_DISABLE 0x13 #define ACPI_BITREG_MAX 0x13 #define ACPI_NUM_BITREG ACPI_BITREG_MAX + 1 /* Status register values. A 1 clears a status bit. 0 = no effect */ #define ACPI_CLEAR_STATUS 1 /* Enable and Control register values */ #define ACPI_ENABLE_EVENT 1 #define ACPI_DISABLE_EVENT 0 /* Sleep function dispatch */ typedef ACPI_STATUS (*ACPI_SLEEP_FUNCTION) ( UINT8 SleepState); typedef struct acpi_sleep_functions { ACPI_SLEEP_FUNCTION LegacyFunction; ACPI_SLEEP_FUNCTION ExtendedFunction; } ACPI_SLEEP_FUNCTIONS; /* * External ACPI object definition */ /* * Note: Type == ACPI_TYPE_ANY (0) is used to indicate a NULL package element * or an unresolved named reference. */ typedef union acpi_object { ACPI_OBJECT_TYPE Type; /* See definition of AcpiNsType for values */ struct { ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_INTEGER */ UINT64 Value; /* The actual number */ } Integer; struct { ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_STRING */ UINT32 Length; /* # of bytes in string, excluding trailing null */ char *Pointer; /* points to the string value */ } String; struct { ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_BUFFER */ UINT32 Length; /* # of bytes in buffer */ UINT8 *Pointer; /* points to the buffer */ } Buffer; struct { ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_PACKAGE */ UINT32 Count; /* # of elements in package */ union acpi_object *Elements; /* Pointer to an array of ACPI_OBJECTs */ } Package; struct { ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_LOCAL_REFERENCE */ ACPI_OBJECT_TYPE ActualType; /* Type associated with the Handle */ ACPI_HANDLE Handle; /* object reference */ } Reference; struct { ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_PROCESSOR */ UINT32 ProcId; ACPI_IO_ADDRESS PblkAddress; UINT32 PblkLength; } Processor; struct { ACPI_OBJECT_TYPE Type; /* ACPI_TYPE_POWER */ UINT32 SystemLevel; UINT32 ResourceOrder; } PowerResource; } ACPI_OBJECT; /* * List of objects, used as a parameter list for control method evaluation */ typedef struct acpi_object_list { UINT32 Count; ACPI_OBJECT *Pointer; } ACPI_OBJECT_LIST; /* * Miscellaneous common Data Structures used by the interfaces */ #define ACPI_NO_BUFFER 0 #ifdef ACPI_NO_MEM_ALLOCATIONS #define ACPI_ALLOCATE_BUFFER (ACPI_SIZE) (0) #define ACPI_ALLOCATE_LOCAL_BUFFER (ACPI_SIZE) (0) #else /* ACPI_NO_MEM_ALLOCATIONS */ #define ACPI_ALLOCATE_BUFFER (ACPI_SIZE) (-1) /* Let ACPICA allocate buffer */ #define ACPI_ALLOCATE_LOCAL_BUFFER (ACPI_SIZE) (-2) /* For internal use only (enables tracking) */ #endif /* ACPI_NO_MEM_ALLOCATIONS */ typedef struct acpi_buffer { ACPI_SIZE Length; /* Length in bytes of the buffer */ void *Pointer; /* pointer to buffer */ } ACPI_BUFFER; /* * NameType for AcpiGetName */ #define ACPI_FULL_PATHNAME 0 #define ACPI_SINGLE_NAME 1 #define ACPI_FULL_PATHNAME_NO_TRAILING 2 #define ACPI_NAME_TYPE_MAX 2 /* * Predefined Namespace items */ typedef struct acpi_predefined_names { char *Name; UINT8 Type; char *Val; } ACPI_PREDEFINED_NAMES; /* * Structure and flags for AcpiGetSystemInfo */ #define ACPI_SYS_MODE_UNKNOWN 0x0000 #define ACPI_SYS_MODE_ACPI 0x0001 #define ACPI_SYS_MODE_LEGACY 0x0002 #define ACPI_SYS_MODES_MASK 0x0003 /* * System info returned by AcpiGetSystemInfo() */ typedef struct acpi_system_info { UINT32 AcpiCaVersion; UINT32 Flags; UINT32 TimerResolution; UINT32 Reserved1; UINT32 Reserved2; UINT32 DebugLevel; UINT32 DebugLayer; } ACPI_SYSTEM_INFO; /* * System statistics returned by AcpiGetStatistics() */ typedef struct acpi_statistics { UINT32 SciCount; UINT32 GpeCount; UINT32 FixedEventCount[ACPI_NUM_FIXED_EVENTS]; UINT32 MethodCount; } ACPI_STATISTICS; /* Table Event Types */ #define ACPI_TABLE_EVENT_LOAD 0x0 #define ACPI_TABLE_EVENT_UNLOAD 0x1 #define ACPI_NUM_TABLE_EVENTS 2 /* * Types specific to the OS service interfaces */ typedef UINT32 (ACPI_SYSTEM_XFACE *ACPI_OSD_HANDLER) ( void *Context); typedef void (ACPI_SYSTEM_XFACE *ACPI_OSD_EXEC_CALLBACK) ( void *Context); /* * Various handlers and callback procedures */ typedef UINT32 (*ACPI_SCI_HANDLER) ( void *Context); typedef void (*ACPI_GBL_EVENT_HANDLER) ( UINT32 EventType, ACPI_HANDLE Device, UINT32 EventNumber, void *Context); #define ACPI_EVENT_TYPE_GPE 0 #define ACPI_EVENT_TYPE_FIXED 1 typedef UINT32 (*ACPI_EVENT_HANDLER) ( void *Context); typedef UINT32 (*ACPI_GPE_HANDLER) ( ACPI_HANDLE GpeDevice, UINT32 GpeNumber, void *Context); typedef void (*ACPI_NOTIFY_HANDLER) ( ACPI_HANDLE Device, UINT32 Value, void *Context); typedef void (*ACPI_OBJECT_HANDLER) ( ACPI_HANDLE Object, void *Data); typedef ACPI_STATUS (*ACPI_INIT_HANDLER) ( ACPI_HANDLE Object, UINT32 Function); #define ACPI_INIT_DEVICE_INI 1 typedef ACPI_STATUS (*ACPI_EXCEPTION_HANDLER) ( ACPI_STATUS AmlStatus, ACPI_NAME Name, UINT16 Opcode, UINT32 AmlOffset, void *Context); /* Table Event handler (Load, LoadTable, etc.) and types */ typedef ACPI_STATUS (*ACPI_TABLE_HANDLER) ( UINT32 Event, void *Table, void *Context); #define ACPI_TABLE_LOAD 0x0 #define ACPI_TABLE_UNLOAD 0x1 #define ACPI_NUM_TABLE_EVENTS 2 /* Address Spaces (For Operation Regions) */ typedef ACPI_STATUS (*ACPI_ADR_SPACE_HANDLER) ( UINT32 Function, ACPI_PHYSICAL_ADDRESS Address, UINT32 BitWidth, UINT64 *Value, void *HandlerContext, void *RegionContext); #define ACPI_DEFAULT_HANDLER NULL /* Special Context data for GenericSerialBus/GeneralPurposeIo (ACPI 5.0) */ typedef struct acpi_connection_info { UINT8 *Connection; UINT16 Length; UINT8 AccessLength; } ACPI_CONNECTION_INFO; typedef ACPI_STATUS (*ACPI_ADR_SPACE_SETUP) ( ACPI_HANDLE RegionHandle, UINT32 Function, void *HandlerContext, void **RegionContext); #define ACPI_REGION_ACTIVATE 0 #define ACPI_REGION_DEACTIVATE 1 typedef ACPI_STATUS (*ACPI_WALK_CALLBACK) ( ACPI_HANDLE Object, UINT32 NestingLevel, void *Context, void **ReturnValue); typedef UINT32 (*ACPI_INTERFACE_HANDLER) ( ACPI_STRING InterfaceName, UINT32 Supported); /* Interrupt handler return values */ #define ACPI_INTERRUPT_NOT_HANDLED 0x00 #define ACPI_INTERRUPT_HANDLED 0x01 /* GPE handler return values */ #define ACPI_REENABLE_GPE 0x80 /* Length of 32-bit EISAID values when converted back to a string */ #define ACPI_EISAID_STRING_SIZE 8 /* Includes null terminator */ /* Length of UUID (string) values */ #define ACPI_UUID_LENGTH 16 /* Length of 3-byte PCI class code values when converted back to a string */ #define ACPI_PCICLS_STRING_SIZE 7 /* Includes null terminator */ /* Structures used for device/processor HID, UID, CID */ typedef struct acpi_pnp_device_id { UINT32 Length; /* Length of string + null */ char *String; } ACPI_PNP_DEVICE_ID; typedef struct acpi_pnp_device_id_list { UINT32 Count; /* Number of IDs in Ids array */ UINT32 ListSize; /* Size of list, including ID strings */ ACPI_PNP_DEVICE_ID Ids[1]; /* ID array */ } ACPI_PNP_DEVICE_ID_LIST; /* * Structure returned from AcpiGetObjectInfo. * Optimized for both 32- and 64-bit builds */ typedef struct acpi_device_info { UINT32 InfoSize; /* Size of info, including ID strings */ UINT32 Name; /* ACPI object Name */ ACPI_OBJECT_TYPE Type; /* ACPI object Type */ UINT8 ParamCount; /* If a method, required parameter count */ UINT16 Valid; /* Indicates which optional fields are valid */ UINT8 Flags; /* Miscellaneous info */ UINT8 HighestDstates[4]; /* _SxD values: 0xFF indicates not valid */ UINT8 LowestDstates[5]; /* _SxW values: 0xFF indicates not valid */ UINT32 CurrentStatus; /* _STA value */ UINT64 Address; /* _ADR value */ ACPI_PNP_DEVICE_ID HardwareId; /* _HID value */ ACPI_PNP_DEVICE_ID UniqueId; /* _UID value */ ACPI_PNP_DEVICE_ID ClassCode; /* _CLS value */ ACPI_PNP_DEVICE_ID_LIST CompatibleIdList; /* _CID list */ } ACPI_DEVICE_INFO; /* Values for Flags field above (AcpiGetObjectInfo) */ #define ACPI_PCI_ROOT_BRIDGE 0x01 /* Flags for Valid field above (AcpiGetObjectInfo) */ #define ACPI_VALID_STA 0x0001 #define ACPI_VALID_ADR 0x0002 #define ACPI_VALID_HID 0x0004 #define ACPI_VALID_UID 0x0008 #define ACPI_VALID_CID 0x0020 #define ACPI_VALID_CLS 0x0040 #define ACPI_VALID_SXDS 0x0100 #define ACPI_VALID_SXWS 0x0200 /* Flags for _STA method */ #define ACPI_STA_DEVICE_PRESENT 0x01 #define ACPI_STA_DEVICE_ENABLED 0x02 #define ACPI_STA_DEVICE_UI 0x04 #define ACPI_STA_DEVICE_FUNCTIONING 0x08 #define ACPI_STA_DEVICE_OK 0x08 /* Synonym */ #define ACPI_STA_BATTERY_PRESENT 0x10 /* Context structs for address space handlers */ typedef struct acpi_pci_id { UINT16 Segment; UINT16 Bus; UINT16 Device; UINT16 Function; } ACPI_PCI_ID; typedef struct acpi_mem_space_context { UINT32 Length; ACPI_PHYSICAL_ADDRESS Address; ACPI_PHYSICAL_ADDRESS MappedPhysicalAddress; UINT8 *MappedLogicalAddress; ACPI_SIZE MappedLength; } ACPI_MEM_SPACE_CONTEXT; /* * ACPI_MEMORY_LIST is used only if the ACPICA local cache is enabled */ typedef struct acpi_memory_list { char *ListName; void *ListHead; UINT16 ObjectSize; UINT16 MaxDepth; UINT16 CurrentDepth; #ifdef ACPI_DBG_TRACK_ALLOCATIONS /* Statistics for debug memory tracking only */ UINT32 TotalAllocated; UINT32 TotalFreed; UINT32 MaxOccupied; UINT32 TotalSize; UINT32 CurrentTotalSize; UINT32 Requests; UINT32 Hits; #endif } ACPI_MEMORY_LIST; /* Definitions of trace event types */ typedef enum { ACPI_TRACE_AML_METHOD, ACPI_TRACE_AML_OPCODE, ACPI_TRACE_AML_REGION } ACPI_TRACE_EVENT_TYPE; /* Definitions of _OSI support */ #define ACPI_VENDOR_STRINGS 0x01 #define ACPI_FEATURE_STRINGS 0x02 #define ACPI_ENABLE_INTERFACES 0x00 #define ACPI_DISABLE_INTERFACES 0x04 #define ACPI_DISABLE_ALL_VENDOR_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_VENDOR_STRINGS) #define ACPI_DISABLE_ALL_FEATURE_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_FEATURE_STRINGS) #define ACPI_DISABLE_ALL_STRINGS (ACPI_DISABLE_INTERFACES | ACPI_VENDOR_STRINGS | ACPI_FEATURE_STRINGS) #define ACPI_ENABLE_ALL_VENDOR_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_VENDOR_STRINGS) #define ACPI_ENABLE_ALL_FEATURE_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_FEATURE_STRINGS) #define ACPI_ENABLE_ALL_STRINGS (ACPI_ENABLE_INTERFACES | ACPI_VENDOR_STRINGS | ACPI_FEATURE_STRINGS) #define ACPI_OSI_WIN_2000 0x01 #define ACPI_OSI_WIN_XP 0x02 #define ACPI_OSI_WIN_XP_SP1 0x03 #define ACPI_OSI_WINSRV_2003 0x04 #define ACPI_OSI_WIN_XP_SP2 0x05 #define ACPI_OSI_WINSRV_2003_SP1 0x06 #define ACPI_OSI_WIN_VISTA 0x07 #define ACPI_OSI_WINSRV_2008 0x08 #define ACPI_OSI_WIN_VISTA_SP1 0x09 #define ACPI_OSI_WIN_VISTA_SP2 0x0A #define ACPI_OSI_WIN_7 0x0B #define ACPI_OSI_WIN_8 0x0C #define ACPI_OSI_WIN_10 0x0D /* Definitions of file IO */ #define ACPI_FILE_READING 0x01 #define ACPI_FILE_WRITING 0x02 #define ACPI_FILE_BINARY 0x04 #define ACPI_FILE_BEGIN 0x01 #define ACPI_FILE_END 0x02 /* Definitions of getopt */ #define ACPI_OPT_END -1 #endif /* __ACTYPES_H__ */