//***************************************************************************** // // am_hal_reset.h //! @file //! //! @brief Hardware abstraction layer for the Reset Generator module. //! //! @addtogroup wdt2 Watchdog Timer (RSTGEN) //! @ingroup apollo2hal //! @{ // //***************************************************************************** //***************************************************************************** // // Copyright (c) 2020, Ambiq Micro // All rights reserved. // // Redistribution and use in source and binary forms, with or without // modification, are permitted provided that the following conditions are met: // // 1. Redistributions of source code must retain the above copyright notice, // this list of conditions and the following disclaimer. // // 2. Redistributions in binary form must reproduce the above copyright // notice, this list of conditions and the following disclaimer in the // documentation and/or other materials provided with the distribution. // // 3. Neither the name of the copyright holder nor the names of its // contributors may be used to endorse or promote products derived from this // software without specific prior written permission. // // Third party software included in this distribution is subject to the // additional license terms as defined in the /docs/licenses directory. // // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE // ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE // LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF // SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS // INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN // CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE // POSSIBILITY OF SUCH DAMAGE. // // This is part of revision 2.4.2 of the AmbiqSuite Development Package. // //***************************************************************************** #ifndef AM_HAL_RSTGEN_H #define AM_HAL_RSTGEN_H //***************************************************************************** // //! @name Reset Generator Configuration //! @brief These macros may be used to set the reset generator's configuration. //! @{ // //***************************************************************************** #define AM_HAL_RESET_CFG_WDT_RESET_ENABLE (AM_REG_RSTGEN_CFG_WDREN(1)) // Brown out high (2.1v) reset enable. #define AM_HAL_RESET_CFG_BOD_HIGH_RESET_ENABLE (AM_REG_RSTGEN_CFG_BODHREN(1)) //! @} //***************************************************************************** // //! @name Reset Generator Status Bit Masks //! @brief These macros may be used to determine which type(s) of resets have //! been seen. //! @{ // //***************************************************************************** // Reset was initiated by a Watchdog Timer Reset. #define AM_HAL_RESET_STAT_WDT (AM_REG_RSTGEN_STAT_WDRSTAT_M) // Reset was a initiated by Debugger Reset. #define AM_HAL_RESET_STAT_DEBUG (AM_REG_RSTGEN_STAT_DBGRSTAT_M) // Reset was a initiated by Software POI Reset. #define AM_HAL_RESET_STAT_POI (AM_REG_RSTGEN_STAT_POIRSTAT_M) // Reset was a initiated by Software POR or AIRCR Reset. #define AM_HAL_RESET_STAT_SOFTWARE (AM_REG_RSTGEN_STAT_SWRSTAT_M) // Reset was initiated by a Brown-Out Reset. #define AM_HAL_RESET_STAT_BOD (AM_REG_RSTGEN_STAT_BORSTAT_M) // Reset was initiated by a Power Cycle #define AM_HAL_RESET_STAT_POWER_CYCLE (AM_REG_RSTGEN_STAT_PORSTAT_M) // Reset was initiated by an External Reset. #define AM_HAL_RESET_STAT_EXTERNAL (AM_REG_RSTGEN_STAT_EXRSTAT_M) //! @} #ifdef __cplusplus extern "C" { #endif //***************************************************************************** // // External function definitions // //***************************************************************************** extern void am_hal_reset_init(uint32_t ui32Config); extern void am_hal_reset_por(void); extern void am_hal_reset_poi(void); extern uint32_t am_hal_reset_status_get(void); extern void am_hal_reset_status_clear(void); #ifdef __cplusplus } #endif #endif // AM_HAL_RSTGEN_H //***************************************************************************** // // End Doxygen group. //! @} // //*****************************************************************************