/* Copyright (c) 2009-2019 Arm Limited * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ /*************************************************************************************************/ /*! * \brief HCI constants and definitions from the Bluetooth specification. */ /*************************************************************************************************/ #ifndef HCI_DEFS_H #define HCI_DEFS_H #ifdef __cplusplus extern "C" { #endif /*! \addtogroup STACK_HCI_API * \{ */ /** \name Packet definitions * */ /**@{*/ #define HCI_CMD_HDR_LEN 3 /*!< \brief Command packet header length */ #define HCI_ACL_HDR_LEN 4 /*!< \brief ACL packet header length */ #define HCI_ISO_HDR_LEN 4 /*!< \brief ISO packet header length */ #define HCI_EVT_HDR_LEN 2 /*!< \brief Event packet header length */ #define HCI_EVT_PARAM_MAX_LEN 255 /*!< \brief Maximum length of event packet parameters */ #define HCI_ACL_DEFAULT_LEN 27 /*!< \brief Default maximum ACL packet length */ #define HCI_PB_FLAG_MASK 0x3000 /*!< \brief ACL packet boundary flag mask */ #define HCI_PB_START_H2C 0x0000 /*!< \brief Packet boundary flag, start, host-to-controller */ #define HCI_PB_CONTINUE 0x1000 /*!< \brief Packet boundary flag, continue */ #define HCI_PB_START_C2H 0x2000 /*!< \brief Packet boundary flag, start, controller-to-host */ #define HCI_HANDLE_MASK 0x0FFF /*!< \brief Mask for handle bits in ACL packet */ #define HCI_HANDLE_NONE 0xFFFF /*!< \brief Value for invalid handle */ /**@}*/ /** \name Packet types * */ #define HCI_CMD_TYPE 1 /*!< \brief HCI command packet */ #define HCI_ACL_TYPE 2 /*!< \brief HCI ACL data packet */ #define HCI_EVT_TYPE 4 /*!< \brief HCI event packet */ #define HCI_ISO_TYPE 5 /*!< \brief HCI ISO data packet */ /**@}*/ /** \name Error codes * */ /**@{*/ #define HCI_SUCCESS 0x00 /*!< \brief Success */ #define HCI_ERR_UNKNOWN_CMD 0x01 /*!< \brief Unknown HCI command */ #define HCI_ERR_UNKNOWN_HANDLE 0x02 /*!< \brief Unknown connection identifier */ #define HCI_ERR_HARDWARE_FAILURE 0x03 /*!< \brief Hardware failure */ #define HCI_ERR_PAGE_TIMEOUT 0x04 /*!< \brief Page timeout */ #define HCI_ERR_AUTH_FAILURE 0x05 /*!< \brief Authentication failure */ #define HCI_ERR_KEY_MISSING 0x06 /*!< \brief PIN or key missing */ #define HCI_ERR_MEMORY_EXCEEDED 0x07 /*!< \brief Memory capacity exceeded */ #define HCI_ERR_CONN_TIMEOUT 0x08 /*!< \brief Connection timeout */ #define HCI_ERR_CONN_LIMIT 0x09 /*!< \brief Connection limit exceeded */ #define HCI_ERR_SYNCH_CONN_LIMIT 0x0A /*!< \brief Synchronous connection limit exceeded */ #define HCI_ERR_ACL_CONN_EXISTS 0x0B /*!< \brief ACL connection already exists */ #define HCI_ERR_CMD_DISALLOWED 0x0C /*!< \brief Command disallowed */ #define HCI_ERR_REJ_RESOURCES 0x0D /*!< \brief Connection rejected limited resources */ #define HCI_ERR_REJ_SECURITY 0x0E /*!< \brief Connection rejected security reasons */ #define HCI_ERR_REJ_BD_ADDR 0x0F /*!< \brief Connection rejected unacceptable BD_ADDR */ #define HCI_ERR_ACCEPT_TIMEOUT 0x10 /*!< \brief Connection accept timeout exceeded */ #define HCI_ERR_UNSUP_FEAT 0x11 /*!< \brief Unsupported feature or parameter value */ #define HCI_ERR_INVALID_PARAM 0x12 /*!< \brief Invalid HCI command parameters */ #define HCI_ERR_REMOTE_TERMINATED 0x13 /*!< \brief Remote user terminated connection */ #define HCI_ERR_REMOTE_RESOURCES 0x14 /*!< \brief Remote device low resources */ #define HCI_ERR_REMOTE_POWER_OFF 0x15 /*!< \brief Remote device power off */ #define HCI_ERR_LOCAL_TERMINATED 0x16 /*!< \brief Connection terminated by local host */ #define HCI_ERR_REPEATED_ATTEMPTS 0x17 /*!< \brief Repeated attempts */ #define HCI_ERR_PAIRING_NOT_ALLOWED 0x18 /*!< \brief Pairing not allowed */ #define HCI_ERR_UNKNOWN_LMP_PDU 0x19 /*!< \brief Unknown LMP PDU */ #define HCI_ERR_UNSUP_REMOTE_FEAT 0x1A /*!< \brief Unsupported remote feature */ #define HCI_ERR_SCO_OFFSET 0x1B /*!< \brief SCO offset rejected */ #define HCI_ERR_SCO_INTERVAL 0x1C /*!< \brief SCO interval rejected */ #define HCI_ERR_SCO_MODE 0x1D /*!< \brief SCO air mode rejected */ #define HCI_ERR_LMP_PARAM 0x1E /*!< \brief Invalid LMP parameters */ #define HCI_ERR_UNSPECIFIED 0x1F /*!< \brief Unspecified error */ #define HCI_ERR_UNSUP_LMP_PARAM 0x20 /*!< \brief Unsupported LMP parameter value */ #define HCI_ERR_ROLE_CHANGE 0x21 /*!< \brief Role change not allowed */ #define HCI_ERR_LL_RESP_TIMEOUT 0x22 /*!< \brief LL response timeout */ #define HCI_ERR_LMP_COLLISION 0x23 /*!< \brief LMP error transaction collision */ #define HCI_ERR_LMP_PDU 0x24 /*!< \brief LMP pdu not allowed */ #define HCI_ERR_ENCRYPT_MODE 0x25 /*!< \brief Encryption mode not acceptable */ #define HCI_ERR_LINK_KEY 0x26 /*!< \brief Link key can not be changed */ #define HCI_ERR_UNSUP_QOS 0x27 /*!< \brief Requested qos not supported */ #define HCI_ERR_INSTANT_PASSED 0x28 /*!< \brief Instant passed */ #define HCI_ERR_UNSUP_UNIT_KEY 0x29 /*!< \brief Pairing with unit key not supported */ #define HCI_ERR_TRANSACT_COLLISION 0x2A /*!< \brief Different transaction collision */ #define HCI_ERR_CHANNEL_CLASS 0x2E /*!< \brief Channel classification not supported */ #define HCI_ERR_MEMORY 0x2F /*!< \brief Insufficient security */ #define HCI_ERR_PARAMETER_RANGE 0x30 /*!< \brief Parameter out of mandatory range */ #define HCI_ERR_ROLE_SWITCH_PEND 0x32 /*!< \brief Role switch pending */ #define HCI_ERR_RESERVED_SLOT 0x34 /*!< \brief Reserved slot violation */ #define HCI_ERR_ROLE_SWITCH 0x35 /*!< \brief Role switch failed */ #define HCI_ERR_INQ_TOO_LARGE 0x36 /*!< \brief Extended inquiry response too large */ #define HCI_ERR_UNSUP_SSP 0x37 /*!< \brief Secure simple pairing not supported by host */ #define HCI_ERR_HOST_BUSY_PAIRING 0x38 /*!< \brief Host busy - pairing */ #define HCI_ERR_NO_CHANNEL 0x39 /*!< \brief Connection rejected no suitable channel */ #define HCI_ERR_CONTROLLER_BUSY 0x3A /*!< \brief Controller busy */ #define HCI_ERR_CONN_INTERVAL 0x3B /*!< \brief Unacceptable connection interval */ #define HCI_ERR_ADV_TIMEOUT 0x3C /*!< \brief Advertising timeout */ #define HCI_ERR_MIC_FAILURE 0x3D /*!< \brief Connection terminated due to MIC failure */ #define HCI_ERR_CONN_FAIL 0x3E /*!< \brief Connection failed to be established */ #define HCI_ERR_MAC_CONN_FAIL 0x3F /*!< \brief MAC connection failed */ #define HCI_ERR_COARSE_CLK_ADJ_REJ 0x40 /*!< \brief Coarse clock adjustment rejected */ #define HCI_ERR_TYPE0_SUBMAP_NOT_DEF 0x41 /*!< \brief Type0 submap not defined */ #define HCI_ERR_UNKNOWN_ADV_ID 0x42 /*!< \brief Unknown advertising identifier */ #define HCI_ERR_LIMIT_REACHED 0x43 /*!< \brief Limit reached */ #define HCI_ERR_OP_CANCELLED_BY_HOST 0x44 /*!< \brief Operation cancelled by host */ /*! \brief New in version 5.1 */ #define HCI_ERR_PKT_TOO_LONG 0x45 /*!< \brief Packet too long */ /**@}*/ /** \name Command groups * */ /**@{*/ #define HCI_OGF_NOP 0x00 /*!< \brief No operation */ #define HCI_OGF_LINK_CONTROL 0x01 /*!< \brief Link control */ #define HCI_OGF_LINK_POLICY 0x02 /*!< \brief Link policy */ #define HCI_OGF_CONTROLLER 0x03 /*!< \brief Controller and baseband */ #define HCI_OGF_INFORMATIONAL 0x04 /*!< \brief Informational parameters */ #define HCI_OGF_STATUS 0x05 /*!< \brief Status parameters */ #define HCI_OGF_TESTING 0x06 /*!< \brief Testing */ #define HCI_OGF_LE_CONTROLLER 0x08 /*!< \brief LE controller */ #define HCI_OGF_VENDOR_SPEC 0x3F /*!< \brief Vendor specific */ /**@}*/ /** \name NOP command * */ /**@{*/ #define HCI_OCF_NOP 0x00 /**@}*/ /** \name Link control commands * */ /**@{*/ #define HCI_OCF_DISCONNECT 0x06 #define HCI_OCF_READ_REMOTE_VER_INFO 0x1D /**@}*/ /*! \brief Link policy commands (none used for LE) */ /** \name Controller and baseband commands * */ /**@{*/ #define HCI_OCF_SET_EVENT_MASK 0x01 #define HCI_OCF_RESET 0x03 #define HCI_OCF_READ_TX_PWR_LVL 0x2D #define HCI_OCF_SET_CONTROLLER_TO_HOST_FC 0x31 #define HCI_OCF_HOST_BUFFER_SIZE 0x33 #define HCI_OCF_HOST_NUM_CMPL_PKTS 0x35 #define HCI_OCF_SET_EVENT_MASK_PAGE2 0x63 #define HCI_OCF_READ_AUTH_PAYLOAD_TO 0x7B #define HCI_OCF_WRITE_AUTH_PAYLOAD_TO 0x7C /**@}*/ /** \name Informational commands * */ /**@{*/ #define HCI_OCF_READ_LOCAL_VER_INFO 0x01 #define HCI_OCF_READ_LOCAL_SUP_CMDS 0x02 #define HCI_OCF_READ_LOCAL_SUP_FEAT 0x03 #define HCI_OCF_READ_BUF_SIZE 0x05 #define HCI_OCF_READ_BD_ADDR 0x09 /**@}*/ /** \name Status commands * */ /**@{*/ #define HCI_OCF_READ_RSSI 0x05 /**@}*/ /** \name LE controller commands * */ /**@{*/ #define HCI_OCF_LE_SET_EVENT_MASK 0x01 #define HCI_OCF_LE_READ_BUF_SIZE 0x02 #define HCI_OCF_LE_READ_LOCAL_SUP_FEAT 0x03 #define HCI_OCF_LE_SET_RAND_ADDR 0x05 #define HCI_OCF_LE_SET_ADV_PARAM 0x06 #define HCI_OCF_LE_READ_ADV_TX_POWER 0x07 #define HCI_OCF_LE_SET_ADV_DATA 0x08 #define HCI_OCF_LE_SET_SCAN_RESP_DATA 0x09 #define HCI_OCF_LE_SET_ADV_ENABLE 0x0A #define HCI_OCF_LE_SET_SCAN_PARAM 0x0B #define HCI_OCF_LE_SET_SCAN_ENABLE 0x0C #define HCI_OCF_LE_CREATE_CONN 0x0D #define HCI_OCF_LE_CREATE_CONN_CANCEL 0x0E #define HCI_OCF_LE_READ_WHITE_LIST_SIZE 0x0F #define HCI_OCF_LE_CLEAR_WHITE_LIST 0x10 #define HCI_OCF_LE_ADD_DEV_WHITE_LIST 0x11 #define HCI_OCF_LE_REMOVE_DEV_WHITE_LIST 0x12 #define HCI_OCF_LE_CONN_UPDATE 0x13 #define HCI_OCF_LE_SET_HOST_CHAN_CLASS 0x14 #define HCI_OCF_LE_READ_CHAN_MAP 0x15 #define HCI_OCF_LE_READ_REMOTE_FEAT 0x16 #define HCI_OCF_LE_ENCRYPT 0x17 #define HCI_OCF_LE_RAND 0x18 #define HCI_OCF_LE_START_ENCRYPTION 0x19 #define HCI_OCF_LE_LTK_REQ_REPL 0x1A #define HCI_OCF_LE_LTK_REQ_NEG_REPL 0x1B #define HCI_OCF_LE_READ_SUP_STATES 0x1C #define HCI_OCF_LE_RECEIVER_TEST 0x1D #define HCI_OCF_LE_TRANSMITTER_TEST 0x1E #define HCI_OCF_LE_TEST_END 0x1F /*! \brief New in version 4.1 */ #define HCI_OCF_LE_REM_CONN_PARAM_REP 0x20 #define HCI_OCF_LE_REM_CONN_PARAM_NEG_REP 0x21 /*! \brief New in version 4.2 */ #define HCI_OCF_LE_SET_DATA_LEN 0x22 #define HCI_OCF_LE_READ_DEF_DATA_LEN 0x23 #define HCI_OCF_LE_WRITE_DEF_DATA_LEN 0x24 #define HCI_OCF_LE_READ_LOCAL_P256_PUB_KEY 0x25 #define HCI_OCF_LE_GENERATE_DHKEY 0x26 #define HCI_OCF_LE_ADD_DEV_RES_LIST 0x27 #define HCI_OCF_LE_REMOVE_DEV_RES_LIST 0x28 #define HCI_OCF_LE_CLEAR_RES_LIST 0x29 #define HCI_OCF_LE_READ_RES_LIST_SIZE 0x2A #define HCI_OCF_LE_READ_PEER_RES_ADDR 0x2B #define HCI_OCF_LE_READ_LOCAL_RES_ADDR 0x2C #define HCI_OCF_LE_SET_ADDR_RES_ENABLE 0x2D #define HCI_OCF_LE_SET_RES_PRIV_ADDR_TO 0x2E #define HCI_OCF_LE_READ_MAX_DATA_LEN 0x2F /*! \brief New in version 5.0 */ #define HCI_OCF_LE_READ_PHY 0x30 #define HCI_OCF_LE_SET_DEF_PHY 0x31 #define HCI_OCF_LE_SET_PHY 0x32 #define HCI_OCF_LE_ENHANCED_RECEIVER_TEST 0x33 #define HCI_OCF_LE_ENHANCED_TRANSMITTER_TEST 0x34 #define HCI_OCF_LE_SET_ADV_SET_RAND_ADDR 0x35 #define HCI_OCF_LE_SET_EXT_ADV_PARAM 0x36 #define HCI_OCF_LE_SET_EXT_ADV_DATA 0x37 #define HCI_OCF_LE_SET_EXT_SCAN_RESP_DATA 0x38 #define HCI_OCF_LE_SET_EXT_ADV_ENABLE 0x39 #define HCI_OCF_LE_READ_MAX_ADV_DATA_LEN 0x3A #define HCI_OCF_LE_READ_NUM_SUP_ADV_SETS 0x3B #define HCI_OCF_LE_REMOVE_ADV_SET 0x3C #define HCI_OCF_LE_CLEAR_ADV_SETS 0x3D #define HCI_OCF_LE_SET_PER_ADV_PARAM 0x3E #define HCI_OCF_LE_SET_PER_ADV_DATA 0x3F #define HCI_OCF_LE_SET_PER_ADV_ENABLE 0x40 #define HCI_OCF_LE_SET_EXT_SCAN_PARAM 0x41 #define HCI_OCF_LE_SET_EXT_SCAN_ENABLE 0x42 #define HCI_OCF_LE_EXT_CREATE_CONN 0x43 #define HCI_OCF_LE_PER_ADV_CREATE_SYNC 0x44 #define HCI_OCF_LE_PER_ADV_CREATE_SYNC_CANCEL 0x45 #define HCI_OCF_LE_PER_ADV_TERM_SYNC 0x46 #define HCI_OCF_LE_ADD_DEV_PER_ADV_LIST 0x47 #define HCI_OCF_LE_REMOVE_DEV_PER_ADV_LIST 0x48 #define HCI_OCF_LE_CLEAR_PER_ADV_LIST 0x49 #define HCI_OCF_LE_READ_PER_ADV_LIST_SIZE 0x4A #define HCI_OCF_LE_READ_TX_POWER 0x4B #define HCI_OCF_LE_READ_RF_PATH_COMP 0x4C #define HCI_OCF_LE_WRITE_RF_PATH_COMP 0x4D #define HCI_OCF_LE_SET_PRIVACY_MODE 0x4E /*! \brief New in version 5.1 */ #define HCI_OCF_LE_RECEIVER_TEST_V3 0x4F #define HCI_OCF_LE_TRANSMITTER_TEST_V3 0x50 #define HCI_OCF_LE_SET_CONNLESS_CTE_TX_PARAMS 0x51 #define HCI_OCF_LE_SET_CONNLESS_CTE_TX_ENABLE 0x52 #define HCI_OCF_LE_SET_CONNLESS_IQ_SAMP_ENABLE 0x53 #define HCI_OCF_LE_SET_CONN_CTE_RX_PARAMS 0x54 #define HCI_OCF_LE_SET_CONN_CTE_TX_PARAMS 0x55 #define HCI_OCF_LE_CONN_CTE_REQ_ENABLE 0x56 #define HCI_OCF_LE_CONN_CTE_RSP_ENABLE 0x57 #define HCI_OCF_LE_READ_ANTENNA_INFO 0x58 #define HCI_OCF_LE_SET_PER_ADV_RCV_ENABLE 0x59 #define HCI_OCF_LE_PER_ADV_SYNC_TRANSFER 0x5A #define HCI_OCF_LE_PER_ADV_SET_INFO_TRANSFER 0x5B #define HCI_OCF_LE_SET_PAST_PARAM 0x5C #define HCI_OCF_LE_SET_DEFAULT_PAST_PARAM 0x5D #define HCI_OCF_LE_GENERATE_DHKEY_V2 0x5E #define HCI_OCF_LE_MODIFY_SLEEP_CLK_ACC 0x5F /*! \brief New in version Milan */ #define HCI_OCF_LE_READ_ISO_BUFFER_SIZE 0x60 #define HCI_OCF_LE_READ_ISO_TX_SYNC 0x61 #define HCI_OCF_LE_SET_CIG_PARAMS 0x62 #define HCI_OCF_LE_SET_CIG_PARAMS_TEST 0x63 #define HCI_OCF_LE_CREATE_CIS 0x64 #define HCI_OCF_LE_REMOVE_CIG 0x65 #define HCI_OCF_LE_ACCEPT_CIS_REQ 0x66 #define HCI_OCF_LE_REJECT_CIS_REQ 0x67 #define HCI_OCF_LE_CREATE_BIG 0x68 #define HCI_OCF_LE_CREATE_BIG_TEST 0x69 #define HCI_OCF_LE_BIG_CREATE_SYNC 0x6A #define HCI_OCF_LE_TERMINATE_BIG 0x6B #define HCI_OCF_LE_BIG_TERMINATE_SYNC 0x6C #define HCI_OCF_LE_REQUEST_PEER_SCA 0x6D #define HCI_OCF_LE_SETUP_ISO_DATA_PATH 0x6E #define HCI_OCF_LE_REMOVE_ISO_DATA_PATH 0x6F #define HCI_OCF_LE_ISO_TX_TEST 0x70 #define HCI_OCF_LE_ISO_RX_TEST 0x71 #define HCI_OCF_LE_ISO_READ_TEST_COUNTER 0x72 #define HCI_OCF_LE_ISO_TERMINATE_TEST 0x73 /**@}*/ /** \name Opcode manipulation macros * */ /**@{*/ #define HCI_OPCODE(ogf, ocf) (((ogf) << 10) + (ocf)) #define HCI_OGF(opcode) ((opcode) >> 10) #define HCI_OCF(opcode) ((opcode) & 0x03FF) /**@}*/ /** \name Command opcodes * */ /**@{*/ #define HCI_OPCODE_NOP HCI_OPCODE(HCI_OGF_NOP, HCI_OCF_NOP) #define HCI_OPCODE_DISCONNECT HCI_OPCODE(HCI_OGF_LINK_CONTROL, HCI_OCF_DISCONNECT) #define HCI_OPCODE_READ_REMOTE_VER_INFO HCI_OPCODE(HCI_OGF_LINK_CONTROL, HCI_OCF_READ_REMOTE_VER_INFO) #define HCI_OPCODE_SET_EVENT_MASK HCI_OPCODE(HCI_OGF_CONTROLLER, HCI_OCF_SET_EVENT_MASK) #define HCI_OPCODE_RESET HCI_OPCODE(HCI_OGF_CONTROLLER, HCI_OCF_RESET) #define HCI_OPCODE_READ_TX_PWR_LVL HCI_OPCODE(HCI_OGF_CONTROLLER, HCI_OCF_READ_TX_PWR_LVL) #define HCI_OPCODE_SET_EVENT_MASK_PAGE2 HCI_OPCODE(HCI_OGF_CONTROLLER, HCI_OCF_SET_EVENT_MASK_PAGE2) #define HCI_OPCODE_READ_AUTH_PAYLOAD_TO HCI_OPCODE(HCI_OGF_CONTROLLER, HCI_OCF_READ_AUTH_PAYLOAD_TO) #define HCI_OPCODE_WRITE_AUTH_PAYLOAD_TO HCI_OPCODE(HCI_OGF_CONTROLLER, HCI_OCF_WRITE_AUTH_PAYLOAD_TO) #define HCI_OPCODE_READ_LOCAL_VER_INFO HCI_OPCODE(HCI_OGF_INFORMATIONAL, HCI_OCF_READ_LOCAL_VER_INFO) #define HCI_OPCODE_READ_LOCAL_SUP_CMDS HCI_OPCODE(HCI_OGF_INFORMATIONAL, HCI_OCF_READ_LOCAL_SUP_CMDS) #define HCI_OPCODE_READ_LOCAL_SUP_FEAT HCI_OPCODE(HCI_OGF_INFORMATIONAL, HCI_OCF_READ_LOCAL_SUP_FEAT) #define HCI_OPCODE_READ_BUF_SIZE HCI_OPCODE(HCI_OGF_INFORMATIONAL, HCI_OCF_READ_BUF_SIZE) #define HCI_OPCODE_READ_BD_ADDR HCI_OPCODE(HCI_OGF_INFORMATIONAL, HCI_OCF_READ_BD_ADDR) #define HCI_OPCODE_READ_RSSI HCI_OPCODE(HCI_OGF_STATUS, HCI_OCF_READ_RSSI) #define HCI_OPCODE_LE_SET_EVENT_MASK HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_EVENT_MASK) #define HCI_OPCODE_LE_READ_BUF_SIZE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_BUF_SIZE) #define HCI_OPCODE_LE_READ_LOCAL_SUP_FEAT HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_LOCAL_SUP_FEAT) #define HCI_OPCODE_LE_SET_RAND_ADDR HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_RAND_ADDR) #define HCI_OPCODE_LE_SET_ADV_PARAM HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_ADV_PARAM) #define HCI_OPCODE_LE_READ_ADV_TX_POWER HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_ADV_TX_POWER) #define HCI_OPCODE_LE_SET_ADV_DATA HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_ADV_DATA) #define HCI_OPCODE_LE_SET_SCAN_RESP_DATA HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_SCAN_RESP_DATA) #define HCI_OPCODE_LE_SET_ADV_ENABLE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_ADV_ENABLE) #define HCI_OPCODE_LE_SET_SCAN_PARAM HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_SCAN_PARAM) #define HCI_OPCODE_LE_SET_SCAN_ENABLE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_SCAN_ENABLE) #define HCI_OPCODE_LE_CREATE_CONN HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_CREATE_CONN) #define HCI_OPCODE_LE_CREATE_CONN_CANCEL HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_CREATE_CONN_CANCEL) #define HCI_OPCODE_LE_READ_WHITE_LIST_SIZE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_WHITE_LIST_SIZE) #define HCI_OPCODE_LE_CLEAR_WHITE_LIST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_CLEAR_WHITE_LIST) #define HCI_OPCODE_LE_ADD_DEV_WHITE_LIST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_ADD_DEV_WHITE_LIST) #define HCI_OPCODE_LE_REMOVE_DEV_WHITE_LIST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_REMOVE_DEV_WHITE_LIST) #define HCI_OPCODE_LE_CONN_UPDATE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_CONN_UPDATE) #define HCI_OPCODE_LE_SET_HOST_CHAN_CLASS HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_HOST_CHAN_CLASS) #define HCI_OPCODE_LE_READ_CHAN_MAP HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_CHAN_MAP) #define HCI_OPCODE_LE_READ_REMOTE_FEAT HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_REMOTE_FEAT) #define HCI_OPCODE_LE_ENCRYPT HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_ENCRYPT) #define HCI_OPCODE_LE_RAND HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_RAND) #define HCI_OPCODE_LE_START_ENCRYPTION HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_START_ENCRYPTION) #define HCI_OPCODE_LE_LTK_REQ_REPL HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_LTK_REQ_REPL) #define HCI_OPCODE_LE_LTK_REQ_NEG_REPL HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_LTK_REQ_NEG_REPL) #define HCI_OPCODE_LE_READ_SUP_STATES HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_SUP_STATES) #define HCI_OPCODE_LE_RECEIVER_TEST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_RECEIVER_TEST) #define HCI_OPCODE_LE_TRANSMITTER_TEST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_TRANSMITTER_TEST) #define HCI_OPCODE_LE_TEST_END HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_TEST_END) /*! \brief New in version 4.1 */ #define HCI_OPCODE_LE_REM_CONN_PARAM_REP HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_REM_CONN_PARAM_REP) #define HCI_OPCODE_LE_REM_CONN_PARAM_NEG_REP HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_REM_CONN_PARAM_NEG_REP) /*! \brief New in version 4.2 */ #define HCI_OPCODE_LE_SET_DATA_LEN HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_DATA_LEN) #define HCI_OPCODE_LE_READ_DEF_DATA_LEN HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_DEF_DATA_LEN) #define HCI_OPCODE_LE_WRITE_DEF_DATA_LEN HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_WRITE_DEF_DATA_LEN) #define HCI_OPCODE_LE_READ_LOCAL_P256_PUB_KEY HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_LOCAL_P256_PUB_KEY) #define HCI_OPCODE_LE_GENERATE_DHKEY HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_GENERATE_DHKEY) #define HCI_OPCODE_LE_ADD_DEV_RES_LIST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_ADD_DEV_RES_LIST) #define HCI_OPCODE_LE_REMOVE_DEV_RES_LIST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_REMOVE_DEV_RES_LIST) #define HCI_OPCODE_LE_CLEAR_RES_LIST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_CLEAR_RES_LIST) #define HCI_OPCODE_LE_READ_RES_LIST_SIZE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_RES_LIST_SIZE) #define HCI_OPCODE_LE_READ_PEER_RES_ADDR HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_PEER_RES_ADDR) #define HCI_OPCODE_LE_READ_LOCAL_RES_ADDR HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_LOCAL_RES_ADDR) #define HCI_OPCODE_LE_SET_ADDR_RES_ENABLE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_ADDR_RES_ENABLE) #define HCI_OPCODE_LE_SET_RES_PRIV_ADDR_TO HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_RES_PRIV_ADDR_TO) #define HCI_OPCODE_LE_READ_MAX_DATA_LEN HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_MAX_DATA_LEN) /*! \brief New in version 5.0 */ #define HCI_OPCODE_LE_READ_PHY HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_PHY) #define HCI_OPCODE_LE_SET_DEF_PHY HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_DEF_PHY) #define HCI_OPCODE_LE_SET_PHY HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_PHY) #define HCI_OPCODE_LE_ENHANCED_RECEIVER_TEST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_ENHANCED_RECEIVER_TEST) #define HCI_OPCODE_LE_ENHANCED_TRANSMITTER_TEST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_ENHANCED_TRANSMITTER_TEST) #define HCI_OPCODE_LE_SET_ADV_SET_RAND_ADDR HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_ADV_SET_RAND_ADDR) #define HCI_OPCODE_LE_SET_EXT_ADV_PARAM HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_EXT_ADV_PARAM) #define HCI_OPCODE_LE_SET_EXT_ADV_DATA HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_EXT_ADV_DATA) #define HCI_OPCODE_LE_SET_EXT_SCAN_RESP_DATA HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_EXT_SCAN_RESP_DATA) #define HCI_OPCODE_LE_SET_EXT_ADV_ENABLE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_EXT_ADV_ENABLE) #define HCI_OPCODE_LE_READ_MAX_ADV_DATA_LEN HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_MAX_ADV_DATA_LEN) #define HCI_OPCODE_LE_READ_NUM_SUP_ADV_SETS HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_NUM_SUP_ADV_SETS) #define HCI_OPCODE_LE_REMOVE_ADV_SET HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_REMOVE_ADV_SET) #define HCI_OPCODE_LE_CLEAR_ADV_SETS HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_CLEAR_ADV_SETS) #define HCI_OPCODE_LE_SET_PER_ADV_PARAM HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_PER_ADV_PARAM) #define HCI_OPCODE_LE_SET_PER_ADV_DATA HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_PER_ADV_DATA) #define HCI_OPCODE_LE_SET_PER_ADV_ENABLE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_PER_ADV_ENABLE) #define HCI_OPCODE_LE_SET_EXT_SCAN_PARAM HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_EXT_SCAN_PARAM) #define HCI_OPCODE_LE_SET_EXT_SCAN_ENABLE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_EXT_SCAN_ENABLE) #define HCI_OPCODE_LE_EXT_CREATE_CONN HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_EXT_CREATE_CONN) #define HCI_OPCODE_LE_PER_ADV_CREATE_SYNC HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_PER_ADV_CREATE_SYNC) #define HCI_OPCODE_LE_PER_ADV_CREATE_SYNC_CANCEL HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_PER_ADV_CREATE_SYNC_CANCEL) #define HCI_OPCODE_LE_PER_ADV_TERMINATE_SYNC HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_PER_ADV_TERM_SYNC) #define HCI_OPCODE_LE_ADD_DEV_PER_ADV_LIST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_ADD_DEV_PER_ADV_LIST) #define HCI_OPCODE_LE_REMOVE_DEV_PER_ADV_LIST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_REMOVE_DEV_PER_ADV_LIST) #define HCI_OPCODE_LE_CLEAR_PER_ADV_LIST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_CLEAR_PER_ADV_LIST) #define HCI_OPCODE_LE_READ_PER_ADV_LIST_SIZE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_PER_ADV_LIST_SIZE) #define HCI_OPCODE_LE_READ_TX_POWER HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_TX_POWER) #define HCI_OPCODE_LE_WRITE_RF_PATH_COMP HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_WRITE_RF_PATH_COMP) #define HCI_OPCODE_LE_READ_RF_PATH_COMP HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_RF_PATH_COMP) #define HCI_OPCODE_LE_SET_PRIVACY_MODE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_PRIVACY_MODE) /*! \brief New in version 5.1 */ #define HCI_OPCODE_LE_RECEIVER_TEST_V3 HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_RECEIVER_TEST_V3) #define HCI_OPCODE_LE_TRANSMITTER_TEST_V3 HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_TRANSMITTER_TEST_V3) #define HCI_OPCODE_LE_SET_CONNLESS_CTE_TX_PARAMS HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_CONNLESS_CTE_TX_PARAMS) #define HCI_OPCODE_LE_SET_CONNLESS_CTE_TX_ENABLE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_CONNLESS_CTE_TX_ENABLE) #define HCI_OPCODE_LE_SET_CONNLESS_IQ_SAMP_ENABLE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_CONNLESS_IQ_SAMP_ENABLE) #define HCI_OPCODE_LE_SET_CONN_CTE_RX_PARAMS HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_CONN_CTE_RX_PARAMS) #define HCI_OPCODE_LE_SET_CONN_CTE_TX_PARAMS HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_CONN_CTE_TX_PARAMS) #define HCI_OPCODE_LE_CONN_CTE_REQ_ENABLE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_CONN_CTE_REQ_ENABLE) #define HCI_OPCODE_LE_CONN_CTE_RSP_ENABLE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_CONN_CTE_RSP_ENABLE) #define HCI_OPCODE_LE_READ_ANTENNA_INFO HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_ANTENNA_INFO) #define HCI_OPCODE_LE_SET_PER_ADV_RCV_ENABLE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_PER_ADV_RCV_ENABLE) #define HCI_OPCODE_LE_PER_ADV_SYNC_TRANSFER HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_PER_ADV_SYNC_TRANSFER) #define HCI_OPCODE_LE_PER_ADV_SET_INFO_TRANSFER HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_PER_ADV_SET_INFO_TRANSFER) #define HCI_OPCODE_LE_SET_PAST_PARAM HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_PAST_PARAM) #define HCI_OPCODE_LE_SET_DEFAULT_PAST_PARAM HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_DEFAULT_PAST_PARAM) #define HCI_OPCODE_LE_GENERATE_DHKEY_V2 HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_GENERATE_DHKEY_V2) #define HCI_OPCODE_LE_MODIFY_SLEEP_CLK_ACC HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_MODIFY_SLEEP_CLK_ACC) /*! \brief New in version Milan */ #define HCI_OPCODE_LE_READ_ISO_BUFFER_SIZE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_ISO_BUFFER_SIZE) #define HCI_OPCODE_LE_READ_ISO_TX_SYNC HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_ISO_TX_SYNC) #define HCI_OPCODE_LE_SET_CIG_PARAMS HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_CIG_PARAMS) #define HCI_OPCODE_LE_SET_CIG_PARAMS_TEST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_CIG_PARAMS_TEST) #define HCI_OPCODE_LE_CREATE_CIS HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_CREATE_CIS) #define HCI_OPCODE_LE_REMOVE_CIG HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_REMOVE_CIG) #define HCI_OPCODE_LE_ACCEPT_CIS_REQ HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_ACCEPT_CIS_REQ) #define HCI_OPCODE_LE_REJECT_CIS_REQ HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_REJECT_CIS_REQ) #define HCI_OPCODE_LE_CREATE_BIG HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_CREATE_BIG) #define HCI_OPCODE_LE_CREATE_BIG_TEST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_CREATE_BIG_TEST) #define HCI_OPCODE_LE_BIG_CREATE_SYNC HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_BIG_CREATE_SYNC) #define HCI_OPCODE_LE_TERMINATE_BIG HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_TERMINATE_BIG) #define HCI_OPCODE_LE_BIG_TERMINATE_SYNC HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_BIG_TERMINATE_SYNC) #define HCI_OPCODE_LE_REQUEST_PEER_SCA HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_REQUEST_PEER_SCA) #define HCI_OPCODE_LE_SETUP_ISO_DATA_PATH HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SETUP_ISO_DATA_PATH) #define HCI_OPCODE_LE_REMOVE_ISO_DATA_PATH HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_REMOVE_ISO_DATA_PATH) #define HCI_OPCODE_LE_ISO_TX_TEST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_ISO_TX_TEST) #define HCI_OPCODE_LE_ISO_RX_TEST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_ISO_RX_TEST) #define HCI_OPCODE_LE_ISO_READ_TEST_COUNTER HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_ISO_READ_TEST_COUNTER) #define HCI_OPCODE_LE_ISO_TERMINATE_TEST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_ISO_TERMINATE_TEST) /**@}*/ /** \name ARM Vendor Specific * */ /**@{*/ #define HCI_OPCODE_LE_VS_ENABLE_READ_FEAT_ON_CONN ((uint16_t)(0xfff3)) /**@}*/ /** \name Command parameter lengths * */ /**@{*/ #define HCI_LEN_NOP 0 #define HCI_LEN_DISCONNECT 3 #define HCI_LEN_READ_REMOTE_VER_INFO 2 #define HCI_LEN_SET_EVENT_MASK 8 #define HCI_LEN_SET_EVENT_MASK_PAGE2 8 #define HCI_LEN_RESET 0 #define HCI_LEN_READ_TX_PWR_LVL 3 #define HCI_LEN_SET_CONTROLLER_TO_HOST_FC 1 #define HCI_LEN_HOST_BUFFER_SIZE 8 #define HCI_LEN_HOST_NUM_CMPL_PKTS 1 #define HCI_LEN_READ_LOCAL_VER_INFO 0 #define HCI_LEN_READ_LOCAL_SUP_CMDS 0 #define HCI_LEN_READ_LOCAL_SUP_FEAT 0 #define HCI_LEN_READ_BUF_SIZE 0 #define HCI_LEN_READ_BD_ADDR 0 #define HCI_LEN_READ_RSSI 2 #define HCI_LEN_READ_AUTH_PAYLOAD_TO 2 #define HCI_LEN_WRITE_AUTH_PAYLOAD_TO 4 #define HCI_LEN_LE_SET_EVENT_MASK 8 #define HCI_LEN_LE_READ_BUF_SIZE 0 #define HCI_LEN_LE_READ_LOCAL_SUP_FEAT 0 #define HCI_LEN_LE_SET_RAND_ADDR 6 #define HCI_LEN_LE_SET_ADV_PARAM 15 #define HCI_LEN_LE_READ_ADV_TX_POWER 0 #define HCI_LEN_LE_SET_ADV_DATA 32 #define HCI_LEN_LE_SET_SCAN_RESP_DATA 32 #define HCI_LEN_LE_SET_ADV_ENABLE 1 #define HCI_LEN_LE_SET_SCAN_PARAM 7 #define HCI_LEN_LE_SET_SCAN_ENABLE 2 #define HCI_LEN_LE_CREATE_CONN 25 #define HCI_LEN_LE_CREATE_CONN_CANCEL 0 #define HCI_LEN_LE_READ_WHITE_LIST_SIZE 0 #define HCI_LEN_LE_CLEAR_WHITE_LIST 0 #define HCI_LEN_LE_ADD_DEV_WHITE_LIST 7 #define HCI_LEN_LE_REMOVE_DEV_WHITE_LIST 7 #define HCI_LEN_LE_CONN_UPDATE 14 #define HCI_LEN_LE_SET_HOST_CHAN_CLASS 5 #define HCI_LEN_LE_READ_CHAN_MAP 2 #define HCI_LEN_LE_READ_REMOTE_FEAT 2 #define HCI_LEN_LE_ENCRYPT 32 #define HCI_LEN_LE_RAND 0 #define HCI_LEN_LE_START_ENCRYPTION 28 #define HCI_LEN_LE_LTK_REQ_REPL 18 #define HCI_LEN_LE_LTK_REQ_NEG_REPL 2 #define HCI_LEN_LE_READ_SUP_STATES 0 #define HCI_LEN_LE_RECEIVER_TEST 1 #define HCI_LEN_LE_TRANSMITTER_TEST 3 #define HCI_LEN_LE_TEST_END 0 /*! \brief New in version 4.1 */ #define HCI_LEN_LE_REM_CONN_PARAM_REP 14 #define HCI_LEN_LE_REM_CONN_PARAM_NEG_REP 3 /*! \brief New in version 4.2 */ #define HCI_LEN_LE_SET_DATA_LEN 6 #define HCI_LEN_LE_READ_DEF_DATA_LEN 0 #define HCI_LEN_LE_WRITE_DEF_DATA_LEN 4 #define HCI_LEN_LE_READ_LOCAL_P256_PUB_KEY 0 #define HCI_LEN_LE_GENERATE_DHKEY 64 #define HCI_LEN_LE_ADD_DEV_RES_LIST 39 #define HCI_LEN_LE_REMOVE_DEV_RES_LIST 7 #define HCI_LEN_LE_CLEAR_RES_LIST 0 #define HCI_LEN_LE_READ_RES_LIST_SIZE 0 #define HCI_LEN_LE_READ_PEER_RES_ADDR 7 #define HCI_LEN_LE_READ_LOCAL_RES_ADDR 7 #define HCI_LEN_LE_SET_ADDR_RES_ENABLE 1 #define HCI_LEN_LE_SET_RES_PRIV_ADDR_TO 2 #define HCI_LEN_LE_READ_MAX_DATA_LEN 0 /*! \brief New in version 5.0 */ #define HCI_LEN_LE_READ_PHY 2 #define HCI_LEN_LE_SET_DEF_PHY 3 #define HCI_LEN_LE_SET_PHY 7 #define HCI_LEN_LE_ENHANCED_RECEIVER_TEST 3 #define HCI_LEN_LE_ENHANCED_TRANSMITTER_TEST 4 #define HCI_LEN_LE_SET_ADV_SET_RAND_ADDR 7 #define HCI_LEN_LE_SET_EXT_ADV_PARAM 25 #define HCI_LEN_LE_SET_EXT_ADV_DATA(len) (4 + (len)) #define HCI_LEN_LE_SET_EXT_SCAN_RESP_DATA(len) (4 + (len)) #define HCI_LEN_LE_EXT_ADV_ENABLE(numSets) (2 + (4 * (numSets))) #define HCI_LEN_LE_READ_MAX_ADV_DATA_LEN 0 #define HCI_LEN_LE_READ_NUM_OF_SUP_ADV_SETS 0 #define HCI_LEN_LE_REMOVE_ADV_SET 1 #define HCI_LEN_LE_CLEAR_ADV_SETS 0 #define HCI_LEN_LE_SET_PER_ADV_PARAM 7 #define HCI_LEN_LE_SET_PER_ADV_DATA(len) (3 + (len)) #define HCI_LEN_LE_SET_PER_ADV_ENABLE 2 #define HCI_LEN_LE_SET_EXT_SCAN_PARAM(numPhys) (3 + (5 * (numPhys))) #define HCI_LEN_LE_SET_EXT_SCAN_ENABLE 6 #define HCI_LEN_LE_EXT_CREATE_CONN(numPhys) (10 + (16 * (numPhys))) #define HCI_LEN_LE_PER_ADV_CREATE_SYNC 14 #define HCI_LEN_LE_PER_ADV_CREATE_SYNC_CANCEL 0 #define HCI_LEN_LE_PER_ADV_TERMINATE_SYNC 2 #define HCI_LEN_LE_ADD_DEV_PER_ADV_LIST 8 #define HCI_LEN_LE_REMOVE_DEV_PER_ADV_LIST 8 #define HCI_LEN_LE_CLEAR_PER_ADV_LIST 0 #define HCI_LEN_LE_READ_PER_ADV_LIST_SIZE 0 #define HCI_LEN_LE_READ_TX_POWER 0 #define HCI_LEN_LE_READ_RF_PATH_COMP 0 #define HCI_LEN_LE_WRITE_RF_PATH_COMP 4 #define HCI_LEN_LE_SET_PRIVACY_MODE 8 /*! \brief New in version 5.1 */ #define HCI_LEN_LE_SET_CONN_CTE_RX_PARAMS(spLen) (5 + (spLen)) #define HCI_LEN_LE_SET_CONN_CTE_TX_PARAMS(spLen) (4 + (spLen)) #define HCI_LEN_LE_CONN_CTE_REQ_ENABLE 7 #define HCI_LEN_LE_CONN_CTE_RSP_ENABLE 3 #define HCI_LEN_LE_READ_ANTENNA_INFO 0 #define HCI_LEN_LE_SET_PER_ADV_RCV_ENABLE 3 #define HCI_LEN_LE_PER_ADV_SYNC_TRANSFER 6 #define HCI_LEN_LE_PER_ADV_SET_INFO_TRANSFER 5 #define HCI_LEN_LE_SET_PAST_PARAM 8 #define HCI_LEN_LE_SET_DEFAULT_PAST_PARAM 6 #define HCI_LEN_LE_GENERATE_DHKEY_V2 65 /**@}*/ /** \name Events * */ /**@{*/ #define HCI_DISCONNECT_CMPL_EVT 0x05 #define HCI_ENC_CHANGE_EVT 0x08 #define HCI_READ_REMOTE_VER_INFO_CMPL_EVT 0x0C #define HCI_CMD_CMPL_EVT 0x0E #define HCI_CMD_STATUS_EVT 0x0F #define HCI_HW_ERROR_EVT 0x10 #define HCI_NUM_CMPL_PKTS_EVT 0x13 #define HCI_DATA_BUF_OVERFLOW_EVT 0x1A #define HCI_ENC_KEY_REFRESH_CMPL_EVT 0x30 #define HCI_LE_META_EVT 0x3E #define HCI_AUTH_PAYLOAD_TIMEOUT_EVT 0x57 #define HCI_VENDOR_SPEC_EVT 0xFF /**@}*/ /** \name LE Subevents * */ /**@{*/ #define HCI_LE_CONN_CMPL_EVT 0x01 #define HCI_LE_ADV_REPORT_EVT 0x02 #define HCI_LE_CONN_UPDATE_CMPL_EVT 0x03 #define HCI_LE_READ_REMOTE_FEAT_CMPL_EVT 0x04 #define HCI_LE_LTK_REQ_EVT 0x05 /*! \brief New in version 4.1 */ #define HCI_LE_REM_CONN_PARAM_REQ_EVT 0x06 /*! \brief New in version 4.2 */ #define HCI_LE_DATA_LEN_CHANGE_EVT 0x07 #define HCI_LE_READ_LOCAL_P256_PUB_KEY_CMPL_EVT 0x08 #define HCI_LE_GENERATE_DHKEY_CMPL_EVT 0x09 #define HCI_LE_ENHANCED_CONN_CMPL_EVT 0x0A #define HCI_LE_DIRECT_ADV_REPORT_EVT 0x0B /*! \brief New in version 5.0 */ #define HCI_LE_PHY_UPDATE_CMPL_EVT 0x0C #define HCI_LE_EXT_ADV_REPORT_EVT 0x0D #define HCI_LE_PER_ADV_SYNC_EST_EVT 0x0E #define HCI_LE_PER_ADV_REPORT_EVT 0x0F #define HCI_LE_PER_ADV_SYNC_LOST_EVT 0x10 #define HCI_LE_SCAN_TIMEOUT_EVT 0x11 #define HCI_LE_ADV_SET_TERM_EVT 0x12 #define HCI_LE_SCAN_REQ_RCVD_EVT 0x13 #define HCI_LE_CH_SEL_ALGO_EVT 0x14 /*! \brief New in version 5.1 */ #define HCI_LE_CONNLESS_IQ_REPORT_EVT 0x15 #define HCI_LE_CONN_IQ_REPORT_EVT 0x16 #define HCI_LE_CTE_REQ_FAILED_EVT 0x17 #define HCI_LE_PER_SYNC_TRSF_RCVD_EVT 0x18 /*! \brief New in version Milan */ #define HCI_LE_CIS_EST_EVT 0x19 #define HCI_LE_CIS_REQ_EVT 0x1A #define HCI_LE_BIG_CMPL_EVT 0x1B #define HCI_LE_BIG_SYNC_LOST_EVT 0x1C #define HCI_LE_REQ_PEER_SCA_CMPLT_EVT 0x1D /**@}*/ /** \name Event parameter lengths * */ /**@{*/ #define HCI_LEN_DISCONNECT_CMPL 4 /*!< \brief Disconnect event length. */ #define HCI_LEN_READ_REMOTE_VER_INFO_CMPL 8 /*!< \brief Read remove version info complete event length. */ #define HCI_LEN_CMD_CMPL 3 /*!< \brief Command complete event length. */ #define HCI_LEN_CMD_STATUS 4 /*!< \brief Command status event length. */ #define HCI_LEN_HW_ERR 1 /*!< \brief Hardware error event length. */ #define HCI_LEN_NUM_CMPL_PKTS 5 /*!< \brief Number of completed packets event length. */ #define HCI_LEN_ENC_CHANGE 4 /*!< \brief Encryption change event length. */ #define HCI_LEN_ENC_KEY_REFRESH_CMPL 3 /*!< \brief Encryption key refresh complete event length. */ #define HCI_LEN_LE_CONN_CMPL 19 /*!< \brief Connection complete event length. */ #define HCI_LEN_LE_ADV_RPT_MIN 12 /*!< \brief Advertising report event minimum length. */ #define HCI_LEN_LE_CONN_UPDATE_CMPL 10 /*!< \brief Connection update complete event length. */ #define HCI_LEN_LE_READ_REMOTE_FEAT_CMPL 12 /*!< \brief Read remote feature event length. */ #define HCI_LEN_LE_LTK_REQ 13 /*!< \brief LTK request event length. */ /*! \brief New in version 4.1 */ #define HCI_LEN_LE_REM_CONN_PARAM_REQ 11 /*!< \brief Remote connection parameter event length. */ #define HCI_LEN_LE_DATA_LEN_CHANGE 11 /*!< \brief Data length change event length. */ #define HCI_LEN_LE_READ_PUB_KEY_CMPL 66 /*!< \brief Read local P256 public key compete event length. */ #define HCI_LEN_LE_GEN_DHKEY_CMPL 34 /*!< \brief Generate DH key complete event length. */ #define HCI_LEN_LE_ENHANCED_CONN_CMPL 31 /*!< \brief Enhanced connection complete event length. */ #define HCI_LEN_LE_DIRECT_ADV_REPORT 18 /*!< \brief Direct advertising report event length. */ #define HCI_LEN_AUTH_PAYLOAD_TIMEOUT 2 /*!< \brief Authenticated payload timeout event length. */ /*! \brief New in version 5.0 */ #define HCI_LEN_LE_PHY_UPDATE_CMPL 6 /*!< \brief PHY update complete event length. */ #define HCI_LEN_LE_CH_SEL_ALGO 4 /*!< \brief Channel selection algorithm event length. */ #define HCI_LEN_LE_PHY_UPDATE_CMPL 6 /*!< \brief PHY update complete event length. */ #define HCI_LEN_LE_EXT_ADV_REPORT_MIN 26 /*!< \brief Extended advertising report minimum length. */ #define HCI_LEN_LE_PER_ADV_SYNC_EST 16 /*!< \brief Periodic advertising sync established event length. */ #define HCI_LEN_LE_PER_ADV_REPORT 8 /*!< \brief Periodic advertising report event length. */ #define HCI_LEN_LE_PER_ADV_SYNC_LOST 3 /*!< \brief Periodic advertising sync lost event length. */ #define HCI_LEN_LE_SCAN_TIMEOUT 1 /*!< \brief Scan timeout event length. */ #define HCI_LEN_LE_ADV_SET_TERM 6 /*!< \brief Advertising set terminated event length. */ #define HCI_LEN_LE_SCAN_REQ_RCVD 9 /*!< \brief Scan request received event length. */ /*! \brief New in version 5.1 */ #define HCI_LEN_LE_PER_SYNC_TRSF_RCVT 20 /*!< \brief Periodic advertising sync transfer received event length. */ /*! \brief New in version Milan */ #define HCI_LEN_LE_CIS_EST 12 /*!< \brief CIS established event length. */ #define HCI_LEN_LE_CIS_REQ 7 /*!< \brief CIS request event length. */ #define HCI_LEN_LE_PEER_SCA_CMPL 5 /*!< \brief Request peer SCA complete event length. */ /**@}*/ /** \name Supported commands * */ /**@{*/ #define HCI_SUP_DISCONNECT 0x20 /*!< \brief Byte 0 */ #define HCI_SUP_READ_REMOTE_VER_INFO 0x80 /*!< \brief Byte 2 */ #define HCI_SUP_SET_EVENT_MASK 0x40 /*!< \brief Byte 5 */ #define HCI_SUP_RESET 0x80 /*!< \brief Byte 5 */ #define HCI_SUP_READ_TX_PWR_LVL 0x04 /*!< \brief Byte 10 */ #define HCI_SUP_READ_LOCAL_VER_INFO 0x08 /*!< \brief Byte 14 */ #define HCI_SUP_READ_LOCAL_SUP_FEAT 0x20 /*!< \brief Byte 14 */ #define HCI_SUP_READ_BD_ADDR 0x02 /*!< \brief Byte 15 */ #define HCI_SUP_READ_RSSI 0x20 /*!< \brief Byte 15 */ #define HCI_SUP_SET_EVENT_MASK_PAGE2 0x04 /*!< \brief Byte 22 */ #define HCI_SUP_LE_SET_EVENT_MASK 0x01 /*!< \brief Byte 25 */ #define HCI_SUP_LE_READ_BUF_SIZE 0x02 /*!< \brief Byte 25 */ #define HCI_SUP_LE_READ_LOCAL_SUP_FEAT 0x04 /*!< \brief Byte 25 */ #define HCI_SUP_LE_SET_RAND_ADDR 0x10 /*!< \brief Byte 25 */ #define HCI_SUP_LE_SET_ADV_PARAM 0x20 /*!< \brief Byte 25 */ #define HCI_SUP_LE_READ_ADV_TX_POWER 0x40 /*!< \brief Byte 25 */ #define HCI_SUP_LE_SET_ADV_DATA 0x80 /*!< \brief Byte 25 */ #define HCI_SUP_LE_SET_SCAN_RESP_DATA 0x01 /*!< \brief Byte 26 */ #define HCI_SUP_LE_SET_ADV_ENABLE 0x02 /*!< \brief Byte 26 */ #define HCI_SUP_LE_SET_SCAN_PARAM 0x04 /*!< \brief Byte 26 */ #define HCI_SUP_LE_SET_SCAN_ENABLE 0x08 /*!< \brief Byte 26 */ #define HCI_SUP_LE_CREATE_CONN 0x10 /*!< \brief Byte 26 */ #define HCI_SUP_LE_CREATE_CONN_CANCEL 0x20 /*!< \brief Byte 26 */ #define HCI_SUP_LE_READ_WHITE_LIST_SIZE 0x40 /*!< \brief Byte 26 */ #define HCI_SUP_LE_CLEAR_WHITE_LIST 0x80 /*!< \brief Byte 26 */ #define HCI_SUP_LE_ADD_DEV_WHITE_LIST 0x01 /*!< \brief Byte 27 */ #define HCI_SUP_LE_REMOVE_DEV_WHITE_LIST 0x02 /*!< \brief Byte 27 */ #define HCI_SUP_LE_CONN_UPDATE 0x04 /*!< \brief Byte 27 */ #define HCI_SUP_LE_SET_HOST_CHAN_CLASS 0x08 /*!< \brief Byte 27 */ #define HCI_SUP_LE_READ_CHAN_MAP 0x10 /*!< \brief Byte 27 */ #define HCI_SUP_LE_READ_REMOTE_FEAT 0x20 /*!< \brief Byte 27 */ #define HCI_SUP_LE_ENCRYPT 0x40 /*!< \brief Byte 27 */ #define HCI_SUP_LE_RAND 0x80 /*!< \brief Byte 27 */ #define HCI_SUP_LE_START_ENCRYPTION 0x01 /*!< \brief Byte 28 */ #define HCI_SUP_LE_LTK_REQ_REPL 0x02 /*!< \brief Byte 28 */ #define HCI_SUP_LE_LTK_REQ_NEG_REPL 0x04 /*!< \brief Byte 28 */ #define HCI_SUP_LE_READ_SUP_STATES 0x08 /*!< \brief Byte 28 */ #define HCI_SUP_LE_RECEIVER_TEST 0x10 /*!< \brief Byte 28 */ #define HCI_SUP_LE_TRANSMITTER_TEST 0x20 /*!< \brief Byte 28 */ #define HCI_SUP_LE_TEST_END 0x40 /*!< \brief Byte 28 */ #define HCI_SUP_READ_AUTH_PAYLOAD_TO 0x10 /*!< \brief Byte 32 */ #define HCI_SUP_WRITE_AUTH_PAYLOAD_TO 0x20 /*!< \brief Byte 32 */ /*! \brief New in version 4.1 */ #define HCI_SUP_LE_REM_CONN_PARAM_REQ_REPL 0x10 /*!< \brief Byte 33 */ #define HCI_SUP_LE_REM_CONN_PARAM_REQ_NEG_REPL 0x20 /*!< \brief Byte 33 */ /*! \brief New in version 4.2 */ #define HCI_SUP_LE_SET_DATA_LEN 0x40 /*!< \brief Byte 33 */ #define HCI_SUP_LE_READ_DEF_DATA_LEN 0x80 /*!< \brief Byte 33 */ #define HCI_SUP_LE_WRITE_DEF_DATA_LEN 0x01 /*!< \brief Byte 34 */ #define HCI_SUP_LE_READ_LOCAL_P256_PUB_KEY 0x02 /*!< \brief Byte 34 */ #define HCI_SUP_LE_GENERATE_DHKEY 0x04 /*!< \brief Byte 34 */ #define HCI_SUP_LE_ADD_DEV_RES_LIST_EVT 0x08 /*!< \brief Byte 34 */ #define HCI_SUP_LE_REMOVE_DEV_RES_LIST 0x10 /*!< \brief Byte 34 */ #define HCI_SUP_LE_CLEAR_RES_LIST 0x20 /*!< \brief Byte 34 */ #define HCI_SUP_LE_READ_RES_LIST_SIZE 0x40 /*!< \brief Byte 34 */ #define HCI_SUP_LE_READ_PEER_RES_ADDR 0x80 /*!< \brief Byte 34 */ #define HCI_SUP_LE_READ_LOCAL_RES_ADDR 0x01 /*!< \brief Byte 35 */ #define HCI_SUP_LE_SET_ADDR_RES_ENABLE 0x02 /*!< \brief Byte 35 */ #define HCI_SUP_LE_SET_RES_PRIV_ADDR_TO 0x04 /*!< \brief Byte 35 */ #define HCI_SUP_LE_READ_MAX_DATA_LEN 0x08 /*!< \brief Byte 35 */ /*! \brief New in version 5.0 */ #define HCI_SUP_LE_READ_PHY 0x10 /*!< \brief Byte 35 */ #define HCI_SUP_LE_SET_DEF_PHY 0x20 /*!< \brief Byte 35 */ #define HCI_SUP_LE_SET_PHY 0x40 /*!< \brief Byte 35 */ #define HCI_SUP_LE_ENHANCED_RECEIVER_TEST 0x80 /*!< \brief Byte 35 */ #define HCI_SUP_LE_ENHANCED_TRANSMITTER_TEST 0x01 /*!< \brief Byte 36 */ #define HCI_SUP_LE_SET_ADV_SET_RAND_ADDR 0x02 /*!< \brief Byte 36 */ #define HCI_SUP_LE_SET_EXT_ADV_PARAM 0x04 /*!< \brief Byte 36 */ #define HCI_SUP_LE_SET_EXT_ADV_DATA 0x08 /*!< \brief Byte 36 */ #define HCI_SUP_LE_SET_EXT_SCAN_RESP_DATA 0x10 /*!< \brief Byte 36 */ #define HCI_SUP_LE_SET_EXT_ADV_ENABLE 0x20 /*!< \brief Byte 36 */ #define HCI_SUP_LE_READ_MAX_ADV_DATA_LEN 0x40 /*!< \brief Byte 36 */ #define HCI_SUP_LE_READ_NUM_OF_SUP_ADV_SETS 0x80 /*!< \brief Byte 36 */ #define HCI_SUP_LE_REMOVE_ADV_SET 0x01 /*!< \brief Byte 37 */ #define HCI_SUP_LE_CLEAR_ADV_SETS 0x02 /*!< \brief Byte 37 */ #define HCI_SUP_LE_SET_PER_ADV_PARAM 0x04 /*!< \brief Byte 37 */ #define HCI_SUP_LE_SET_PER_ADV_DATA 0x08 /*!< \brief Byte 37 */ #define HCI_SUP_LE_SET_PER_ADV_ENABLE 0x10 /*!< \brief Byte 37 */ #define HCI_SUP_LE_SET_EXT_SCAN_PARAM 0x20 /*!< \brief Byte 37 */ #define HCI_SUP_LE_SET_EXT_SCAN_ENABLE 0x40 /*!< \brief Byte 37 */ #define HCI_SUP_LE_EXT_CREATE_CONN 0x80 /*!< \brief Byte 37 */ #define HCI_SUP_LE_PER_ADV_CREATE_SYNC 0x01 /*!< \brief Byte 38 */ #define HCI_SUP_LE_PER_ADV_CREATE_SYNC_CANCEL 0x02 /*!< \brief Byte 38 */ #define HCI_SUP_LE_PER_ADV_TERMINATE_SYNC 0x04 /*!< \brief Byte 38 */ #define HCI_SUP_LE_ADD_DEV_PER_ADV_LIST 0x08 /*!< \brief Byte 38 */ #define HCI_SUP_LE_REMOVE_DEV_PER_ADV_LIST 0x10 /*!< \brief Byte 38 */ #define HCI_SUP_LE_CLEAR_PER_ADV_LIST 0x20 /*!< \brief Byte 38 */ #define HCI_SUP_LE_READ_PER_ADV_LIST_SIZE 0x40 /*!< \brief Byte 38 */ #define HCI_SUP_LE_READ_TX_POWER 0x80 /*!< \brief Byte 38 */ #define HCI_SUP_LE_READ_RF_PATH_COMP 0x01 /*!< \brief Byte 39 */ #define HCI_SUP_LE_WRITE_RF_PATH_COMP 0x02 /*!< \brief Byte 39 */ #define HCI_SUP_LE_SET_PRIVACY_MODE 0x04 /*!< \brief Byte 39 */ /*! \brief New in version 5.1 */ #define HCI_SUP_LE_RECEIVER_TEST_V3 0x08 /*!< \brief Byte 39 */ #define HCI_SUP_LE_TRANSMITTER_TEST_V3 0x10 /*!< \brief Byte 39 */ #define HCI_SUP_LE_SET_CONNLESS_CTE_TX_PARAMS 0x20 /*!< \brief Byte 39 */ #define HCI_SUP_LE_SET_CONNLESS_CTE_TX_ENABLE 0x40 /*!< \brief Byte 39 */ #define HCI_SUP_LE_SET_CONNLESS_IQ_SAMP_ENABLE 0x80 /*!< \brief Byte 39 */ #define HCI_SUP_LE_SET_CONN_CTE_RX_PARAMS 0x01 /*!< \brief Byte 40 */ #define HCI_SUP_LE_SET_CONN_CTE_TX_PARAMS 0x02 /*!< \brief Byte 40 */ #define HCI_SUP_LE_CONN_CTE_REQ_ENABLE 0x04 /*!< \brief Byte 40 */ #define HCI_SUP_LE_CONN_CTE_RSP_ENABLE 0x08 /*!< \brief Byte 40 */ #define HCI_SUP_LE_READ_ANTENNA_INFO 0x10 /*!< \brief Byte 40 */ #define HCI_SUP_LE_SET_PER_ADV_RCV_ENABLE 0x20 /*!< \brief Byte 40 */ #define HCI_SUP_LE_PER_ADV_SYNC_TRANSFER 0x40 /*!< \brief Byte 40 */ #define HCI_SUP_LE_PER_ADV_SET_INFO_TRANSFER 0x80 /*!< \brief Byte 40 */ #define HCI_SUP_LE_SET_PAST_PARAM 0x01 /*!< \brief Byte 41 */ #define HCI_SUP_LE_SET_DEFAULT_PAST_PARAM 0x02 /*!< \brief Byte 41 */ #define HCI_SUP_LE_GENERATE_DHKEY_V2 0x04 /*!< \brief Byte 41 */ #define HCI_SUP_LE_MODIFY_SLEEP_CLK_ACCURACY 0x10 /*!< \brief Byte 41 */ /*! \brief New in version Milan */ #define HCI_SUP_LE_READ_BUF_SIZE_V2 0x01 /*!< \brief Byte 42 */ #define HCI_SUP_LE_SET_CIG_PARAM 0x02 /*!< \brief Byte 42 */ #define HCI_SUP_LE_CREATE_CIS 0x04 /*!< \brief Byte 42 */ #define HCI_SUP_LE_REMOVE_CIG 0x08 /*!< \brief Byte 42 */ #define HCI_SUP_LE_ACCEPT_CIS_REQ 0x01 /*!< \brief Byte 43 */ #define HCI_SUP_LE_REJECT_CIS_REQ 0x02 /*!< \brief Byte 43 */ #define HCI_SUP_LE_CREATE_BIG 0x04 /*!< \brief Byte 43 */ #define HCI_SUP_LE_BIG_CREATE_SYNC 0x08 /*!< \brief Byte 43 */ #define HCI_SUP_LE_TERMINATE_BIG 0x01 /*!< \brief Byte 44 */ #define HCI_SUP_LE_SETUP_ISO_DATA_PATH 0x02 /*!< \brief Byte 44 */ #define HCI_SUP_LE_REMOVE_ISO_DATA_PATH 0x04 /*!< \brief Byte 44 */ #define HCI_SUP_LE_REQ_PEER_SCA 0x08 /*!< \brief Byte 44 */ #define HCI_SUP_CMD_LEN 64 /*!< \brief Byte length of support cmd field. */ /**@}*/ /** \name Event mask * */ /**@{*/ #define HCI_EVT_MASK_DISCONNECT_CMPL 0x10 /*!< \brief Byte 0 */ #define HCI_EVT_MASK_ENC_CHANGE 0x80 /*!< \brief Byte 0 */ #define HCI_EVT_MASK_READ_REMOTE_VER_INFO_CMPL 0x08 /*!< \brief Byte 1 */ #define HCI_EVT_MASK_HW_ERROR 0x80 /*!< \brief Byte 1 */ #define HCI_EVT_MASK_DATA_BUF_OVERFLOW 0x02 /*!< \brief Byte 3 */ #define HCI_EVT_MASK_ENC_KEY_REFRESH_CMPL 0x80 /*!< \brief Byte 5 */ #define HCI_EVT_MASK_LE_META 0x20 /*!< \brief Byte 7 */ /**@}*/ /** \name Event mask page 2 * */ /**@{*/ #define HCI_EVT_MASK_AUTH_PAYLOAD_TIMEOUT 0x80 /*!< \brief Byte 2 */ /**@}*/ /** \name LE event mask * */ /**@{*/ #define HCI_EVT_MASK_LE_CONN_CMPL_EVT 0x01 /*!< \brief Byte 0 */ #define HCI_EVT_MASK_LE_ADV_REPORT_EVT 0x02 /*!< \brief Byte 0 */ #define HCI_EVT_MASK_LE_CONN_UPDATE_CMPL_EVT 0x04 /*!< \brief Byte 0 */ #define HCI_EVT_MASK_LE_READ_REMOTE_FEAT_CMPL_EVT 0x08 /*!< \brief Byte 0 */ #define HCI_EVT_MASK_LE_LTK_REQ_EVT 0x10 /*!< \brief Byte 0 */ /*! \brief New in version 4.1 */ #define HCI_EVT_MASK_LE_REMOTE_CONN_PARAM_REQ_EVT 0x20 /*!< \brief Byte 0 */ /*! \brief New in version 4.2 */ #define HCI_EVT_MASK_LE_DATA_LEN_CHANGE_EVT 0x40 /*!< \brief Byte 0 */ #define HCI_EVT_MASK_LE_READ_LOCAL_P256_PUB_KEY_CMPL 0x80 /*!< \brief Byte 0 */ #define HCI_EVT_MASK_LE_GENERATE_DHKEY_CMPL 0x01 /*!< \brief Byte 1 */ #define HCI_EVT_MASK_LE_ENHANCED_CONN_CMPL_EVT 0x02 /*!< \brief Byte 1 */ #define HCI_EVT_MASK_LE_DIRECT_ADV_REPORT_EVT 0x04 /*!< \brief Byte 1 */ /*! \brief New in version 5.0 */ #define HCI_EVT_MASK_LE_PHY_UPDATE_CMPL_EVT 0x08 /*!< \brief Byte 1 */ #define HCI_EVT_MASK_LE_EXT_ADV_REPORT_EVT 0x10 /*!< \brief Byte 1 */ #define HCI_EVT_MASK_LE_PER_ADV_SYNC_EST_EVT 0x20 /*!< \brief Byte 1 */ #define HCI_EVT_MASK_LE_PER_ADV_REPORT_EVT 0x40 /*!< \brief Byte 1 */ #define HCI_EVT_MASK_LE_PER_ADV_SYNC_LOST_EVT 0x80 /*!< \brief Byte 1 */ #define HCI_EVT_MASK_LE_SCAN_TIMEOUT_EVT 0x01 /*!< \brief Byte 2 */ #define HCI_EVT_MASK_LE_ADV_SET_TERM_EVT 0x02 /*!< \brief Byte 2 */ #define HCI_EVT_MASK_LE_SCAN_REQ_RCVD_EVT 0x04 /*!< \brief Byte 2 */ #define HCI_EVT_MASK_LE_CH_SEL_ALGO_EVT 0x08 /*!< \brief Byte 2 (Bit 19) */ /*! \brief New in version 5.1 */ #define HCI_EVT_MASK_LE_CONNLESS_IQ_REPORT_EVT 0x10 /*!< \brief Byte 2 */ #define HCI_EVT_MASK_LE_CONN_IQ_REPORT_EVT 0x20 /*!< \brief Byte 2 */ #define HCI_EVT_MASK_LE_CTE_REQ_FAILED_EVT 0x40 /*!< \brief Byte 2 */ #define HCI_EVT_MASK_LE_PER_SYNC_TRSF_RCVT_EVT 0x80 /*!< \brief Byte 2 (Bit 23) */ /*! \brief New in version Milan */ #define HCI_EVT_MASK_LE_CIS_EST_EVT 0x01 /*!< \brief Byte 3 */ #define HCI_EVT_MASK_LE_CIS_REQ_EVT 0x02 /*!< \brief Byte 3 */ #define HCI_EVT_MASK_LE_BIG_CMPL_EVT 0x04 /*!< \brief Byte 3 */ #define HCI_EVT_MASK_LE_BIG_SYNC_LOST_EVT 0x08 /*!< \brief Byte 3 */ #define HCI_EVT_MASK_LE_PEER_SCA_CMPL_EVT 0x10 /*!< \brief Byte 3 */ /**@}*/ /** \name LE supported features * */ /**@{*/ /*! \brief New in version 4.0 */ #define HCI_LE_SUP_FEAT_ENCRYPTION 0x00000001 /*!< \brief Encryption supported */ /*! \brief New in version 4.1 */ #define HCI_LE_SUP_FEAT_CONN_PARAM_REQ_PROC 0x00000002 /*!< \brief Connection Parameters Request Procedure supported */ #define HCI_LE_SUP_FEAT_EXT_REJECT_IND 0x00000004 /*!< \brief Extended Reject Indication supported */ #define HCI_LE_SUP_FEAT_SLV_INIT_FEAT_EXCH 0x00000008 /*!< \brief Slave-Initiated Features Exchange supported */ #define HCI_LE_SUP_FEAT_LE_PING 0x00000010 /*!< \brief LE Ping supported */ /*! \brief New in version 4.2 */ #define HCI_LE_SUP_FEAT_DATA_LEN_EXT 0x00000020 /*!< \brief Data Length Extension supported */ #define HCI_LE_SUP_FEAT_PRIVACY 0x00000040 /*!< \brief LL Privacy supported */ #define HCI_LE_SUP_FEAT_EXT_SCAN_FILT_POLICY 0x00000080 /*!< \brief Extended Scan Filter Policy supported */ /*! \brief New in version 5.0 */ #define HCI_LE_SUP_FEAT_LE_2M_PHY 0x00000100 /*!< \brief LE 2M PHY supported */ #define HCI_LE_SUP_FEAT_STABLE_MOD_IDX_TRANSMITTER 0x00000200 /*!< \brief Stable Modulation Index - Transmitter supported */ #define HCI_LE_SUP_FEAT_STABLE_MOD_IDX_RECEIVER 0x00000400 /*!< \brief Stable Modulation Index - Receiver supported */ #define HCI_LE_SUP_FEAT_LE_CODED_PHY 0x00000800 /*!< \brief LE Coded PHY supported */ #define HCI_LE_SUP_FEAT_LE_EXT_ADV 0x00001000 /*!< \brief LE Extended Advertising supported */ #define HCI_LE_SUP_FEAT_LE_PER_ADV 0x00002000 /*!< \brief LE Periodic Advertising supported */ #define HCI_LE_SUP_FEAT_CH_SEL_2 0x00004000 /*!< \brief Channel Selection Algorithm #2 supported */ #define HCI_LE_SUP_FEAT_LE_POWER_CLASS_1 0x00008000 /*!< \brief LE Power Class 1 supported */ #define HCI_LE_SUP_FEAT_MIN_NUN_USED_CHAN 0x00010000 /*!< \brief Minimum Number of Used Channels Procedure supported */ /*! \brief New in version 5.1 */ #define HCI_LE_SUP_FEAT_CONN_CTE_REQ 0x00020000 /*!< \brief Connection CTE Request supported */ #define HCI_LE_SUP_FEAT_CONN_CTE_RSP 0x00040000 /*!< \brief Connection CTE Response supported */ #define HCI_LE_SUP_FEAT_CONNLESS_CTE_TRANS 0x00080000 /*!< \brief Connectionless CTE Transmitter supported */ #define HCI_LE_SUP_FEAT_CONNLESS_CTE_RECV 0x00100000 /*!< \brief Connectionless CTE Receiver supported */ #define HCI_LE_SUP_FEAT_ANTENNA_SWITCH_AOD 0x00200000 /*!< \brief Anetenna Switching during CTE Transmission (AoD) supported */ #define HCI_LE_SUP_FEAT_ANTENNA_SWITCH_AOA 0x00400000 /*!< \brief Anetenna Switching during CTE Reception (AoA) supported */ #define HCI_LE_SUP_FEAT_RECV_CTE 0x00800000 /*!< \brief Receive Constant Tone Extension supported */ #define HCI_LE_SUP_FEAT_PAST_SENDER 0x01000000 /*!< \brief Periodic Advertising Sync Transfer Sender supported */ #define HCI_LE_SUP_FEAT_PAST_RECIPIENT 0x02000000 /*!< \brief Periodic Advertising Sync Transfer Recipient supported */ #define HCI_LE_SUP_FEAT_SCA_UPDATE 0x04000000 /*!< \brief Sleep Clock Accuracy Update supported */ #define HCI_LE_SUP_FEAT_REMOTE_PUB_KEY_VALIDATION 0x08000000 /*!< \brief Remote Public Key Validation supported */ /*! \brief New in version Milan */ #define HCI_LE_SUP_FEAT_CIS_MASTER 0x10000000 /*!< \brief Connected Isochronous Master Role supported */ #define HCI_LE_SUP_FEAT_CIS_SLAVE 0x20000000 /*!< \brief Connected Isochronous Slave Role supported */ #define HCI_LE_SUP_FEAT_ISO_BROADCASTER 0x40000000 /*!< \brief Isochronous Broadcaster Role supported */ #define HCI_LE_SUP_FEAT_ISO_SYNC 0x80000000 /*!< \brief Isochronous Synchronizer Role supported */ /**@}*/ /** \name Advertising command parameters * */ /**@{*/ #define HCI_ADV_MIN_INTERVAL 0x0020 /*!< \brief Minimum advertising interval */ #define HCI_ADV_MAX_INTERVAL 0x4000 /*!< \brief Maximum advertising interval */ #define HCI_ADV_DIRECTED_MAX_DURATION 0x0500 /*!< \brief Maximum high duty cycle connectable directed advertising duration */ #define HCI_ADV_TYPE_CONN_UNDIRECT 0x00 /*!< \brief Connectable undirected advertising */ #define HCI_ADV_TYPE_CONN_DIRECT 0x01 /*!< \brief Connectable directed high duty cycle advertising */ #define HCI_ADV_TYPE_DISC_UNDIRECT 0x02 /*!< \brief Discoverable undirected advertising */ #define HCI_ADV_TYPE_NONCONN_UNDIRECT 0x03 /*!< \brief Nonconnectable undirected advertising */ #define HCI_ADV_TYPE_CONN_DIRECT_LO_DUTY 0x04 /*!< \brief Connectable directed low duty cycle advertising */ #define HCI_ADV_CHAN_37 0x01 /*!< \brief Advertising channel 37 */ #define HCI_ADV_CHAN_38 0x02 /*!< \brief Advertising channel 38 */ #define HCI_ADV_CHAN_39 0x04 /*!< \brief Advertising channel 39 */ #define HCI_ADV_FILT_NONE 0x00 /*!< \brief No scan request or connection filtering */ #define HCI_ADV_FILT_SCAN 0x01 /*!< \brief White list filters scan requests */ #define HCI_ADV_FILT_CONN 0x02 /*!< \brief White list filters connections */ #define HCI_ADV_FILT_ALL 0x03 /*!< \brief White list filters scan req. and conn. */ /**@}*/ /** \name Scan command parameters * */ /**@{*/ #define HCI_SCAN_TYPE_PASSIVE 0 /*!< \brief Passive scan */ #define HCI_SCAN_TYPE_ACTIVE 1 /*!< \brief Active scan */ #define HCI_SCAN_INTERVAL_MIN 0x0004 /*!< \brief Minimum scan interval */ #define HCI_SCAN_INTERVAL_MAX 0x4000 /*!< \brief Maximum scan interval */ #define HCI_SCAN_INTERVAL_DEFAULT 0x0010 /*!< \brief Default scan interval */ #define HCI_SCAN_WINDOW_MIN 0x0004 /*!< \brief Minimum scan window */ #define HCI_SCAN_WINDOW_MAX 0x4000 /*!< \brief Maximum scan window */ #define HCI_SCAN_WINDOW_DEFAULT 0x0010 /*!< \brief Default scan window */ /**@}*/ /** \name Connection command parameters * */ /**@{*/ #define HCI_CONN_INTERVAL_MIN 0x0006 /*!< \brief Minimum connection interval */ #define HCI_CONN_INTERVAL_MAX 0x0C80 /*!< \brief Maximum connection interval */ #define HCI_CONN_LATENCY_MAX 0x01F3 /*!< \brief Maximum connection latency */ #define HCI_SUP_TIMEOUT_MIN 0x000A /*!< \brief Minimum supervision timeout */ #define HCI_SUP_TIMEOUT_MAX 0x0C80 /*!< \brief Maximum supervision timeout */ /**@}*/ /** \name Connection event parameters * */ /**@{*/ #define HCI_ROLE_MASTER 0 /*!< \brief Role is master */ #define HCI_ROLE_SLAVE 1 /*!< \brief Role is slave */ #define HCI_CLOCK_500PPM 0x00 /*!< \brief 500 ppm clock accuracy */ #define HCI_CLOCK_250PPM 0x01 /*!< \brief 250 ppm clock accuracy */ #define HCI_CLOCK_150PPM 0x02 /*!< \brief 150 ppm clock accuracy */ #define HCI_CLOCK_100PPM 0x03 /*!< \brief 100 ppm clock accuracy */ #define HCI_CLOCK_75PPM 0x04 /*!< \brief 75 ppm clock accuracy */ #define HCI_CLOCK_50PPM 0x05 /*!< \brief 50 ppm clock accuracy */ #define HCI_CLOCK_30PPM 0x06 /*!< \brief 30 ppm clock accuracy */ #define HCI_CLOCK_20PPM 0x07 /*!< \brief 20 ppm clock accuracy */ /**@}*/ /** \name Advertising report event parameters * */ /**@{*/ #define HCI_ADV_CONN_UNDIRECT 0x00 /*!< \brief Connectable undirected advertising */ #define HCI_ADV_CONN_DIRECT 0x01 /*!< \brief Connectable directed advertising */ #define HCI_ADV_DISC_UNDIRECT 0x02 /*!< \brief Discoverable undirected advertising */ #define HCI_ADV_NONCONN_UNDIRECT 0x03 /*!< \brief Non-connectable undirected advertising */ #define HCI_ADV_SCAN_RESPONSE 0x04 /*!< \brief Scan response */ /**@}*/ /** \name Extended advertising data operations * */ /**@{*/ #define HCI_ADV_DATA_OP_FRAG_INTER 0x00 /*!< \brief Intermediate fragment */ #define HCI_ADV_DATA_OP_FRAG_FIRST 0x01 /*!< \brief First fragment */ #define HCI_ADV_DATA_OP_FRAG_LAST 0x02 /*!< \brief Last fragment */ #define HCI_ADV_DATA_OP_COMP_FRAG 0x03 /*!< \brief Complete extended advertising data */ #define HCI_ADV_DATA_OP_UNCHANGED_DATA 0x04 /*!< \brief Unchanged data (just update Advertising DID) */ /**@}*/ /** \name Advertising data fragment preference * */ /**@{*/ #define HCI_ADV_DATA_FRAG_PREF_FRAG 0x00 /*!< \brief Controller may fragment all Host advertising data */ #define HCI_ADV_DATA_FRAG_PREF_NO_FRAG 0x01 /*!< \brief Controller should not fragment nor minimize fragmentation of Host advertising data */ /**@}*/ /** \name Number of advertising sets * */ /**@{*/ #define HCI_ADV_NUM_SETS_ALL_DISABLE 0x00 /*!< \brief Disable all advertising sets */ /**@}*/ /** \name Maximum number of scanning or initiating PHYs * */ /**@{*/ #define HCI_MAX_NUM_PHYS 3 /*!< \brief Maximum number of scanning or initiating PHYs */ /**@}*/ /** \name Advertising PHY values * */ /**@{*/ #define HCI_ADV_PHY_LE_1M 0x01 /*!< \brief LE 1M PHY */ #define HCI_ADV_PHY_LE_2M 0x02 /*!< \brief LE 2M PHY */ #define HCI_ADV_PHY_LE_CODED 0x03 /*!< \brief LE Coded PHY */ /**@}*/ /** \name Scanner PHY value bits * */ /**@{*/ #define HCI_SCAN_PHY_LE_1M_BIT (1<<0) /*!< \brief LE 1M PHY */ #define HCI_SCAN_PHY_LE_2M_BIT (1<<1) /*!< \brief LE 2M PHY */ #define HCI_SCAN_PHY_LE_CODED_BIT (1<<2) /*!< \brief LE Coded PHY */ /**@}*/ /** \name Initiator PHY value bits * */ /**@{*/ #define HCI_INIT_PHY_LE_1M_BIT (1<<0) /*!< \brief LE 1M PHY */ #define HCI_INIT_PHY_LE_2M_BIT (1<<1) /*!< \brief LE 2M PHY */ #define HCI_INIT_PHY_LE_CODED_BIT (1<<2) /*!< \brief LE Coded PHY */ /**@}*/ /** \name Advertising event properties type bits * */ /**@{*/ #define HCI_ADV_PROP_CONN_ADV_BIT (1<<0) /*!< \brief Connectable advertising bit */ #define HCI_ADV_PROP_SCAN_ADV_BIT (1<<1) /*!< \brief Scannable advertising bit */ #define HCI_ADV_PROP_DIRECT_ADV_BIT (1<<2) /*!< \brief Directed advertising bit */ #define HCI_ADV_PROP_CONN_DIRECT_ADV_BIT (1<<3) /*!< \brief High duty cycle connectable directed advertising bit */ #define HCI_ADV_PROP_USE_LEG_PDU_BIT (1<<4) /*!< \brief Use legacy advertising PDUs bit */ #define HCI_ADV_PROP_OMIT_ADV_ADDR_BIT (1<<5) /*!< \brief Omit advertiser's address from all PDUs (anonymous advertising) bit */ #define HCI_ADV_PROP_INC_TX_PWR_BIT (1<<6) /*!< \brief Include TxPower in extended header of advertising PDU bit */ /**@}*/ /** \name Advertising event properties for legacy PDUs * */ /**@{*/ #define HCI_ADV_PROP_LEG_CONN_UNDIRECT 0x13 /*!< \brief Connectable and scannable undirected advertising (00010011b) */ #define HCI_ADV_PROP_LEG_CONN_DIRECT 0x1D /*!< \brief Connectable directed high duty cycle advertising (00011101b) */ #define HCI_ADV_PROP_LEG_SCAN_UNDIRECT 0x12 /*!< \brief Scannable undirected advertising (00010010b) */ #define HCI_ADV_PROP_LEG_NONCONN_UNDIRECT 0x10 /*!< \brief Non-connectable and non-scannable undirected advertising (00010000b) */ #define HCI_ADV_PROP_LEG_CONN_DIRECT_LO_DUTY 0x15 /*!< \brief Connectable directed low duty cycle advertising (00010101b) */ /**@}*/ /** \name Extended advertising report event type bits * */ /**@{*/ #define HCI_ADV_RPT_CONN_ADV_BIT (1<<0) /*!< \brief Connectable advertising event bit */ #define HCI_ADV_RPT_SCAN_ADV_BIT (1<<1) /*!< \brief Scannable advertising event bit */ #define HCI_ADV_RPT_DIRECT_ADV_BIT (1<<2) /*!< \brief Directed advertising event bit */ #define HCI_ADV_RPT_SCAN_RSP_BIT (1<<3) /*!< \brief Scan response event bit */ #define HCI_ADV_RPT_LEG_ADV_BIT (1<<4) /*!< \brief Legacy advertising PDU event bit */ #define HCI_ADV_RPT_DATA_STATUS_BITS (3<<5) /*!< \brief Data status bits */ /**@}*/ /** \name Advertising report event types for legacy PDUs * */ /**@{*/ #define HCI_ADV_RPT_LEG_CONN_UNDIRECT 0x13 /*!< \brief Connectable and scannable undirected advertising (0010011b) */ #define HCI_ADV_RPT_LEG_CONN_DIRECT 0x15 /*!< \brief Connectable directed advertising (0010101b) */ #define HCI_ADV_RPT_LEG_SCAN_UNDIRECT 0x12 /*!< \brief Scannable undirected advertising (0010010b) */ #define HCI_ADV_RPT_LEG_NONCONN_UNDIRECT 0x10 /*!< \brief Non-connectable and non-scannable undirected advertising (0010000b) */ #define HCI_ADV_RPT_LEG_CONN_UNDIRECT_SCAN_RSP 0x1B /*!< \brief Scan response to connectable and scannable undirected advertising (0011011b) */ #define HCI_ADV_RPT_LEG_SCAN_UNDIRECT_SCAN_RSP 0x1A /*!< \brief Scan response to scannable undirected advertising (0011010b) */ /**@}*/ /** \name Advertising report data status * */ /**@{*/ #define HCI_ADV_RPT_DATA_CMPL 0x00 /*!< \brief Data complete */ #define HCI_ADV_RPT_DATA_INCMPL_MORE 0x01 /*!< \brief Data incomplete, more date to come */ #define HCI_ADV_RPT_DATA_INCMPL_TRUNC 0x02 /*!< \brief Data incomplete, data truncated, no more date to come */ /**@}*/ /** \name Extended advertising report event primary PHY values * */ /**@{*/ #define HCI_ADV_RPT_PHY_PRIM_LE_1M 0x01 /*!< \brief Advertiser PHY is LE 1M */ #define HCI_ADV_RPT_PHY_PRIM_LE_CODED 0x03 /*!< \brief Advertiser PHY is LE Coded */ /**@}*/ /** \name Extended advertising report event seconday PHY values * */ /**@{*/ #define HCI_ADV_RPT_PHY_SEC_NONE 0x00 /*!< \brief No packets on seconday advertising channel */ #define HCI_ADV_RPT_PHY_SEC_LE_1M 0x01 /*!< \brief Advertiser PHY is LE 1M */ #define HCI_ADV_RPT_PHY_SEC_LE_2M 0x02 /*!< \brief Advertiser PHY is LE 2M */ #define HCI_ADV_RPT_PHY_SEC_LE_CODED 0x03 /*!< \brief Advertiser PHY is LE Coded */ /**@}*/ /** \name Channel selection algorithm used * */ /**@{*/ #define HCI_CH_SEL_ALGO_1 0x00 /*!< \brief LE channel selection algorithm #1 used */ #define HCI_CH_SEL_ALGO_2 0x01 /*!< \brief LE channel selection algorithm #2 used */ /**@}*/ /** \name KeyType parameters * */ /**@{*/ #define HCI_PRIVATE_KEY_GENERATED 0x00 /*!< \brief Use generated private key */ #define HCI_PRIVATE_KEY_DEBUG 0x01 /*!< \brief Use debug private key */ /**@{*/ /**@{*/ /** \name Minimum number of used channels * */ /**@{*/ #define HCI_MIN_NUM_OF_USED_CHAN 8 /*!< \brief Minimum number of used channels */ /**@}*/ /** \name Synchronization timeout for the periodic advertising * */ /**@{*/ #define HCI_SYNC_MIN_TIMEOUT 0x000A /*!< \brief Minimum synchronization timeout */ #define HCI_SYNC_MAX_TIMEOUT 0x4000 /*!< \brief Maximum synchronization timeout */ /**@}*/ /** \name Maximum synchronization skip * */ /**@{*/ #define HCI_SYNC_MAX_SKIP 0x01F3 /*!< \brief Maximum synchronization skip */ /**@}*/ /** \name Maximum synchronization handle * */ /**@{*/ #define HCI_SYNC_MAX_HANDLE 0x0EFF /*!< \brief Maximum synchronization handle */ /**@}*/ /** \name Periodic sync transfer receive mode * */ /**@{*/ #define HCI_SYNC_TRSF_MODE_OFF 0x00 /*!< \brief Periodic sync transfer receive is disabled */ #define HCI_SYNC_TRSF_MODE_REP_DISABLED 0x01, /*!< \brief Periodic sync transfer receive is enabled, report event is disabled */ #define HCI_SYNC_TRSF_MODE_REP_ENABLED 0x02, /*!< \brief Periodic sync transfer receive is enabled, report event is enabled */ /**@}*/ /** \name Periodic advertising create sync options bits * */ /**@{*/ #define HCI_OPTIONS_FILT_POLICY_BIT (1<<0) /*!< \brief filter policy bit */ #define HCI_OPTIONS_INIT_RPT_ENABLE_BIT (1<<1) /*!< \brief initial periodic advertisement reporting bit */ /**@}*/ /** \name Misc command parameters * */ /**@{*/ #define HCI_READ_TX_PWR_CURRENT 0 /*!< \brief Read current tx power */ #define HCI_READ_TX_PWR_MAX 1 /*!< \brief Read maximum tx power */ #define HCI_TX_PWR_MIN -30 /*!< \brief Minimum tx power dBm */ #define HCI_TX_PWR_MAX 20 /*!< \brief Maximum tx power dBm */ #define HCI_TX_PWR_NO_PREFERENCE 127 /*!< \brief Tx power no preference */ #define HCI_VERSION 6 /*!< \brief HCI specification version */ #define HCI_RSSI_MIN -127 /*!< \brief Minimum RSSI dBm */ #define HCI_RSSI_MAX 20 /*!< \brief Maximum RSSI dBm */ #define HCI_ADDR_TYPE_PUBLIC 0 /*!< \brief Public device address */ #define HCI_ADDR_TYPE_RANDOM 1 /*!< \brief Random device address */ #define HCI_ADDR_TYPE_PUBLIC_IDENTITY 2 /*!< \brief Public identity address */ #define HCI_ADDR_TYPE_RANDOM_IDENTITY 3 /*!< \brief Random identity address */ #define HCI_ADDR_TYPE_ANONYMOUS 0xFF /*!< \brief Anonymous device address */ #define HCI_FILT_NONE 0 /*!< \brief Accept all advertising packets */ #define HCI_FILT_WHITE_LIST 1 /*!< \brief Accept from While List only */ #define HCI_FILT_RES_INIT 2 /*!< \brief Accept directed advertisements with RPAs */ #define HCI_FILT_WHITE_LIST_RES_INIT 3 /*!< \brief Accept from White List or directed advertisements with RPAs */ #define HCI_FILT_PER_ADV_PARAM 0 /*!< \brief Listen to advertiser specified by create sync command parameters */ #define HCI_FILT_PER_ADV_LIST 1 /*!< \brief Listen to advertiser from Periodic Advertiser List only */ #define HCI_ROLE_MASTER 0 /*!< \brief Role is master */ #define HCI_ROLE_SLAVE 1 /*!< \brief Role is slave */ #define HCI_PRIV_MODE_NETWORK 0x00 /*!< \brief Network privacy mode (default) */ #define HCI_PRIV_MODE_DEVICE 0x01 /*!< \brief Device privacy mode */ /**@}*/ /** \name PHY types * */ /**@{*/ #define HCI_PHY_NONE 0x00 /*!< \brief No selected PHY */ #define HCI_PHY_LE_1M_BIT (1<<0) /*!< \brief LE 1M PHY */ #define HCI_PHY_LE_2M_BIT (1<<1) /*!< \brief LE 2M PHY */ #define HCI_PHY_LE_CODED_BIT (1<<2) /*!< \brief LE Coded PHY */ /**@}*/ /** \name All PHYs preference * */ /**@{*/ #define HCI_ALL_PHY_ALL_PREFERENCES 0x00 /*!< \brief All PHY preferences */ #define HCI_ALL_PHY_TX_PREFERENCE_BIT (1<<0) /*!< \brief Tx PHY preference */ #define HCI_ALL_PHY_RX_PREFERENCE_BIT (1<<1) /*!< \brief Rx PHY preference */ /**@}*/ /** \name PHY options * */ /**@{*/ #define HCI_PHY_OPTIONS_NONE 0x00 /*!< \brief No preferences */ #define HCI_PHY_OPTIONS_S2_PREFERRED 0x01 /*!< \brief S=2 coding preferred when transmitting on LE Coded PHY */ #define HCI_PHY_OPTIONS_S8_PREFERRED 0x02 /*!< \brief S=8 coding preferred when transmitting on LE Coded PHY */ /**@}*/ /** \name CTE Slot Durations * */ /**@{*/ #define HCI_CTE_SLOT_DURATION_NONE 0x00 /*!< \brief No switching and sampling */ #define HCI_CTE_SLOT_DURATION_1_US 0x01 /*!< \brief Switching and sampling slots are 1 us each */ #define HCI_CTE_SLOT_DURATION_2_US 0x02 /*!< \brief Switching and sampling slots are 2 us each */ /**@}*/ /** \name Permitted CTE Type bits * */ /**@{*/ #define HCI_CTE_TYPE_PERMIT_AOA_RSP_BIT (1<<0) /*!< \brief Allow AoA Constant Tone Extension Response */ #define HCI_CTE_TYPE_PERMIT_AOD_RSP_1_US_BIT (1<<1) /*!< \brief Allow AoD Constant Tone Extension Response with 1 us slots */ #define HCI_CTE_TYPE_PERMIT_AOD_RSP_2_US_BIT (1<<2) /*!< \brief Allow AoD Constant Tone Extension Response with 2 us slots */ /**@}*/ /** \name Requested CTE Types * */ /**@{*/ #define HCI_CTE_TYPE_REQ_AOA 0x00 /*!< \brief AoA Constant Tone Extension */ #define HCI_CTE_TYPE_REQ_AOD_1_US 0x01 /*!< \brief AoD Constant Tone Extension with 1 us slots */ #define HCI_CTE_TYPE_REQ_AOD_2_US 0x02 /*!< \brief AoD Constant Tone Extension with 2 us slots */ /**@}*/ /** \name Bluetooth core specification versions * */ /**@{*/ #define HCI_VER_BT_CORE_SPEC_4_0 0x06 /*!< Bluetooth core specification 4.0 */ #define HCI_VER_BT_CORE_SPEC_4_1 0x07 /*!< Bluetooth core specification 4.1 */ #define HCI_VER_BT_CORE_SPEC_4_2 0x08 /*!< Bluetooth core specification 4.2 */ #define HCI_VER_BT_CORE_SPEC_5_0 0x09 /*!< Bluetooth core specification 5.0 */ #define HCI_VER_BT_CORE_SPEC_5_1 0x0A /*!< Bluetooth core specification 5.1 */ /**@}*/ /** \name Parameter lengths * */ /**@{*/ #define HCI_EVT_MASK_LEN 8 /*!< \brief Length of event mask byte array */ #define HCI_EVT_MASK_PAGE_2_LEN 8 /*!< \brief Length of event mask page 2 byte array */ #define HCI_LE_EVT_MASK_LEN 8 /*!< \brief Length of LE event mask byte array */ #define HCI_FEAT_LEN 8 /*!< \brief Length of features byte array */ #define HCI_ADV_DATA_LEN 31 /*!< \brief Length of advertising data */ #define HCI_SCAN_DATA_LEN 31 /*!< \brief Length of scan response data */ #define HCI_EXT_ADV_DATA_LEN 251 /*!< \brief Length of extended advertising data */ #define HCI_EXT_ADV_CONN_DATA_LEN 191 /*!< \brief Length of extended connectable advertising data */ #define HCI_PER_ADV_DATA_LEN 252 /*!< \brief Length of periodic advertising data */ #define HCI_EXT_ADV_RPT_DATA_LEN 229 /*!< \brief Length of extended advertising report data */ #define HCI_PER_ADV_RPT_DATA_LEN 247 /*!< \brief Length of periodic advertising report data */ #define HCI_CHAN_MAP_LEN 5 /*!< \brief Length of channel map byte array */ #define HCI_KEY_LEN 16 /*!< \brief Length of encryption key */ #define HCI_ENCRYPT_DATA_LEN 16 /*!< \brief Length of data used in encryption */ #define HCI_RAND_LEN 8 /*!< \brief Length of random number */ #define HCI_LE_STATES_LEN 8 /*!< \brief Length of LE states byte array */ #define HCI_P256_KEY_LEN 64 /*!< \brief Length of P256 key */ #define HCI_DH_KEY_LEN 32 /*!< \brief Length of DH Key */ #define HCI_EXT_ADV_RPT_DATA_LEN_OFFSET 23 /*!< \brief Length field offset of extended advertising report data */ #define HCI_PER_ADV_RPT_DATA_LEN_OFFSET 6 /*!< \brief Length field offset of periodic advertising report data */ /**@}*/ /** \name Number of Antenna IDs in Switching Pattern * */ /**@{*/ #define HCI_MIN_NUM_ANTENNA_IDS 2 /*!< \brief Minimum number of Antenna IDs in switching pattern */ #define HCI_MAX_NUM_ANTENNA_IDS 75 /*!< \brief Maximum number of Antenna IDs in switching pattern */ /**@}*/ /** \name IQ Report Sample Counts * */ /**@{*/ #define HCI_IQ_RPT_SAMPLE_CNT_MIN 9 /*!< \brief Minimum number of sample pairs in IQ report */ #define HCI_IQ_RPT_SAMPLE_CNT_MAX 82 /*!< \brief Maximum number of sample pairs in IQ report */ #define HCI_CONN_IQ_RPT_SAMPLE_CNT_OFFSET 12 /*!< \brief Sample count field offset of connection IQ report */ /**@}*/ /** \name Company ID * */ /**@{*/ #define HCI_ID_ARM 0x005F /*!< \brief ARM Ltd. company ID */ /**@}*/ /** \name Manufacturer location in Local version * */ /**@{*/ #define HCI_LOCAL_VER_MANUFACTURER_POS 4 /*!< \brief Manufacturer location in local version */ /**@}*/ /* \} */ /* STACK_HCI_API */ #ifdef __cplusplus }; #endif #endif /* HCI_DEFS_H */