CRC32B, CRC32H, CRC32W, CRC32X CRC32 checksum This instruction performs a cyclic redundancy check (CRC) calculation on a value held in a general-purpose register. It takes an input CRC value in the first source operand, performs a CRC on the input value in the second source operand, and returns the output CRC value. The second source operand can be 8, 16, 32, or 64 bits. To align with common usage, the bit order of the values is reversed as part of the operation, and the polynomial 0x04C11DB7 is used for the CRC calculation. In an Armv8.0 implementation, this is an OPTIONAL instruction. From Armv8.1, it is mandatory for all implementations to implement this instruction. ID_AA64ISAR0_EL1.CRC32 indicates whether this instruction is supported. If PSTATE.DIT is 1: The execution time of this instruction is independent of: The values of the data supplied in any of its registers. The values of the NZCV flags. The response of this instruction to asynchronous exceptions does not vary based on: The values of the data supplied in any of its registers. The values of the NZCV flags. 0 0 1 1 0 1 0 1 1 0 0 1 0 0 0 0 0 CRC32B <Wd>, <Wn>, <Wm> 0 0 1 CRC32H <Wd>, <Wn>, <Wm> 0 1 0 CRC32W <Wd>, <Wn>, <Wm> 1 1 1 CRC32X <Wd>, <Wn>, <Xm> if !IsFeatureImplemented(FEAT_CRC32) then UNDEFINED; constant integer d = UInt(Rd); constant integer n = UInt(Rn); constant integer m = UInt(Rm); if sf == '1' && sz != '11' then UNDEFINED; if sf == '0' && sz == '11' then UNDEFINED; constant integer size = 8 << UInt(sz); <Wd> Is the 32-bit name of the general-purpose accumulator output register, encoded in the "Rd" field. <Wn> Is the 32-bit name of the general-purpose accumulator input register, encoded in the "Rn" field. <Wm> Is the 32-bit name of the general-purpose data source register, encoded in the "Rm" field. <Xm> Is the 64-bit name of the general-purpose data source register, encoded in the "Rm" field. constant bits(32) acc = X[n, 32]; // accumulator constant bits(size) val = X[m, size]; // input value constant bits(32) poly = 0x04C11DB7<31:0>; constant bits(32+size) tempacc = BitReverse(acc):Zeros(size); constant bits(size+32) tempval = BitReverse(val):Zeros(32); // Poly32Mod2 on a bitstring does a polynomial Modulus over {0,1} operation X[d, 32] = BitReverse(Poly32Mod2(tempacc EOR tempval, poly));