FMINP (vector)
Floating-point minimum pairwise (vector)
This instruction creates a vector by
concatenating the vector elements of the first source SIMD&FP register
after the vector elements of the second source SIMD&FP register, reads each pair of
adjacent vector elements from the concatenated vector,
writes the smaller of each pair of values
into a vector, and writes the vector to the destination SIMD&FP register.
All the values in this instruction are floating-point values.
When FPCR.AH is 0,
the behavior is as follows for each pairwise operation:
Negative zero compares less than positive zero.
When FPCR.DN is 0,
if either element is a NaN, the result is a quiet NaN.
When FPCR.DN is 1,
if either element is a NaN, the result is Default NaN.
When FPCR.AH is 1,
the behavior is as follows for each pairwise operation:
If both elements are zeros, regardless of the sign of either zero,
the result is the second element.
If either element is a NaN, regardless of the value of
FPCR.DN, the result is the second element.
This instruction can generate a floating-point exception.
Depending on the settings in FPCR,
the exception results in either a flag being set in FPSR
or a synchronous exception being generated.
For more information, see
Floating-point exception traps.
Depending on the settings in the CPACR_EL1,
CPTR_EL2, and CPTR_EL3 registers,
and the current Security state and Exception level,
an attempt to execute the instruction might be trapped.
It has encodings from 2 classes:
Half-precision
and
Single-precision and double-precision
0
1
0
1
1
1
0
1
1
0
0
0
1
1
0
1
FMINP <Vd>.<T>, <Vn>.<T>, <Vm>.<T>
if !IsFeatureImplemented(FEAT_FP16) then UNDEFINED;
constant integer d = UInt(Rd);
constant integer n = UInt(Rn);
constant integer m = UInt(Rm);
constant integer esize = 16;
constant integer datasize = 64 << UInt(Q);
constant integer elements = datasize DIV esize;
0
1
0
1
1
1
0
1
1
1
1
1
1
0
1
FMINP <Vd>.<T>, <Vn>.<T>, <Vm>.<T>
if sz:Q == '10' then UNDEFINED;
constant integer d = UInt(Rd);
constant integer n = UInt(Rn);
constant integer m = UInt(Rm);
constant integer esize = 32 << UInt(sz);
constant integer datasize = 64 << UInt(Q);
constant integer elements = datasize DIV esize;
<Vd>
Is the name of the SIMD&FP destination register, encoded in the "Rd" field.
<T>
For the half-precision variant: is an arrangement specifier,
<T>
For the single-precision and double-precision variant: is an arrangement specifier,
sz
Q
<T>
0
0
2S
0
1
4S
1
0
RESERVED
1
1
2D
<Vn>
Is the name of the first SIMD&FP source register, encoded in the "Rn" field.
<Vm>
Is the name of the second SIMD&FP source register, encoded in the "Rm" field.
CheckFPAdvSIMDEnabled64();
constant bits(datasize) operand1 = V[n, datasize];
constant bits(datasize) operand2 = V[m, datasize];
bits(datasize) result;
constant bits(2*datasize) concat = operand2:operand1;
bits(esize) element1;
bits(esize) element2;
for e = 0 to elements-1
element1 = Elem[concat, 2*e, esize];
element2 = Elem[concat, (2*e)+1, esize];
Elem[result, e, esize] = FPMin(element1, element2, FPCR);
V[d, datasize] = result;