FMSUB Floating-point fused multiply-subtract (scalar) This instruction multiplies the values of the first two SIMD&FP source registers, negates the product, adds that to the value of the third SIMD&FP source register, and writes the result to the SIMD&FP destination register. A floating-point exception can be generated by this instruction. Depending on the settings in FPCR, the exception results in either a flag being set in FPSR, or a synchronous exception being generated. For more information, see Floating-point exception traps. Depending on the settings in the CPACR_EL1, CPTR_EL2, and CPTR_EL3 registers, and the current Security state and Exception level, an attempt to execute the instruction might be trapped. 0 0 0 1 1 1 1 1 0 1 1 1 FMSUB <Hd>, <Hn>, <Hm>, <Ha> 0 0 FMSUB <Sd>, <Sn>, <Sm>, <Sa> 0 1 FMSUB <Dd>, <Dn>, <Dm>, <Da> if ftype == '10' || (ftype == '11' && !IsFeatureImplemented(FEAT_FP16)) then UNDEFINED; constant integer d = UInt(Rd); constant integer n = UInt(Rn); constant integer m = UInt(Rm); constant integer a = UInt(Ra); constant integer esize = 8 << UInt(ftype EOR '10'); <Hd> Is the 16-bit name of the SIMD&FP destination register, encoded in the "Rd" field. <Hn> Is the 16-bit name of the first SIMD&FP source register holding the multiplicand, encoded in the "Rn" field. <Hm> Is the 16-bit name of the second SIMD&FP source register holding the multiplier, encoded in the "Rm" field. <Ha> Is the 16-bit name of the third SIMD&FP source register holding the minuend, encoded in the "Ra" field. <Sd> Is the 32-bit name of the SIMD&FP destination register, encoded in the "Rd" field. <Sn> Is the 32-bit name of the first SIMD&FP source register holding the multiplicand, encoded in the "Rn" field. <Sm> Is the 32-bit name of the second SIMD&FP source register holding the multiplier, encoded in the "Rm" field. <Sa> Is the 32-bit name of the third SIMD&FP source register holding the minuend, encoded in the "Ra" field. <Dd> Is the 64-bit name of the SIMD&FP destination register, encoded in the "Rd" field. <Dn> Is the 64-bit name of the first SIMD&FP source register holding the multiplicand, encoded in the "Rn" field. <Dm> Is the 64-bit name of the second SIMD&FP source register holding the multiplier, encoded in the "Rm" field. <Da> Is the 64-bit name of the third SIMD&FP source register holding the minuend, encoded in the "Ra" field. CheckFPEnabled64(); constant bits(esize) addend = V[a, esize]; constant bits(esize) operand1 = FPNeg(V[n, esize], FPCR); constant bits(esize) operand2 = V[m, esize]; bits(128) result = if IsMerging(FPCR) then V[a, 128] else Zeros(128); Elem[result, 0, esize] = FPMulAdd(addend, operand1, operand2, FPCR); V[d, 128] = result;