LDAXRH Load-acquire exclusive register halfword This instruction derives an address from a base register value, loads a halfword from memory, zero-extends it and writes it to a register. The memory access is atomic. The PE marks the physical address being accessed as an exclusive access. This exclusive access mark is checked by Store Exclusive instructions. See Synchronization and semaphores. The instruction also has memory ordering semantics as described in Load-Acquire, Store-Release. For information about addressing modes, see Load/Store addressing modes. If PSTATE.DIT is 1, the timing of this instruction is insensitive to the value of the data being loaded or stored. 0 1 0 0 1 0 0 0 0 1 0 (1) (1) (1) (1) (1) 1 (1) (1) (1) (1) (1) LDAXRH <Wt>, [<Xn|SP>{, #0}] constant integer t = UInt(Rt); constant integer n = UInt(Rn); constant boolean acqrel = TRUE; constant boolean tagchecked = n != 31; <Wt> Is the 32-bit name of the general-purpose register to be transferred, encoded in the "Rt" field. <Xn|SP> Is the 64-bit name of the general-purpose base register or stack pointer, encoded in the "Rn" field. bits(64) address; bits(16) data; constant boolean privileged = PSTATE.EL != EL0; constant AccessDescriptor accdesc = CreateAccDescExLDST(MemOp_LOAD, acqrel, tagchecked, privileged); if n == 31 then CheckSPAlignment(); address = SP[]; else address = X[n, 64]; // Tell the Exclusives monitors to record a sequence of one or more atomic // memory reads from virtual address range [address, address+dbytes-1]. // The Exclusives monitor will only be set if all the reads are from the // same dbytes-aligned physical address, to allow for the possibility of // an atomicity break if the translation is changed between reads. AArch64.SetExclusiveMonitors(address, 2); data = Mem[address, 2, accdesc]; X[t, 32] = ZeroExtend(data, 32);