SHRN, SHRN2 Shift right narrow (immediate) This instruction reads each unsigned integer value from the source SIMD&FP register, right shifts each result by an immediate value, puts the final result into a vector, and writes the vector to the lower or upper half of the destination SIMD&FP register. The destination vector elements are half as long as the source vector elements. The results are truncated. For rounded results, see RSHRN. The SHRN instruction writes the vector to the lower half of the destination register and clears the upper half. The SHRN2 instruction writes the vector to the upper half of the destination register without affecting the other bits of the register. Depending on the settings in the CPACR_EL1, CPTR_EL2, and CPTR_EL3 registers, and the current Security state and Exception level, an attempt to execute the instruction might be trapped. If PSTATE.DIT is 1: The execution time of this instruction is independent of: The values of the data supplied in any of its registers. The values of the NZCV flags. The response of this instruction to asynchronous exceptions does not vary based on: The values of the data supplied in any of its registers. The values of the NZCV flags. 0 0 0 1 1 1 1 0 != 0000 1 0 0 0 0 1 SHRN{2} <Vd>.<Tb>, <Vn>.<Ta>, #<shift> if immh == '0000' then SEE(asimdimm); if immh<3> == '1' then UNDEFINED; constant integer d = UInt(Rd); constant integer n = UInt(Rn); constant integer esize = 8 << HighestSetBitNZ(immh<2:0>); constant integer datasize = 64; constant integer part = UInt(Q); constant integer elements = datasize DIV esize; constant integer shift = (2 * esize) - UInt(immh:immb); constant boolean round = FALSE; 2 Is the second and upper half specifier. If present it causes the operation to be performed on the upper 64 bits of the registers holding the narrower elements, and is Q 2 0 [absent] 1 [present] <Vd> Is the name of the SIMD&FP destination register, encoded in the "Rd" field. <Tb> Is an arrangement specifier, immh Q <Tb> 0001 0 8B 0001 1 16B 001x 0 4H 001x 1 8H 01xx 0 2S 01xx 1 4S 1xxx x RESERVED <Vn> Is the name of the SIMD&FP source register, encoded in the "Rn" field. <Ta> Is an arrangement specifier, immh <Ta> 0001 8H 001x 4S 01xx 2D 1xxx RESERVED <shift> Is the right shift amount, in the range 1 to the destination element width in bits, immh <shift> 0001 16 - UInt(immh:immb) 001x 32 - UInt(immh:immb) 01xx 64 - UInt(immh:immb) 1xxx RESERVED CheckFPAdvSIMDEnabled64(); constant bits(datasize*2) operand = V[n, datasize*2]; bits(datasize) result; integer element; for e = 0 to elements-1 element = RShr(UInt(Elem[operand, e, 2*esize]), shift, round); Elem[result, e, esize] = element<esize-1:0>; Vpart[d, part, datasize] = result;