#[repr(C)]
#[doc = "Register block"]
pub struct RegisterBlock {
    cr: Cr,
    mr: Mr,
    seqr0: Seqr0,
    seqr1: Seqr1,
    cher: Cher,
    chdr: Chdr,
    chsr: Chsr,
    _reserved7: [u8; 0x04],
    lcdr: Lcdr,
    ier: Ier,
    idr: Idr,
    imr: Imr,
    isr: Isr,
    _reserved12: [u8; 0x08],
    over: Over,
    emr: Emr,
    cwr: Cwr,
    cgr: Cgr,
    cor: Cor,
    cdr0: Cdr0,
    cdr1: Cdr1,
    cdr2: Cdr2,
    cdr3: Cdr3,
    cdr4: Cdr4,
    cdr5: Cdr5,
    cdr6: Cdr6,
    cdr7: Cdr7,
    cdr8: Cdr8,
    cdr9: Cdr9,
    cdr10: Cdr10,
    cdr11: Cdr11,
    cdr12: Cdr12,
    cdr13: Cdr13,
    cdr14: Cdr14,
    _reserved32: [u8; 0x08],
    acr: Acr,
    _reserved33: [u8; 0x4c],
    wpmr: Wpmr,
    wpsr: Wpsr,
    _reserved35: [u8; 0x14],
    rpr: Rpr,
    rcr: Rcr,
    _reserved37: [u8; 0x08],
    rnpr: Rnpr,
    rncr: Rncr,
    _reserved39: [u8; 0x08],
    ptcr: Ptcr,
    ptsr: Ptsr,
}
impl RegisterBlock {
    #[doc = "0x00 - Control Register"]
    #[inline(always)]
    pub const fn cr(&self) -> &Cr {
        &self.cr
    }
    #[doc = "0x04 - Mode Register"]
    #[inline(always)]
    pub const fn mr(&self) -> &Mr {
        &self.mr
    }
    #[doc = "0x08 - Channel Sequence Register 0"]
    #[inline(always)]
    pub const fn seqr0(&self) -> &Seqr0 {
        &self.seqr0
    }
    #[doc = "0x0c - Channel Sequence Register 1"]
    #[inline(always)]
    pub const fn seqr1(&self) -> &Seqr1 {
        &self.seqr1
    }
    #[doc = "0x10 - Channel Enable Register"]
    #[inline(always)]
    pub const fn cher(&self) -> &Cher {
        &self.cher
    }
    #[doc = "0x14 - Channel Disable Register"]
    #[inline(always)]
    pub const fn chdr(&self) -> &Chdr {
        &self.chdr
    }
    #[doc = "0x18 - Channel Status Register"]
    #[inline(always)]
    pub const fn chsr(&self) -> &Chsr {
        &self.chsr
    }
    #[doc = "0x20 - Last Converted Data Register"]
    #[inline(always)]
    pub const fn lcdr(&self) -> &Lcdr {
        &self.lcdr
    }
    #[doc = "0x24 - Interrupt Enable Register"]
    #[inline(always)]
    pub const fn ier(&self) -> &Ier {
        &self.ier
    }
    #[doc = "0x28 - Interrupt Disable Register"]
    #[inline(always)]
    pub const fn idr(&self) -> &Idr {
        &self.idr
    }
    #[doc = "0x2c - Interrupt Mask Register"]
    #[inline(always)]
    pub const fn imr(&self) -> &Imr {
        &self.imr
    }
    #[doc = "0x30 - Interrupt Status Register"]
    #[inline(always)]
    pub const fn isr(&self) -> &Isr {
        &self.isr
    }
    #[doc = "0x3c - Overrun Status Register"]
    #[inline(always)]
    pub const fn over(&self) -> &Over {
        &self.over
    }
    #[doc = "0x40 - Extended Mode Register"]
    #[inline(always)]
    pub const fn emr(&self) -> &Emr {
        &self.emr
    }
    #[doc = "0x44 - Compare Window Register"]
    #[inline(always)]
    pub const fn cwr(&self) -> &Cwr {
        &self.cwr
    }
    #[doc = "0x48 - Channel Gain Register"]
    #[inline(always)]
    pub const fn cgr(&self) -> &Cgr {
        &self.cgr
    }
    #[doc = "0x4c - Channel Offset Register"]
    #[inline(always)]
    pub const fn cor(&self) -> &Cor {
        &self.cor
    }
    #[doc = "0x50 - Channel Data Register 0"]
    #[inline(always)]
    pub const fn cdr0(&self) -> &Cdr0 {
        &self.cdr0
    }
    #[doc = "0x54 - Channel Data Register 1"]
    #[inline(always)]
    pub const fn cdr1(&self) -> &Cdr1 {
        &self.cdr1
    }
    #[doc = "0x58 - Channel Data Register 2"]
    #[inline(always)]
    pub const fn cdr2(&self) -> &Cdr2 {
        &self.cdr2
    }
    #[doc = "0x5c - Channel Data Register 3"]
    #[inline(always)]
    pub const fn cdr3(&self) -> &Cdr3 {
        &self.cdr3
    }
    #[doc = "0x60 - Channel Data Register 4"]
    #[inline(always)]
    pub const fn cdr4(&self) -> &Cdr4 {
        &self.cdr4
    }
    #[doc = "0x64 - Channel Data Register 5"]
    #[inline(always)]
    pub const fn cdr5(&self) -> &Cdr5 {
        &self.cdr5
    }
    #[doc = "0x68 - Channel Data Register 6"]
    #[inline(always)]
    pub const fn cdr6(&self) -> &Cdr6 {
        &self.cdr6
    }
    #[doc = "0x6c - Channel Data Register 7"]
    #[inline(always)]
    pub const fn cdr7(&self) -> &Cdr7 {
        &self.cdr7
    }
    #[doc = "0x70 - Channel Data Register 8"]
    #[inline(always)]
    pub const fn cdr8(&self) -> &Cdr8 {
        &self.cdr8
    }
    #[doc = "0x74 - Channel Data Register 9"]
    #[inline(always)]
    pub const fn cdr9(&self) -> &Cdr9 {
        &self.cdr9
    }
    #[doc = "0x78 - Channel Data Register 10"]
    #[inline(always)]
    pub const fn cdr10(&self) -> &Cdr10 {
        &self.cdr10
    }
    #[doc = "0x7c - Channel Data Register 11"]
    #[inline(always)]
    pub const fn cdr11(&self) -> &Cdr11 {
        &self.cdr11
    }
    #[doc = "0x80 - Channel Data Register 12"]
    #[inline(always)]
    pub const fn cdr12(&self) -> &Cdr12 {
        &self.cdr12
    }
    #[doc = "0x84 - Channel Data Register 13"]
    #[inline(always)]
    pub const fn cdr13(&self) -> &Cdr13 {
        &self.cdr13
    }
    #[doc = "0x88 - Channel Data Register 14"]
    #[inline(always)]
    pub const fn cdr14(&self) -> &Cdr14 {
        &self.cdr14
    }
    #[doc = "0x94 - Analog Control Register"]
    #[inline(always)]
    pub const fn acr(&self) -> &Acr {
        &self.acr
    }
    #[doc = "0xe4 - Write Protect Mode Register"]
    #[inline(always)]
    pub const fn wpmr(&self) -> &Wpmr {
        &self.wpmr
    }
    #[doc = "0xe8 - Write Protect Status Register"]
    #[inline(always)]
    pub const fn wpsr(&self) -> &Wpsr {
        &self.wpsr
    }
    #[doc = "0x100 - Receive Pointer Register"]
    #[inline(always)]
    pub const fn rpr(&self) -> &Rpr {
        &self.rpr
    }
    #[doc = "0x104 - Receive Counter Register"]
    #[inline(always)]
    pub const fn rcr(&self) -> &Rcr {
        &self.rcr
    }
    #[doc = "0x110 - Receive Next Pointer Register"]
    #[inline(always)]
    pub const fn rnpr(&self) -> &Rnpr {
        &self.rnpr
    }
    #[doc = "0x114 - Receive Next Counter Register"]
    #[inline(always)]
    pub const fn rncr(&self) -> &Rncr {
        &self.rncr
    }
    #[doc = "0x120 - Transfer Control Register"]
    #[inline(always)]
    pub const fn ptcr(&self) -> &Ptcr {
        &self.ptcr
    }
    #[doc = "0x124 - Transfer Status Register"]
    #[inline(always)]
    pub const fn ptsr(&self) -> &Ptsr {
        &self.ptsr
    }
}
#[doc = "CR (w) register accessor: Control Register\n\nYou can [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cr::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cr`]
module"]
#[doc(alias = "CR")]
pub type Cr = crate::Reg<cr::CrSpec>;
#[doc = "Control Register"]
pub mod cr;
#[doc = "MR (rw) register accessor: Mode Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`mr::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`mr::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@mr`]
module"]
#[doc(alias = "MR")]
pub type Mr = crate::Reg<mr::MrSpec>;
#[doc = "Mode Register"]
pub mod mr;
#[doc = "SEQR0 (rw) register accessor: Channel Sequence Register 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`seqr0::R`].  You can [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`seqr0::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@seqr0`]
module"]
#[doc(alias = "SEQR0")]
pub type Seqr0 = crate::Reg<seqr0::Seqr0Spec>;
#[doc = "Channel Sequence Register 0"]
pub mod seqr0;
#[doc = "SEQR1 (rw) register accessor: Channel Sequence Register 1\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`seqr1::R`].  You can [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`seqr1::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@seqr1`]
module"]
#[doc(alias = "SEQR1")]
pub type Seqr1 = crate::Reg<seqr1::Seqr1Spec>;
#[doc = "Channel Sequence Register 1"]
pub mod seqr1;
#[doc = "CHER (w) register accessor: Channel Enable Register\n\nYou can [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cher::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cher`]
module"]
#[doc(alias = "CHER")]
pub type Cher = crate::Reg<cher::CherSpec>;
#[doc = "Channel Enable Register"]
pub mod cher;
#[doc = "CHDR (w) register accessor: Channel Disable Register\n\nYou can [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`chdr::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@chdr`]
module"]
#[doc(alias = "CHDR")]
pub type Chdr = crate::Reg<chdr::ChdrSpec>;
#[doc = "Channel Disable Register"]
pub mod chdr;
#[doc = "CHSR (r) register accessor: Channel Status Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`chsr::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@chsr`]
module"]
#[doc(alias = "CHSR")]
pub type Chsr = crate::Reg<chsr::ChsrSpec>;
#[doc = "Channel Status Register"]
pub mod chsr;
#[doc = "LCDR (r) register accessor: Last Converted Data Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`lcdr::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@lcdr`]
module"]
#[doc(alias = "LCDR")]
pub type Lcdr = crate::Reg<lcdr::LcdrSpec>;
#[doc = "Last Converted Data Register"]
pub mod lcdr;
#[doc = "IER (w) register accessor: Interrupt Enable Register\n\nYou can [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ier::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ier`]
module"]
#[doc(alias = "IER")]
pub type Ier = crate::Reg<ier::IerSpec>;
#[doc = "Interrupt Enable Register"]
pub mod ier;
#[doc = "IDR (w) register accessor: Interrupt Disable Register\n\nYou can [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`idr::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@idr`]
module"]
#[doc(alias = "IDR")]
pub type Idr = crate::Reg<idr::IdrSpec>;
#[doc = "Interrupt Disable Register"]
pub mod idr;
#[doc = "IMR (r) register accessor: Interrupt Mask Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`imr::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@imr`]
module"]
#[doc(alias = "IMR")]
pub type Imr = crate::Reg<imr::ImrSpec>;
#[doc = "Interrupt Mask Register"]
pub mod imr;
#[doc = "ISR (r) register accessor: Interrupt Status Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`isr::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@isr`]
module"]
#[doc(alias = "ISR")]
pub type Isr = crate::Reg<isr::IsrSpec>;
#[doc = "Interrupt Status Register"]
pub mod isr;
#[doc = "OVER (r) register accessor: Overrun Status Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`over::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@over`]
module"]
#[doc(alias = "OVER")]
pub type Over = crate::Reg<over::OverSpec>;
#[doc = "Overrun Status Register"]
pub mod over;
#[doc = "EMR (rw) register accessor: Extended Mode Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`emr::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`emr::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@emr`]
module"]
#[doc(alias = "EMR")]
pub type Emr = crate::Reg<emr::EmrSpec>;
#[doc = "Extended Mode Register"]
pub mod emr;
#[doc = "CWR (rw) register accessor: Compare Window Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cwr::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cwr::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cwr`]
module"]
#[doc(alias = "CWR")]
pub type Cwr = crate::Reg<cwr::CwrSpec>;
#[doc = "Compare Window Register"]
pub mod cwr;
#[doc = "CGR (rw) register accessor: Channel Gain Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cgr::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cgr::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cgr`]
module"]
#[doc(alias = "CGR")]
pub type Cgr = crate::Reg<cgr::CgrSpec>;
#[doc = "Channel Gain Register"]
pub mod cgr;
#[doc = "COR (rw) register accessor: Channel Offset Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cor::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cor::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cor`]
module"]
#[doc(alias = "COR")]
pub type Cor = crate::Reg<cor::CorSpec>;
#[doc = "Channel Offset Register"]
pub mod cor;
#[doc = "CDR0 (r) register accessor: Channel Data Register 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cdr0::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cdr0`]
module"]
#[doc(alias = "CDR0")]
pub type Cdr0 = crate::Reg<cdr0::Cdr0Spec>;
#[doc = "Channel Data Register 0"]
pub mod cdr0;
#[doc = "CDR1 (r) register accessor: Channel Data Register 1\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cdr1::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cdr1`]
module"]
#[doc(alias = "CDR1")]
pub type Cdr1 = crate::Reg<cdr1::Cdr1Spec>;
#[doc = "Channel Data Register 1"]
pub mod cdr1;
#[doc = "CDR2 (r) register accessor: Channel Data Register 2\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cdr2::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cdr2`]
module"]
#[doc(alias = "CDR2")]
pub type Cdr2 = crate::Reg<cdr2::Cdr2Spec>;
#[doc = "Channel Data Register 2"]
pub mod cdr2;
#[doc = "CDR3 (r) register accessor: Channel Data Register 3\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cdr3::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cdr3`]
module"]
#[doc(alias = "CDR3")]
pub type Cdr3 = crate::Reg<cdr3::Cdr3Spec>;
#[doc = "Channel Data Register 3"]
pub mod cdr3;
#[doc = "CDR4 (r) register accessor: Channel Data Register 4\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cdr4::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cdr4`]
module"]
#[doc(alias = "CDR4")]
pub type Cdr4 = crate::Reg<cdr4::Cdr4Spec>;
#[doc = "Channel Data Register 4"]
pub mod cdr4;
#[doc = "CDR5 (r) register accessor: Channel Data Register 5\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cdr5::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cdr5`]
module"]
#[doc(alias = "CDR5")]
pub type Cdr5 = crate::Reg<cdr5::Cdr5Spec>;
#[doc = "Channel Data Register 5"]
pub mod cdr5;
#[doc = "CDR6 (r) register accessor: Channel Data Register 6\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cdr6::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cdr6`]
module"]
#[doc(alias = "CDR6")]
pub type Cdr6 = crate::Reg<cdr6::Cdr6Spec>;
#[doc = "Channel Data Register 6"]
pub mod cdr6;
#[doc = "CDR7 (r) register accessor: Channel Data Register 7\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cdr7::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cdr7`]
module"]
#[doc(alias = "CDR7")]
pub type Cdr7 = crate::Reg<cdr7::Cdr7Spec>;
#[doc = "Channel Data Register 7"]
pub mod cdr7;
#[doc = "CDR8 (r) register accessor: Channel Data Register 8\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cdr8::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cdr8`]
module"]
#[doc(alias = "CDR8")]
pub type Cdr8 = crate::Reg<cdr8::Cdr8Spec>;
#[doc = "Channel Data Register 8"]
pub mod cdr8;
#[doc = "CDR9 (r) register accessor: Channel Data Register 9\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cdr9::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cdr9`]
module"]
#[doc(alias = "CDR9")]
pub type Cdr9 = crate::Reg<cdr9::Cdr9Spec>;
#[doc = "Channel Data Register 9"]
pub mod cdr9;
#[doc = "CDR10 (r) register accessor: Channel Data Register 10\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cdr10::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cdr10`]
module"]
#[doc(alias = "CDR10")]
pub type Cdr10 = crate::Reg<cdr10::Cdr10Spec>;
#[doc = "Channel Data Register 10"]
pub mod cdr10;
#[doc = "CDR11 (r) register accessor: Channel Data Register 11\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cdr11::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cdr11`]
module"]
#[doc(alias = "CDR11")]
pub type Cdr11 = crate::Reg<cdr11::Cdr11Spec>;
#[doc = "Channel Data Register 11"]
pub mod cdr11;
#[doc = "CDR12 (r) register accessor: Channel Data Register 12\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cdr12::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cdr12`]
module"]
#[doc(alias = "CDR12")]
pub type Cdr12 = crate::Reg<cdr12::Cdr12Spec>;
#[doc = "Channel Data Register 12"]
pub mod cdr12;
#[doc = "CDR13 (r) register accessor: Channel Data Register 13\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cdr13::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cdr13`]
module"]
#[doc(alias = "CDR13")]
pub type Cdr13 = crate::Reg<cdr13::Cdr13Spec>;
#[doc = "Channel Data Register 13"]
pub mod cdr13;
#[doc = "CDR14 (r) register accessor: Channel Data Register 14\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cdr14::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cdr14`]
module"]
#[doc(alias = "CDR14")]
pub type Cdr14 = crate::Reg<cdr14::Cdr14Spec>;
#[doc = "Channel Data Register 14"]
pub mod cdr14;
#[doc = "ACR (rw) register accessor: Analog Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`acr::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`acr::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@acr`]
module"]
#[doc(alias = "ACR")]
pub type Acr = crate::Reg<acr::AcrSpec>;
#[doc = "Analog Control Register"]
pub mod acr;
#[doc = "WPMR (rw) register accessor: Write Protect Mode Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`wpmr::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`wpmr::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@wpmr`]
module"]
#[doc(alias = "WPMR")]
pub type Wpmr = crate::Reg<wpmr::WpmrSpec>;
#[doc = "Write Protect Mode Register"]
pub mod wpmr;
#[doc = "WPSR (r) register accessor: Write Protect Status Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`wpsr::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@wpsr`]
module"]
#[doc(alias = "WPSR")]
pub type Wpsr = crate::Reg<wpsr::WpsrSpec>;
#[doc = "Write Protect Status Register"]
pub mod wpsr;
#[doc = "RPR (rw) register accessor: Receive Pointer Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`rpr::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`rpr::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rpr`]
module"]
#[doc(alias = "RPR")]
pub type Rpr = crate::Reg<rpr::RprSpec>;
#[doc = "Receive Pointer Register"]
pub mod rpr;
#[doc = "RCR (rw) register accessor: Receive Counter Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`rcr::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`rcr::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rcr`]
module"]
#[doc(alias = "RCR")]
pub type Rcr = crate::Reg<rcr::RcrSpec>;
#[doc = "Receive Counter Register"]
pub mod rcr;
#[doc = "RNPR (rw) register accessor: Receive Next Pointer Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`rnpr::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`rnpr::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rnpr`]
module"]
#[doc(alias = "RNPR")]
pub type Rnpr = crate::Reg<rnpr::RnprSpec>;
#[doc = "Receive Next Pointer Register"]
pub mod rnpr;
#[doc = "RNCR (rw) register accessor: Receive Next Counter Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`rncr::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`rncr::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rncr`]
module"]
#[doc(alias = "RNCR")]
pub type Rncr = crate::Reg<rncr::RncrSpec>;
#[doc = "Receive Next Counter Register"]
pub mod rncr;
#[doc = "PTCR (w) register accessor: Transfer Control Register\n\nYou can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ptcr::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ptcr`]
module"]
#[doc(alias = "PTCR")]
pub type Ptcr = crate::Reg<ptcr::PtcrSpec>;
#[doc = "Transfer Control Register"]
pub mod ptcr;
#[doc = "PTSR (r) register accessor: Transfer Status Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ptsr::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ptsr`]
module"]
#[doc(alias = "PTSR")]
pub type Ptsr = crate::Reg<ptsr::PtsrSpec>;
#[doc = "Transfer Status Register"]
pub mod ptsr;