#[repr(C)]
#[doc = "Register block"]
pub struct RegisterBlock {
    ctrla: Ctrla,
    ctrlb: Ctrlb,
    baud: Baud,
    rxdata: Rxdata,
    txdata: Txdata,
    intenclr: Intenclr,
    intenset: Intenset,
    intflag: Intflag,
    status: Status,
    _reserved9: [u8; 0x0c],
    instraddr: Instraddr,
    instrctrl: Instrctrl,
    instrframe: Instrframe,
    _reserved12: [u8; 0x04],
    scrambctrl: Scrambctrl,
    scrambkey: Scrambkey,
}
impl RegisterBlock {
    #[doc = "0x00 - Control A"]
    #[inline(always)]
    pub const fn ctrla(&self) -> &Ctrla {
        &self.ctrla
    }
    #[doc = "0x04 - Control B"]
    #[inline(always)]
    pub const fn ctrlb(&self) -> &Ctrlb {
        &self.ctrlb
    }
    #[doc = "0x08 - Baud Rate"]
    #[inline(always)]
    pub const fn baud(&self) -> &Baud {
        &self.baud
    }
    #[doc = "0x0c - Receive Data"]
    #[inline(always)]
    pub const fn rxdata(&self) -> &Rxdata {
        &self.rxdata
    }
    #[doc = "0x10 - Transmit Data"]
    #[inline(always)]
    pub const fn txdata(&self) -> &Txdata {
        &self.txdata
    }
    #[doc = "0x14 - Interrupt Enable Clear"]
    #[inline(always)]
    pub const fn intenclr(&self) -> &Intenclr {
        &self.intenclr
    }
    #[doc = "0x18 - Interrupt Enable Set"]
    #[inline(always)]
    pub const fn intenset(&self) -> &Intenset {
        &self.intenset
    }
    #[doc = "0x1c - Interrupt Flag Status and Clear"]
    #[inline(always)]
    pub const fn intflag(&self) -> &Intflag {
        &self.intflag
    }
    #[doc = "0x20 - Status Register"]
    #[inline(always)]
    pub const fn status(&self) -> &Status {
        &self.status
    }
    #[doc = "0x30 - Instruction Address"]
    #[inline(always)]
    pub const fn instraddr(&self) -> &Instraddr {
        &self.instraddr
    }
    #[doc = "0x34 - Instruction Code"]
    #[inline(always)]
    pub const fn instrctrl(&self) -> &Instrctrl {
        &self.instrctrl
    }
    #[doc = "0x38 - Instruction Frame"]
    #[inline(always)]
    pub const fn instrframe(&self) -> &Instrframe {
        &self.instrframe
    }
    #[doc = "0x40 - Scrambling Mode"]
    #[inline(always)]
    pub const fn scrambctrl(&self) -> &Scrambctrl {
        &self.scrambctrl
    }
    #[doc = "0x44 - Scrambling Key"]
    #[inline(always)]
    pub const fn scrambkey(&self) -> &Scrambkey {
        &self.scrambkey
    }
}
#[doc = "CTRLA (rw) register accessor: Control A\n\nYou can [`read`](crate::Reg::read) this register and get [`ctrla::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctrla::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrla`]
module"]
#[doc(alias = "CTRLA")]
pub type Ctrla = crate::Reg<ctrla::CtrlaSpec>;
#[doc = "Control A"]
pub mod ctrla;
#[doc = "CTRLB (rw) register accessor: Control B\n\nYou can [`read`](crate::Reg::read) this register and get [`ctrlb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctrlb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrlb`]
module"]
#[doc(alias = "CTRLB")]
pub type Ctrlb = crate::Reg<ctrlb::CtrlbSpec>;
#[doc = "Control B"]
pub mod ctrlb;
#[doc = "BAUD (rw) register accessor: Baud Rate\n\nYou can [`read`](crate::Reg::read) this register and get [`baud::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`baud::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@baud`]
module"]
#[doc(alias = "BAUD")]
pub type Baud = crate::Reg<baud::BaudSpec>;
#[doc = "Baud Rate"]
pub mod baud;
#[doc = "RXDATA (r) register accessor: Receive Data\n\nYou can [`read`](crate::Reg::read) this register and get [`rxdata::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rxdata`]
module"]
#[doc(alias = "RXDATA")]
pub type Rxdata = crate::Reg<rxdata::RxdataSpec>;
#[doc = "Receive Data"]
pub mod rxdata;
#[doc = "TXDATA (w) register accessor: Transmit Data\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`txdata::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@txdata`]
module"]
#[doc(alias = "TXDATA")]
pub type Txdata = crate::Reg<txdata::TxdataSpec>;
#[doc = "Transmit Data"]
pub mod txdata;
#[doc = "INTENCLR (rw) register accessor: Interrupt Enable Clear\n\nYou can [`read`](crate::Reg::read) this register and get [`intenclr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`intenclr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intenclr`]
module"]
#[doc(alias = "INTENCLR")]
pub type Intenclr = crate::Reg<intenclr::IntenclrSpec>;
#[doc = "Interrupt Enable Clear"]
pub mod intenclr;
#[doc = "INTENSET (rw) register accessor: Interrupt Enable Set\n\nYou can [`read`](crate::Reg::read) this register and get [`intenset::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`intenset::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intenset`]
module"]
#[doc(alias = "INTENSET")]
pub type Intenset = crate::Reg<intenset::IntensetSpec>;
#[doc = "Interrupt Enable Set"]
pub mod intenset;
#[doc = "INTFLAG (rw) register accessor: Interrupt Flag Status and Clear\n\nYou can [`read`](crate::Reg::read) this register and get [`intflag::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`intflag::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intflag`]
module"]
#[doc(alias = "INTFLAG")]
pub type Intflag = crate::Reg<intflag::IntflagSpec>;
#[doc = "Interrupt Flag Status and Clear"]
pub mod intflag;
#[doc = "STATUS (r) register accessor: Status Register\n\nYou can [`read`](crate::Reg::read) this register and get [`status::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status`]
module"]
#[doc(alias = "STATUS")]
pub type Status = crate::Reg<status::StatusSpec>;
#[doc = "Status Register"]
pub mod status;
#[doc = "INSTRADDR (rw) register accessor: Instruction Address\n\nYou can [`read`](crate::Reg::read) this register and get [`instraddr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`instraddr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@instraddr`]
module"]
#[doc(alias = "INSTRADDR")]
pub type Instraddr = crate::Reg<instraddr::InstraddrSpec>;
#[doc = "Instruction Address"]
pub mod instraddr;
#[doc = "INSTRCTRL (rw) register accessor: Instruction Code\n\nYou can [`read`](crate::Reg::read) this register and get [`instrctrl::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`instrctrl::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@instrctrl`]
module"]
#[doc(alias = "INSTRCTRL")]
pub type Instrctrl = crate::Reg<instrctrl::InstrctrlSpec>;
#[doc = "Instruction Code"]
pub mod instrctrl;
#[doc = "INSTRFRAME (rw) register accessor: Instruction Frame\n\nYou can [`read`](crate::Reg::read) this register and get [`instrframe::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`instrframe::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@instrframe`]
module"]
#[doc(alias = "INSTRFRAME")]
pub type Instrframe = crate::Reg<instrframe::InstrframeSpec>;
#[doc = "Instruction Frame"]
pub mod instrframe;
#[doc = "SCRAMBCTRL (rw) register accessor: Scrambling Mode\n\nYou can [`read`](crate::Reg::read) this register and get [`scrambctrl::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`scrambctrl::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@scrambctrl`]
module"]
#[doc(alias = "SCRAMBCTRL")]
pub type Scrambctrl = crate::Reg<scrambctrl::ScrambctrlSpec>;
#[doc = "Scrambling Mode"]
pub mod scrambctrl;
#[doc = "SCRAMBKEY (w) register accessor: Scrambling Key\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`scrambkey::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@scrambkey`]
module"]
#[doc(alias = "SCRAMBKEY")]
pub type Scrambkey = crate::Reg<scrambkey::ScrambkeySpec>;
#[doc = "Scrambling Key"]
pub mod scrambkey;