/* * Copyright (c) 2020 Bitdefender * SPDX-License-Identifier: Apache-2.0 */ #ifndef BDX86_CORE_H #define BDX86_CORE_H #include "bddisasm_types.h" #include "bddisasm_status.h" #include "bddisasm_version.h" #include "bdx86_registers.h" #include "bdx86_constants.h" #include "bdx86_cpuidflags.h" #ifdef _MSC_VER #pragma warning(push) #pragma warning(disable: 4214) // Bitfield in type other than int. #pragma warning(disable: 4201) // Nonstandard extension used: nameless struct/union. #endif // // Preferred vendor; the disassembler will try to be smart and disassemble as much as it can, but if there are // encoding conflicts, than an alternate vendor can be selected. Note that this has effect only on conflicting // encodings. // #define ND_VEND_ANY 0 // Generic decode, include any vendor. #define ND_VEND_INTEL 1 // Prefer Intel. #define ND_VEND_AMD 2 // Prefer AMD. #define ND_VEND_MAX 2 // // These control what instructions should be decoded if they map onto the wide NOP space (0F 1A and 0F 1B). Those are // tricky, because they might be NOP if the feature is disabled, but might be something else (even #UD) if the feature // is enabled. Ergo, we allow the user to select whether said feature is on or off, so that he controls whether he // sees the NOPs or the MPX/CET/CLDEMOTE/etc. instructions instead. // #define ND_FEAT_NONE 0x00 // No feature/mode enabled. #define ND_FEAT_MPX 0x01 // MPX support enabled. #define ND_FEAT_CET 0x02 // CET support enabled. #define ND_FEAT_CLDEMOTE 0x04 // CLDEMOTE support enabled. #define ND_FEAT_PITI 0x08 // PREFETCHITI support enabled. #define ND_FEAT_APX 0x10 // APX support enabled. #define ND_FEAT_ALL 0xFF // Decode as if all features are enabled. This is default. // // Code type // #define ND_CODE_16 0 // 16 bit decode mode. #define ND_CODE_32 1 // 32 bit decode mode. #define ND_CODE_64 2 // 64 bit decode mode. // // Data type // #define ND_DATA_16 0 // 16 bit data size. #define ND_DATA_32 1 // 32 bit data size. #define ND_DATA_64 2 // 64 bit data size. // // Stack type // #define ND_STACK_16 0 // 16 bit stack size. #define ND_STACK_32 1 // 32 bit stack size. #define ND_STACK_64 2 // 64 bit stack size. // // Addressing mode // #define ND_ADDR_16 0 // 16 bit addressing. #define ND_ADDR_32 1 // 32 bit addressing. #define ND_ADDR_64 2 // 64 bit addressing. // // Operand mode/size // #define ND_OPSZ_16 0 // 16 bit operand size. #define ND_OPSZ_32 1 // 32 bit operand size. #define ND_OPSZ_64 2 // 64 bit operand size. // // Vector mode/size // #define ND_VECM_128 0 // 128 bit vector size. #define ND_VECM_256 1 // 256 bit vector size. #define ND_VECM_512 2 // 512 bit vector size. // // Encoding mode // #define ND_ENCM_LEGACY 0 // Legacy encoded instruction. #define ND_ENCM_XOP 1 // XOP encoded instruction. #define ND_ENCM_VEX 2 // VEX (bot 2B or 3B) encoded instruction. #define ND_ENCM_EVEX 3 // EVEX encoded instruction. // // VEX mode // #define ND_VEXM_2B 0 // 2B VEX prefix (0xC5). #define ND_VEXM_3B 1 // 3B VEX prefix (0xC4). // // EVEX mode // #define ND_EVEXM_EVEX 0 // Regular EVEX. #define ND_EVEXM_VEX 1 // EVEX extension for VEX instructions. #define ND_EVEXM_LEGACY 2 // EVEX extension for legacy instructions. #define ND_EVEXM_COND 3 // EVEX extension for conditional instructions. // // Size definitions // #define ND_SIZE_8BIT 1 // 1 byte. #define ND_SIZE_16BIT 2 // 1 word or 2 bytes. #define ND_SIZE_32BIT 4 // 1 double word or 4 bytes. #define ND_SIZE_48BIT 6 // 1 fword or 6 bytes. #define ND_SIZE_64BIT 8 // 1 qword or 8 bytes. #define ND_SIZE_80BIT 10 // 1 fpu word or 10 bytes. #define ND_SIZE_112BIT 14 // FPU environment, 14 bytes. #define ND_SIZE_128BIT 16 // 1 xmm word or 16 bytes. #define ND_SIZE_224BIT 28 // FPU environment, 28 bytes. #define ND_SIZE_256BIT 32 // 1 ymm word or 32 bytes. #define ND_SIZE_384BIT 48 // 48 bytes, used for Key Locker handles. #define ND_SIZE_512BIT 64 // 1 zmm word or 64 bytes. Used also for Key Locker handles. #define ND_SIZE_752BIT 94 // FPU state, 94 bytes. #define ND_SIZE_864BIT 108 // FPU state, 108 bytes. #define ND_SIZE_4096BIT 512 // Extended state, 512 bytes. #define ND_SIZE_1KB 1024 // Tile register, 1KB. #define ND_SIZE_CACHE_LINE 0xFFFFFFFE // The size of a cache line. #define ND_SIZE_UNKNOWN 0xFFFFFFFF // Unknown/invalid size. typedef ND_UINT32 ND_OPERAND_SIZE; typedef ND_UINT32 ND_REG_SIZE; // // Prefix definitions // #define ND_PREFIX_G0_LOCK 0xF0 // LOCK prefix. #define ND_PREFIX_G1_REPNE_REPNZ 0xF2 // REPNE/REPNZ prefix. #define ND_PREFIX_G1_XACQUIRE 0xF2 // XACQUIRE prefix. #define ND_PREFIX_G1_REPE_REPZ 0xF3 // REPE/REPZ prefix. #define ND_PREFIX_G1_XRELEASE 0xF3 // XRELEASE prefix. #define ND_PREFIX_G1_BND 0xF2 // BND prefix. #define ND_PREFIX_G2_SEG_CS 0x2E // CS segment override. #define ND_PREFIX_G2_SEG_SS 0x36 // SS segment override. #define ND_PREFIX_G2_SEG_DS 0x3E // DS segment override. #define ND_PREFIX_G2_SEG_ES 0x26 // ES segment override. #define ND_PREFIX_G2_SEG_FS 0x64 // FS segment override. #define ND_PREFIX_G2_SEG_GS 0x65 // GS segment override. #define ND_PREFIX_G2_BR_NOT_TAKEN 0x2E // Branch not taken hint. #define ND_PREFIX_G2_BR_TAKEN 0x3E // Branch taken hint. #define ND_PREFIX_G2_BR_ALT 0x64 // Alternating branch hint. #define ND_PREFIX_G2_NO_TRACK 0x3E // Do not track prefix. #define ND_PREFIX_G3_OPERAND_SIZE 0x66 // Operand size override. #define ND_PREFIX_G4_ADDR_SIZE 0x67 // Address size override. #define ND_PREFIX_REX_MIN 0x40 // First REX prefix. #define ND_PREFIX_REX_MAX 0x4F // Last REX prefix. #define ND_PREFIX_VEX_2B 0xC5 // 2B VEX prefix. #define ND_PREFIX_VEX_3B 0xC4 // 3B VEX prefix. #define ND_PREFIX_XOP 0x8F // XOP prefix. #define ND_PREFIX_EVEX 0x62 // EVEX prefix. #define ND_PREFIX_REX2 0xD5 // REX2 prefix. // // Instruction attributes // #define ND_FLAG_MODRM 0x0000000000000001 // The instruction has modrm. #define ND_FLAG_F64 0x0000000000000002 // The operand is forced to 64 bit. Size changing prefix 0x66 is ignored. #define ND_FLAG_D64 0x0000000000000004 // The default operand size is 64 bit. Size changing prefix 0x66 // changes the size to 16 bit. No 32 bit version can be encoded. #define ND_FLAG_O64 0x0000000000000008 // The instruction is available only in 64 bit mode. #define ND_FLAG_I64 0x0000000000000010 // The instruction is invalid in 64 bit mode. #define ND_FLAG_COND 0x0000000000000020 // The instruction has a condition code encoded in low 4 bits of the opcode. #define ND_FLAG_RESERVED0 0x0000000000000040 // Reserved. #define ND_FLAG_VSIB 0x0000000000000080 // The instruction uses VSIB addressing mode. #define ND_FLAG_MIB 0x0000000000000100 // The instruction used MIB addressing mode. #define ND_FLAG_LIG 0x0000000000000200 // L flag inside XOP/VEX/EVEX is ignored. #define ND_FLAG_WIG 0x0000000000000400 // W flag inside XOP/VEX/EVEX is ignored. #define ND_FLAG_3DNOW 0x0000000000000800 // The instruction is 3DNow!. The opcode is the last byte. #define ND_FLAG_LOCKSP 0x0000000000001000 // MOV to/from CR in 16/32 bit, on AMD, extend the access to // high 8 CRs via the LOCK prefix. #define ND_FLAG_LOCK_SPECIAL ND_FLAG_LOCKSP #define ND_FLAG_MMASK 0x0000000000002000 // The instruction #UDs if K0 (no mask) is used. #define ND_FLAG_NOMZ 0x0000000000004000 // The instruction #UDs if zeroing is used on memory. #define ND_FLAG_NOL0 0x0000000000008000 // The instruction #UDs if vector length 128 is used. #define ND_FLAG_NOA16 0x0000000000010000 // The instruction #UDs if 16-bit addressing is used. #define ND_FLAG_MFR 0x0000000000020000 // The Mod inside Mod R/M is forced to reg. No SIB/disp present. #define ND_FLAG_VECTOR 0x0000000000040000 // The instruction is a SIMD instruction that operates on vector regs. #define ND_FLAG_S66 0x0000000000080000 // Special flag for mandatory 0x66 prefix that actually changes // the default op length. #define ND_FLAG_BITBASE 0x0000000000100000 // The instruction uses bitbase addressing mode. #define ND_FLAG_AG 0x0000000000200000 // The instruction is an address generator; no actual memory access. #define ND_FLAG_SHS 0x0000000000400000 // The instruction does a shadow stack access. #define ND_FLAG_CETT 0x0000000000800000 // The instruction is CET tracked. #define ND_FLAG_SERIAL 0x0000000001000000 // The instruction is serializing. #define ND_FLAG_NORIPREL 0x0000000002000000 // The instruction #UDs if RIP-relative addressing is used. #define ND_FLAG_NO_RIP_REL ND_FLAG_NORIPREL #define ND_FLAG_NO66 0x0000000004000000 // The instruction #UDs if 0x66 prefix is present. #define ND_FLAG_SIBMEM 0x0000000008000000 // The instruction uses sibmem addressing (Intel AMX instructions). #define ND_FLAG_I67 0x0000000010000000 // Ignore the 0x67 prefix in 64 bit mode (Intel MPX instructions). #define ND_FLAG_IER 0x0000000020000000 // Ignore EVEX embedded rounding. #define ND_FLAG_IWO64 0x0000000040000000 // Ignore VEX/EVEX.W outside 64 bit mode. It behaves as if it's 0. #define ND_FLAG_NOREX2 0x0000000080000000 // The instruction #UDs if REX2 is present. #define ND_FLAG_NOREP 0x0000000100000000 // The instruction #UDs if REP prefixes are present. #define ND_FLAG_NO67 0x0000000200000000 // The instruction #UDs if 0x67 prefix is present. #define ND_FLAG_NOV 0x0000000400000000 // The instruction #UDs if XOP/VEX/EVEX.vvvv is not logical 0. #define ND_FLAG_NOVP 0x0000000800000000 // The instruction #UDs if EVEX.v' is not logical 0. #define ND_FLAG_SCALABLE 0x0000001000000000 // EVEX.pp can be 0 or 1, simulating the presence of 0x66 prefix. // // Accepted prefixes map // #define ND_PREF_REP 0x0001 // The instruction supports REP prefix. #define ND_PREF_REPC 0x0002 // The instruction supports REPZ/REPNZ prefixes. #define ND_PREF_LOCK 0x0004 // The instruction supports LOCK prefix. #define ND_PREF_HLE 0x0008 // The instruction supports XACQUIRE/XRELEASE prefixes. #define ND_PREF_XACQUIRE 0x0010 // The instruction supports only XACQUIRE. #define ND_PREF_XRELEASE 0x0020 // The instruction supports only XRELEASE. #define ND_PREF_BND 0x0040 // The instruction supports BND prefix. #define ND_PREF_BH 0x0080 // The instruction supports branch hints. #define ND_PREF_BHINT ND_PREF_BH #define ND_PREF_HLEWOL 0x0100 // HLE prefix is accepted without LOCK. #define ND_PREF_HLE_WO_LOCK ND_PREF_HLEWOL #define ND_PREF_DNT 0x0200 // The instruction supports the DNT (Do Not Track) CET prefix. // // Accepted decorators map. These are stored per-instruction. There are also per-operand indicators for // each decorator, where applicable. // #define ND_DECO_ER 0x01 // Embedded rounding is accepted. #define ND_DECO_SAE 0x02 // Suppress all Exceptions is accepted. #define ND_DECO_ZERO 0x04 // Zeroing is accepted. #define ND_DECO_MASK 0x08 // Masking is accepted. #define ND_DECO_BROADCAST 0x10 // Memory broadcast is accepted. #define ND_DECO_ND 0x20 // New-data destination specifier accepted. #define ND_DECO_NF 0x40 // No-Flags specifier accepted. #define ND_DECO_ZU 0x80 // Zero-Upper semantic accepted. // // Operand access flags. // #define ND_ACCESS_NONE 0x00 // The operand is not accessed. #define ND_ACCESS_READ 0x01 // The operand is read. #define ND_ACCESS_WRITE 0x02 // The operand is written. #define ND_ACCESS_COND_READ 0x04 // The operand is read only if some conditions are met. #define ND_ACCESS_COND_WRITE 0x08 // The operand is written only if some conditions are met (ie: CMOVcc). #define ND_ACCESS_ANY_READ (ND_ACCESS_READ | ND_ACCESS_COND_READ) // Any read mask. #define ND_ACCESS_ANY_WRITE (ND_ACCESS_WRITE | ND_ACCESS_COND_WRITE) // Any write mask. #define ND_ACCESS_PREFETCH 0x10 // The operand is prefetched. // // Condition definitions. // #define ND_COND_OVERFLOW 0x0 // OF #define ND_COND_CARRY 0x2 // CF #define ND_COND_BELOW 0x2 // CF #define ND_COND_NOT_ABOVE_OR_EQUAL 0x2 // CF #define ND_COND_ZERO 0x4 // ZF #define ND_COND_EQUAL 0x4 // ZF #define ND_COND_BELOW_OR_EQUAL 0x6 // CF | ZF #define ND_COND_NOT_ABOVE 0x6 // CF | ZF #define ND_COND_SIGN 0x8 // SF #define ND_COND_PARITY 0xA // PF #define ND_COND_LESS 0xC // SF ^ OF #define ND_COND_LESS_OR_EQUAL 0xE // (SF ^ OF) | ZF #define ND_COND_NOT(p) ((p) | 0x1) // Negates the predicate. // // Valid CPU modes. // // Group 1: ring #define ND_MOD_R0 0x00000001 // Instruction valid in ring 0. #define ND_MOD_R1 0x00000002 // Instruction valid in ring 1. #define ND_MOD_R2 0x00000004 // Instruction valid in ring 2. #define ND_MOD_R3 0x00000008 // Instruction valid in ring 3. // Group 2: operating mode. #define ND_MOD_REAL 0x00000010 // Instruction valid in real mode. #define ND_MOD_V8086 0x00000020 // Instruction valid in virtual 8086 mode. #define ND_MOD_PROT 0x00000040 // Instruction valid in protected mode. #define ND_MOD_COMPAT 0x00000080 // Instruction valid in compatibility mode. #define ND_MOD_LONG 0x00000100 // Instruction valid in long mode. // Group 3: misc modes. #define ND_MOD_SMM 0x00001000 // Instruction valid in System-Management Mode. #define ND_MOD_SMM_OFF 0x00002000 // Instruction valid outside SMM. #define ND_MOD_SGX 0x00004000 // Instruction valid in SGX enclaves. #define ND_MOD_SGX_OFF 0x00008000 // Instruction valid outside SGX enclaves. #define ND_MOD_TSX 0x00010000 // Instruction valid in TSX transactional regions. #define ND_MOD_TSX_OFF 0x00020000 // Instruction valid outside TSX. // Group 4: VMX #define ND_MOD_VMXR 0x00040000 // Instruction valid in VMX Root mode. #define ND_MOD_VMXN 0x00080000 // Instruction valid in VMX non-root mode. #define ND_MOD_VMXR_SEAM 0x00100000 // Instruction valid in VMX root Secure Arbitration Mode. #define ND_MOD_VMXN_SEAM 0x00200000 // Instruction valid in VMX non-root Secure Arbitration Mode. #define ND_MOD_VMX_OFF 0x00400000 // Instruction valid outside VMX operation. #define ND_MOD_RING_MASK 0x0000000F // Valid ring mask. #define ND_MOD_MODE_MASK 0x000001F0 // Valid mode mask. #define ND_MOD_OTHER_MASK 0x0003F000 // Misc mask. #define ND_MOD_VMX_MASK 0x007C0000 // VMX mask. // For instructions valid in any operating mode. #define ND_MOD_ANY 0xFFFFFFFF // Instruction valid in any mode. // // Misc constants // #define ND_MAX_INSTRUCTION_LENGTH 15 // 15 bytes is the maximum instruction length supported by the x86 arch. #define ND_MAX_MNEMONIC_LENGTH 32 // Should do for now. #define ND_MIN_BUF_SIZE 128 // Textual disassembly minimal buffer size. #define ND_MAX_OPERAND 10 // No more than 10 operands/instruction, but I'm generous. #define ND_MAX_REGISTER_SIZE 64 // Maximum register size - 64 bytes. #define ND_MAX_GPR_REGS 32 // Max number of GPRs. #define ND_MAX_SEG_REGS 8 // Max number of segment registers. #define ND_MAX_FPU_REGS 8 // Max number of FPU registers. #define ND_MAX_MMX_REGS 8 // Max number of MMX registers. #define ND_MAX_SSE_REGS 32 // Max number of SSE registers. #define ND_MAX_CR_REGS 32 // Max number of control registers. #define ND_MAX_DR_REGS 32 // Max number of debug registers. #define ND_MAX_TR_REGS 16 // Max number of test registers. #define ND_MAX_MSK_REGS 8 // Max number of mask registers. #define ND_MAX_BND_REGS 4 // Max number of bound registers. #define ND_MAX_SYS_REGS 8 // Max number of system registers. #define ND_MAX_X87_REGS 8 // Max number of x87 state/control registers registers. #define ND_MAX_TILE_REGS 8 // Max number of tile registers. // // Misc macros. // // Sign extend 8 bit to 64 bit. #define ND_SIGN_EX_8(x) (((x) & 0x00000080) ? (0xFFFFFFFFFFFFFF00 | (x)) : ((x) & 0xFF)) // Sign extend 16 bit to 64 bit. #define ND_SIGN_EX_16(x) (((x) & 0x00008000) ? (0xFFFFFFFFFFFF0000 | (x)) : ((x) & 0xFFFF)) // Sign extend 32 bit to 64 bit. #define ND_SIGN_EX_32(x) (((x) & 0x80000000) ? (0xFFFFFFFF00000000 | (x)) : ((x) & 0xFFFFFFFF)) // Wrapper for for ND_SIGN_EX_8/ND_SIGN_EX_16/ND_SIGN_EX_32. Sign extend sz bytes to 64 bits. #define ND_SIGN_EX(sz, x) ((sz) == 1 ? ND_SIGN_EX_8(x) : (sz) == 2 ? ND_SIGN_EX_16(x) : \ (sz) == 4 ? ND_SIGN_EX_32(x) : (x)) // Trim 64 bits to sz bytes. #define ND_TRIM(sz, x) ((sz) == 1 ? (x) & 0xFF : (sz) == 2 ? (x) & 0xFFFF : \ (sz) == 4 ? (x) & 0xFFFFFFFF : (x)) // Returns most significant bit, given size in bytes sz. #define ND_MSB(sz, x) ((sz) == 1 ? ((x) >> 7) & 1 : (sz) == 2 ? ((x) >> 15) & 1 : \ (sz) == 4 ? ((x) >> 31) & 1 : ((x) >> 63) & 1) // Returns least significant bit. #define ND_LSB(sz, x) ((x) & 1) // Convert a size in bytes to a bitmask. #define ND_SIZE_TO_MASK(sz) (((sz) < 8) ? ((1ULL << ((sz) * 8)) - 1) : (0xFFFFFFFFFFFFFFFF)) // Get bit at position bit from x. #define ND_GET_BIT(bit, x) (((x) >> (bit)) & 1) // Return the sign of sz bytes long value x. #define ND_GET_SIGN(sz, x) ND_MSB(sz, x) // Sets the sign of the sz bytes long value x. #define ND_SET_SIGN(sz, x) ND_SIGN_EX(sz, x) #ifdef BIG_ENDIAN #define ND_FETCH_64(b) ((ND_UINT64)ND_FETCH_32((char *)b) | ((ND_UINT64)ND_FETCH_32((char *)b + 4) << 32)) #define ND_FETCH_32(b) ((ND_UINT32)ND_FETCH_16((char *)b) | ((ND_UINT32)ND_FETCH_16((char *)b + 2) << 16)) #define ND_FETCH_16(b) ((((char *)b)[0]) | (((char *)b)[1] << 8)) #define ND_FETCH_8(b) (*((char *)b)) #else #define ND_FETCH_64(b) (*((ND_UINT64 *)(b))) #define ND_FETCH_32(b) (*((ND_UINT32 *)(b))) #define ND_FETCH_16(b) (*((ND_UINT16 *)(b))) #define ND_FETCH_8(b) (*((ND_UINT8 *)(b))) #endif // // Helper macros which simply test the presence of various ND_FLAG_* in the instruction attributes. // #define ND_IS_3DNOW(ix) (!!((ix)->Attributes & ND_FLAG_3DNOW)) #define ND_HAS_CONDITION(ix) (!!((ix)->Attributes & ND_FLAG_COND)) #define ND_HAS_MODRM(ix) (!!((ix)->Attributes & ND_FLAG_MODRM)) #define ND_HAS_VSIB(ix) (!!((ix)->Attributes & ND_FLAG_VSIB)) #define ND_HAS_MIB(ix) (!!((ix)->Attributes & ND_FLAG_MIB)) #define ND_HAS_VECTOR(ix) (!!((ix)->Attributes & ND_FLAG_VECTOR)) #define ND_HAS_BITBASE(ix) (!!((ix)->Attributes & ND_FLAG_BITBASE)) #define ND_HAS_AG(ix) (!!((ix)->Attributes & ND_FLAG_AG)) #define ND_HAS_SIBMEM(ix) (!!((ix)->Attributes & ND_FLAG_SIBMEM)) #define ND_HAS_SHS(ix) (!!((ix)->Attributes & ND_FLAG_SHS)) #define ND_HAS_CETT(ix) (!!((ix)->Attributes & ND_FLAG_CETT)) // // Supported prefixes macros. // #define ND_REP_SUPPORT(ix) (!!((ix)->ValidPrefixes.Rep)) #define ND_REPC_SUPPORT(ix) (!!((ix)->ValidPrefixes.RepCond)) #define ND_LOCK_SUPPORT(ix) (!!((ix)->ValidPrefixes.Lock)) #define ND_HLE_SUPPORT(ix) (!!((ix)->ValidPrefixes.Hle)) #define ND_XACQUIRE_SUPPORT(ix) (!!((ix)->ValidPrefixes.Xacquire)) #define ND_XRELEASE_SUPPORT(ix) (!!((ix)->ValidPrefixes.Xrelease)) #define ND_BND_SUPPORT(ix) (!!((ix)->ValidPrefixes.Bnd)) #define ND_BHINT_SUPPORT(ix) (!!((ix)->ValidPrefixes.Bhint)) #define ND_DNT_SUPPORT(ix) (!!((ix)->ValidPrefixes.Dnt)) // // Decorators map macros. // #define ND_DECORATOR_SUPPORT(ix) ((ix)->ValidDecorators.Raw != 0) #define ND_MASK_SUPPORT(ix) (!!((ix)->ValidDecorators.Mask)) #define ND_ZERO_SUPPORT(ix) (!!((ix)->ValidDecorators.Zero)) #define ND_ER_SUPPORT(ix) (!!((ix)->ValidDecorators.Er)) #define ND_SAE_SUPPORT(ix) (!!((ix)->ValidDecorators.Sae)) #define ND_BROADCAST_SUPPORT(ix) (!!((ix)->ValidDecorators.Broadcast)) // Generates a unique ID per register type, size and reg. The layout is the following: // - bits [63, 60] (4 bits) - the operand type (ND_OP_REG) // - bits [59, 52] (8 bits) - the register type // - bits [51, 36] (16 bits) - the register size, in bytes // - bits [35, 30] (6 bits) - the number of registers accessed starting with this reg (for block addressing) // - bits [29, 9] (21 bits) - reserved // - bit 8 - High8 indicator: indicates whether the reg is AH/CH/DH/BH // - bits [7, 0] (8 bits) - the register ID #define ND_OP_REG_ID(op) (((ND_UINT64)((op)->Type & 0xF) << 60) | \ ((ND_UINT64)((op)->Info.Register.Type & 0xFF) << 52) | \ ((ND_UINT64)((op)->Info.Register.Size & 0xFFFF) << 36) | \ ((ND_UINT64)((op)->Info.Register.Count & 0x3F) << 30) | \ ((ND_UINT64)((op)->Info.Register.IsHigh8 & 0x1) << 8) | \ ((ND_UINT64)((op)->Info.Register.Reg))) // Example: ND_IS_OP_REG(op, ND_REG_GPR, 4, REG_ESP) // Example: ND_IS_OP_REG(op, ND_REG_CR, 8, REG_CR3) // Example: ND_IS_OP_REG(op, ND_REG_RIP, 8, 0) // Checks if the indicated operand op is a register of type t, with size s and index r. #define ND_IS_OP_REG(op, t, s, r) (ND_OP_REG_ID(op) == (((ND_UINT64)(ND_OP_REG) << 60) | \ ((ND_UINT64)((t) & 0xFF) << 52) | \ ((ND_UINT64)((s) & 0xFFFF) << 36) | \ ((ND_UINT64)(1) << 30) | \ ((ND_UINT64)(r)))) // Checks if the indicated operand op is a register of type t, with size s and index r. #define ND_IS_OP_REG_EX(op, t, s, r, b, h) (ND_OP_REG_ID(op) == (((ND_UINT64)(ND_OP_REG) << 60) | \ ((ND_UINT64)((t) & 0xFF) << 52) | \ ((ND_UINT64)((s) & 0xFFFF) << 36) | \ ((ND_UINT64)((b) & 0x3F) << 30) | \ ((ND_UINT64)((h) & 0x1) << 8) | \ ((ND_UINT64)(r)))) // Checjs if the indicated operand is the stack. #define ND_IS_OP_STACK(op) ((op)->Type == ND_OP_MEM && (op)->Info.Memory.IsStack) // // Operand types. // typedef enum _ND_OPERAND_TYPE { ND_OP_NOT_PRESENT, // Indicates the absence of any operand. ND_OP_REG, // The operand is a register. ND_OP_MEM, // The operand is located in memory. ND_OP_IMM, // The operand is an immediate. ND_OP_OFFS, // The operand is a relative offset. ND_OP_ADDR, // The operand is an absolute far address, in the form seg:offset. ND_OP_ADDR_FAR = ND_OP_ADDR, ND_OP_ADDR_NEAR, // The operand is an absolute near address, in the form target64. ND_OP_CONST, // The operand is an implicit constant. ND_OP_BANK, // An entire bank/set of registers are being accessed. Used in PUSHA/POPA/XSAVE/LOADALL. ND_OP_DFV, // The operand is dfv (default flags value). } ND_OPERAND_TYPE; // // Register types. // typedef enum _ND_REG_TYPE { ND_REG_NOT_PRESENT, ND_REG_GPR, // The register is a 8/16/32/64 bit general purpose register. ND_REG_SEG, // The register is a segment register. ND_REG_FPU, // The register is a 80-bit FPU register. ND_REG_MMX, // The register is a 64-bit MMX register. ND_REG_SSE, // The register is a 128/256/512 bit SSE vector register. ND_REG_CR, // The register is a control register. ND_REG_DR, // The register is a debug register. ND_REG_TR, // The register is a test register. ND_REG_BND, // The register is a bound register. ND_REG_MSK, // The register is a mask register. ND_REG_TILE, // The register is a tile register. ND_REG_MSR, // The register is a model specific register. ND_REG_XCR, // The register is a extended control register. ND_REG_SYS, // The register is a system register. ND_REG_X87, // The register is a x87 status/control register. ND_REG_MXCSR, // The register is the MXCSR register. ND_REG_PKRU, // The register is the PKRU register. ND_REG_SSP, // The register is the SSP (Shadow Stack Pointer) register. ND_REG_FLG, // The register is the FLAGS register. ND_REG_RIP, // The register is the instruction pointer register. ND_REG_UIF, // The register is the User Interrupt Flag. } ND_REG_TYPE; // // Operand encoding types. // typedef enum _ND_OPERAND_ENCODING { ND_OPE_NP, // No encoding present. ND_OPE_R, // Operand encoded in modrm.reg. ND_OPE_M, // Operand encoded in modrm.rm. ND_OPE_V, // Operand encoded in Xop/Vex/Evex/Mvex.(v')vvvv ND_OPE_D, // Operand is encoded inside subsequent instruction bytes. ND_OPE_O, // Operand is encoded in low 3 bit of the opcode. ND_OPE_I, // Operand is an immediate. ND_OPE_C, // Operand is CL. ND_OPE_1, // Operand is 1. ND_OPE_L, // Operand is reg encoded in immediate. ND_OPE_A, // Operand is encoded in Evex.aaa. ND_OPE_E, // Operand is a MSR or XCR encoded in ECX register. ND_OPE_S, // Operand is implicit/suppressed. Not encoded anywhere. } ND_OPERAND_ENCODING; // // Instruction tuple type; used to determine compressed displacement size for disp8 EVEX instructions. Note that // most of the EVEX encoded instructions use the compressed displacement addressing scheme. // typedef enum _ND_TUPLE { ND_TUPLE_None, ND_TUPLE_FV, // Full Vector ND_TUPLE_HV, // Half Vector ND_TUPLE_QV, // Quarter Vector ND_TUPLE_T1S8, // Tuple1 scalar, size 8 bit ND_TUPLE_T1S16, // Tuple1 scalar, size 16 bit ND_TUPLE_T1S, // Tuple1 scalar, size 32/64 bit ND_TUPLE_T1F, // Tuple1 float, size 32/64 bit ND_TUPLE_T2, // Tuple2, 64/128 bit ND_TUPLE_T4, // Tuple4, 128/256 bit ND_TUPLE_T8, // Tuple8, 256 bit ND_TUPLE_FVM, // Full Vector Memory ND_TUPLE_HVM, // Half Vector Memory ND_TUPLE_QVM, // Quarter Vector Memory ND_TUPLE_OVM, // Oct Vector Memory ND_TUPLE_M128, // M128, 128 bit ND_TUPLE_DUP, // DUP (VMOVDDUP) ND_TUPLE_T1_4X, // 4 x 32 bit Memory Elements are referenced } ND_TUPLE; // // EVEX rounding control. // typedef enum _ND_ROUNDING { ND_RND_RNE, // Round to nearest equal. ND_RND_RD, // Round down. ND_RND_RU, // Round up. ND_RND_RZ, // round to zero. } ND_ROUNDING; // // Exception types. // typedef enum _ND_EX_TYPE { ND_EXT_None, // SSE/AVX exceptions. ND_EXT_1, ND_EXT_2, ND_EXT_3, ND_EXT_4, ND_EXT_5, ND_EXT_6, ND_EXT_7, ND_EXT_8, ND_EXT_9, ND_EXT_10, ND_EXT_11, ND_EXT_12, ND_EXT_13, ND_EXT_14, // Opmask exceptios. ND_EXT_K20, ND_EXT_K21, // EVEX exceptions. ND_EXT_E1, ND_EXT_E1NF, ND_EXT_E2, ND_EXT_E3, ND_EXT_E3NF, ND_EXT_E4, ND_EXT_E4S, // E4, with an additional case: if (dst == src1) or (dst == src2) ND_EXT_E4nb, ND_EXT_E4NF, ND_EXT_E4NFnb, ND_EXT_E5, ND_EXT_E5NF, ND_EXT_E6, ND_EXT_E6NF, ND_EXT_E7NM, ND_EXT_E9, ND_EXT_E9NF, ND_EXT_E10, ND_EXT_E10S, // E10, with an additional case: if (dst == src1) or (dst == src2) ND_EXT_E10NF, ND_EXT_E11, ND_EXT_E12, ND_EXT_E12NP, // AMX exceptions. ND_EXT_AMX_E1, ND_EXT_AMX_E2, ND_EXT_AMX_E3, ND_EXT_AMX_E4, ND_EXT_AMX_E5, ND_EXT_AMX_E6, // AMX-EVEX exceptions. ND_EXT_AMX_EVEX_E1, ND_EXT_AMX_EVEX_E2, ND_EXT_AMX_EVEX_E3, // APX-EVEX exceptions. ND_EXT_APX_EVEX_BMI, ND_EXT_APX_EVEX_CCMP, ND_EXT_APX_EVEX_WRSS, ND_EXT_APX_EVEX_WRUSS, ND_EXT_APX_EVEX_CFCMOV, ND_EXT_APX_EVEX_CMPCCXADD, ND_EXT_APX_EVEX_ENQCMD, ND_EXT_APX_EVEX_INT, ND_EXT_APX_EVEX_INVEPT, ND_EXT_APX_EVEX_INVPCID, ND_EXT_APX_EVEX_INVVPID, ND_EXT_APX_EVEX_KEYLOCKER, ND_EXT_APX_EVEX_KMOV, ND_EXT_APX_EVEX_PP2, ND_EXT_APX_EVEX_RAOINT, ND_EXT_APX_EVEX_SHA, ND_EXT_APX_EVEX_USER_MSR, } ND_EX_TYPE; // // Operand access mode. // typedef union _ND_OPERAND_ACCESS { ND_UINT8 Access; struct { ND_UINT8 Read : 1; // The operand is read. ND_UINT8 Write : 1; // The operand is written. ND_UINT8 CondRead : 1; // The operand is read only under some conditions. ND_UINT8 CondWrite : 1; // The operand is written only under some conditions. ND_UINT8 Prefetch : 1; // The operand is prefetched. }; } ND_OPERAND_ACCESS; // // Operand flags. // typedef union _ND_OPERAND_FLAGS { ND_UINT8 Flags; struct { ND_UINT8 IsDefault : 1; // 1 if the operand is default. This also applies to implicit ops. ND_UINT8 SignExtendedOp1 : 1; // 1 if the operand is sign extended to the first operands' size. ND_UINT8 SignExtendedDws : 1; // 1 if the operand is sign extended to the default word size. }; } ND_OPERAND_FLAGS; // // Constant operand. // typedef struct _ND_OPDESC_CONSTANT { ND_UINT64 Const; // Instruction constant, ie ROL reg, 1. } ND_OPDESC_CONSTANT; // // Immediate operand. // typedef struct _ND_OPDESC_IMMEDIATE { ND_UINT64 Imm; // Immediate. Only Size bytes are valid. The rest are undefined. ND_UINT8 RawSize; // Raw size (how many bytes are encoded in the instruction). } ND_OPDESC_IMMEDIATE; // // Relative offset operand. // typedef struct _ND_OPDESC_REL_OFFSET { ND_UINT64 Rel; // Relative offset (relative to the current RIP). Sign extended. ND_UINT8 RawSize; // Raw size (how many bytes are encoded in the instruction). } ND_OPDESC_RELOFFSET; // // Describes a register operand. Count registers are used starting with Reg. // typedef struct _ND_OPDESC_REGISTER { ND_REG_TYPE Type; // The register type. See enum ND_REG_TYPE. ND_REG_SIZE Size; // Indicates the register size. This may not be equal to the Size // field, as a smaller amount of data may be processed from a // register (especially if we have a SSE register or a mask register). // Also note that as of now, 64 bytes is the maximum register size. ND_UINT32 Reg; // The register number/ID. ND_UINT8 Count; // The number of registers accessed, starting with Reg. ND_UINT8 IsHigh8:1; // TRUE if this is AH, CH, DH or BH register. ND_UINT8 IsBlock:1; // TRUE if this is a block register addressing. ND_UINT8 IsZeroUpper:1; // TRUE if the upper register is zeroed. } ND_OPDESC_REGISTER; // // Describes a seg:offset absolute effective address. // typedef struct _ND_OPDESC_ADDRESS { // Size is the size of the address. Usually 4 (16 bit mode) or 6 (32 bit mode) or 10 (64 bit). ND_UINT64 Offset; // Offset inside the segment. ND_UINT16 BaseSeg; // Base segment selector of the address. } ND_OPDESC_ADDRESS, ND_OPDESC_ADDRESS_FAR; // // Describes a 64-bit absolute effective address. // typedef struct _ND_OPDESC_ADDRESS_NEAR { ND_UINT64 Target; // Absolue 64-bit target address. } ND_OPDESC_ADDRESS_NEAR; // // Shadow stack access types. // typedef enum _ND_SHSTK_ACCESS { ND_SHSTK_NONE = 0, ND_SHSTK_EXPLICIT, // Explicit memory operand accessed as shadow stack. ND_SHSTK_SSP_LD_ST, // Shadow Stack Pointer (SSP) used as base for addressing using conventional load/store. ND_SHSTK_SSP_PUSH_POP, // Shadow Stack Pointer (SSP) used as base for addressing using push/pop. ND_SHSTK_PL0_SSP, // Privilege 0 SSP (IA32_PL0_SSP) used (SETSSBSY). } ND_SHSTK_ACCESS; // // Describes a memory operand. // typedef struct _ND_OPDESC_MEMORY { ND_BOOL HasSeg:1; // TRUE if segment is present & used. ND_BOOL HasBase:1; // TRUE if base register is present. ND_BOOL HasIndex:1; // TRUE if index & scale are present. ND_BOOL HasDisp:1; // TRUE if displacement is present. ND_BOOL HasCompDisp:1; // TRUE if compressed disp8 is used (EVEX instructions). ND_BOOL HasBroadcast:1; // TRUE if the memory operand is a broadcast operand. ND_BOOL IsRipRel:1; // TRUE if this is a rip-relative addressing. Base, Index, Scale are // all ignored. ND_BOOL IsStack:1; // TRUE if this is a stack op. Note that explicit stack accesses are not // included (eg: mov eax, [rsp] will NOT set IsStack). ND_BOOL IsString:1; // TRUE for [RSI] and [RDI] operands inside string operations. ND_BOOL IsShadowStack:1; // TRUE if this is a shadow stack access. Check out ShStkType for more info. ND_BOOL IsDirect:1; // TRUE if direct addressing (MOV [...], EAX, 0xA3). ND_BOOL IsBitbase:1; // TRUE if this is a bit base. Used for BT* instructions. The bitbase // stored in the second operand must be added to the linear address. ND_BOOL IsAG:1; // TRUE if the memory operand is address generation and no mem access is // made. ND_BOOL IsMib:1; // TRUE if MIB addressing is used (MPX instructions). ND_BOOL IsVsib:1; // TRUE if the index register selects a vector register. ND_BOOL IsSibMem:1; // TRUE if the addressing uses sibmem (AMX instructions). ND_UINT8 BaseSize; // Base size, in bytes. Max 8 bytes. ND_UINT8 IndexSize; // Ditto for index size. Max 64 bytes for VSIB. ND_UINT8 DispSize; // Displacement size. Max 4 bytes. ND_UINT8 CompDispSize; // Compressed displacement size - 1, 2, 4, 8, 16, 32, 64. ND_UINT8 ShStkType; // Shadow stack access type. Check out ND_SHSTK_ACCESS. union { struct { ND_UINT8 IndexSize; // VSIB index size. ND_UINT8 ElemSize; // VSIB element size. ND_UINT8 ElemCount; // Number of elements scattered/gathered/prefetched. } Vsib; // Valid if HasVsib is set. struct { ND_UINT8 Count; // Number of times to broadcast the element. ND_UINT8 Size; // Size of one element. } Broadcast; // Valid if HasBroadcast is set. }; ND_UINT8 Seg:3; // Base segment used to address the memory. 0 = es, 1 = cs, etc. ND_UINT8 Base:5; // Base register. Can only be a GPR. ND_UINT8 Index; // Index register. Can be a vector reg (ZMM0-ZMM31). ND_UINT8 Scale:4; // Scale: 1, 2, 4 or 8. Always present if Index is present. ND_UINT64 Disp; // Sign extended displacement. } ND_OPDESC_MEMORY; // // Describes a Default Flags Value operand. // typedef struct _ND_OPDESC_DEFAULT_FLAGS { ND_UINT8 CF:1; ND_UINT8 ZF:1; ND_UINT8 SF:1; ND_UINT8 OF:1; } ND_OPDESC_DEFAULT_FLAGS; // // Describes a decorator that applies to an operand. // typedef struct _ND_OPERAND_DECORATOR { ND_BOOL HasMask:1; // TRUE if mask is present, 0 otherwise. ND_BOOL HasZero:1; // TRUE if zeroing will be made, 0 if merging will be made. ND_BOOL HasBroadcast:1; // TRUE if broadcasting is being made. Valid only for memory operands. // Mask register specifier. ND_UINT8 Msk:3; // Mask register used. Only k0-k7 can be encoded. } ND_OPERAND_DECORATOR; // // Extended operand information. // typedef struct _ND_OPERAND { ND_UINT8 Type:4; // Operand type. One of ND_OPERAND_TYPE enumerations. ND_UINT8 Encoding:4; // Where is the operand encoded. One of ND_OPERAND_ENCODING enumerations. ND_OPERAND_ACCESS Access; // Access mode (read, write, read-write, etc.) ND_OPERAND_FLAGS Flags; // Misc operand flags. ND_OPERAND_DECORATOR Decorator; // Decorator information. ND_OPERAND_SIZE Size; // Operand size in bytes. This should be used when operating with // the operand. It includes sign-extension or zero-extensions. // Note that the Size field indicates the actual amount of data // used for processing. If the operand type is a register, it MAY NOT // indicate the register size. Use the Info.Register.Size // field to get the actual register size. // Depending in the Type field, one of these subfields contains information about the operand. // Althoug Immediate, RelativeOffset & Address are all immediate payloads, they are kept separate, due // the slightly different semantic: // 1. Immediate is a plain immediate quantity // 2. RelativeOffset is an immediate added to the instruction pointer // 3. Address is an mmediate formed formed of a segment:offset pair union { ND_OPDESC_REGISTER Register; // Register, if operand type if ND_OP_REG. ND_OPDESC_MEMORY Memory; // Memory, if operand type is ND_OP_MEM. ND_OPDESC_IMMEDIATE Immediate; // Immediate, if operand type is ND_OP_IMM. ND_OPDESC_RELOFFSET RelativeOffset; // Relative offset, if operand type is ND_OP_REL_OFFS. ND_OPDESC_ADDRESS_FAR Address; // Address, seg:offset form, if operand type is ND_OP_ADDR. ND_OPDESC_ADDRESS_NEAR AddressNear; // Address, target64 form, if operand type is ND_OP_ADDR_NEAR. ND_OPDESC_CONSTANT Constant; // Constant, if operand type is ND_OP_CONST. ND_OPDESC_DEFAULT_FLAGS DefaultFlags; // Default flags value, if operand type is ND_OP_DFV. } Info; } ND_OPERAND, *PND_OPERAND; // // REX prefix. // typedef union _ND_REX { ND_UINT8 Rex; struct { ND_UINT8 b : 1; // b (rm or low opcode) extension field. ND_UINT8 x : 1; // x (index) extension field. ND_UINT8 r : 1; // r (reg) extension field. ND_UINT8 w : 1; // w (size) extension field. Promotes to 64 bit. }; } ND_REX; // // REX2 prefix. // typedef union _ND_REX2 { ND_UINT8 Rex2[2]; struct { ND_UINT8 op; // 0xD5 ND_UINT8 b3 : 1; // B3 (rm or low opcode) extension field. ND_UINT8 x3 : 1; // X3 (index) extension field. ND_UINT8 r3 : 1; // R3 (reg) extension field. ND_UINT8 w : 1; // W (size) extension field. Promotes to 64 bit. ND_UINT8 b4 : 1; // B4 (rm or low opcode) extension field. ND_UINT8 x4 : 1; // X4 (index) extension field. ND_UINT8 r4 : 1; // R4 (reg) extension field. ND_UINT8 m0 : 1; // M0 map ID. }; } ND_REX2; // // Mod R/M byte. // typedef union _ND_MODRM { ND_UINT8 ModRm; struct { ND_UINT8 rm : 3; // rm field. ND_UINT8 reg : 3; // reg field. ND_UINT8 mod : 2; // mod field. Indicates memory access (0, 1 or 2), or register access (3). }; } ND_MODRM; // // SIB byte. // typedef union _ND_SIB { ND_UINT8 Sib; struct { ND_UINT8 base : 3; // Base register. ND_UINT8 index : 3; // Index register. ND_UINT8 scale : 2; // Scale. }; } ND_SIB; // // 2-bytes VEX. Exactly as Intel defined it. // typedef union _ND_VEX2 { ND_UINT8 Vex[2]; struct { ND_UINT8 op; // 0xC5 ND_UINT8 p : 2; // p0, p1 ND_UINT8 l : 1; // L ND_UINT8 v : 4; // ~v0, ~v1, ~v2, ~v3 ND_UINT8 r : 1; // ~R }; } ND_VEX2; // // 3-bytes VEX. Exactly as Intel defined it. // typedef union _ND_VEX3 { ND_UINT8 Vex[3]; struct { ND_UINT8 op; // 0xC4 ND_UINT8 m : 5; // m0, m1, m2, m3, m4 ND_UINT8 b : 1; // ~B ND_UINT8 x : 1; // ~X ND_UINT8 r : 1; // ~R ND_UINT8 p : 2; // p0, p1 ND_UINT8 l : 1; // L ND_UINT8 v : 4; // ~v0, ~v1, ~v2, ~v3 ND_UINT8 w : 1; // W }; } ND_VEX3; // // XOP. Exactly as AMD defined it. // typedef union _ND_XOP { ND_UINT8 Xop[3]; struct { ND_UINT8 op; // 0x8F ND_UINT8 m : 5; // m0, m1, m2, m3, m4 ND_UINT8 b : 1; // ~B ND_UINT8 x : 1; // ~X ND_UINT8 r : 1; // ~R ND_UINT8 p : 2; // p0, p1 ND_UINT8 l : 1; // L ND_UINT8 v : 4; // ~v0, ~v1, ~v2, ~v3 ND_UINT8 w : 1; // W }; } ND_XOP; // // EVEX prefix. Exactly as Intel defined it. // typedef union _ND_EVEX { ND_UINT8 Evex[4]; struct { ND_UINT8 op; // 0x62 ND_UINT8 m : 3; // m0, m1, m2. Indicates opcode map. ND_UINT8 b4 : 1; // B4 (repurposed from a hard-coded 0 bit). ND_UINT8 rp : 1; // ~R' or ~R4 ND_UINT8 b : 1; // ~B or ~B3 ND_UINT8 x : 1; // ~X or ~X3 ND_UINT8 r : 1; // ~R or ~R3 ND_UINT8 p : 2; // p0, p1 ND_UINT8 x4 : 1; // ~X4 (repurposed from a hard-coded 1 bit). ND_UINT8 v : 4; // ~v0, ~v1, ~v2, ~v3 ND_UINT8 w : 1; // W ND_UINT8 a : 3; // a0, a1, a2 ND_UINT8 vp : 1; // ~V' ND_UINT8 bm : 1; // b ND_UINT8 l : 2; // L'L ND_UINT8 z : 1; // z }; } ND_EVEX; // // Describes the CPUID leaf, sub-leaf, register & bit that indicate whether an instruction is supported or not. // If Leaf == ND_CFF_NO_LEAF, the instruction is supported on any CPU, and no CPUID flag exists. // If SubLeaf == ND_CFF_NO_SUBLEAF, there is no subleaf to check. // typedef union _ND_CPUID_FLAG { ND_UINT64 Flag; struct { ND_UINT32 Leaf; // CPUID leaf. ND_CFF_NO_LEAF if not applicable. ND_UINT32 SubLeaf : 24; // CPUID sub-leaf. ND_CFF_NO_SUBLEAF if not applicable. ND_UINT32 Reg : 3; // The register that contains info regarding the instruction. ND_UINT32 Bit : 5; // Bit inside the register that indicates whether the instruction is present. }; } ND_CPUID_FLAG; // // Each instruction may accept one or more prefixes. This structure indicates which prefixes are valid for the // given instruction. // typedef union _ND_VALID_PREFIXES { ND_UINT16 Raw; struct { ND_UINT16 Rep : 1; // The instruction supports REP prefix. ND_UINT16 RepCond : 1; // The instruction supports REPZ/REPNZ prefixes. ND_UINT16 Lock : 1; // The instruction supports LOCK prefix. ND_UINT16 Hle : 1; // The instruction supports XACQUIRE/XRELEASE prefixes. ND_UINT16 Xacquire : 1; // The instruction supports only XACQUIRE. ND_UINT16 Xrelease : 1; // The instruction supports only XRELEASE. ND_UINT16 Bnd : 1; // The instruction supports BND prefix. ND_UINT16 Bhint : 1; // The instruction supports branch hints. ND_UINT16 HleNoLock : 1; // HLE prefix is accepted without LOCK. ND_UINT16 Dnt : 1; // The instruction supports the DNT (Do Not Track) CET prefix. }; } ND_VALID_PREFIXES, *PND_VALID_PREFIXES; // // Each instruction may accept several decorators. This instruction indicates which decorators are valid for the // given instruction. // typedef union _ND_VALID_DECORATORS { ND_UINT8 Raw; struct { ND_UINT8 Er : 1; // The instruction supports embedded rounding mode. ND_UINT8 Sae : 1; // The instruction supports suppress all exceptions mode. ND_UINT8 Zero : 1; // The instruction supports zeroing. ND_UINT8 Mask : 1; // The instruction supports mask registers. ND_UINT8 Broadcast : 1; // The instruction supports broadcast. ND_UINT8 Nd : 1; // The instruction supports new data destination. ND_UINT8 Nf : 1; // The instruction supports no-flags update. ND_UINT8 Zu : 1; // The instruction supports zero-upper semantic. }; } ND_VALID_DECORATORS, *PND_VALID_DECORATORS; // // Each instruction is valid or invalid in any certain mode. This indicates which modes the instruction is valid in. // If the bit is set, the isntruction is valid in that given mode. // typedef union _ND_VALID_MODES { ND_UINT32 Raw; struct { // Group 1: privilege level. ND_UINT32 Ring0 : 1; // The instruction is valid in ring 0. ND_UINT32 Ring1 : 1; // The instruction is valid in ring 1. ND_UINT32 Ring2 : 1; // The instruction is valid in ring 2. ND_UINT32 Ring3 : 1; // The instruction is valid in ring 3. // Group 2: operating mode - the CPU can be on only one of these modes at any moment. ND_UINT32 Real : 1; // The instruction is valid in real mode. ND_UINT32 V8086 : 1; // The instruction is valid in Virtual 8086 mode. ND_UINT32 Protected : 1; // The instruction is valid in protected mode (32 bit). ND_UINT32 Compat : 1; // The instruction is valid in compatibility mode (32 bit in 64 bit). ND_UINT32 Long : 1; // The instruction is valid in long mode. ND_UINT32 Reserved : 3; // Reserved for padding/future use. // Group 3: special modes - these may be active inside other modes (example: TSX in Long mode). ND_UINT32 Smm : 1; // The instruction is valid in System Management Mode. ND_UINT32 SmmOff : 1; // The instruction is valid outside SMM. ND_UINT32 Sgx : 1; // The instruction is valid in SGX mode. ND_UINT32 SgxOff : 1; // The instruction is valid outside SGX. ND_UINT32 Tsx : 1; // The instruction is valid in transactional regions. ND_UINT32 TsxOff : 1; // The instruction is valid outside TSX. // Group 4: VMX mode - they engulf all the other modes. ND_UINT32 VmxRoot : 1; // The instruction is valid in VMX root mode. ND_UINT32 VmxNonRoot : 1;// The instruction is valid in VMX non root mode. ND_UINT32 VmxRootSeam : 1; // The instruction is valid in VMX root SEAM. ND_UINT32 VmxNonRootSeam : 1;// The instruction is valid in VMX non-root SEAM. ND_UINT32 VmxOff : 1; // The instruction is valid outside VMX operation. }; } ND_VALID_MODES, *PND_VALID_MODES; // // RFLAGS register. This structure reflects the actual position of each flag insdide the RFLAGS register, so it can // be used for direct processing. // typedef union _ND_RFLAGS { ND_UINT32 Raw; struct { ND_UINT32 CF : 1; // Carry flag. ND_UINT32 Reserved1 : 1; // Reserved, must be 1. ND_UINT32 PF : 1; // Parity flag. ND_UINT32 Reserved2 : 1; // Reserved. ND_UINT32 AF : 1; // Auxiliary flag. ND_UINT32 Reserved3 : 1; // Reserved. ND_UINT32 ZF : 1; // Zero flag. ND_UINT32 SF : 1; // Sign flag. ND_UINT32 TF : 1; // Trap flag. ND_UINT32 IF : 1; // Interrupt flag. ND_UINT32 DF : 1; // Direction flag. ND_UINT32 OF : 1; // Overflow flag. ND_UINT32 IOPL : 2; // I/O privilege level flag. ND_UINT32 NT : 1; // Nested task flag. ND_UINT32 Reserved4 : 1; // Reserved. ND_UINT32 RF : 1; // Resume flag. ND_UINT32 VM : 1; // Virtual mode flag. ND_UINT32 AC : 1; // Alignment check flag. ND_UINT32 VIF : 1; // Virtual interrupts flag. ND_UINT32 VIP : 1; // Virtual interrupt pending flag. ND_UINT32 ID : 1; // CPUID identification flag. }; } ND_RFLAGS, *PND_RFLAGS; #define ND_FPU_FLAG_SET_0 0 // The FPU status flag is cleared to 0. #define ND_FPU_FLAG_SET_1 1 // The FPU status flag is set to 1. #define ND_FPU_FLAG_MODIFIED 2 // The FPU status flag is modified according to a result. #define ND_FPU_FLAG_UNDEFINED 3 // The FPU status flag is undefined or unaffected. // // FPU status flags. Each status flag can be one of ND_FPU_FLAG*. // typedef struct _ND_FPU_FLAGS { ND_UINT8 C0 : 2; // C0 flag access mode. See ND_FPU_FLAG_*. ND_UINT8 C1 : 2; // C1 flag access mode. See ND_FPU_FLAG_*. ND_UINT8 C2 : 2; // C2 flag access mode. See ND_FPU_FLAG_*. ND_UINT8 C3 : 2; // C3 flag access mode. See ND_FPU_FLAG_*. } ND_FPU_FLAGS, *PND_FPU_FLAGS; // // Branch information. // typedef struct _ND_BRANCH_INFO { ND_UINT8 IsBranch : 1; ND_UINT8 IsConditional : 1; ND_UINT8 IsIndirect : 1; ND_UINT8 IsFar : 1; } ND_BRANCH_INFO; // // Describes a decoded instruction. All the possible information about the instruction is contained in this structure. // You don't have to call any other APIs to gather any more info about it. // typedef struct _INSTRUX { ND_UINT8 DefCode:2; // ND_CODE_*. Indicates disassembly mode. ND_UINT8 DefData:2; // ND_DATA_*. Indicates default data size. ND_UINT8 DefStack:2; // ND_STACK_*. Indicates default stack pointer width. ND_UINT8 AddrMode:2; // ND_ADDR_*. Indicates addressing mode. ND_UINT8 OpMode:2; // ND_OPSZ_*. Indicates operand mode/size. ND_UINT8 EfOpMode:2; // ND_OPSZ_*. Indicates effective operand mode/size. ND_UINT8 VecMode:2; // ND_VECM_*. Indicates vector length. Valid only for vector instructions. ND_UINT8 EfVecMode:2; // ND_VECM_*. Indicates effective vector length. Valid only for vector instructions. ND_UINT8 EncMode:4; // ND_ENCM_*. Indicates encoding mode. ND_UINT8 VexMode:2; // ND_VEX_*. Indicates the VEX mode, if any. Valid only if HasVex set. ND_UINT8 EvexMode:4; // ND_EVEX_*. Indicates EVEX extension, if any. Valid only if HasEvex set. ND_UINT8 VendMode:4; // ND_VEND_*. Indicates vendor mode. ND_UINT8 FeatMode; // ND_FEAT_*. Indicates which features are enabled. // Present prefixes. Note that even if a prefix is marked as being present in the encoding, it does not necessary mean // that the prefix is actually used. Check Is*Enabled fields to check if the prefix is enabled & used. In some cases, // prefixes are ignored, even if present. ND_BOOL HasRex:1; // TRUE - REX is present. ND_BOOL HasRex2:1; // TRUE - REX2 is present. ND_BOOL HasVex:1; // TRUE - VEX is present. ND_BOOL HasXop:1; // TRUE - XOP is present. ND_BOOL HasEvex:1; // TRUE - EVEX is present. ND_BOOL HasOpSize:1; // TRUE - 0x66 present. ND_BOOL HasAddrSize:1; // TRUE - 0x67 present. ND_BOOL HasLock:1; // TRUE - 0xF0 present. ND_BOOL HasRepnzXacquireBnd:1; // TRUE - 0xF2 present. ND_BOOL HasRepRepzXrelease:1; // TRUE - 0xF3 present. ND_BOOL HasSeg:1; // TRUE - segment override present. // Present encoding components. ND_BOOL HasModRm:1; // TRUE - we have valid MODRM. ND_BOOL HasSib:1; // TRUE - we have valid SIB. ND_BOOL HasDisp:1; // TRUE - the instruction has displacement. ND_BOOL HasAddr:1; // TRUE - the instruction contains a direct far address (ie, CALL far 0x9A) ND_BOOL HasAddrNear:1; // TRUE - the instruction contains a direct near address (ie, CALL far 0x9A) ND_BOOL HasMoffset:1; // TRUE - the instruction contains a moffset (ie, MOV al, [mem], 0xA0) ND_BOOL HasRelOffs:1; // TRUE - the instruction contains a relative offset (ie, Jcc 0x7x). ND_BOOL HasImm1:1; // TRUE - immediate present. ND_BOOL HasImm2:1; // TRUE - second immediate present. ND_BOOL HasSseImm:1; // TRUE - SSE immediate that encodes additional registers is present. // Present decorators & EVEX info. ND_BOOL HasCompDisp:1; // TRUE - the instruction uses compressed displacement. ND_BOOL HasBroadcast:1; // TRUE - the instruction uses broadcast addressing. ND_BOOL HasMask:1; // TRUE - the instruction has mask. ND_BOOL HasZero:1; // TRUE - the instruction uses zeroing. ND_BOOL HasEr:1; // TRUE - the instruction has embedded rounding. ND_BOOL HasSae:1; // TRUE - the instruction has SAE. ND_BOOL HasNd:1; // TRUE - the instruction uses New-Data Destination. ND_BOOL HasNf:1; // TRUE - the instruction uses NoFlags update. ND_BOOL HasZu:1; // TRUE - the instruction has ZeroUpper. ND_BOOL HasIgnEr:1; // TRUE - the instruction ignores embedded rounding. // Mandatory prefixes. ND_BOOL HasMandatory66:1; // 0x66 is mandatory prefix. Does not behave as size-changing prefix. ND_BOOL HasMandatoryF2:1; // 0x66 is mandatory prefix. Does not behave as REP prefix. ND_BOOL HasMandatoryF3:1; // 0x66 is mandatory prefix. Does not behave as REP prefix. // Prefix activation. Use these fields to check whether a prefix is present & active for the instruction. ND_BOOL IsLockEnabled:1; // TRUE - LOCK is present & used. ND_BOOL IsRepEnabled:1; // TRUE - REP is present & used. ND_BOOL IsRepcEnabled:1; // TRUE - REPZ/REPNZ is present & used. ND_BOOL IsXacquireEnabled:1; // TRUE - the instruction is XACQUIRE enabled. ND_BOOL IsXreleaseEnabled:1; // TRUE - the instruction is XRELEASE enabled. ND_BOOL IsBhintEnabled:1; // TRUE - branch hints valid & used. ND_BOOL IsBndEnabled:1; // TRUE - BND prefix valid & used. ND_BOOL IsDntEnabled:1; // TRUE - DNT prefix valid & used. ND_BOOL IsRepeated:1; // TRUE - the instruction is REPed up to RCX times. ND_BOOL IsCetTracked:1; // TRUE - this is an indirect CALL/JMP that is CET tracked. // Misc. ND_UINT8 IsRipRelative:1; // TRUE - the instruction uses RIP relative addressing. ND_UINT8 RoundingMode:2; // EVEX rounding mode, if present. One of ND_ROUNDING. // Instruction components lengths. Will be 0 if the given field is not present. ND_UINT8 Length; // 1-15 valid. Instructions longer than 15 bytes will cause #GP. ND_UINT8 WordLength:4; // The length of the instruction word. 2, 4 or 8. ND_UINT8 StackWords:4; // Number of words accessed on/from the stack. 0-15. ND_UINT8 PrefLength:4; // The total number of bytes consumed by prefixes. This will also be // the offset to the first opcode. The primary opcode will always be // the last one, so at offset PrefixesLength + OpcodeLength - 1 ND_UINT8 OpLength:4; // Number of opcode bytes. Max 3. ND_UINT8 DispLength:4; // Displacement length, in bytes. Maximum 4. ND_UINT8 AddrLength:4; // Absolute address length, in bytes. Maximum 8 bytes. ND_UINT8 MoffsetLength:4; // Memory offset length, in bytes. Maximum 8 bytes. ND_UINT8 Imm1Length:4; // First immediate length, in bytes. Maximum 8 bytes. ND_UINT8 Imm2Length:4; // Second immediate length, in bytes. Maximum 1 byte. ND_UINT8 RelOffsLength:4; // Relative offset length, in bytes. Maximum 4 bytes. // Instruction components offsets. Will be 0 if the given field is not present. Prefixes ALWAYS start at offset 0. ND_UINT8 OpOffset:4; // The offset of the first opcode, inside the instruction. ND_UINT8 MainOpOffset:4; // The offset of the nominal opcode, inside the instruction. ND_UINT8 DispOffset:4; // The offset of the displacement, inside the instruction ND_UINT8 AddrOffset:4; // The offset of the hard-coded address. ND_UINT8 MoffsetOffset:4; // The offset of the absolute address, inside the instruction ND_UINT8 Imm1Offset:4; // The offset of the immediate, inside the instruction ND_UINT8 Imm2Offset:4; // The offset of the second immediate, if any, inside the instruction ND_UINT8 RelOffsOffset:4; // The offset of the relative offset used in instruction. ND_UINT8 SseImmOffset:4; // The offset of the SSE immediate, if any, inside the instruction. ND_UINT8 ModRmOffset:4; // The offset of the mod rm byte inside the instruction, if any. // If SIB is also present, it will always be at ModRmOffset + 1. // This structures contains the fields extracted from either REX, REX2, XOP, VEX, or EVEX fields. // They're globally placed here, in order to avoid testing for each kind of prefix each time. // Instead, one can use the different fields directly from here, regardless the actual encoding mode. struct { ND_UINT32 w:1; // REX/REX2/XOP/VEX/EVEX.W ND_UINT32 r:1; // REX/REX2/XOP/VEX/EVEX.R3 (reg extension) ND_UINT32 x:1; // REX/REX2/XOP/VEX/EVEX.X3 (index extension) ND_UINT32 b:1; // REX/REX2/XOP/VEX/EVEX.B3 (base extension) ND_UINT32 rp:1; // REX2/EVEX.R4 (reg extension, previously known as R') ND_UINT32 x4:1; // REX2/EVEX.X4 (index extension) ND_UINT32 b4:1; // REX2/EVEX.B4 (base extension) ND_UINT32 p:2; // XOP/VEX/EVEX.pp (embedded prefix) ND_UINT32 m:5; // XOP/VEX/EVEX.mmmmm (decoding table) ND_UINT32 l:2; // XOP/VEX.L or EVEX.L'L (vector length) ND_UINT32 v:4; // XOP/VEX/EVEX.VVVV (additional operand) ND_UINT32 vp:1; // EVEX.V4 (vvvv extension, previously known as V') ND_UINT32 bm:1; // EVEX.b (embedded broadcast) ND_UINT32 z:1; // EVEX.z (zero) ND_UINT32 k:3; // EVEX.aaa (mask registers) ND_UINT32 nd:1; // EVEX.ND (new data destination) ND_UINT32 nf:1; // EVEX.NF (no-flags) ND_UINT32 sc:4; // EVEX.SC0,SC1,SC2,SC3 (standard condition). } Exs; // Raw instruction components. ND_UINT8 Rep; // The last rep/repz/repnz prefix. 0 if none. ND_UINT8 Seg; // The last segment override prefix. 0 if none. FS/GS if 64 bit. ND_MODRM ModRm; // ModRM byte. ND_SIB Sib; // SIB byte. union { ND_REX Rex; // REX prefix. ND_REX2 Rex2; // REX2 prefix. ND_VEX2 Vex2; // VEX 2 prefix. ND_VEX3 Vex3; // VEX 3 prefix. ND_XOP Xop; // XOP prefix. ND_EVEX Evex; // EVEX prefix. }; // An Address, Moffset, Displacement or RelativeOffset cannot be present at the same time. union { ND_UINT32 Displacement; // Displacement. Max 4 bytes. Used in ModRM instructions. ND_UINT32 RelativeOffset; // Relative offset, used for branches. Max 4 bytes. ND_UINT64 Moffset; // Offset. Used by 'O' operands. It's an absolute address. ND_UINT64 AddressNear; // target64 near address. struct { ND_UINT32 Ip; ND_UINT16 Cs; } Address; // seg:offset far address. }; ND_UINT64 Immediate1; // Can be 8 bytes on x64. union { ND_UINT8 Immediate2; // For enter, mainly. Can only be 1 byte. ND_UINT8 SseImmediate; // This immediate actually selects a register. }; ND_UINT8 OperandsCount:4; // Number of operands (total). ND_UINT8 ExpOperandsCount:4; // Number of explicit operands. Use this if you want to ignore // implicit operands such as stack, flags, etc. ND_OPERAND Operands[ND_MAX_OPERAND]; // Instruction operands. // EVEX information. ND_UINT8 ExceptionType; // Exception type. One of ND_EX_TYPE. ND_UINT8 TupleType; // EVEX tuple type, if EVEX. One of ND_TUPLE. // As extracted from the operands themselves. ND_UINT8 CsAccess; // CS access mode (read/write). Includes only implicit CS accesses. ND_UINT8 RipAccess; // RIP access mode (read/write). ND_UINT8 RflAccess; // RFLAGS access mode (read/write), as per the entire register. ND_UINT8 StackAccess; // Stack access mode (push/pop). ND_UINT8 MemoryAccess; // Memory access mode (read/write, including stack or shadow stack). ND_FPU_FLAGS FpuFlagsAccess; // FPU status word C0-C3 bits access. Valid only for FPU instructions! ND_BRANCH_INFO BranchInfo; // Branch information. struct { ND_RFLAGS Tested; // Tested flags. ND_RFLAGS Modified; // Modified (according to the result) flags. ND_RFLAGS Set; // Flags that are always set to 1. ND_RFLAGS Cleared; // Flags that are always cleared to 0. ND_RFLAGS Undefined; // Undefined flags. } FlagsAccess; // Stored inside the instruction entry as well. These are specific for an instruction and do not depend on // encoding. Use the flags definitions (ND_FLAG_*, ND_PREF_*, ND_DECO_*, ND_EXOP_*) to access specific bits. ND_UINT64 Attributes; // Instruction attributes/flags. A collection of ND_FLAG_*. // Instruction metadata. ND_INS_CLASS Instruction; // One of the ND_INS_* ND_INS_CATEGORY Category; // One of the ND_CAT_* ND_INS_SET IsaSet; // One of the ND_SET_* ND_CPUID_FLAG CpuidFlag; // CPUID support flag. ND_VALID_MODES ValidModes; // Valid CPU modes for the instruction. ND_VALID_PREFIXES ValidPrefixes; // Indicates which prefixes are valid for this instruction. ND_VALID_DECORATORS ValidDecorators; // What decorators are accepted by the instruction. // Instruction bytes & mnemonic. union { ND_UINT8 PrimaryOpCode; // Main opcode. ND_UINT8 Condition:4; // Condition code. Valid only if ND_FLAG_COND is set in Attributes. // Aliased over low 4 bits inside the main opcode. }; const char *Mnemonic; // Instruction mnemonic. ND_UINT8 InstructionBytes[16]; // The entire instruction. ND_UINT8 OpCodeBytes[3]; // Opcode bytes - escape codes and main opcode. } INSTRUX, *PINSTRUX; // // Decoder context. Such a structure must be passed to the NdDecodeWithContext API. This structure must be initialized // only once, and then it can be re-used across NdDecodeWithContext calls. // typedef struct _ND_CONTEXT { ND_UINT64 DefCode : 4; // Decode mode - one of the ND_CODE_* values. ND_UINT64 DefData : 4; // Data mode - one of the ND_DATA_* values. ND_UINT64 DefStack : 4; // Stack mode - one of the ND_STACK_* values. ND_UINT64 VendMode : 4; // Prefered vendor - one of the ND_VEND_* values. ND_UINT64 FeatMode : 8; // Supported features mask. A combination of ND_FEAT_* values. ND_UINT64 Reserved : 40; // Reserved for future use. ND_UINT32 Options; // Decoding options. A combination of ND_OPTION_* values. } ND_CONTEXT; /// Decode only explicit instruction operands. If this options is set, implicit operands, such as RIP or RFLAGS /// will not be decoded. As a consequence, the following fields inside INSTRUX will be undefined: /// CsAccess, RipAccess, RflAccess, StackAcces, MemoryAccess, BranchInfo. #define ND_OPTION_ONLY_EXPLICIT_OPERANDS 0x00000001 // // Operands access map. Contains every register except for MSR & XCR, includes memory, flags, RIP, stack. // Use NdGetFullAccessMap to populate this structure. // typedef struct _ND_ACCESS_MAP { ND_UINT8 RipAccess; ND_UINT8 FlagsAccess; ND_UINT8 StackAccess; ND_UINT8 MemAccess; ND_UINT8 MxcsrAccess; ND_UINT8 PkruAccess; ND_UINT8 SspAccess; ND_UINT8 GprAccess[ND_MAX_GPR_REGS]; ND_UINT8 SegAccess[ND_MAX_SEG_REGS]; ND_UINT8 FpuAccess[ND_MAX_FPU_REGS]; ND_UINT8 MmxAccess[ND_MAX_MMX_REGS]; ND_UINT8 SseAccess[ND_MAX_SSE_REGS]; ND_UINT8 CrAccess [ND_MAX_CR_REGS ]; ND_UINT8 DrAccess [ND_MAX_DR_REGS ]; ND_UINT8 TrAccess [ND_MAX_TR_REGS ]; ND_UINT8 BndAccess[ND_MAX_BND_REGS]; ND_UINT8 MskAccess[ND_MAX_MSK_REGS]; ND_UINT8 TmmAccess[ND_MAX_TILE_REGS]; ND_UINT8 SysAccess[ND_MAX_SYS_REGS]; ND_UINT8 X87Access[ND_MAX_X87_REGS]; } ND_ACCESS_MAP, *PND_ACCESS_MAP; // // Operand reverse-lookup table. Each entry inside this structure contains the pointer to the relevant operand. // Some rules govern this special structure: // - It is not generated by default. The user must call NdGetOperandRlut manually to fill in this structure. // - This structure holds pointers inside the INSTRUX provided to the NdGetOperandRlut function; please make sure // you call NdGetOperandRlut again if the INSTRUX is relocated, as all the pointers will dangle. // - Not all the operand types have a corresponding entry in ND_OPERAND_RLUT, only the usual ones. // - Some operands may have multiple entries in ND_OPERAND_RLUT - for example, RMW (read-modify-write) instructions // will have Dst1 and Src1 pointing to the same operand. // - The implicit registers entries in ND_OPERAND_RLUT will point to the operand which is of that type, and implicit; // for example, ND_OPERAND_RLUT.Rax will be NULL for `add rax, rcx`, since in this case, `rax` is not an implicit // operand. For `cpuid`, however, ND_OPERAND_RLUT.Rax will point to the implicit `eax` register. // Use NdGetOperandRlut to populate this structure. // typedef struct _ND_OPERAND_RLUT { PND_OPERAND Dst1; // First destination operand. PND_OPERAND Dst2; // Second destination operand. PND_OPERAND Src1; // First source operand. PND_OPERAND Src2; // Second source operand. PND_OPERAND Src3; // Third source operand. PND_OPERAND Src4; // Fourth source operand. PND_OPERAND Mem1; // First memory operand. PND_OPERAND Mem2; // Second memory operand. PND_OPERAND Stack; // Stack operand. PND_OPERAND Flags; // Flags register operand. PND_OPERAND Rip; // Instruction Pointer register operand. PND_OPERAND Cs; // Implicit CS operand. PND_OPERAND Ss; // Implicit SS operand. PND_OPERAND Rax; // Implicit accumulator register operand. PND_OPERAND Rcx; // Implicit counter register operand. PND_OPERAND Rdx; // Implicit data register operand PND_OPERAND Rbx; // Implicit base address register operand. PND_OPERAND Rsp; // Implicit stack pointer operand. PND_OPERAND Rbp; // Implicit base pointer operand. PND_OPERAND Rsi; // Implicit source index operand. PND_OPERAND Rdi; // Implicit destination index operand. } ND_OPERAND_RLUT; #ifdef __cplusplus extern "C" { #endif // // Returns the bddisasm version. // void NdGetVersion( ND_UINT32 *Major, ND_UINT32 *Minor, ND_UINT32 *Revision, const char **BuildDate, const char **BuildTime ); // // Decode one instruction. Note that this is equivalent to: // NdDecodeEx(Instrux, Code, ND_MAX_INSTRUCTION_LEN, DefCode, DefData). // This version should be used if the caller doesn't care about the length of the buffer. Otherwise, use the other // decode API. // NDSTATUS NdDecode( INSTRUX *Instrux, // Output decoded instruction. const ND_UINT8 *Code, // Buffer containing the instruction bytes. ND_UINT8 DefCode, // Decode mode - one of the ND_CODE_* values. ND_UINT8 DefData // Data mode - one of the ND_DATA_* value. ); // // Decode one instruction. Note that this is equivalent to: // NdDecodeEx2(Instrux, Code, Size, DefCode, DefData, DefCode, ND_VEND_ANY). // By default, the used vendor will be ND_VEND_ANY, so all instructions will be decoded. // By default, the feature mode will be ND_FEAT_ALL, so all instructions will be decoded (but may yield error where // otherwise a NOP would be encoded - use ND_FEAT_NONE in that case). // NDSTATUS NdDecodeEx( INSTRUX *Instrux, // Output decoded instruction. const ND_UINT8 *Code, // Buffer containing the instruction bytes. ND_SIZET Size, // Maximum size of the Code buffer. ND_UINT8 DefCode, // Decode mode - one of the ND_CODE_* values. ND_UINT8 DefData // Data mode - one of the ND_DATA_* value. ); // // Fills a ND_CONTEXT structure, and calls NdDecodeWithContext. The feature mode will be ND_FEAT_ALL by default. // NDSTATUS NdDecodeEx2( INSTRUX *Instrux, // Output decoded instruction. const ND_UINT8 *Code, // Buffer containing the instruction bytes. ND_SIZET Size, // Maximum size of the Code buffer. ND_UINT8 DefCode, // Decode mode - one of the ND_CODE_* values. ND_UINT8 DefData, // Data mode - one of the ND_DATA_* value. ND_UINT8 DefStack, // Stack mode - one of the ND_STACK_* values. ND_UINT8 PreferedVendor // Preferred vendor - one of the ND_VEND_* values. ); // // This API received a decode context, where it expects DefCode, DefData, DefStack, VendMode and FeatMode to be // already initialized. The Context will not be modified by the decoder, so it can be reused across decode calls. // The Context should initially be initialized using NdInitContext. This will ensure backwards compatibility // by setting new fields to default values. // Note that this is the base decoding API, and this ends up being called by all the other decoding APIs, after // providing default arguments and filling them in the Context structure. For maximum speed, use this instead of // the others. // NDSTATUS NdDecodeWithContext( INSTRUX *Instrux, // Output decoded instruction. const ND_UINT8 *Code, // Buffer containing the instruction bytes. ND_SIZET Size, // Maximum size of the Code buffer. ND_CONTEXT *Context // Context describing decode mode, vendor mode and supported features. ); // // Convert the given instruction into textual representation (Intel syntax). // NDSTATUS NdToText( const INSTRUX *Instrux, ND_UINT64 Rip, ND_UINT32 BufferSize, char *Buffer ); // // Returns true if the instruction is RIP relative. Note that this function is kept for backwards compatibility, since // there already is a IsRipRelative field inside INSTRUX. // ND_BOOL NdIsInstruxRipRelative( const INSTRUX *Instrux ); // // Returns an access map that contains the access for each register. // NDSTATUS NdGetFullAccessMap( const INSTRUX *Instrux, ND_ACCESS_MAP *AccessMap ); // // Returns an operand reverse-lookup. One can use the Rlut to quickly reference different kinds of operands in INSTRUX. // NDSTATUS NdGetOperandRlut( const INSTRUX *Instrux, ND_OPERAND_RLUT *Rlut ); // // Initialize the decoder context. // void NdInitContext( ND_CONTEXT *Context ); #ifdef __cplusplus } #endif // #pragma warning(default: 4214) // Bitfield in type other than int. // #pragma warning(default: 4201) // Nonstandard extension used: nameless struct/union. #ifdef _MSC_VER #pragma warning(pop) #endif #endif // BDX86_CORE_H