/* * Copyright (c) 2016 Thomas Pornin * * Permission is hereby granted, free of charge, to any person obtaining * a copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation the rights to use, copy, modify, merge, publish, * distribute, sublicense, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #include "bearssl.h" /* * A "profile" is an initialisation function for a SSL context, that * configures a list of cipher suites and algorithm implementations. * While BearSSL comes with a few predefined profiles, you might one * to define you own, using the example below as guidance. * * Each individual initialisation call sets a parameter or an algorithm * support. Setting a specific algorithm pulls in the implementation of * that algorithm in the compiled binary, as per static linking * behaviour. Removing some of this calls will then reduce total code * footprint, but also mechanically prevents some features to be * supported (protocol versions and cipher suites). * * The two below define profiles for the client and the server contexts, * respectively. Of course, in a typical size-constrained application, * you would use one or the other, not both, to avoid pulling in code * for both. */ void example_client_profile(br_ssl_client_context *cc /* and possibly some other arguments */) { /* * A list of cipher suites, by preference (first is most * preferred). The list below contains all cipher suites supported * by BearSSL; trim it done to your needs. */ static const uint16_t suites[] = { BR_TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256, BR_TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256, BR_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256, BR_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256, BR_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384, BR_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384, BR_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256, BR_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256, BR_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384, BR_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384, BR_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA, BR_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA, BR_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA, BR_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA, BR_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256, BR_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256, BR_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384, BR_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384, BR_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256, BR_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256, BR_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384, BR_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384, BR_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA, BR_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA, BR_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA, BR_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA, BR_TLS_RSA_WITH_AES_128_GCM_SHA256, BR_TLS_RSA_WITH_AES_256_GCM_SHA384, BR_TLS_RSA_WITH_AES_128_CBC_SHA256, BR_TLS_RSA_WITH_AES_256_CBC_SHA256, BR_TLS_RSA_WITH_AES_128_CBC_SHA, BR_TLS_RSA_WITH_AES_256_CBC_SHA, BR_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA, BR_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA, BR_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA, BR_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA, BR_TLS_RSA_WITH_3DES_EDE_CBC_SHA }; /* * Client context must be cleared at some point. This sets * every value and pointer to 0 or NULL. */ br_ssl_client_zero(cc); /* * Define minimum and maximum protocol versions. Supported * versions are: * BR_TLS10 TLS 1.0 * BR_TLS11 TLS 1.1 * BR_TLS12 TLS 1.2 */ br_ssl_engine_set_versions(&cc->eng, BR_TLS10, BR_TLS12); /* * Set the PRF implementation(s). * For TLS 1.0 and 1.1, the "prf10" is needed. * For TLS 1.2, this depends on the cipher suite: * -- cipher suites with a name ending in "SHA384" need "prf_sha384"; * -- all others need "prf_sha256". * * Note that a cipher suite like TLS_RSA_WITH_AES_128_CBC_SHA will * use SHA-1 for the per-record MAC (that's what the final "SHA" * means), but still SHA-256 for the PRF when selected along with * the TLS-1.2 protocol version. */ br_ssl_engine_set_prf10(&cc->eng, &br_tls10_prf); br_ssl_engine_set_prf_sha256(&cc->eng, &br_tls12_sha256_prf); br_ssl_engine_set_prf_sha384(&cc->eng, &br_tls12_sha384_prf); /* * Set hash functions for the engine. Required hash functions * depend on the protocol and cipher suite: * * -- TLS 1.0 and 1.1 require both MD5 and SHA-1. * -- With TLS 1.2, cipher suites with a name ending in "SHA384" * require SHA-384. * -- With TLS 1.2, cipher suites with a name ending in "SHA256" * require SHA-256. * -- With TLS 1.2, cipher suites with a name ending in "SHA" * require both SHA-256 and SHA-1. * * Moreover, these hash functions are also used to compute * hashes supporting signatures on the server side (for ECDHE_* * cipher suites), and on the client side (for client * certificates, except in the case of full static ECDH). In TLS * 1.0 and 1.1, SHA-1 (and also MD5) will be used, but with TLS * 1.2 these hash functions are negotiated between client and * server; SHA-256 and/or SHA-384 should be sufficient in * practice. * * Note that with current implementations, SHA-224 and SHA-256 * share the same file, so if you use one, you may have the other * one with no additional overhead. Similarly, SHA-384 and SHA-512 * share the same implementation code. */ br_ssl_engine_set_hash(&cc->eng, br_md5_ID, &br_md5_vtable); br_ssl_engine_set_hash(&cc->eng, br_sha1_ID, &br_sha1_vtable); br_ssl_engine_set_hash(&cc->eng, br_sha224_ID, &br_sha224_vtable); br_ssl_engine_set_hash(&cc->eng, br_sha256_ID, &br_sha256_vtable); br_ssl_engine_set_hash(&cc->eng, br_sha384_ID, &br_sha384_vtable); br_ssl_engine_set_hash(&cc->eng, br_sha512_ID, &br_sha512_vtable); /* * Set the cipher suites. All specified cipher suite MUST be * supported, and the relevant algorithms MUST have been * configured (failure to provide needed implementations may * trigger unwanted behaviours like segfaults or overflows). */ br_ssl_engine_set_suites(&cc->eng, suites, (sizeof suites) / (sizeof suites[0])); /* * Public-key algorithm implementations. * * -- RSA public core ("rsapub") is needed for "RSA" key exchange * (cipher suites whose name starts with TLS_RSA). * * -- RSA signature verification ("rsavrfy") is needed for * "ECDHE_RSA" cipher suites (not ECDH_RSA). * * -- Elliptic curve implementation ("ec") is needed for cipher * suites that use elliptic curves (both "ECDH" and "ECDHE" * cipher suites). * * -- ECDSA signature verification is needed for "ECDHE_ECDSA" * cipher suites (but not for ECDHE_RSA, ECDH_ECDSA or ECDH_RSA). * * Normaly, you use the "default" implementations, obtained * through relevant function calls. These functions return * implementations that are deemed "best" for the current * platform, where "best" means "fastest within constant-time * implementations". Selecting the default implementation is a * mixture of compile-time and runtime checks. * * Nevertheless, specific implementations may be selected * explicitly, e.g. to use code which is slower but with a * smaller footprint. * * The RSA code comes in three variants, called "i15", "i31" and * "i32". The "i31" code is somewhat faster than the "i32" code. * Usually, "i31" is faster than "i15", except on some specific * architectures (ARM Cortex M0, M0+, M1 and M3) where the "i15" * should be prefered (the "i15" code is constant-time, while * the "i31" is not, and the "i15" code is faster anyway). * * ECDSA code also comes in "i15" and "i31" variants. As in the * case of RSA, the "i31" code is faster, except on the small * ARM Cortex M, where the "i15" code is faster and safer. * * There are no less than 10 elliptic curve implementations: * * - ec_c25519_i15, ec_c25519_i31, ec_c25519_m15 and ec_c25519_m31 * implement Curve25519. * * - ec_p256_m15 and ec_p256_m31 implement NIST curve P-256. * * - ec_prime_i15 and ec_prime_i31 implement NIST curves P-256, * P-384 and P-521. * * - ec_all_m15 is an aggregate implementation that uses * ec_c25519_m15, ec_p256_m15 and ec_prime_i15. * * - ec_all_m31 is an aggregate implementation that uses * ec_c25519_m31, ec_p256_m31 and ec_prime_i31. * * For a given curve, "m15" is faster than "i15" (but possibly * with a larger code footprint) and "m31" is faster than "i31" * (there again with a larger code footprint). For best * performance, use ec_all_m31, except on the small ARM Cortex M * where ec_all_m15 should be used. Referencing the other * implementations directly will result in smaller code, but * support for fewer curves and possibly lower performance. */ br_ssl_client_set_default_rsapub(cc); br_ssl_engine_set_default_rsavrfy(&cc->eng); br_ssl_engine_set_default_ecdsa(&cc->eng); /* Alternate: set implementations explicitly. br_ssl_client_set_rsapub(cc, &br_rsa_i31_public); br_ssl_client_set_rsavrfy(cc, &br_rsa_i31_pkcs1_vrfy); br_ssl_engine_set_ec(&cc->eng, &br_ec_all_m31); br_ssl_engine_set_ecdsa(&cc->eng, &br_ecdsa_i31_vrfy_asn1); */ /* * Record handler: * -- Cipher suites in AES_128_CBC, AES_256_CBC and 3DES_EDE_CBC * need the CBC record handler ("set_cbc"). * -- Cipher suites in AES_128_GCM and AES_256_GCM need the GCM * record handler ("set_gcm"). * -- Cipher suites in CHACHA20_POLY1305 need the ChaCha20+Poly1305 * record handler ("set_chapol"). */ br_ssl_engine_set_cbc(&cc->eng, &br_sslrec_in_cbc_vtable, &br_sslrec_out_cbc_vtable); br_ssl_engine_set_gcm(&cc->eng, &br_sslrec_in_gcm_vtable, &br_sslrec_out_gcm_vtable); br_ssl_engine_set_chapol(&cc->eng, &br_sslrec_in_chapol_vtable, &br_sslrec_out_chapol_vtable); /* * Symmetric encryption: * -- AES_128_CBC and AES_256_CBC require an "aes_cbc" implementation * (actually two implementations, for encryption and decryption). * -- 3DES_EDE_CBC requires a "des_cbc" implementation * (actually two implementations, for encryption and decryption). * -- AES_128_GCM and AES_256_GCM require an "aes_ctr" imeplementation * and also a GHASH implementation. * * Two 3DES implementations are provided: * * des_tab Classical table-based implementation; it is * not constant-time. * * dest_ct Constant-time DES/3DES implementation. It is * slower than des_tab. * * Four AES implementations are provided: * * aes_ct Constant-time AES implementation, for 32-bit * systems. * * aes_ct64 Constant-time AES implementation, for 64-bit * systems. It actually also runs on 32-bit systems, * but, on such systems, it yields larger code and * slightly worse performance. On 64-bit systems, * aes_ct64 is about twice faster than aes_ct for * CTR processing (GCM encryption and decryption), * and for CBC (decryption only). * * aes_small Smallest implementation provided, but also the * slowest, and it is not constant-time. Use it * only if desperate for code size. * * aes_big Classical table-based AES implementation. This * is decently fast and still resonably compact, * but it is not constant-time. * * aes_x86ni Very fast implementation that uses the AES-NI * opcodes on recent x86 CPU. But it may not be * compiled in the library if the compiler or * architecture is not supported; and the CPU * may also not support the opcodes. Selection * functions are provided to test for availability * of the code and the opcodes. * * Whether having constant-time implementations is absolutely * required for security depends on the context (in particular * whether the target architecture actually has cache memory), * and while side-channel analysis for non-constant-time AES * code has been demonstrated in lab conditions, it certainly * does not apply to all actual usages, and it has never been * spotted in the wild. It is still considered cautious to use * constant-time code by default, and to consider the other * implementations only if duly measured performance issues make * it mandatory. */ br_ssl_engine_set_aes_cbc(&cc->eng, &br_aes_ct_cbcenc_vtable, &br_aes_ct_cbcdec_vtable); br_ssl_engine_set_aes_ctr(&cc->eng, &br_aes_ct_ctr_vtable); /* Alternate: aes_ct64 br_ssl_engine_set_aes_cbc(&cc->eng, &br_aes_ct64_cbcenc_vtable, &br_aes_ct64_cbcdec_vtable); br_ssl_engine_set_aes_ctr(&cc->eng, &br_aes_ct64_ctr_vtable); */ /* Alternate: aes_small br_ssl_engine_set_aes_cbc(&cc->eng, &br_aes_small_cbcenc_vtable, &br_aes_small_cbcdec_vtable); br_ssl_engine_set_aes_ctr(&cc->eng, &br_aes_small_ctr_vtable); */ /* Alternate: aes_big br_ssl_engine_set_aes_cbc(&cc->eng, &br_aes_big_cbcenc_vtable, &br_aes_big_cbcdec_vtable); br_ssl_engine_set_aes_ctr(&cc->eng, &br_aes_big_ctr_vtable); */ br_ssl_engine_set_des_cbc(&cc->eng, &br_des_ct_cbcenc_vtable, &br_des_ct_cbcdec_vtable); /* Alternate: des_tab br_ssl_engine_set_des_cbc(&cc->eng, &br_des_tab_cbcenc_vtable, &br_des_tab_cbcdec_vtable); */ /* * GHASH is needed for AES_128_GCM and AES_256_GCM. Three * implementations are provided: * * ctmul Uses 32-bit multiplications with a 64-bit result. * * ctmul32 Uses 32-bit multiplications with a 32-bit result. * * ctmul64 Uses 64-bit multiplications with a 64-bit result. * * On 64-bit platforms, ctmul64 is the smallest and fastest of * the three. On 32-bit systems, ctmul should be prefered. The * ctmul32 implementation is meant to be used for the specific * 32-bit systems that do not have a 32x32->64 multiplier (i.e. * the ARM Cortex-M0 and Cortex-M0+). * * These implementations are all constant-time as long as the * underlying multiplication opcode is constant-time (which is * true for all modern systems, but not for older architectures * such that ARM9 or 80486). */ br_ssl_engine_set_ghash(&cc->eng, &br_ghash_ctmul); /* Alternate: ghash_ctmul32 br_ssl_engine_set_ghash(&cc->eng, &br_ghash_ctmul32); */ /* Alternate: ghash_ctmul64 br_ssl_engine_set_ghash(&cc->eng, &br_ghash_ctmul64); */ #if 0 /* * For a client, the normal case is to validate the server * certificate with regards to a set of trust anchors. This * entails using a br_x509_minimal_context structure, configured * with the relevant algorithms, as shown below. * * Alternatively, the client could "know" the intended server * public key through an out-of-band mechanism, in which case * a br_x509_knownkey_context is appropriate, for a much reduced * code footprint. * * We assume here that the following extra parameters have been * provided: * * xc engine context (br_x509_minimal_context *) * trust_anchors trust anchors (br_x509_trust_anchor *) * trust_anchors_num number of trust anchors (size_t) */ /* * The X.509 engine needs a hash function for processing the * subject and issuer DN of certificates and trust anchors. Any * supported hash function is appropriate; here we use SHA-256. * The trust an */ br_x509_minimal_init(xc, &br_sha256_vtable, trust_anchors, trust_anchors_num); /* * Set suites and asymmetric crypto implementations. We use the * "i31" code for RSA (it is somewhat faster than the "i32" * implementation). These implementations are used for * signature verification on certificates, but not for the * SSL-specific usage of the server's public key. For instance, * if the server has an EC public key but the rest of the chain * (intermediate CA, root...) use RSA, then you would need only * the RSA verification function below. */ br_x509_minimal_set_rsa(xc, &br_rsa_i31_pkcs1_vrfy); br_x509_minimal_set_ecdsa(xc, &br_ec_prime_i31, &br_ecdsa_i31_vrfy_asn1); /* * Set supported hash functions. These are for signatures on * certificates. There again, you only need the hash functions * that are actually used in certificates, but if a given * function was included for the SSL engine, you may as well * add it here. * * Note: the engine explicitly rejects signatures that use MD5. * Thus, there is no need for MD5 here. */ br_ssl_engine_set_hash(xc, br_sha1_ID, &br_sha1_vtable); br_ssl_engine_set_hash(xc, br_sha224_ID, &br_sha224_vtable); br_ssl_engine_set_hash(xc, br_sha256_ID, &br_sha256_vtable); br_ssl_engine_set_hash(xc, br_sha384_ID, &br_sha384_vtable); br_ssl_engine_set_hash(xc, br_sha512_ID, &br_sha512_vtable); /* * Link the X.509 engine in the SSL engine. */ br_ssl_engine_set_x509(&cc->eng, &xc->vtable); #endif } /* * Example server profile. Most of it is shared with the client * profile, so see the comments in the client function for details. * * This example function assumes a server with a (unique) RSA private * key, so the list of cipher suites is trimmed down for RSA. */ void example_server_profile(br_ssl_server_context *cc, const br_x509_certificate *chain, size_t chain_len, const br_rsa_private_key *sk) { static const uint16_t suites[] = { BR_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256, BR_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384, BR_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256, BR_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384, BR_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA, BR_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA, BR_TLS_RSA_WITH_AES_128_GCM_SHA256, BR_TLS_RSA_WITH_AES_256_GCM_SHA384, BR_TLS_RSA_WITH_AES_128_CBC_SHA256, BR_TLS_RSA_WITH_AES_256_CBC_SHA256, BR_TLS_RSA_WITH_AES_128_CBC_SHA, BR_TLS_RSA_WITH_AES_256_CBC_SHA, BR_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA, BR_TLS_RSA_WITH_3DES_EDE_CBC_SHA }; br_ssl_server_zero(cc); br_ssl_engine_set_versions(&cc->eng, BR_TLS10, BR_TLS12); br_ssl_engine_set_prf10(&cc->eng, &br_tls10_prf); br_ssl_engine_set_prf_sha256(&cc->eng, &br_tls12_sha256_prf); br_ssl_engine_set_prf_sha384(&cc->eng, &br_tls12_sha384_prf); /* * Apart from the requirements listed in the client side, these * hash functions are also used by the server to compute its * signature on ECDHE parameters. Which functions are needed * depends on what the client may support; furthermore, the * client may fail to send the relevant extension, in which * case the server will default to whatever it can (as per the * standard, it should be SHA-1 in that case). */ br_ssl_engine_set_hash(&cc->eng, br_md5_ID, &br_md5_vtable); br_ssl_engine_set_hash(&cc->eng, br_sha1_ID, &br_sha1_vtable); br_ssl_engine_set_hash(&cc->eng, br_sha224_ID, &br_sha224_vtable); br_ssl_engine_set_hash(&cc->eng, br_sha256_ID, &br_sha256_vtable); br_ssl_engine_set_hash(&cc->eng, br_sha384_ID, &br_sha384_vtable); br_ssl_engine_set_hash(&cc->eng, br_sha512_ID, &br_sha512_vtable); br_ssl_engine_set_suites(&cc->eng, suites, (sizeof suites) / (sizeof suites[0])); /* * Elliptic curve implementation is used for ECDHE suites (but * not for ECDH). */ br_ssl_engine_set_ec(&cc->eng, &br_ec_prime_i31); /* * Set the "server policy": handler for the certificate chain * and private key operations. Here, we indicate that the RSA * private key is fit for both signing and decrypting, and we * provide the two relevant implementations. * BR_KEYTYPE_KEYX allows TLS_RSA_*, BR_KEYTYPE_SIGN allows * TLS_ECDHE_RSA_*. */ br_ssl_server_set_single_rsa(cc, chain, chain_len, sk, BR_KEYTYPE_KEYX | BR_KEYTYPE_SIGN, br_rsa_i31_private, br_rsa_i31_pkcs1_sign); /* * If the server used an EC private key, this call would look * like this: br_ssl_server_set_single_ec(cc, chain, chain_len, sk, BR_KEYTYPE_KEYX | BR_KEYTYPE_SIGN, cert_issuer_key_type, &br_ec_prime_i31, br_ecdsa_i31_sign_asn1); * Note the tricky points: * * -- "ECDH" cipher suites use only the EC code (&br_ec_prime_i31); * the ECDHE_ECDSA cipher suites need both the EC code and * the ECDSA signature implementation. * * -- For "ECDH" (not "ECDHE") cipher suites, the engine must * know the key type (RSA or EC) for the intermediate CA that * issued the server's certificate; this is an artefact of * how the protocol is defined. BearSSL won't try to decode * the server's certificate to obtain that information (it * could do that, the code is there, but it would increase the * footprint). So this must be provided by the caller. * * -- BR_KEYTYPE_KEYX allows ECDH, BR_KEYTYPE_SIGN allows * ECDHE_ECDSA. */ br_ssl_engine_set_cbc(&cc->eng, &br_sslrec_in_cbc_vtable, &br_sslrec_out_cbc_vtable); br_ssl_engine_set_gcm(&cc->eng, &br_sslrec_in_gcm_vtable, &br_sslrec_out_gcm_vtable); br_ssl_engine_set_aes_cbc(&cc->eng, &br_aes_ct_cbcenc_vtable, &br_aes_ct_cbcdec_vtable); br_ssl_engine_set_aes_ctr(&cc->eng, &br_aes_ct_ctr_vtable); /* Alternate: aes_ct64 br_ssl_engine_set_aes_cbc(&cc->eng, &br_aes_ct64_cbcenc_vtable, &br_aes_ct64_cbcdec_vtable); br_ssl_engine_set_aes_ctr(&cc->eng, &br_aes_ct64_ctr_vtable); */ /* Alternate: aes_small br_ssl_engine_set_aes_cbc(&cc->eng, &br_aes_small_cbcenc_vtable, &br_aes_small_cbcdec_vtable); br_ssl_engine_set_aes_ctr(&cc->eng, &br_aes_small_ctr_vtable); */ /* Alternate: aes_big br_ssl_engine_set_aes_cbc(&cc->eng, &br_aes_big_cbcenc_vtable, &br_aes_big_cbcdec_vtable); br_ssl_engine_set_aes_ctr(&cc->eng, &br_aes_big_ctr_vtable); */ br_ssl_engine_set_des_cbc(&cc->eng, &br_des_ct_cbcenc_vtable, &br_des_ct_cbcdec_vtable); /* Alternate: des_tab br_ssl_engine_set_des_cbc(&cc->eng, &br_des_tab_cbcenc_vtable, &br_des_tab_cbcdec_vtable); */ br_ssl_engine_set_ghash(&cc->eng, &br_ghash_ctmul); /* Alternate: ghash_ctmul32 br_ssl_engine_set_ghash(&cc->eng, &br_ghash_ctmul32); */ /* Alternate: ghash_ctmul64 br_ssl_engine_set_ghash(&cc->eng, &br_ghash_ctmul64); */ }