unit JvDesignImp;

{$mode objfpc}{$H+}

interface

uses
  {$IFDEF UNITVERSIONING}
  JclUnitVersioning,
  {$ENDIF UNITVERSIONING}
  {$ifdef windows}
  win32proc,
  {$endif}
  LCLProc, LCLType, LResources, LCLIntf, LMessages, SysUtils, Classes, Controls, Graphics,
  Forms, ExtCtrls, Contnrs, JvDesignUtils,
  JvDesignSurface, componenteditors, propedits;

const
  cJvDesignDefaultHandleWidth = 8;

type
  TJvDesignHandle = class(TCustomControl)
  private
    FResizeable: Boolean;
  protected
    function HandleRect(AIndex: Integer): TRect;
    function HitRect(APoint: TPoint): Integer;
    procedure Paint; override;
    procedure PaintEdge(const ARect: TRect);
    procedure PaintHandle(const ARect: TRect);
    procedure WMEraseBkgnd(var Msg: TLMEraseBkgnd); message LM_ERASEBKGND;
    property Resizeable: Boolean read FResizeable write FResizeable;
  end;

  TJvDesignHandles = class(TComponent)
  private
    FContainer: TWinControl;
    FSelected: TControl;
    FResizeable: Boolean;
  protected
    function GetHandleWidth: Integer;
    function GetSelectionRect: TRect;
    function SelectedToScreenRect(const ARect: TRect): TRect;
    procedure CreateHandles;
    procedure SetContainer(const Value: TWinControl);
    procedure SetHandleRects(const ARect: TRect);
    procedure SetResizeable(const Value: Boolean);
    procedure SetSelected(const Value: TControl);
    procedure ShowHideHandles(AShow: Boolean);
  public
    Handles: array [0..3] of TJvDesignHandle;
    constructor Create(AOwner: TComponent); override;
    function HitRect(X, Y: Integer): TJvDesignHandleId;
    function SelectedToContainer(const APt: TPoint): TPoint;
    procedure RepaintHandles;
    procedure UpdateHandles;
    property Container: TWinControl read FContainer write SetContainer;
    property HandleWidth: Integer read GetHandleWidth;
    property Resizeable: Boolean read FResizeable write SetResizeable;
    property Selected: TControl read FSelected write SetSelected;
  end;

  TJvDesignSelector = class(TJvDesignCustomSelector)
  private
    FHandles: TObjectList;
    FHandleWidth: Integer;
  protected
    function FindHandles(AValue: TControl): TJvDesignHandles;
    function GetCount: Integer; override;
    function GetHandles(AIndex: Integer): TJvDesignHandles;
    function GetSelection(AIndex: Integer): TControl; override;
    procedure SetHandles(AIndex: Integer; AValue: TJvDesignHandles);
    procedure SetHandleWidth(AValue: Integer);
    procedure SetSelection(AIndex: Integer; AValue: TControl); override;
    procedure ShowHideResizeHandles;
    property Handles[AIndex: Integer]: TJvDesignHandles read GetHandles write SetHandles;
  public
    constructor Create(ASurface: TJvDesignSurface); override;
    destructor Destroy; override;
    function GetClientControl(AControl: TControl): TControl; override;
    function GetCursor(AX, AY: Integer): TCursor; override;
    function GetHitHandle(AX, AY: Integer): TJvDesignHandleId; override;
    function IsSelected(AValue: TControl): Boolean; override;
    procedure AddToSelection(AValue: TControl); override;
    procedure ClearSelection; override;
    procedure RemoveFromSelection(AValue: TControl); override;
    procedure Update; override;
  published
    property HandleWidth: Integer read FHandleWidth write SetHandleWidth default cJvDesignDefaultHandleWidth;
  end;

  TJvDesignCustomMouseTool = class(TObject)
  protected
    FDragRect: TRect;
  public
    procedure MouseDown(Button: TMouseButton; Shift: TShiftState;
      X, Y: Integer); virtual; abstract;
    procedure MouseMove(Shift: TShiftState; X, Y: Integer); virtual; abstract;
    procedure MouseUp(Button: TMouseButton; Shift: TShiftState;
      X, Y: Integer);  virtual; abstract;
    property DragRect: TRect read FDragRect write FDragRect;
  end;

  TJvDesignDragMode = (dmNone, dmMove, dmResize, dmSelect, dmCreate);

  TJvDesignAction = (daSelectParent, daDelete, daCopy, daCut, daPaste,
    daNudgeLeft, daNudgeRight, daNudgeUp, daNudgeDown, daGrowWidth,
    daShrinkWidth, daGrowHeight, daShrinkHeight, daLastAction = MaxInt);

  TJvDesignController = class(TJvDesignCustomController)
  private
    FClicked: TControl;
    FDragMode: TJvDesignDragMode;
    FDragRect: TRect;
    FKeyDownShift: TShiftState;
    FMouseIsDown: Boolean;
    FMouseTool: TJvDesignCustomMouseTool;
  protected
    function GetDragRect: TRect; override;
    function KeyDown(AKeyCode: Cardinal): Boolean; override;
    function KeyUp(AKeyCode: Cardinal): Boolean; override;
    function MouseDown(Button: TMouseButton; X, Y: Integer; TheMessage: TLMMouse): Boolean; override;
    function MouseMove(X, Y: Integer; TheMessage: TLMMouse): Boolean; override;
    function MouseUp(Button: TMouseButton; X, Y: Integer; TheMessage: TLMMouse): Boolean; override;
    procedure Action(AAction: TJvDesignAction);
  end;

  TJvDesignMouseTool = class(TJvDesignCustomMouseTool)
  private
    FSurface: TJvDesignSurface;
    FMouseLast: TPoint;
    FMouseStart: TPoint;
  protected
    function GetMouseDelta: TPoint; virtual;
  public
    constructor Create(AOwner: TJvDesignSurface); virtual;
    property Surface: TJvDesignSurface read FSurface write FSurface;
  end;

  TJvDesignMover = class(TJvDesignMouseTool)
  private
    FDragRects: array of TRect;
  protected
    procedure ApplyDragRects;
    procedure CalcDragRects;
    procedure CalcPaintRects;
    procedure PaintDragRects;
  public
    constructor Create(AOwner: TJvDesignSurface); override;
    procedure MouseDown(Button: TMouseButton; Shift: TShiftState;
      X, Y: Integer); override;
    procedure MouseMove(Shift: TShiftState; X, Y: Integer); override;
    procedure MouseUp(Button: TMouseButton; Shift: TShiftState;
      X, Y: Integer); override;
  end;

  TJvDesignBander = class(TJvDesignMouseTool)
  protected
    function GetClient: TControl; virtual;
    function GetPaintRect: TRect;
    procedure CalcDragRect; virtual;
    procedure PaintDragRect; virtual;
  public
    procedure MouseDown(Button: TMouseButton; Shift: TShiftState;
      X, Y: Integer); override;
    procedure MouseMove(Shift: TShiftState; X, Y: Integer); override;
    procedure MouseUp(Button: TMouseButton; Shift: TShiftState;
      X, Y: Integer); override;
  end;

  TJvDesignSizer = class(TJvDesignBander)
  private
    FHandleId: TJvDesignHandleId;
  protected
    function GetClient: TControl; override;
    procedure ApplyDragRect;
    procedure ApplyMouseDelta(X, Y: Integer);
    procedure CalcDragRect; override;
  public
    constructor CreateSizer(AOwner: TJvDesignSurface; AHandle: TJvDesignHandleId);
    procedure MouseUp(Button: TMouseButton; Shift: TShiftState; X, Y: Integer); override;
  end;

  TJvDesignDesigner = class( TComponentEditorDesigner)// TComponent, IDesignerHook)
  private
    FMessenger: TJvDesignCustomMessenger;
  public
    DDC: TDesignerDeviceContext;
    constructor Create(AMessenger: TJvDesignCustomMessenger); reintroduce;
    // IDesignerNotify interface
    procedure Modified;
    //
    procedure Notification(AComponent: TComponent; Operation: TOperation); override;
    function GetPropertyEditorHook: TPropertyEditorHook; override;

    function DeleteSelection: boolean; override;

    // IDesigner, IDesignerHook interface
    function GetCustomForm: TCustomForm;
    procedure SetCustomForm(Value: TCustomForm);
    function GetIsControl: Boolean;
    procedure SetIsControl(Value: Boolean);
    function IsDesignMsg(Sender: TControl; var Msg: TLMessage): Boolean; override;
    procedure PaintGrid; override;
    procedure ValidateRename(AComponent: TComponent; const CurName, NewName: string); reintroduce;
    function UniqueName(const BaseName: string): string; override;
    function GetRoot: TComponent;
    //{$IFDEF COMPILER9_UP}
    //procedure PaintMenu;
    //{$ENDIF COMPILER9_UP}
    property Messenger: TJvDesignCustomMessenger read FMessenger write FMessenger;
    property IsControl: Boolean read GetIsControl write SetIsControl;
    property Form: TCustomForm read GetCustomForm write SetCustomForm;
  end;


 {TJvDesignDesigner = class(TIDesigner) //class(TComponent, IDesignerHook)
  private
    FMessenger: TJvDesignCustomMessenger;
  public
    constructor Create(AMessenger: TJvDesignCustomMessenger); reintroduce;
    // IDesignerNotify interface
    procedure Modified;
    procedure Notification(AnObject: TPersistent; Operation: TOperation); reintroduce;

    // IDesigner, IDesignerHook interface
    function GetCustomForm: TCustomForm;
    procedure SetCustomForm(Value: TCustomForm);
    function GetIsControl: Boolean;
    procedure SetIsControl(Value: Boolean);
    function IsDesignMsg(Sender: TControl; var Msg: TMessage): Boolean;
    procedure PaintGrid;
    procedure ValidateRename(AComponent: TComponent; const CurName, NewName: string); reintroduce;
    function UniqueName(const BaseName: string): string;
    function GetRoot: TComponent;
    {$IFDEF COMPILER9_UP}
    procedure PaintMenu;
    {$ENDIF COMPILER9_UP}
    property Messenger: TJvDesignCustomMessenger read FMessenger write FMessenger;
    property IsControl: Boolean read GetIsControl write SetIsControl;
    property Form: TCustomForm read GetCustomForm write SetCustomForm;
  end;          }

  TJvDesignDesignerMessenger = class(TJvDesignCustomMessenger)
  private
    FDesignedForm: TCustomForm;
    FDesigner: TJvDesignDesigner;
  protected
    procedure SetComponentDesigning(AComponent: TComponent; ADesigning: Boolean);
    procedure SetContainer(AValue: TWinControl); override;
    procedure UndesignComponent(AComponent: TComponent);
  public
    constructor Create; override;
    destructor Destroy; override;
    procedure DesignComponent(AComponent: TComponent; ADesigning: Boolean); override;
  end;

  TJvDesignMessageHookList = class(TComponent)
  private
    FHooks: TObjectList;
    FUser: TJvDesignCustomMessenger;
  protected
    procedure Notification(AComponent: TComponent; Operation: TOperation); override;
  public
    constructor Create(AUser: TJvDesignCustomMessenger); reintroduce;
    destructor Destroy; override;
    procedure Clear;
    procedure Hook(AClient: TWinControl);
    procedure Unhook(AComponent: TComponent);
  end;

  TJvDesignWinControlHookMessenger = class(TJvDesignCustomMessenger)
  private
    FHooks: TJvDesignMessageHookList;
  protected
    procedure HookWinControl(AWinControl: TWinControl);
    procedure UnhookWinControl(AWinControl: TWinControl);
    procedure SetContainer(AValue: TWinControl); override;
  public
    constructor Create; override;
    destructor Destroy; override;
    procedure Clear; override;
    procedure DesignComponent(AComponent: TComponent; ADesigning: Boolean); override;
  end;

{$IFDEF UNITVERSIONING}
const
  UnitVersioning: TUnitVersionInfo = (
    RCSfile: '$URL: https://jvcl.svn.sourceforge.net/svnroot/jvcl/trunk/jvcl/run/JvDesignImp.pas $';
    Revision: '$Revision: 12931 $';
    Date: '$Date: 2010-11-28 15:36:50 +0200 (Κυρ, 28 Νοε 2010) $';
    LogPath: 'JVCL\run'
  );
{$ENDIF UNITVERSIONING}

implementation

uses
  JvResources, JvTypes;

var
  ShadedBits: TBitmap;

function NeedShadedBits: TBitmap;
begin
  if ShadedBits = nil then
  begin
    ShadedBits := TBitmap.Create;
    with ShadedBits do
    begin
      Width := 4;
      Height := 2;
      Canvas.Pixels[0, 0] := clGray;
      Canvas.Pixels[1, 0] := clBtnFace;
      Canvas.Pixels[2, 0] := clBtnFace;
      Canvas.Pixels[3, 0] := clBtnFace;
      Canvas.Pixels[0, 1] := clBtnFace;
      Canvas.Pixels[1, 1] := clBtnFace;
      Canvas.Pixels[2, 1] := clGray;
      Canvas.Pixels[3, 1] := clBtnFace;
    end;
  end;
  Result := ShadedBits;
end;

procedure FreeShadedBits;
begin
  FreeAndNil(ShadedBits);
end;

//=== { TJvDesignHandle } ====================================================

function TJvDesignHandle.HandleRect(AIndex: Integer): TRect;
var
  W: Integer;
begin
  W := TJvDesignHandles(Owner).HandleWidth;
  case AIndex of
    0:
      Result := Rect(0, 0, W, W); // left-top
    1:
      Result := Rect((Width - W) div 2, 0, (Width + W) div 2, W); // middle-top
    2:
      Result := Rect(Width - W, 0, Width, W); // right-top
    3:
      Result := Rect(0, (Height - W) div 2, W, (Height + W) div 2); // left-center
  end;
end;

procedure TJvDesignHandle.WMEraseBkgnd(var Msg: TLMEraseBkgnd);
begin
  Msg.Result := 1;
end;

procedure TJvDesignHandle.PaintHandle(const ARect: TRect);
begin
  Canvas.Rectangle(ARect);
end;

procedure TJvDesignHandle.PaintEdge(const ARect: TRect);
begin
  Canvas.FillRect(ClientRect);
end;

procedure TJvDesignHandle.Paint;
begin
  //CV with Canvas. do
  begin
    Canvas.Brush.Bitmap := NeedShadedBits;
    PaintEdge(ClientRect);
    Canvas.Brush.Bitmap := nil;
    Brush.Color := clWhite;
    Canvas.Pen.Color := clBlack;
    if Resizeable then
      if Width > Height then
      begin
        PaintHandle(HandleRect(0));
        PaintHandle(HandleRect(1));
        PaintHandle(HandleRect(2));
      end
      else
      begin
        PaintHandle(HandleRect(3));
      end
  end;
end;

function TJvDesignHandle.HitRect(APoint: TPoint): Integer;
begin
  Result := -1;
  if Width > Height then
    if PtInRect(HandleRect(0), APoint) then
      Result := 0
    else
    if PtInRect(HandleRect(1), APoint) then
      Result := 1
    else
    if PtInRect(HandleRect(2), APoint) then
      Result := 2;
  if Result < 0 then
    if PtInRect(HandleRect(3), APoint) then
      Result := 3;
end;

//=== { TJvDesignHandles } ===================================================

constructor TJvDesignHandles.Create(AOwner: TComponent);
begin
  inherited Create(AOwner);
  CreateHandles;
  Resizeable := True;
end;

procedure TJvDesignHandles.CreateHandles;
var
  I: Integer;
begin
  for I := Low(Handles) to High(Handles) do
    Handles[I] := TJvDesignHandle.Create(Self);
end;

function TJvDesignHandles.GetHandleWidth: Integer;
begin
  Result := TJvDesignSelector(Owner).HandleWidth;
end;

procedure TJvDesignHandles.SetContainer(const Value: TWinControl);
var
  I: Integer;
begin
  FContainer := Value;
  for I := Low(Handles) to High(Handles) do
    with Handles[I] do
    begin
      Visible := False;
      Parent := Container;
    end;
end;

procedure TJvDesignHandles.SetSelected(const Value: TControl);
begin
  if Selected <> Value then
  begin
    if Value is TJvDesignHandle then
      FSelected := nil
    else
      FSelected := Value;
    UpdateHandles;
  end;
end;

procedure TJvDesignHandles.SetResizeable(const Value: Boolean);
var
  I: Integer;
begin
  FResizeable := Value;
  for I := Low(Handles) to High(Handles) do
    Handles[I].Resizeable := Value;
end;

procedure TJvDesignHandles.ShowHideHandles(AShow: Boolean);
var
  I: Integer;
begin
  for I := Low(Handles) to High(Handles) do
    with Handles[I] do
    begin
      Visible := AShow;
      if AShow then
        BringToFront;
      Update;
    end;
end;

procedure TJvDesignHandles.UpdateHandles;
begin
  if (Selected <> nil) and (Container <> nil) and (Selected <> Container) then
  begin
    SetHandleRects(GetSelectionRect);
    ShowHideHandles(True);
  end
  else
    ShowHideHandles(False)
end;

procedure TJvDesignHandles.RepaintHandles;
var
  I: Integer;
begin
  for I := Low(Handles) to High(Handles) do
    Handles[I].Repaint;
end;

function TJvDesignHandles.HitRect(X, Y: Integer): TJvDesignHandleId;
const
  cRectIds: array [0..3, 0..3] of TJvDesignHandleId =
   (
    (dhLeftTop, dhMiddleTop, dhRightTop, dhNone),
    (dhNone, dhNone, dhNone, dhLeftMiddle),
    (dhNone, dhNone, dhNone, dhRightMiddle),
    (dhLeftBottom, dhMiddleBottom, dhRightBottom, dhNone)
   );
var
  I, R: Integer;
begin
  for I := 0 to 3 do
  begin
    with Handles[I] do
      R := HitRect(Point(X - Left, Y - Top));
    if R >= 0 then
    begin
      Result := cRectIds[I][R];
      Exit;
    end;
  end;
  Result := dhNone;
end;

function TJvDesignHandles.SelectedToContainer(const APt: TPoint): TPoint;
var
  C: TControl;
  r: trect;
begin
  Result := APt;
  C := Selected.Parent;
  while (C <> Container) and (C <> nil) do
  begin
    {$ifdef windows}
    {LCL hack}
    if (c is Twincontrol) then
    begin
      if GetLCLClientBoundsOffset(c, R) then
      begin
        Inc(result.x, R.Left);
        Inc(result.Y, R.Top);
      end;
    end;
    {$endif}


    if (c is TControl) then
    begin
      Inc(Result.X, C.Left);
      Inc(Result.Y, C.Top);
    end;
    C := C.Parent;
  end;
end;

function TJvDesignHandles.SelectedToScreenRect(const ARect: TRect): TRect;
var
  P: TWinControl;
begin
  if Selected = Container then
    P := Container
  else
    P := Selected.Parent;
  Result.TopLeft := P.ClientToScreen(ARect.TopLeft);
  Result.BottomRight := P.ClientToScreen(ARect.BottomRight);
end;

function TJvDesignHandles.GetSelectionRect: TRect;
var
  P: TPoint;
begin
  //selected.BoundsRect;
  if Selected = Container then
    P := Point(0, 0)
  else
    P := SelectedToContainer(Selected.BoundsRect.TopLeft);
  Result := Rect(P.X, P.Y, P.X + Selected.Width, P.Y + Selected.Height);
  InflateRect(Result, -HandleWidth div 2, -HandleWidth div 2);
end;

procedure TJvDesignHandles.SetHandleRects(const ARect: TRect);
var
  W: Integer;
begin
  W := HandleWidth;
  with ARect do
  begin
    Handles[0].BoundsRect := Rect(Left - W, Top - W, Right + W, Top);
    Handles[1].BoundsRect := Rect(Left - W, Top, Left, Bottom);
    Handles[2].BoundsRect := Rect(Right, Top, Right + W, Bottom);
    Handles[3].BoundsRect := Rect(Left - W, Bottom, Right + W, Bottom + W);
  end;
end;

//=== { TJvDesignSelector } ==================================================

constructor TJvDesignSelector.Create(ASurface: TJvDesignSurface);
begin
  inherited Create(ASurface);
  //ControllerClass := TJvDesignController;
  FHandleWidth := cJvDesignDefaultHandleWidth;
  FHandles := TObjectList.Create;
end;

destructor TJvDesignSelector.Destroy;
begin
  FHandles.Free;
  inherited Destroy;
end;

procedure TJvDesignSelector.SetHandleWidth(AValue: Integer);
begin
  FHandleWidth := AValue;
  Update;
end;

function TJvDesignSelector.GetCount: Integer;
begin
  Result := FHandles.Count;
end;

function TJvDesignSelector.GetHandles(AIndex: Integer): TJvDesignHandles;
begin
  Result := TJvDesignHandles(FHandles[AIndex]);
end;

procedure TJvDesignSelector.SetHandles(AIndex: Integer; AValue: TJvDesignHandles);
begin
  FHandles[AIndex] := AValue;
end;

function TJvDesignSelector.GetSelection(AIndex: Integer): TControl;
begin
  Result := Handles[AIndex].Selected;
end;

procedure TJvDesignSelector.SetSelection(AIndex: Integer; AValue: TControl);
begin
  Handles[AIndex].Selected := AValue;
end;

function TJvDesignSelector.FindHandles(AValue: TControl): TJvDesignHandles;
var
  I: Integer;
begin
  Result := nil;
  for I := 0 to Count - 1 do
  begin
    Result := Handles[I];
    if Result.Selected = AValue then
      Break
    else
      Result := nil;
  end;
end;

function TJvDesignSelector.IsSelected(AValue: TControl): Boolean;
begin
  Result := FindHandles(AValue) <> nil;
end;

procedure TJvDesignSelector.ClearSelection;
begin
  //if not (csDestroying in ComponentState) then
  FHandles.Clear;
end;

procedure TJvDesignSelector.ShowHideResizeHandles;
var
  I: Integer;
begin
  for I := 0 to Count - 1 do
    with Handles[I] do
    begin
      Resizeable := (Count = 1);
      RepaintHandles;
    end;
end;

procedure TJvDesignSelector.AddToSelection(AValue: TControl);
var
  H: TJvDesignHandles;
begin
  if (AValue is TControl) then
  begin

    if AValue = nil then
      raise EJVCLException.CreateRes(@RsEDesignCannotSelect);
    if not IsSelected(AValue) then
    begin
      H := TJvDesignHandles.Create(Self);
      H.Container := Surface.Container;
      H.Resizeable := Count = 0;
      FHandles.Add(H);
      H.Selected := AValue;
      if Count = 2 then
        ShowHideResizeHandles
      else
        H.UpdateHandles;
      Surface.Messenger.DesignComponent(H.Handles[0], True);
      Surface.Messenger.DesignComponent(H.Handles[1], True);
      Surface.Messenger.DesignComponent(H.Handles[2], True);
      Surface.Messenger.DesignComponent(H.Handles[3], True);
    end;

  end;
end;

procedure TJvDesignSelector.RemoveFromSelection(AValue: TControl);
begin
  if IsSelected(AValue) then
  begin
    FHandles.Remove(FindHandles(AValue));
    Surface.SelectionChange;
  end;
end;

function TJvDesignSelector.GetClientControl(AControl: TControl): TControl;
begin
  if AControl is TJvDesignHandle then
    Result := TJvDesignHandles(AControl.Owner).Selected
  else
    Result := AControl;
end;

procedure TJvDesignSelector.Update;
var
  I: Integer;
begin
  for I := 0 to Count - 1 do
    Handles[I].UpdateHandles;
end;

function TJvDesignSelector.GetHitHandle(AX, AY: Integer): TJvDesignHandleId;
begin
  if Count > 0 then
    Result := Handles[0].HitRect(AX, AY)
  else
    Result := dhNone;
end;

function TJvDesignSelector.GetCursor(AX, AY: Integer): TCursor;
const
  cCurs: array[TJvDesignHandleId] of TCursor =
   (crHandPoint, crSizeNWSE, crSizeNS, crSizeNESW, crSizeWE, crSizeWE,
    crSizeNESW, crSizeNS, crSizeNWSE);
begin
  Result := cCurs[GetHitHandle(AX, AY)];
end;

//=== { TJvDesignController } ================================================

procedure TJvDesignController.Action(AAction: TJvDesignAction);
begin
  with Surface do
    case AAction of
      daSelectParent:
        SelectParent;
      daDelete:
        DeleteComponents;
      daCopy:
        CopyComponents;
      daCut:
        CutComponents;
      daPaste:
        PasteComponents;
      daNudgeLeft:
        NudgeComponents(-1, 0);
      daNudgeRight:
        NudgeComponents(1, 0);
      daNudgeUp:
        NudgeComponents(0, -1);
      daNudgeDown:
        NudgeComponents(0, 1);
      daGrowWidth:
        GrowComponents(1, 0);
      daShrinkWidth:
        GrowComponents(-1, 0);
      daGrowHeight:
        GrowComponents(0, 1);
      daShrinkHeight:
        GrowComponents(0, -1);
    end;
  Surface.UpdateDesigner;
end;

function TJvDesignController.GetDragRect: TRect;
begin
  Result := FDragRect;
end;

function TJvDesignController.KeyDown(AKeyCode: Cardinal): Boolean;

  function CtrlKeys: Boolean;
  begin
    Result := True;
    case AKeyCode of
      VK_LEFT:
        Action(daNudgeLeft);
      VK_RIGHT:
        Action(daNudgeRight);
      VK_UP:
        Action(daNudgeUp);
      VK_DOWN:
        Action(daNudgeDown);
      else
        Result := False;
    end;
  end;

  function ShiftKeys: Boolean;
  begin
    Result := True;
    case AKeyCode of
      VK_LEFT:
        Action(daShrinkWidth);
      VK_RIGHT:
        Action(daGrowWidth);
      VK_UP:
        Action(daShrinkHeight);
      VK_DOWN:
        Action(daGrowHeight);
      else
        Result := False;
    end;
  end;

begin

  FKeyDownShift := GetKeyShiftState;
  if ssCtrl in FKeyDownShift then
    Result := CtrlKeys
  else
  if ssShift in FKeyDownShift then
    Result := ShiftKeys
  else
    Result := False;
end;

function TJvDesignController.KeyUp(AKeyCode: Cardinal): Boolean;

  function Keys: Boolean;
  begin
    Result := True;
    case AKeyCode of
      VK_ESCAPE:
        Action(daSelectParent);
      VK_DELETE:
        Action(daDelete);
      else
        Result := False;
    end;
  end;

  function CtrlKeys: Boolean;
  begin
    Result := True;
    case AKeyCode of
      Ord('C'):
        Action(daCopy);
      Ord('X'):
        Action(daCut);
      Ord('V'):
        Action(daPaste);
      else
        Result := False;
    end;
  end;

  function ShiftKeys: Boolean;
  begin
    Result := False;
  end;

begin
  FKeyDownShift := FKeyDownShift + GetKeyShiftState;
  if ssCtrl in FKeyDownShift then
    Result := CtrlKeys
  else
  if ssShift in FKeyDownShift then
    Result := ShiftKeys
  else
    Result := Keys;
  FKeyDownShift := [];
end;

function TJvDesignController.MouseDown(Button: TMouseButton; X, Y: Integer; TheMessage: TLMMouse): Boolean;
var
  HandleId: TJvDesignHandleId;

  procedure CaptureMouse;
  begin
    FMouseIsDown := True;
    Mouse.Capture := Surface.Container.Handle;
  end;

  procedure FocusSurface;
  var
    WasActive: Boolean;
  begin
    if not Surface.Container.Focused and Surface.Container.CanFocus then
    begin
      // Mantis 4732: deactivate the container otherwise SetFocus does not work
      // This bug apparently only happens under certain rare conditions
      // under windows but its fix does not seem to have any negative impact
      // on systems where it does not happen.
   //   WasActive := TJvDesignPanel(Surface.Container).Active;
   //   if WasActive then
   //     TJvDesignPanel(Surface.Container).Active := False;

      Surface.Container.SetFocus;

   //   if WasActive then
   //     TJvDesignPanel(Surface.Container).Active := True;
    end;
  end;

  procedure SelectDragMode;
  begin
    HandleId := dhNone;
    if ssCtrl in GetKeyShiftState then
      // Ctrl-drag selection has highest priority
      FDragMode := dmSelect
    else
    begin
      HandleId := Surface.GetHitHandle(X, Y);
      if HandleId <> dhNone then
      begin
        FClicked := Surface.Selection[0];
        FDragMode := dmResize;
      end
      else
      begin
        FClicked := Surface.FindControl(X, Y);
        if (FClicked = Surface.Container) or (FClicked is TJvDesignHandle) then
          FClicked := nil;
        Surface.GetAddClass;
        if Surface.AddClass <> '' then
          // then object creation
          FDragMode := dmCreate
        else
        if FClicked <> nil then
          // moving is last
          FDragMode := dmMove
        else
          // select by default
          FDragMode := dmSelect;
      end;
    end;
    if FClicked = nil then
      FClicked := Surface.Container;

    if fclicked.parent<>nil then
      FClicked.Parent.DisableAlign;
  end;

  procedure CreateMouseTool;
  begin
    case FDragMode of
      dmSelect, dmCreate:
        begin
          Surface.ClearSelection;
          FMouseTool := TJvDesignBander.Create(Surface);
        end;
      dmMove:
        begin
          if ssShift in GetKeyShiftState then
            Surface.Selector.AddToSelection(FClicked)
          else
          if not Surface.Selector.IsSelected(FClicked) then
            Surface.Select(FClicked);
          FMouseTool := TJvDesignMover.Create(Surface);
        end;
      dmResize:
        begin
          if not Surface.Selector.IsSelected(FClicked) then
            Surface.Select(FClicked);
          FMouseTool := TJvDesignSizer.CreateSizer(Surface, HandleId);
        end;
    end;
    if FMouseTool <> nil then
      FMouseTool.MouseDown(Button, GetKeyShiftState, X, Y);
  end;

begin
  {GetKeyShiftState := [];
  if (TheMessage.Keys and MK_Shift) = MK_Shift then
    Shift666 := Shift666 + [ssShift];
  if (TheMessage.Keys and MK_Control) = MK_Control then
    Shift666 := Shift666 + [ssCtrl];   }
 // shift666:=GetKeyShiftState;
  if (button=mbright) then
  begin
    Surface.ClearSelection;

    FClicked := Surface.FindControl(X, Y);
    if (FClicked = Surface.Container) or (FClicked is TJvDesignHandle) then
      FClicked := nil;

    Surface.Select(FClicked);

    Surface.SelectionChange;

    result:=true;
    exit;
  end;


  FocusSurface;
  CaptureMouse;
  SelectDragMode;

  CreateMouseTool;

  Result := True;
end;

function TJvDesignController.MouseMove(X, Y: Integer; TheMessage: TLMMouse): Boolean;
begin
 { Shift666 := [];
  if (TheMessage.Keys and MK_Shift) = MK_Shift then
    Shift666 := Shift666 + [ssShift];
  if (TheMessage.Keys and MK_Control) = MK_Control then
    Shift666 := Shift666 + [ssCtrl];}

  if not FMouseIsDown then
    SetCursor(Screen.Cursors[Surface.GetCursor(X, Y)])
  else
  begin
    if FMouseTool <> nil then
      FMouseTool.MouseMove(GetKeyShiftState, X, Y);
  end;
  Result := True;
end;

function TJvDesignController.MouseUp(Button: TMouseButton; X, Y: Integer; TheMessage: TLMMouse): Boolean;

  procedure ReleaseMouse;
  begin
    FMouseIsDown := False;
    Mouse.Capture := 0;
  end;

  procedure EnableAlign;
  begin
    // If the debugger breaks in during a mouse operation,
    // AlignDisabled can become stuck.
    // This routine is to aid debugging only.
    if (FClicked <> nil) and (FClicked.parent<>nil) then
      //cv while FClicked.Parent.AlignDisabled do
        FClicked.Parent.EnableAlign;
  end;

  procedure FinishMouseTool;
  begin
    if FMouseTool <> nil then
    try
      FMouseTool.MouseUp(Button, GetKeyShiftState, X, Y);
      FDragRect := DesignValidateRect(FMouseTool.DragRect);
      case FDragMode of
       // dmSelect:
       // begin
       //   if FClicked <> nil then
       //     Surface.Select(FClicked);
       // end;

        dmCreate:
          begin
            if FClicked <> nil then
              Surface.Select(FClicked);
            Surface.AddComponent;
          end;
        else
          Surface.SelectionChange;
      end;
    finally
      FreeAndNil(FMouseTool);
    end;
  end;

begin
  {Shift666 := [];
  if (TheMessage.Keys and MK_Shift) = MK_Shift then
    Shift666 := Shift666 + [ssShift];
  if (TheMessage.Keys and MK_Control) = MK_Control then
    Shift666 := Shift666 + [ssCtrl];      }

  if FMouseIsDown then
  begin
    ReleaseMouse;
    EnableAlign;
    FinishMouseTool;
    // We have to call UpdateDesigner for GraphicControls because they don't get
    // WM_WINDOWPOSCHANGED messages that update the designer handles.
    //CV LINUX if FClicked is TGraphicControl then
      Surface.UpdateDesigner;
    FClicked := nil;
  end;
  Result := True;
end;

//=== { TJvDesignMouseTool } =================================================

constructor TJvDesignMouseTool.Create(AOwner: TJvDesignSurface);
begin
  Surface := AOwner;
end;

function TJvDesignMouseTool.GetMouseDelta: TPoint;
const
  GridX = 4;
  GridY = 4;
begin
  with Result do
  begin
    X := FMouseLast.X - FMouseStart.X;
    Dec(X, X mod GridX);
    Y := FMouseLast.Y - FMouseStart.Y;
    Dec(Y, Y mod GridY);
  end;
end;

//=== { TJvDesignMover } =====================================================

constructor TJvDesignMover.Create(AOwner: TJvDesignSurface);
begin
  inherited Create(AOwner);
  SetLength(FDragRects, Surface.Count);
end;

procedure TJvDesignMover.CalcDragRects;
var
  Delta: TPoint;
  I: Integer;
begin
  Delta := GetMouseDelta;
  for I := 0 to Surface.Count - 1 do
    with Surface.Selection[I] do
    begin
      FDragRects[I] := BoundsRect;
      OffsetRect(FDragRects[I], Delta.X, Delta.Y);
    end;
end;

procedure TJvDesignMover.CalcPaintRects;
var
  I: Integer;
  ScreenPoint: TPoint;
begin


  CalcDragRects;
  for I := 0 to Surface.Count - 1 do
  begin
    with Surface.Selection[I] do
    begin
      if parent<>nil then
        ScreenPoint := Parent.ClientToScreen(Point(0, 0));
    end;
    OffsetRect(FDragRects[I], ScreenPoint.X, ScreenPoint.Y);
  end;
end;

procedure TJvDesignMover.PaintDragRects;
var
  I: Integer;
begin
  for I := 0 to Surface.Count - 1 do
    DesignPaintRubberbandRect(Surface.Container, FDragRects[I], psDot);
end;

procedure TJvDesignMover.ApplyDragRects;
var
  I: Integer;
begin
  if (GetMouseDelta.X <> 0) or (GetMouseDelta.Y <> 0) then
  begin
    CalcDragRects;
    for I := 0 to Surface.Count - 1 do
      Surface.Selection[I].BoundsRect := FDragRects[I];
    Surface.Change;
  end;
end;

procedure TJvDesignMover.MouseDown(Button: TMouseButton; Shift: TShiftState;
  X, Y: Integer);
begin
  FMouseStart := Point(X, Y);
  FMouseLast := FMouseStart;
  CalcPaintRects;
  PaintDragRects;
end;

procedure TJvDesignMover.MouseMove(Shift: TShiftState; X, Y: Integer);
begin
  PaintDragRects;
  FMouseLast := Point(X, Y);
  CalcPaintRects;
  PaintDragRects;
end;

procedure TJvDesignMover.MouseUp(Button: TMouseButton; Shift: TShiftState;
  X, Y: Integer);
begin
  PaintDragRects;
  FMouseLast := Point(X, Y);
  ApplyDragRects;
end;

//=== { TJvDesignBander } ====================================================

procedure TJvDesignBander.CalcDragRect;
begin
  with GetMouseDelta do
  begin
    DragRect := Rect(0, 0, X, Y);
    OffsetRect(FDragRect, FMouseStart.X, FMouseStart.Y);
  end;
end;

function TJvDesignBander.GetClient: TControl;
begin
  Result := Surface.Container;
end;

function TJvDesignBander.GetPaintRect: TRect;
var c: TControl;
begin
  Result := FDragRect;
  c:=GetClient;

  if c<>nil then
  begin
    with GetClient.ClientToScreen(Point(0, 0)) do
      OffsetRect(Result, X, Y);
  end;
end;

procedure TJvDesignBander.PaintDragRect;
begin
  DesignPaintRubberbandRect(Surface.Container, GetPaintRect, psDot);
end;

procedure TJvDesignBander.MouseDown(Button: TMouseButton; Shift: TShiftState;
  X, Y: Integer);
begin
  FMouseStart := Point(X, Y);
  FMouseLast := FMouseStart;
  CalcDragRect;
  PaintDragRect;
end;

procedure TJvDesignBander.MouseMove(Shift: TShiftState; X, Y: Integer);
begin
  PaintDragRect;
  FMouseLast := Point(X, Y);
  CalcDragRect;
  PaintDragRect;
end;

procedure TJvDesignBander.MouseUp(Button: TMouseButton; Shift: TShiftState;
  X, Y: Integer);
begin
  PaintDragRect;
  CalcDragRect;
end;

//=== { TJvDesignSizer } =====================================================

constructor TJvDesignSizer.CreateSizer(AOwner: TJvDesignSurface; AHandle: TJvDesignHandleId);
begin
  inherited Create(AOwner);
  FHandleId := AHandle;
end;

procedure TJvDesignSizer.ApplyMouseDelta(X, Y: Integer);
begin
  case FHandleId of
    dhLeftTop, dhMiddleTop, dhRightTop:
      Inc(FDragRect.Top, Y);
    dhLeftBottom, dhMiddleBottom, dhRightBottom:
      Inc(FDragRect.Bottom, Y);
  end;
  case FHandleId of
    dhLeftTop, dhLeftMiddle, dhLeftBottom:
      Inc(FDragRect.Left, X);
    dhRightTop, dhRightMiddle, dhRightBottom:
      Inc(FDragRect.Right, X);
  end;
end;

procedure TJvDesignSizer.CalcDragRect;
begin
  FDragRect := Surface.Selection[0].BoundsRect;
  with GetMouseDelta do
    ApplyMouseDelta(X, Y);
  FDragRect := DesignValidateRect(FDragRect);
end;

function TJvDesignSizer.GetClient: TControl;
begin
  Result := Surface.Selection[0].Parent;
end;

procedure TJvDesignSizer.ApplyDragRect;
begin
  Surface.Selection[0].BoundsRect := FDragRect;
  Surface.Change;
end;

procedure TJvDesignSizer.MouseUp(Button: TMouseButton; Shift: TShiftState;
  X, Y: Integer);
begin
  inherited MouseUp(Button, Shift, X, Y);
  ApplyDragRect;
end;

//=== { TJvDesignDesigner } ==================================================

constructor TJvDesignDesigner.Create(AMessenger: TJvDesignCustomMessenger);
begin
  inherited Create;
    DDC:=TDesignerDeviceContext.Create;
    FMessenger := AMessenger;
end;

function TJvDesignDesigner.GetCustomForm: TCustomForm;
begin
  Result := nil;
end;

function TJvDesignDesigner.GetIsControl: Boolean;
begin
  Result := False;
end;

function TJvDesignDesigner.GetRoot: TComponent;
begin
  Result := nil;
end;

function TJvDesignDesigner.IsDesignMsg(Sender: TControl; var Msg: TLMessage): Boolean;
begin
  Result := Messenger.IsDesignMessage(Sender, Msg);
end;

procedure TJvDesignDesigner.Modified;
begin
  //
end;

function TJvDesignDesigner.GetPropertyEditorHook: TPropertyEditorHook;
begin
  result:=nil;
end;

procedure TJvDesignDesigner.Notification(AComponent: TComponent; Operation: TOperation);
begin
  //messagebox(0,'a','a',0);
//  showmessage('n'); //
end;

function TJvDesignDesigner.DeleteSelection: boolean;
var a: TPersistentSelectionList;
  i: integer;
begin

  a:=TPersistentSelectionList.Create;
  GlobalDesignHook.GetSelection(a);

  for i:=0 to a.Count-1 do
  begin
    if (TPersistent(a.items[i]) is TCustomForm)=false then
      TPersistent(a.items[i]).free;
  end;


  a.free;

  FMessenger.Container.Update;

  if assigned(FMessenger.OnChange) then
    FMessenger.OnChange(self);

end;

procedure TJvDesignDesigner.PaintGrid;
begin

  DesignPaintGrid(tform(FMessenger.Container).Canvas, tform(FMessenger.Container).ClientRect);
end;

procedure TJvDesignDesigner.SetCustomForm(Value: TCustomForm);
begin
  //
end;

procedure TJvDesignDesigner.SetIsControl(Value: Boolean);
begin
  //
end;

function TJvDesignDesigner.UniqueName(const BaseName: string): string;
begin
  //
end;

procedure TJvDesignDesigner.ValidateRename(AComponent: TComponent;
  const CurName, NewName: string);
begin
  //
end;

{$IFDEF COMPILER9_UP}
procedure TJvDesignDesigner.PaintMenu;
begin
  //
end;
{$ENDIF COMPILER9_UP}

//=== { TJvDesignDesignerMessenger } =========================================

constructor TJvDesignDesignerMessenger.Create;
begin
  FDesigner := TJvDesignDesigner.Create(Self);
end;

destructor TJvDesignDesignerMessenger.Destroy;
begin
  if Container <> nil then
    DesignChildren(Container, False);
  if FDesignedForm <> nil then
    FDesignedForm.Designer := nil;
  FDesigner.Free;
  inherited Destroy;
end;

type
  TAccessComponent = class(TComponent);

procedure TJvDesignDesignerMessenger.SetComponentDesigning(AComponent: TComponent; ADesigning: Boolean);
begin
  TAccessComponent(AComponent).SetDesigning(ADesigning);
end;

procedure TJvDesignDesignerMessenger.UndesignComponent(AComponent: TComponent);
begin
  SetComponentDesigning(AComponent, False);
end;

procedure TJvDesignDesignerMessenger.DesignComponent(AComponent: TComponent; ADesigning: Boolean);
begin
  SetComponentDesigning(AComponent, ADesigning);
end;

procedure TJvDesignDesignerMessenger.SetContainer(AValue: TWinControl);

  function FindParentForm: TCustomForm;
  var
    P: TWinControl;
  begin
    P := Container;
    while P.Parent <> nil do
      P := P.Parent;
    if not (P is TCustomForm) then
      raise EJVCLException.CreateResFmt(@RsEOldestFmt , [ClassName]);
    Result := TCustomForm(P);
  end;

begin
  inherited SetContainer(AValue);
  if Container <> nil then
  begin
    FDesignedForm := FindParentForm;
    FDesignedForm.Designer := FDesigner;
    DesignChildren(Container, True);
  end;
end;

//=== { TJvDesignMessageHookList } ===========================================

constructor TJvDesignMessageHookList.Create(AUser: TJvDesignCustomMessenger);
begin
  inherited Create(nil);
  FUser := AUser;
  FHooks := TObjectList.Create;
  FHooks.OwnsObjects := True;
end;

destructor TJvDesignMessageHookList.Destroy;
begin
  FHooks.Free;
  inherited Destroy;
end;

procedure TJvDesignMessageHookList.Clear;
begin
  FHooks.Clear;
end;

procedure TJvDesignMessageHookList.Hook(AClient: TWinControl);
begin
  AClient.FreeNotification(Self);
  FHooks.Add(TJvDesignMessageHook.Create(FUser, AClient));
end;

procedure TJvDesignMessageHookList.Unhook(AComponent: TComponent);
var
  I: Integer;
begin
  for I := 0 to FHooks.Count - 1 do
    if TJvDesignMessageHook(FHooks[I]).Client = AComponent then
    begin
      FHooks.Delete(I);
      Break;
    end;
end;

procedure TJvDesignMessageHookList.Notification(AComponent: TComponent;
  Operation: TOperation);
begin
  inherited Notification(AComponent, Operation);
  if Operation = opRemove then
    Unhook(AComponent);
end;

//=== { TJvDesignWinControlHookMessenger } ===================================

constructor TJvDesignWinControlHookMessenger.Create;
begin
  inherited Create;
  FHooks := TJvDesignMessageHookList.Create(Self);
end;

destructor TJvDesignWinControlHookMessenger.Destroy;
begin
  FHooks.Free;
  inherited Destroy;
end;

procedure TJvDesignWinControlHookMessenger.Clear;
begin
  FHooks.Clear;
end;

procedure TJvDesignWinControlHookMessenger.DesignComponent(AComponent: TComponent; ADesigning: Boolean);
begin
  if (AComponent is TWinControl) then
    if ADesigning then
      HookWinControl(TWinControl(AComponent))
    else
      UnhookWinControl(TWinControl(AComponent))
end;

procedure TJvDesignWinControlHookMessenger.HookWinControl(AWinControl: TWinControl);
begin
  FHooks.Hook(AWinControl);
  DesignChildren(AWinControl, True);
end;

procedure TJvDesignWinControlHookMessenger.UnhookWinControl(AWinControl: TWinControl);
begin
  FHooks.Unhook(AWinControl);
  DesignChildren(AWinControl, False);
end;

procedure TJvDesignWinControlHookMessenger.SetContainer(AValue: TWinControl);
begin
  inherited SetContainer(AValue);
  if Container <> nil then
    DesignChildren(Container, True);
end;

initialization
  {$IFDEF UNITVERSIONING}
  RegisterUnitVersion(HInstance, UnitVersioning);
  {$ENDIF UNITVERSIONING}

finalization
  FreeShadedBits;
  {$IFDEF UNITVERSIONING}
  UnregisterUnitVersion(HInstance);
  {$ENDIF UNITVERSIONING}

end.