--- nav_order: 2 --- # Getting Started {: .no_toc } 1. TOC {:toc} ## On Fedora CoreOS or RHEL CoreOS coreos-installer is included in Fedora CoreOS and RHEL CoreOS. Just run `coreos-installer` from the command line. Fedora CoreOS provides [live CD and network boot images](https://getfedora.org/coreos/download/) you can run from RAM; you can use these to run coreos-installer to install Fedora CoreOS or RHEL CoreOS to disk. ## Run from a container You can run coreos-installer from a container. You'll need to bind-mount `/dev` and `/run/udev`, as well as a data directory if you want to access files in the host. For example: ```sh sudo podman run --pull=always --privileged --rm \ -v /dev:/dev -v /run/udev:/run/udev -v .:/data -w /data \ quay.io/coreos/coreos-installer:release \ install /dev/vdb -i config.ign ``` ## Via a Fedora RPM `coreos-installer` is packaged in Fedora: ```sh sudo dnf install coreos-installer ``` Note in fact you can also do this inside a `podman run --privileged` type container configured similarly to the above for the "pre-built container" path, not necessarily the host's root filesystem. See also [toolbox](https://github.com/containers/toolbox). ## Install with Cargo You can also install just the coreos-installer binary with Rust's Cargo package manager: ```sh cargo install coreos-installer ``` ## Build and install from source tree To build from the source tree: ```sh make ``` To install the binary and systemd units to a target rootfs (e.g. under a [coreos-assembler](https://github.com/coreos/coreos-assembler) workdir): ```sh make install DESTDIR=/my/dest/dir ``` ## Run from a live image using kernel command-line options If you want a fully automated install, you can configure the Fedora CoreOS live CD or netboot image to run coreos-installer and then reboot the system. You do this by passing `coreos.inst.` arguments on the kernel command line. ### Kernel command line options for coreos-installer running as a service * `coreos.inst.install_dev` - The block device on the system to install to, such as `/dev/sda`. Mandatory. * `coreos.inst.stream` - Download and install the current release of Fedora CoreOS from the specified stream. Optional; defaults to installing from local media if run from CoreOS live ISO or PXE media, and to `stable` on other systems. * `coreos.inst.image_url` - Download and install the specified CoreOS image, overriding `coreos.inst.stream`. Optional. * `coreos.inst.ignition_url` - The URL of the Ignition config. Optional. If missing, no Ignition config will be embedded, which is probably not what you want. * `coreos.inst.platform_id` - The Ignition platform ID of the platform the CoreOS image is being installed on. Optional; defaults to `metal`. Normally this should be specified only if installing inside a virtual machine. * `coreos.inst.save_partlabel` - Comma-separated labels of partitions to preserve during the install. Glob-style wildcards are permitted. The specified partitions need not exist. Optional. * `coreos.inst.save_partindex` - Comma-separated indexes of partitions to preserve during the install. Ranges (`m-n`) are permitted, and either `m` or `n` can be omitted. The specified partitions need not exist. Optional. * `coreos.inst.insecure` - Permit the OS image to be unsigned. Optional. * `coreos.inst.skip_reboot` - Don't reboot after installing. Optional. ### Installing from ISO Download a Fedora CoreOS ISO image: ``` podman run --security-opt label=disable --pull=always --rm -v .:/data -w /data \ quay.io/coreos/coreos-installer:release download -f iso ``` The ISO image can install in either legacy boot (BIOS) mode or in UEFI mode. You can boot it in either mode, regardless of what mode the OS will boot from once installed. Burn the ISO to disk and boot it, or use ISO redirection via a LOM interface. Alternatively you can use a VM like so: ``` virt-install --name cdrom --ram 4500 --vcpus 2 --disk size=20 --accelerate \ --cdrom /path/to/fedora-coreos-32.20200809.2.1-live.x86_64.iso --network default ``` Alternatively you can use `qemu` directly. Create a disk image to use as install target: ``` qemu-img create -f qcow2 fcos.qcow2 8G ``` Now, run the following qemu command: ``` qemu-system-x86_64 -accel kvm -name fcos -m 4500 -cpu host -smp 2 \ -netdev user,id=eth0,hostname=coreos -device virtio-net-pci,netdev=eth0 \ -drive file=/path/to/fcos.qcow2,format=qcow2 \ -cdrom /path/to/fedora-coreos-32.20200809.2.1-live.x86_64.iso ``` Once you have reached the boot menu, press `` (isolinux) or `e` (grub) to edit the kernel command line. Add the parameters to the kernel command line telling it what you want it to do. For example: - `coreos.inst.install_dev=/dev/sda` - `coreos.inst.ignition_url=http://example.com/config.ign` Now press `` (isolinux) or `` (grub) to kick off the install. The install will complete and eventually reboot the machine. After reboot the machine will boot into the installed system and the embedded Ignition config will run on first boot. ### Installing from PXE Download a Fedora CoreOS PXE kernel, initramfs, and rootfs image: ``` podman run --security-opt label=disable --pull=always --rm -v .:/data -w /data \ quay.io/coreos/coreos-installer:release download -f pxe ``` The PXE image can install in either legacy boot (BIOS) mode or in UEFI mode. You can boot it in either mode, regardless of what mode the OS will boot from once installed. Here is an example `pxelinux.cfg` for booting the installer images with PXELINUX: ``` DEFAULT pxeboot TIMEOUT 20 PROMPT 0 LABEL pxeboot KERNEL fedora-coreos-32.20200809.2.1-live-kernel-x86_64 APPEND initrd=fedora-coreos-32.20200809.2.1-live-initramfs.x86_64.img,fedora-coreos-32.20200809.2.1-live-rootfs.x86_64.img coreos.inst.install_dev=/dev/sda coreos.inst.ignition_url=http://192.168.1.101:8000/config.ign IPAPPEND 2 ``` If you don't know how to use this information to test a PXE install you can start with something like [these instructions](https://dustymabe.com/2019/01/04/easy-pxe-boot-testing-with-only-http-using-ipxe-and-libvirt/) for testing out PXE installs via a local VM + libvirt.