// Copyright 2022 Google LLC
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

syntax = "proto3";

package google.spanner.v1;

import "google/protobuf/duration.proto";
import "google/protobuf/timestamp.proto";

option csharp_namespace = "Google.Cloud.Spanner.V1";
option go_package = "google.golang.org/genproto/googleapis/spanner/v1;spanner";
option java_multiple_files = true;
option java_outer_classname = "TransactionProto";
option java_package = "com.google.spanner.v1";
option php_namespace = "Google\\Cloud\\Spanner\\V1";
option ruby_package = "Google::Cloud::Spanner::V1";

// Transactions:
//
// Each session can have at most one active transaction at a time (note that
// standalone reads and queries use a transaction internally and do count
// towards the one transaction limit). After the active transaction is
// completed, the session can immediately be re-used for the next transaction.
// It is not necessary to create a new session for each transaction.
//
// Transaction modes:
//
// Cloud Spanner supports three transaction modes:
//
//   1. Locking read-write. This type of transaction is the only way
//      to write data into Cloud Spanner. These transactions rely on
//      pessimistic locking and, if necessary, two-phase commit.
//      Locking read-write transactions may abort, requiring the
//      application to retry.
//
//   2. Snapshot read-only. Snapshot read-only transactions provide guaranteed
//      consistency across several reads, but do not allow
//      writes. Snapshot read-only transactions can be configured to read at
//      timestamps in the past, or configured to perform a strong read
//      (where Spanner will select a timestamp such that the read is
//      guaranteed to see the effects of all transactions that have committed
//      before the start of the read). Snapshot read-only transactions do not
//      need to be committed.
//
//      Queries on change streams must be performed with the snapshot read-only
//      transaction mode, specifying a strong read. Please see
//      [TransactionOptions.ReadOnly.strong][google.spanner.v1.TransactionOptions.ReadOnly.strong]
//      for more details.
//
//   3. Partitioned DML. This type of transaction is used to execute
//      a single Partitioned DML statement. Partitioned DML partitions
//      the key space and runs the DML statement over each partition
//      in parallel using separate, internal transactions that commit
//      independently. Partitioned DML transactions do not need to be
//      committed.
//
// For transactions that only read, snapshot read-only transactions
// provide simpler semantics and are almost always faster. In
// particular, read-only transactions do not take locks, so they do
// not conflict with read-write transactions. As a consequence of not
// taking locks, they also do not abort, so retry loops are not needed.
//
// Transactions may only read-write data in a single database. They
// may, however, read-write data in different tables within that
// database.
//
// Locking read-write transactions:
//
// Locking transactions may be used to atomically read-modify-write
// data anywhere in a database. This type of transaction is externally
// consistent.
//
// Clients should attempt to minimize the amount of time a transaction
// is active. Faster transactions commit with higher probability
// and cause less contention. Cloud Spanner attempts to keep read locks
// active as long as the transaction continues to do reads, and the
// transaction has not been terminated by
// [Commit][google.spanner.v1.Spanner.Commit] or
// [Rollback][google.spanner.v1.Spanner.Rollback]. Long periods of
// inactivity at the client may cause Cloud Spanner to release a
// transaction's locks and abort it.
//
// Conceptually, a read-write transaction consists of zero or more
// reads or SQL statements followed by
// [Commit][google.spanner.v1.Spanner.Commit]. At any time before
// [Commit][google.spanner.v1.Spanner.Commit], the client can send a
// [Rollback][google.spanner.v1.Spanner.Rollback] request to abort the
// transaction.
//
// Semantics:
//
// Cloud Spanner can commit the transaction if all read locks it acquired
// are still valid at commit time, and it is able to acquire write
// locks for all writes. Cloud Spanner can abort the transaction for any
// reason. If a commit attempt returns `ABORTED`, Cloud Spanner guarantees
// that the transaction has not modified any user data in Cloud Spanner.
//
// Unless the transaction commits, Cloud Spanner makes no guarantees about
// how long the transaction's locks were held for. It is an error to
// use Cloud Spanner locks for any sort of mutual exclusion other than
// between Cloud Spanner transactions themselves.
//
// Retrying aborted transactions:
//
// When a transaction aborts, the application can choose to retry the
// whole transaction again. To maximize the chances of successfully
// committing the retry, the client should execute the retry in the
// same session as the original attempt. The original session's lock
// priority increases with each consecutive abort, meaning that each
// attempt has a slightly better chance of success than the previous.
//
// Under some circumstances (for example, many transactions attempting to
// modify the same row(s)), a transaction can abort many times in a
// short period before successfully committing. Thus, it is not a good
// idea to cap the number of retries a transaction can attempt;
// instead, it is better to limit the total amount of time spent
// retrying.
//
// Idle transactions:
//
// A transaction is considered idle if it has no outstanding reads or
// SQL queries and has not started a read or SQL query within the last 10
// seconds. Idle transactions can be aborted by Cloud Spanner so that they
// don't hold on to locks indefinitely. If an idle transaction is aborted, the
// commit will fail with error `ABORTED`.
//
// If this behavior is undesirable, periodically executing a simple
// SQL query in the transaction (for example, `SELECT 1`) prevents the
// transaction from becoming idle.
//
// Snapshot read-only transactions:
//
// Snapshot read-only transactions provides a simpler method than
// locking read-write transactions for doing several consistent
// reads. However, this type of transaction does not support writes.
//
// Snapshot transactions do not take locks. Instead, they work by
// choosing a Cloud Spanner timestamp, then executing all reads at that
// timestamp. Since they do not acquire locks, they do not block
// concurrent read-write transactions.
//
// Unlike locking read-write transactions, snapshot read-only
// transactions never abort. They can fail if the chosen read
// timestamp is garbage collected; however, the default garbage
// collection policy is generous enough that most applications do not
// need to worry about this in practice.
//
// Snapshot read-only transactions do not need to call
// [Commit][google.spanner.v1.Spanner.Commit] or
// [Rollback][google.spanner.v1.Spanner.Rollback] (and in fact are not
// permitted to do so).
//
// To execute a snapshot transaction, the client specifies a timestamp
// bound, which tells Cloud Spanner how to choose a read timestamp.
//
// The types of timestamp bound are:
//
//   - Strong (the default).
//   - Bounded staleness.
//   - Exact staleness.
//
// If the Cloud Spanner database to be read is geographically distributed,
// stale read-only transactions can execute more quickly than strong
// or read-write transactions, because they are able to execute far
// from the leader replica.
//
// Each type of timestamp bound is discussed in detail below.
//
// Strong: Strong reads are guaranteed to see the effects of all transactions
// that have committed before the start of the read. Furthermore, all
// rows yielded by a single read are consistent with each other -- if
// any part of the read observes a transaction, all parts of the read
// see the transaction.
//
// Strong reads are not repeatable: two consecutive strong read-only
// transactions might return inconsistent results if there are
// concurrent writes. If consistency across reads is required, the
// reads should be executed within a transaction or at an exact read
// timestamp.
//
// Queries on change streams (see below for more details) must also specify
// the strong read timestamp bound.
//
// See
// [TransactionOptions.ReadOnly.strong][google.spanner.v1.TransactionOptions.ReadOnly.strong].
//
// Exact staleness:
//
// These timestamp bounds execute reads at a user-specified
// timestamp. Reads at a timestamp are guaranteed to see a consistent
// prefix of the global transaction history: they observe
// modifications done by all transactions with a commit timestamp less than or
// equal to the read timestamp, and observe none of the modifications done by
// transactions with a larger commit timestamp. They will block until
// all conflicting transactions that may be assigned commit timestamps
// <= the read timestamp have finished.
//
// The timestamp can either be expressed as an absolute Cloud Spanner commit
// timestamp or a staleness relative to the current time.
//
// These modes do not require a "negotiation phase" to pick a
// timestamp. As a result, they execute slightly faster than the
// equivalent boundedly stale concurrency modes. On the other hand,
// boundedly stale reads usually return fresher results.
//
// See
// [TransactionOptions.ReadOnly.read_timestamp][google.spanner.v1.TransactionOptions.ReadOnly.read_timestamp]
// and
// [TransactionOptions.ReadOnly.exact_staleness][google.spanner.v1.TransactionOptions.ReadOnly.exact_staleness].
//
// Bounded staleness:
//
// Bounded staleness modes allow Cloud Spanner to pick the read timestamp,
// subject to a user-provided staleness bound. Cloud Spanner chooses the
// newest timestamp within the staleness bound that allows execution
// of the reads at the closest available replica without blocking.
//
// All rows yielded are consistent with each other -- if any part of
// the read observes a transaction, all parts of the read see the
// transaction. Boundedly stale reads are not repeatable: two stale
// reads, even if they use the same staleness bound, can execute at
// different timestamps and thus return inconsistent results.
//
// Boundedly stale reads execute in two phases: the first phase
// negotiates a timestamp among all replicas needed to serve the
// read. In the second phase, reads are executed at the negotiated
// timestamp.
//
// As a result of the two phase execution, bounded staleness reads are
// usually a little slower than comparable exact staleness
// reads. However, they are typically able to return fresher
// results, and are more likely to execute at the closest replica.
//
// Because the timestamp negotiation requires up-front knowledge of
// which rows will be read, it can only be used with single-use
// read-only transactions.
//
// See
// [TransactionOptions.ReadOnly.max_staleness][google.spanner.v1.TransactionOptions.ReadOnly.max_staleness]
// and
// [TransactionOptions.ReadOnly.min_read_timestamp][google.spanner.v1.TransactionOptions.ReadOnly.min_read_timestamp].
//
// Old read timestamps and garbage collection:
//
// Cloud Spanner continuously garbage collects deleted and overwritten data
// in the background to reclaim storage space. This process is known
// as "version GC". By default, version GC reclaims versions after they
// are one hour old. Because of this, Cloud Spanner cannot perform reads
// at read timestamps more than one hour in the past. This
// restriction also applies to in-progress reads and/or SQL queries whose
// timestamp become too old while executing. Reads and SQL queries with
// too-old read timestamps fail with the error `FAILED_PRECONDITION`.
//
// You can configure and extend the `VERSION_RETENTION_PERIOD` of a
// database up to a period as long as one week, which allows Cloud Spanner
// to perform reads up to one week in the past.
//
// Querying change Streams:
//
// A Change Stream is a schema object that can be configured to watch data
// changes on the entire database, a set of tables, or a set of columns
// in a database.
//
// When a change stream is created, Spanner automatically defines a
// corresponding SQL Table-Valued Function (TVF) that can be used to query
// the change records in the associated change stream using the
// ExecuteStreamingSql API. The name of the TVF for a change stream is
// generated from the name of the change stream: READ_<change_stream_name>.
//
// All queries on change stream TVFs must be executed using the
// ExecuteStreamingSql API with a single-use read-only transaction with a
// strong read-only timestamp_bound. The change stream TVF allows users to
// specify the start_timestamp and end_timestamp for the time range of
// interest. All change records within the retention period is accessible
// using the strong read-only timestamp_bound. All other TransactionOptions
// are invalid for change stream queries.
//
// In addition, if TransactionOptions.read_only.return_read_timestamp is set
// to true, a special value of 2^63 - 2 will be returned in the
// [Transaction][google.spanner.v1.Transaction] message that describes the
// transaction, instead of a valid read timestamp. This special value should be
// discarded and not used for any subsequent queries.
//
// Please see https://cloud.google.com/spanner/docs/change-streams
// for more details on how to query the change stream TVFs.
//
// Partitioned DML transactions:
//
// Partitioned DML transactions are used to execute DML statements with a
// different execution strategy that provides different, and often better,
// scalability properties for large, table-wide operations than DML in a
// ReadWrite transaction. Smaller scoped statements, such as an OLTP workload,
// should prefer using ReadWrite transactions.
//
// Partitioned DML partitions the keyspace and runs the DML statement on each
// partition in separate, internal transactions. These transactions commit
// automatically when complete, and run independently from one another.
//
// To reduce lock contention, this execution strategy only acquires read locks
// on rows that match the WHERE clause of the statement. Additionally, the
// smaller per-partition transactions hold locks for less time.
//
// That said, Partitioned DML is not a drop-in replacement for standard DML used
// in ReadWrite transactions.
//
//  - The DML statement must be fully-partitionable. Specifically, the statement
//    must be expressible as the union of many statements which each access only
//    a single row of the table.
//
//  - The statement is not applied atomically to all rows of the table. Rather,
//    the statement is applied atomically to partitions of the table, in
//    independent transactions. Secondary index rows are updated atomically
//    with the base table rows.
//
//  - Partitioned DML does not guarantee exactly-once execution semantics
//    against a partition. The statement will be applied at least once to each
//    partition. It is strongly recommended that the DML statement should be
//    idempotent to avoid unexpected results. For instance, it is potentially
//    dangerous to run a statement such as
//    `UPDATE table SET column = column + 1` as it could be run multiple times
//    against some rows.
//
//  - The partitions are committed automatically - there is no support for
//    Commit or Rollback. If the call returns an error, or if the client issuing
//    the ExecuteSql call dies, it is possible that some rows had the statement
//    executed on them successfully. It is also possible that statement was
//    never executed against other rows.
//
//  - Partitioned DML transactions may only contain the execution of a single
//    DML statement via ExecuteSql or ExecuteStreamingSql.
//
//  - If any error is encountered during the execution of the partitioned DML
//    operation (for instance, a UNIQUE INDEX violation, division by zero, or a
//    value that cannot be stored due to schema constraints), then the
//    operation is stopped at that point and an error is returned. It is
//    possible that at this point, some partitions have been committed (or even
//    committed multiple times), and other partitions have not been run at all.
//
// Given the above, Partitioned DML is good fit for large, database-wide,
// operations that are idempotent, such as deleting old rows from a very large
// table.
message TransactionOptions {
  // Message type to initiate a read-write transaction. Currently this
  // transaction type has no options.
  message ReadWrite {
    // `ReadLockMode` is used to set the read lock mode for read-write
    // transactions.
    enum ReadLockMode {
      // Default value.
      //
      // If the value is not specified, the pessimistic read lock is used.
      READ_LOCK_MODE_UNSPECIFIED = 0;

      // Pessimistic lock mode.
      //
      // Read locks are acquired immediately on read.
      PESSIMISTIC = 1;

      // Optimistic lock mode.
      //
      // Locks for reads within the transaction are not acquired on read.
      // Instead the locks are acquired on a commit to validate that
      // read/queried data has not changed since the transaction started.
      OPTIMISTIC = 2;
    }

    // Read lock mode for the transaction.
    ReadLockMode read_lock_mode = 1;
  }

  // Message type to initiate a Partitioned DML transaction.
  message PartitionedDml {}

  // Message type to initiate a read-only transaction.
  message ReadOnly {
    // How to choose the timestamp for the read-only transaction.
    oneof timestamp_bound {
      // Read at a timestamp where all previously committed transactions
      // are visible.
      bool strong = 1;

      // Executes all reads at a timestamp >= `min_read_timestamp`.
      //
      // This is useful for requesting fresher data than some previous
      // read, or data that is fresh enough to observe the effects of some
      // previously committed transaction whose timestamp is known.
      //
      // Note that this option can only be used in single-use transactions.
      //
      // A timestamp in RFC3339 UTC \"Zulu\" format, accurate to nanoseconds.
      // Example: `"2014-10-02T15:01:23.045123456Z"`.
      google.protobuf.Timestamp min_read_timestamp = 2;

      // Read data at a timestamp >= `NOW - max_staleness`
      // seconds. Guarantees that all writes that have committed more
      // than the specified number of seconds ago are visible. Because
      // Cloud Spanner chooses the exact timestamp, this mode works even if
      // the client's local clock is substantially skewed from Cloud Spanner
      // commit timestamps.
      //
      // Useful for reading the freshest data available at a nearby
      // replica, while bounding the possible staleness if the local
      // replica has fallen behind.
      //
      // Note that this option can only be used in single-use
      // transactions.
      google.protobuf.Duration max_staleness = 3;

      // Executes all reads at the given timestamp. Unlike other modes,
      // reads at a specific timestamp are repeatable; the same read at
      // the same timestamp always returns the same data. If the
      // timestamp is in the future, the read will block until the
      // specified timestamp, modulo the read's deadline.
      //
      // Useful for large scale consistent reads such as mapreduces, or
      // for coordinating many reads against a consistent snapshot of the
      // data.
      //
      // A timestamp in RFC3339 UTC \"Zulu\" format, accurate to nanoseconds.
      // Example: `"2014-10-02T15:01:23.045123456Z"`.
      google.protobuf.Timestamp read_timestamp = 4;

      // Executes all reads at a timestamp that is `exact_staleness`
      // old. The timestamp is chosen soon after the read is started.
      //
      // Guarantees that all writes that have committed more than the
      // specified number of seconds ago are visible. Because Cloud Spanner
      // chooses the exact timestamp, this mode works even if the client's
      // local clock is substantially skewed from Cloud Spanner commit
      // timestamps.
      //
      // Useful for reading at nearby replicas without the distributed
      // timestamp negotiation overhead of `max_staleness`.
      google.protobuf.Duration exact_staleness = 5;
    }

    // If true, the Cloud Spanner-selected read timestamp is included in
    // the [Transaction][google.spanner.v1.Transaction] message that describes
    // the transaction.
    bool return_read_timestamp = 6;
  }

  // Required. The type of transaction.
  oneof mode {
    // Transaction may write.
    //
    // Authorization to begin a read-write transaction requires
    // `spanner.databases.beginOrRollbackReadWriteTransaction` permission
    // on the `session` resource.
    ReadWrite read_write = 1;

    // Partitioned DML transaction.
    //
    // Authorization to begin a Partitioned DML transaction requires
    // `spanner.databases.beginPartitionedDmlTransaction` permission
    // on the `session` resource.
    PartitionedDml partitioned_dml = 3;

    // Transaction will not write.
    //
    // Authorization to begin a read-only transaction requires
    // `spanner.databases.beginReadOnlyTransaction` permission
    // on the `session` resource.
    ReadOnly read_only = 2;
  }
}

// A transaction.
message Transaction {
  // `id` may be used to identify the transaction in subsequent
  // [Read][google.spanner.v1.Spanner.Read],
  // [ExecuteSql][google.spanner.v1.Spanner.ExecuteSql],
  // [Commit][google.spanner.v1.Spanner.Commit], or
  // [Rollback][google.spanner.v1.Spanner.Rollback] calls.
  //
  // Single-use read-only transactions do not have IDs, because
  // single-use transactions do not support multiple requests.
  bytes id = 1;

  // For snapshot read-only transactions, the read timestamp chosen
  // for the transaction. Not returned by default: see
  // [TransactionOptions.ReadOnly.return_read_timestamp][google.spanner.v1.TransactionOptions.ReadOnly.return_read_timestamp].
  //
  // A timestamp in RFC3339 UTC \"Zulu\" format, accurate to nanoseconds.
  // Example: `"2014-10-02T15:01:23.045123456Z"`.
  google.protobuf.Timestamp read_timestamp = 2;
}

// This message is used to select the transaction in which a
// [Read][google.spanner.v1.Spanner.Read] or
// [ExecuteSql][google.spanner.v1.Spanner.ExecuteSql] call runs.
//
// See [TransactionOptions][google.spanner.v1.TransactionOptions] for more
// information about transactions.
message TransactionSelector {
  // If no fields are set, the default is a single use transaction
  // with strong concurrency.
  oneof selector {
    // Execute the read or SQL query in a temporary transaction.
    // This is the most efficient way to execute a transaction that
    // consists of a single SQL query.
    TransactionOptions single_use = 1;

    // Execute the read or SQL query in a previously-started transaction.
    bytes id = 2;

    // Begin a new transaction and execute this read or SQL query in
    // it. The transaction ID of the new transaction is returned in
    // [ResultSetMetadata.transaction][google.spanner.v1.ResultSetMetadata.transaction],
    // which is a [Transaction][google.spanner.v1.Transaction].
    TransactionOptions begin = 3;
  }
}