# Whether to generate a package for the binary crate. If omitted, defaults to
# true unless semver_suffix (see below) is also true.
#bin = true

# Name for the binary crate. Defaults to "<default>" which means the crate
# name, with no "rust-" prefix and with underscores replaced by hyphens.
#bin_name = "<default>"

# Add the semver to the package name, to allow co-installation with other
# versions of the same crate. This should only be true for crates older than
# the most up-to-date version in Debian, and only if they are needed as a
# (direct or indirect) build dependency of another binary crate.
#
# If you set this to true, you should either omit "bin" or set it to false,
# unless you are sure the old and new packages are co-installable.
#semver_suffix = false

# Overlay directory to copy on top of the generated one, given relative to the
# directory that contains this config file. If any files conflict with the ones
# generated by debcargo, the latter are moved to <file>.debcargo.hint instead.
#
# For the special case of debian/changelog, generated entries will be prepended
# to the top of the existing d/changelog (from the overlay), rather than stored
# in debian/changelog.debcargo.hint. A further exception: if the distribution
# of the top entry in the existing d/changelog is
# UNRELEASED-FIXME-AUTOGENERATED-DEBCARGO then that whole entry will be
# *replaced* with the generated entry, not prepended.
#
# Normally, any "hints" generated are written back to the overlay directory,
# overwriting any hints that may have previously been stored there. For the
# special case of debian/changelog, that is written-back as-is. Therefore, it
# is strongly recommended that you keep the overlay directory tracked in
# version control. To disable this behaviour, give --no-overlay-write-back on
# the debcargo command line.
#
#overlay = "."

# Local directory where crate can be found, instead of crates.io. Resolved
# relative to the directory that contains this config file. Note: this is
# currently experimental and only works for crates whose dependencies are all
# published on crates.io. For example, not rustup. This limitation will
# hopefully be fixed in the future.
#
#crate_src_path = "../.."

# Paths from the crate tarball, to exclude from the orig tarball.
# See https://docs.rs/glob/latest/glob/struct.Pattern.html for syntax
#excludes = ["libgit2/**"]

# Paths from the crate tarball, that have been manually reviewed to adhere to
# Debian policy. debcargo has a crude method for detecting files that might not
# fit within policy, and will give a fatal error if any are detected. In the
# exceptional cases where the method gives a false-positive, add them here.
#whitelist = ["libgit2/**"]

# Whether to allow prerelease deps, by rewriting these to the released version.
# This should only be enabled for certain crates if really necessary, and first
# you should check that they can actually build when this is enabled.
#allow_prerelease_deps = false

# This is the stem of the short description for each binary package. By default
# `debcargo` will try to auto-extract a description from `Cargo.toml` but
# sometimes this may lead to a meaningless, weird short description.
#
# The full short description of each binary package is constructed using this
# string plus an auto-generated suffix. The full string can be overridden by
# the [packages.KEY].summary config key, see below.
#summary = "PLACEHOLDER"

# This is the stem of the long description for each binary package. By default
# this is empty.
#
# The full long description of each binary package is constructed using this
# string plus an auto-generated suffix. The full string can be overridden by
# the [packages.KEY].description config key, see below.
#description = """
#PLACEHOLDER
#"""

# Maintainer
#
# Defaults to pkg-rust-team, should only be overriden with care. If overridden,
# vcs_* in [source] should also be overridden, otherwise they point the Rust
# Team's salsa project.
#
#maintainer = "PLACEHOLDER"

# Uploaders. This affects the Uploaders: field in debian/control as well as the
# additional maintainers listed in debian/copyright. The naming is historical;
# in Debian today for team-maintained packages, this is generally taken to mean
# "the main individuals" responsible for the package - anyone on the team is
# "morally allowed" to perform the upload as long as they specify "Team upload"
# in debian/changelog; this is done automatically by debcargo.
uploaders = [ "foo bar <foo@debian.org>" ]

# This is a temporary work-around in order to address situations where certain
# Debian infrastructure people claim (without supplying concrete evidence) that
# rust crate metadata is "too large". This flag addresses this, effectively by
# forcing all crate features together into a single feature. This increases the
# dependency footprint of the generated packages and therefore should not be
# enabled unless absolutely necessary. It can also cause cyclic dependencies in
# some cases, and in these cases it simply cannot be enabled, as packages in
# the cycle become uninstallable. Most crates should not need this, and you
# should not enable this just because "somebody told you so".
#collapse_features = false

# Set the Rules-Requires-Root field in debian/control; by default, this is set
# to "no"
#requires_root = "yes"

[source]

# Debian Standards-Version to use. By default debcargo uses latest policy version.
#policy = "4.0.0"

# Override or provide missing homepage for crate
#homepage = "https://clap.rs"

# Override the VCS entries.
# By default this points to a relevant subdirectory underneath the main
# repository for debcargo config files, owned by the Debian Rust Maintainers:
# https://salsa.debian.org/rust-team/debcargo-conf/
# Please only override this if your package is truly special, e.g. it combines
# lots of languages and/or there is not a crate at the top-level directory. In
# most cases you should prefer packaging as part of the Debian Rust Team, see
# https://wiki.debian.org/Teams/RustPackaging/Policy
#
#vcs_git = "https://salsa.debian.org/special_package/rust-special-0.1.git"
#vcs_browser = "https://salsa.debian.org/special_package/rust-special-0.1"

# Section override for the source package. Unless overridden here, library
# crates get "rust" and non-library crates get a "FIXME".
#section = "rust"

# Extra Build-Depends on top of those generated by debcargo.
# If you defined a custom d/rules that does extra stuff on top of dh-cargo,
# then you may need to use this.
#
# OTOH, if your crate needs external development headers to build, these should
# probably instead go in the [packages.lib] depends key rather than this key.
# debcargo will then automatically add those into the package Build-Depends if
# needed by dh-cargo; you don't have to add them here as well.
#build_depends = ["PLACEHOLDER", "PLACEHOLDER"]

# Build-Depends to subtract from those generated by debcargo. This should be
# used when our default generated Build-Depends results in a cycle. For
# example, this might happen if:
#
# - crate A's default-feature depends on crate B's no-default-features (which has no dependencies)
# - crate B's default-feature depends on crate A's no-default-features (which has no dependencies)
#
# In these cases, you'll need to (for example) add "librustA+B-dev <!nocheck>"
# to build_depends_excludes in A's debcargo.toml to break the cycle, and also
# add override_dh_auto_test to A's d/rules to avoid selecting the B feature
# when running the test build. Depending on the exact situation, it should be
# sufficient to do this override only for one of the packages in the cycle.
#
# Note that binary package Depends must be left alone in order to correctly
# express the dependencies; these ought not to have cycles in anyway, even in
# a case like the above example.
#
# This field should *not* be used to exclude arch-specific dependencies. We
# want to include them to support cross-compiling, and they should cause no
# problems since they are just source code. If our test "cargo build" fails for
# one of those dependencies, it should be handled in that package by disabling
# the failing test on the architectures that they are expected to fail on.
#build_depends_excludes = ["PLACEHOLDER", "PLACEHOLDER"]

# Binary package overrides.
#
# Different values for KEY selects different binary packages:
# lib           - the package for the library crate
# "lib+FEATURE" - the metapackage for feature FEATURE
# bin           - the package for the binary crate
#
[packages.KEY]

# Section override for the binary package. Use this if your crate is both a
# library and a binary crate; in this case, omit source.section which will
# default to "rust" and override this value for your binary package.
#section = "PLACEHOLDER"

# Short description for the package. If omitted, debcargo autogenerates this
# using the top-level "summary" key plus a suffix describing the feature.
#summary = "PLACEHOLDER"

# Long description for the package. If omitted, debcargo autogenerates this
# using the top-level "description" key plus a suffix describing the feature.
#description = """
#PLACEHOLDER
#"""

# Additional Depends on top of the ones generated by debcargo. This should be
# used to pull in system libraries for crates that need them to build. You'll
# want the -dev versions of the library packages, since our crate packages are
# development packages and not runtime packages.
#depends = ["PLACEHOLDER", "PLACEHOLDER"]

# We generate an autopkgtest (post-install test) for every feature, and also
# run `cargo test` for the default feature set during build-time if there are
# no additional dev-dependencies.
#
# However sometimes this may not work, e.g. if the crate is part of a larger
# workspace and its tests require files from the workspace directory. Or if
# the crate author is simply negligent and didn't ensure the test passes for
# all features. In these cases, you can use this setting to mark the test as
# "flaky" to ignore failures. Special cases for packages.KEY:
#
# packages."lib+@"      - disables the test for the --all-features autopkgtest
#
# The effect is transitive to its reverse-dependencies, so e.g. if you specify
# this for feature A, and feature B depends on feature A, then feature B also
# implicitly has this set. To unset it on feature B (and its transitive rdeps),
# explicit set this to false for feature B as well.
#
# So for example if the test breaks for the bare library (when running with
# --no-default-features) but works when the std feature is enabled, set this to
# true for [packages.lib] and false for [packages."lib+std"].
#
# Note: debcargo will error if you set these in an inconsistent way. For
# example if feature A depends on {B, C}, B says true and C says false, of
# course we cannot determine what A should be. You can suppress the error by
# explicitly giving A a value, either true or false.
#
#test_is_broken = false

# Some tests depend on extra system tools or libraries, which need to be given
# to autopkgtest. Like test_is_broken, the effect is transitive to its rdeps.
#test_depends = []

# Some tests might be broken on certain architectures, or just take too long.
# This allows to (transitively) set Architecture restrictions (either positive
# or negative) for autopkgtests. Use an explicit empty list ([]) to reset an
# inherited restriction. The "@" (all features) test will default to a
# combination of all individual restrictions.
#test_architecture = []

# Note: we do not (currently) support unsetting of this in indirect rdeps. This
# would result in similar conflict issues as documented for test_is_broken. It
# is possible to work around it similarly, by requiring manual resolution - but
# cancelling dependencies is harder to implement than true/false so we avoid it
# for now. Please file an issue if you have a real use-case for it.

# More additional fields. This is mostly useful for binary packages that might
# relate to other external programs, e.g. debcargo Recommends cargo.
#recommends = ["PLACEHOLDER", "PLACEHOLDER"]
#suggests = ["PLACEHOLDER", "PLACEHOLDER"]
#provides = ["PLACEHOLDER", "PLACEHOLDER"]

# Extra lines to include in the stanza, freeform. Use this to include things
# that debcargo doesn't handle, such as Breaks, Conflicts, Replaces.
#extra_lines = ["PLACEHOLDER", "PLACEHOLDER"]