/***************************************************************************//**
 * @file em_cmu.h
 * @brief Clock management unit (CMU) API
 * @version 4.0.0
 *******************************************************************************
 * @section License
 * <b>(C) Copyright 2014 Silicon Labs, http://www.silabs.com</b>
 *******************************************************************************
 *
 * Permission is granted to anyone to use this software for any purpose,
 * including commercial applications, and to alter it and redistribute it
 * freely, subject to the following restrictions:
 *
 * 1. The origin of this software must not be misrepresented; you must not
 *    claim that you wrote the original software.
 * 2. Altered source versions must be plainly marked as such, and must not be
 *    misrepresented as being the original software.
 * 3. This notice may not be removed or altered from any source distribution.
 *
 * DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Silicon Labs has no
 * obligation to support this Software. Silicon Labs is providing the
 * Software "AS IS", with no express or implied warranties of any kind,
 * including, but not limited to, any implied warranties of merchantability
 * or fitness for any particular purpose or warranties against infringement
 * of any proprietary rights of a third party.
 *
 * Silicon Labs will not be liable for any consequential, incidental, or
 * special damages, or any other relief, or for any claim by any third party,
 * arising from your use of this Software.
 *
 ******************************************************************************/


#ifndef __SILICON_LABS_EM_CMU_H_
#define __SILICON_LABS_EM_CMU_H_

#include "em_device.h"
#if defined( CMU_PRESENT )

#include <stdbool.h>
#include "em_bitband.h"

#ifdef __cplusplus
extern "C" {
#endif

/***************************************************************************//**
 * @addtogroup EM_Library
 * @{
 ******************************************************************************/

/***************************************************************************//**
 * @addtogroup CMU
 * @{
 ******************************************************************************/

/** @cond DO_NOT_INCLUDE_WITH_DOXYGEN */

/* Select register ids, for internal use */
#define CMU_NOSEL_REG              0
#define CMU_HFCLKSEL_REG           1
#define CMU_LFACLKSEL_REG          2
#define CMU_LFBCLKSEL_REG          3
#define CMU_DBGCLKSEL_REG          4
#if defined( _CMU_CMD_USBCCLKSEL_MASK )
#define CMU_USBCCLKSEL_REG         5
#endif
#if defined( _CMU_LFCLKSEL_LFC_MASK )
#define CMU_LFCCLKSEL_REG          6
#endif

#define CMU_SEL_REG_POS            0
#define CMU_SEL_REG_MASK           0xf

/* Divisor register ids, for internal use */
#define CMU_NODIV_REG              0
#define CMU_HFPERCLKDIV_REG        1
#define CMU_HFCORECLKDIV_REG       2
#define CMU_LFAPRESC0_REG          3
#define CMU_LFBPRESC0_REG          4
#if defined( _CMU_CTRL_HFCLKDIV_MASK )
#define CMU_HFCLKDIV_REG           5
#endif
#define CMU_DIV_REG_POS            4
#define CMU_DIV_REG_MASK           0xf

/* Enable register ids, for internal use */
#define CMU_NO_EN_REG              0
#define CMU_HFPERCLKDIV_EN_REG     1
#define CMU_HFPERCLKEN0_EN_REG     2
#define CMU_HFCORECLKEN0_EN_REG    3
#define CMU_LFACLKEN0_EN_REG       4
#define CMU_LFBCLKEN0_EN_REG       5
#define CMU_PCNT_EN_REG            6
#if defined( _CMU_LFCCLKEN0_MASK )
#define CMU_LFCCLKEN0_EN_REG       7
#endif

#define CMU_EN_REG_POS             8
#define CMU_EN_REG_MASK            0xf

/* Enable register bit position, for internal use */
#define CMU_EN_BIT_POS             12
#define CMU_EN_BIT_MASK            0x1f

/* Clock branch bitfield position, for internal use */
#define CMU_HF_CLK_BRANCH          0
#define CMU_HFPER_CLK_BRANCH       1
#define CMU_HFCORE_CLK_BRANCH      2
#define CMU_LFA_CLK_BRANCH         3
#define CMU_RTC_CLK_BRANCH         4
#define CMU_LETIMER_CLK_BRANCH     5
#define CMU_LCDPRE_CLK_BRANCH      6
#define CMU_LCD_CLK_BRANCH         7
#define CMU_LESENSE_CLK_BRANCH     8
#define CMU_LFB_CLK_BRANCH         9
#define CMU_LEUART0_CLK_BRANCH     10
#define CMU_LEUART1_CLK_BRANCH     11
#define CMU_DBG_CLK_BRANCH         12
#define CMU_AUX_CLK_BRANCH         13
#define CMU_USBC_CLK_BRANCH        14
#define CMU_LFC_CLK_BRANCH         15
#define CMU_USBLE_CLK_BRANCH       16

#define CMU_CLK_BRANCH_POS         17
#define CMU_CLK_BRANCH_MASK        0x1f

/** @endcond */

/*******************************************************************************
 ********************************   ENUMS   ************************************
 ******************************************************************************/

/** Clock divisors. These values are valid for prescalers. */
#define cmuClkDiv_1     1     /**< Divide clock by 1. */
#define cmuClkDiv_2     2     /**< Divide clock by 2. */
#define cmuClkDiv_4     4     /**< Divide clock by 4. */
#define cmuClkDiv_8     8     /**< Divide clock by 8. */
#define cmuClkDiv_16    16    /**< Divide clock by 16. */
#define cmuClkDiv_32    32    /**< Divide clock by 32. */
#define cmuClkDiv_64    64    /**< Divide clock by 64. */
#define cmuClkDiv_128   128   /**< Divide clock by 128. */
#define cmuClkDiv_256   256   /**< Divide clock by 256. */
#define cmuClkDiv_512   512   /**< Divide clock by 512. */
#define cmuClkDiv_1024  1024  /**< Divide clock by 1024. */
#define cmuClkDiv_2048  2048  /**< Divide clock by 2048. */
#define cmuClkDiv_4096  4096  /**< Divide clock by 4096. */
#define cmuClkDiv_8192  8192  /**< Divide clock by 8192. */
#define cmuClkDiv_16384 16384 /**< Divide clock by 16384. */
#define cmuClkDiv_32768 32768 /**< Divide clock by 32768. */

/** Clock divider configuration */
typedef uint32_t CMU_ClkDiv_TypeDef;

/** High frequency RC bands. */
typedef enum
{
  /** 1MHz RC band. */
  cmuHFRCOBand_1MHz  = _CMU_HFRCOCTRL_BAND_1MHZ,
  /** 7MHz RC band. */
  cmuHFRCOBand_7MHz  = _CMU_HFRCOCTRL_BAND_7MHZ,
  /** 11MHz RC band. */
  cmuHFRCOBand_11MHz = _CMU_HFRCOCTRL_BAND_11MHZ,
  /** 14MHz RC band. */
  cmuHFRCOBand_14MHz = _CMU_HFRCOCTRL_BAND_14MHZ,
  /** 21MHz RC band. */
  cmuHFRCOBand_21MHz = _CMU_HFRCOCTRL_BAND_21MHZ,
#if defined( _CMU_HFRCOCTRL_BAND_28MHZ )
  /** 28MHz RC band. */
  cmuHFRCOBand_28MHz = _CMU_HFRCOCTRL_BAND_28MHZ
#endif
} CMU_HFRCOBand_TypeDef;


#if defined( _CMU_AUXHFRCOCTRL_BAND_MASK )
/** AUX High frequency RC bands. */
typedef enum
{
  /** 1MHz RC band. */
  cmuAUXHFRCOBand_1MHz  = _CMU_AUXHFRCOCTRL_BAND_1MHZ,
  /** 7MHz RC band. */
  cmuAUXHFRCOBand_7MHz  = _CMU_AUXHFRCOCTRL_BAND_7MHZ,
  /** 11MHz RC band. */
  cmuAUXHFRCOBand_11MHz = _CMU_AUXHFRCOCTRL_BAND_11MHZ,
  /** 14MHz RC band. */
  cmuAUXHFRCOBand_14MHz = _CMU_AUXHFRCOCTRL_BAND_14MHZ,
  /** 21MHz RC band. */
  cmuAUXHFRCOBand_21MHz = _CMU_AUXHFRCOCTRL_BAND_21MHZ,
#if defined( _CMU_AUXHFRCOCTRL_BAND_28MHZ )
  /** 28MHz RC band. */
  cmuAUXHFRCOBand_28MHz = _CMU_AUXHFRCOCTRL_BAND_28MHZ
#endif
} CMU_AUXHFRCOBand_TypeDef;
#endif

#if defined( _CMU_USHFRCOCONF_BAND_MASK )
/** USB High frequency RC bands. */
typedef enum
{
  /** 24MHz RC band. */
  cmuUSHFRCOBand_24MHz = _CMU_USHFRCOCONF_BAND_24MHZ,
  /** 48MHz RC band. */
  cmuUSHFRCOBand_48MHz = _CMU_USHFRCOCONF_BAND_48MHZ,
} CMU_USHFRCOBand_TypeDef;
#endif


/** Clock points in CMU. Please refer to CMU overview in reference manual. */
typedef enum
{
  /*******************/
  /* HF clock branch */
  /*******************/

  /** High frequency clock */
#if defined( _CMU_CTRL_HFCLKDIV_MASK )
  cmuClock_HF = (CMU_HFCLKDIV_REG << CMU_DIV_REG_POS) |
                (CMU_HFCLKSEL_REG << CMU_SEL_REG_POS) |
                (CMU_NO_EN_REG << CMU_EN_REG_POS) |
                (0 << CMU_EN_BIT_POS) |
                (CMU_HF_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#else
  cmuClock_HF = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                (CMU_HFCLKSEL_REG << CMU_SEL_REG_POS) |
                (CMU_NO_EN_REG << CMU_EN_REG_POS) |
                (0 << CMU_EN_BIT_POS) |
                (CMU_HF_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

  /** Debug clock */
  cmuClock_DBG = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                 (CMU_DBGCLKSEL_REG << CMU_SEL_REG_POS) |
                 (CMU_NO_EN_REG << CMU_EN_REG_POS) |
                 (0 << CMU_EN_BIT_POS) |
                 (CMU_DBG_CLK_BRANCH << CMU_CLK_BRANCH_POS),

  /** AUX clock */
  cmuClock_AUX = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                 (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                 (CMU_NO_EN_REG << CMU_EN_REG_POS) |
                 (0 << CMU_EN_BIT_POS) |
                 (CMU_AUX_CLK_BRANCH << CMU_CLK_BRANCH_POS),

  /**********************************/
  /* HF peripheral clock sub-branch */
  /**********************************/

  /** High frequency peripheral clock */
  cmuClock_HFPER = (CMU_HFPERCLKDIV_REG << CMU_DIV_REG_POS) |
                   (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                   (CMU_HFPERCLKDIV_EN_REG << CMU_EN_REG_POS) |
                   (_CMU_HFPERCLKDIV_HFPERCLKEN_SHIFT << CMU_EN_BIT_POS) |
                   (CMU_HFPER_CLK_BRANCH << CMU_CLK_BRANCH_POS),

#if defined(_CMU_HFPERCLKEN0_USART0_MASK)
  /** Universal sync/async receiver/transmitter 0 clock. */
  cmuClock_USART0 = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                    (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                    (CMU_HFPERCLKEN0_EN_REG << CMU_EN_REG_POS) |
                    (_CMU_HFPERCLKEN0_USART0_SHIFT << CMU_EN_BIT_POS) |
                    (CMU_HFPER_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(_CMU_HFPERCLKEN0_USARTRF0_MASK)
  /** Universal sync/async receiver/transmitter 0 clock. */
  cmuClock_USARTRF0 = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                    (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                    (CMU_HFPERCLKEN0_EN_REG << CMU_EN_REG_POS) |
                    (_CMU_HFPERCLKEN0_USARTRF0_SHIFT << CMU_EN_BIT_POS) |
                    (CMU_HFPER_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(_CMU_HFPERCLKEN0_USART1_MASK)
  /** Universal sync/async receiver/transmitter 1 clock. */
  cmuClock_USART1 = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                    (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                    (CMU_HFPERCLKEN0_EN_REG << CMU_EN_REG_POS) |
                    (_CMU_HFPERCLKEN0_USART1_SHIFT << CMU_EN_BIT_POS) |
                    (CMU_HFPER_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(_CMU_HFPERCLKEN0_USART2_MASK)
  /** Universal sync/async receiver/transmitter 2 clock. */
  cmuClock_USART2 = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                    (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                    (CMU_HFPERCLKEN0_EN_REG << CMU_EN_REG_POS) |
                    (_CMU_HFPERCLKEN0_USART2_SHIFT << CMU_EN_BIT_POS) |
                    (CMU_HFPER_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(_CMU_HFPERCLKEN0_UART0_MASK)
  /** Universal async receiver/transmitter 0 clock. */
  cmuClock_UART0 = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                   (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                   (CMU_HFPERCLKEN0_EN_REG << CMU_EN_REG_POS) |
                   (_CMU_HFPERCLKEN0_UART0_SHIFT << CMU_EN_BIT_POS) |
                   (CMU_HFPER_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(_CMU_HFPERCLKEN0_UART1_MASK)
  /** Universal async receiver/transmitter 1 clock. */
  cmuClock_UART1 = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                   (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                   (CMU_HFPERCLKEN0_EN_REG << CMU_EN_REG_POS) |
                   (_CMU_HFPERCLKEN0_UART1_SHIFT << CMU_EN_BIT_POS) |
                   (CMU_HFPER_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(_CMU_HFPERCLKEN0_TIMER0_MASK)
  /** Timer 0 clock. */
  cmuClock_TIMER0 = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                    (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                    (CMU_HFPERCLKEN0_EN_REG << CMU_EN_REG_POS) |
                    (_CMU_HFPERCLKEN0_TIMER0_SHIFT << CMU_EN_BIT_POS) |
                    (CMU_HFPER_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(_CMU_HFPERCLKEN0_TIMER1_MASK)
  /** Timer 1 clock. */
  cmuClock_TIMER1 = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                    (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                    (CMU_HFPERCLKEN0_EN_REG << CMU_EN_REG_POS) |
                    (_CMU_HFPERCLKEN0_TIMER1_SHIFT << CMU_EN_BIT_POS) |
                    (CMU_HFPER_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(_CMU_HFPERCLKEN0_TIMER2_MASK)
  /** Timer 2 clock. */
  cmuClock_TIMER2 = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                    (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                    (CMU_HFPERCLKEN0_EN_REG << CMU_EN_REG_POS) |
                    (_CMU_HFPERCLKEN0_TIMER2_SHIFT << CMU_EN_BIT_POS) |
                    (CMU_HFPER_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(_CMU_HFPERCLKEN0_TIMER3_MASK)
  /** Timer 3 clock. */
  cmuClock_TIMER3 = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                    (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                    (CMU_HFPERCLKEN0_EN_REG << CMU_EN_REG_POS) |
                    (_CMU_HFPERCLKEN0_TIMER3_SHIFT << CMU_EN_BIT_POS) |
                    (CMU_HFPER_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(_CMU_HFPERCLKEN0_ACMP0_MASK)
  /** Analog comparator 0 clock. */
  cmuClock_ACMP0 = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                   (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                   (CMU_HFPERCLKEN0_EN_REG << CMU_EN_REG_POS) |
                   (_CMU_HFPERCLKEN0_ACMP0_SHIFT << CMU_EN_BIT_POS) |
                   (CMU_HFPER_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(_CMU_HFPERCLKEN0_ACMP1_MASK)
  /** Analog comparator 1 clock. */
  cmuClock_ACMP1 = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                   (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                   (CMU_HFPERCLKEN0_EN_REG << CMU_EN_REG_POS) |
                   (_CMU_HFPERCLKEN0_ACMP1_SHIFT << CMU_EN_BIT_POS) |
                   (CMU_HFPER_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(_CMU_HFPERCLKEN0_PRS_MASK)
  /** Peripheral reflex system clock. */
  cmuClock_PRS = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                 (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                 (CMU_HFPERCLKEN0_EN_REG << CMU_EN_REG_POS) |
                 (_CMU_HFPERCLKEN0_PRS_SHIFT << CMU_EN_BIT_POS) |
                 (CMU_HFPER_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(_CMU_HFPERCLKEN0_DAC0_MASK)
  /** Digital to analog converter 0 clock. */
  cmuClock_DAC0 = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                  (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                  (CMU_HFPERCLKEN0_EN_REG << CMU_EN_REG_POS) |
                  (_CMU_HFPERCLKEN0_DAC0_SHIFT << CMU_EN_BIT_POS) |
                  (CMU_HFPER_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(_CMU_HFPERCLKEN0_IDAC0_MASK)
  /** Digital to analog converter 0 clock. */
  cmuClock_IDAC0 = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                  (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                  (CMU_HFPERCLKEN0_EN_REG << CMU_EN_REG_POS) |
                  (_CMU_HFPERCLKEN0_IDAC0_SHIFT << CMU_EN_BIT_POS) |
                  (CMU_HFPER_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(GPIO_PRESENT)
  /** General purpose input/output clock. */
  cmuClock_GPIO = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                  (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                  (CMU_HFPERCLKEN0_EN_REG << CMU_EN_REG_POS) |
                  (_CMU_HFPERCLKEN0_GPIO_SHIFT << CMU_EN_BIT_POS) |
                  (CMU_HFPER_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(VCMP_PRESENT)
  /** Voltage comparator clock. */
  cmuClock_VCMP = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                  (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                  (CMU_HFPERCLKEN0_EN_REG << CMU_EN_REG_POS) |
                  (_CMU_HFPERCLKEN0_VCMP_SHIFT << CMU_EN_BIT_POS) |
                  (CMU_HFPER_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(_CMU_HFPERCLKEN0_ADC0_MASK)
  /** Analog to digital converter 0 clock. */
  cmuClock_ADC0 = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                  (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                  (CMU_HFPERCLKEN0_EN_REG << CMU_EN_REG_POS) |
                  (_CMU_HFPERCLKEN0_ADC0_SHIFT << CMU_EN_BIT_POS) |
                  (CMU_HFPER_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(_CMU_HFPERCLKEN0_I2C0_MASK)
  /** I2C 0 clock. */
  cmuClock_I2C0 = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                  (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                  (CMU_HFPERCLKEN0_EN_REG << CMU_EN_REG_POS) |
                  (_CMU_HFPERCLKEN0_I2C0_SHIFT << CMU_EN_BIT_POS) |
                  (CMU_HFPER_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(_CMU_HFPERCLKEN0_I2C1_MASK)
  /** I2C 1 clock. */
  cmuClock_I2C1 = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                  (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                  (CMU_HFPERCLKEN0_EN_REG << CMU_EN_REG_POS) |
                  (_CMU_HFPERCLKEN0_I2C1_SHIFT << CMU_EN_BIT_POS) |
                  (CMU_HFPER_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

  /**********************/
  /* HF core sub-branch */
  /**********************/

  /** Core clock */
  cmuClock_CORE = (CMU_HFCORECLKDIV_REG << CMU_DIV_REG_POS) |
                  (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                  (CMU_NO_EN_REG << CMU_EN_REG_POS) |
                  (0 << CMU_EN_BIT_POS) |
                  (CMU_HFCORE_CLK_BRANCH << CMU_CLK_BRANCH_POS),

#if defined(AES_PRESENT)
  /** Advanced encryption standard accelerator clock. */
  cmuClock_AES = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                 (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                 (CMU_HFCORECLKEN0_EN_REG << CMU_EN_REG_POS) |
                 (_CMU_HFCORECLKEN0_AES_SHIFT << CMU_EN_BIT_POS) |
                 (CMU_HFCORE_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(DMA_PRESENT)
  /** Direct memory access controller clock. */
  cmuClock_DMA = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                 (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                 (CMU_HFCORECLKEN0_EN_REG << CMU_EN_REG_POS) |
                 (_CMU_HFCORECLKEN0_DMA_SHIFT << CMU_EN_BIT_POS) |
                 (CMU_HFCORE_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif
  /** Low energy clocking module clock. */
  cmuClock_CORELE = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                    (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                    (CMU_HFCORECLKEN0_EN_REG << CMU_EN_REG_POS) |
                    (_CMU_HFCORECLKEN0_LE_SHIFT << CMU_EN_BIT_POS) |
                    (CMU_HFCORE_CLK_BRANCH << CMU_CLK_BRANCH_POS),

#if defined(EBI_PRESENT)
  /** External bus interface clock. */
  cmuClock_EBI = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                 (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                 (CMU_HFCORECLKEN0_EN_REG << CMU_EN_REG_POS) |
                 (_CMU_HFCORECLKEN0_EBI_SHIFT << CMU_EN_BIT_POS) |
                 (CMU_HFCORE_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(USB_PRESENT)
  /** USB Core clock. */
  cmuClock_USBC = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                  (CMU_USBCCLKSEL_REG << CMU_SEL_REG_POS) |
                  (CMU_HFCORECLKEN0_EN_REG << CMU_EN_REG_POS) |
                  (_CMU_HFCORECLKEN0_USBC_SHIFT << CMU_EN_BIT_POS) |
                  (CMU_USBC_CLK_BRANCH << CMU_CLK_BRANCH_POS),

#endif

#if defined(USB_PRESENT)
  /** USB clock. */
  cmuClock_USB = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                 (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                 (CMU_HFCORECLKEN0_EN_REG << CMU_EN_REG_POS) |
                 (_CMU_HFCORECLKEN0_USB_SHIFT << CMU_EN_BIT_POS) |
                 (CMU_HFCORE_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

  /***************/
  /* LF A branch */
  /***************/

  /** Low frequency A clock */
  cmuClock_LFA = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                 (CMU_LFACLKSEL_REG << CMU_SEL_REG_POS) |
                 (CMU_NO_EN_REG << CMU_EN_REG_POS) |
                 (0 << CMU_EN_BIT_POS) |
                 (CMU_LFA_CLK_BRANCH << CMU_CLK_BRANCH_POS),

#if defined(RTC_PRESENT)
  /** Real time counter clock. */
  cmuClock_RTC = (CMU_LFAPRESC0_REG << CMU_DIV_REG_POS) |
                 (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                 (CMU_LFACLKEN0_EN_REG << CMU_EN_REG_POS) |
                 (_CMU_LFACLKEN0_RTC_SHIFT << CMU_EN_BIT_POS) |
                 (CMU_RTC_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(_CMU_LFACLKEN0_LETIMER0_MASK)
  /** Low energy timer 0 clock. */
  cmuClock_LETIMER0 = (CMU_LFAPRESC0_REG << CMU_DIV_REG_POS) |
                      (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                      (CMU_LFACLKEN0_EN_REG << CMU_EN_REG_POS) |
                      (_CMU_LFACLKEN0_LETIMER0_SHIFT << CMU_EN_BIT_POS) |
                      (CMU_LETIMER_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(_CMU_LFACLKEN0_LCD_MASK)
  /** Liquid crystal display, pre FDIV clock. */
  cmuClock_LCDpre = (CMU_LFAPRESC0_REG << CMU_DIV_REG_POS) |
                    (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                    (CMU_NO_EN_REG << CMU_EN_REG_POS) |
                    (0 << CMU_EN_BIT_POS) |
                    (CMU_LCDPRE_CLK_BRANCH << CMU_CLK_BRANCH_POS),

  /** Liquid crystal display clock. Please notice that FDIV prescaler
   * must be set by special API. */
  cmuClock_LCD = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                 (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                 (CMU_LFACLKEN0_EN_REG << CMU_EN_REG_POS) |
                 (_CMU_LFACLKEN0_LCD_SHIFT << CMU_EN_BIT_POS) |
                 (CMU_LCD_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(_CMU_PCNTCTRL_PCNT0CLKEN_MASK)
  /** Pulse counter 0 clock. */
  cmuClock_PCNT0 = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                   (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                   (CMU_PCNT_EN_REG << CMU_EN_REG_POS) |
                   (_CMU_PCNTCTRL_PCNT0CLKEN_SHIFT << CMU_EN_BIT_POS) |
                   (CMU_LFA_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(_CMU_PCNTCTRL_PCNT1CLKEN_MASK)
  /** Pulse counter 1 clock. */
  cmuClock_PCNT1 = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                   (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                   (CMU_PCNT_EN_REG << CMU_EN_REG_POS) |
                   (_CMU_PCNTCTRL_PCNT1CLKEN_SHIFT << CMU_EN_BIT_POS) |
                   (CMU_LFA_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(_CMU_PCNTCTRL_PCNT2CLKEN_MASK)
  /** Pulse counter 2 clock. */
  cmuClock_PCNT2 = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                   (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                   (CMU_PCNT_EN_REG << CMU_EN_REG_POS) |
                   (_CMU_PCNTCTRL_PCNT2CLKEN_SHIFT << CMU_EN_BIT_POS) |
                   (CMU_LFA_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif
#if defined(_CMU_LFACLKEN0_LESENSE_MASK)
  /** LESENSE clock. */
  cmuClock_LESENSE = (CMU_LFAPRESC0_REG << CMU_DIV_REG_POS) |
                     (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                     (CMU_LFACLKEN0_EN_REG << CMU_EN_REG_POS) |
                     (_CMU_LFACLKEN0_LESENSE_SHIFT << CMU_EN_BIT_POS) |
                     (CMU_LESENSE_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

  /***************/
  /* LF B branch */
  /***************/

  /** Low frequency B clock */
  cmuClock_LFB = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                 (CMU_LFBCLKSEL_REG << CMU_SEL_REG_POS) |
                 (CMU_NO_EN_REG << CMU_EN_REG_POS) |
                 (0 << CMU_EN_BIT_POS) |
                 (CMU_LFB_CLK_BRANCH << CMU_CLK_BRANCH_POS),

#if defined(_CMU_LFBCLKEN0_LEUART0_MASK)
  /** Low energy universal asynchronous receiver/transmitter 0 clock. */
  cmuClock_LEUART0 = (CMU_LFBPRESC0_REG << CMU_DIV_REG_POS) |
                     (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                     (CMU_LFBCLKEN0_EN_REG << CMU_EN_REG_POS) |
                     (_CMU_LFBCLKEN0_LEUART0_SHIFT << CMU_EN_BIT_POS) |
                     (CMU_LEUART0_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(_CMU_LFBCLKEN0_LEUART1_MASK)
  /** Low energy universal asynchronous receiver/transmitter 1 clock. */
  cmuClock_LEUART1 = (CMU_LFBPRESC0_REG << CMU_DIV_REG_POS) |
                     (CMU_NOSEL_REG << CMU_SEL_REG_POS) |
                     (CMU_LFBCLKEN0_EN_REG << CMU_EN_REG_POS) |
                     (_CMU_LFBCLKEN0_LEUART1_SHIFT << CMU_EN_BIT_POS) |
                     (CMU_LEUART1_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

  /***************/
  /* LF C branch */
  /***************/

  /** Low frequency C clock */
#if defined( _CMU_LFCLKSEL_LFC_MASK )
  cmuClock_LFC = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                 (CMU_LFCCLKSEL_REG << CMU_SEL_REG_POS) |
                 (CMU_NO_EN_REG << CMU_EN_REG_POS) |
                 (0 << CMU_EN_BIT_POS) |
                 (CMU_LFC_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

#if defined(_CMU_LFCCLKEN0_USBLE_MASK)
  /** USB LE clock. */
  cmuClock_USBLE = (CMU_NODIV_REG << CMU_DIV_REG_POS) |
                   (CMU_LFCCLKSEL_REG << CMU_SEL_REG_POS) |
                   (CMU_LFCCLKEN0_EN_REG << CMU_EN_REG_POS) |
                   (_CMU_LFCCLKEN0_USBLE_SHIFT << CMU_EN_BIT_POS) |
                   (CMU_USBLE_CLK_BRANCH << CMU_CLK_BRANCH_POS),
#endif

} CMU_Clock_TypeDef;


/** Oscillator types. */
typedef enum
{
  cmuOsc_LFXO,     /**< Low frequency crystal oscillator. */
  cmuOsc_LFRCO,    /**< Low frequency RC oscillator. */
  cmuOsc_HFXO,     /**< High frequency crystal oscillator. */
  cmuOsc_HFRCO,    /**< High frequency RC oscillator. */
  cmuOsc_AUXHFRCO, /**< Auxiliary high frequency RC oscillator. */
#if defined( _CMU_STATUS_USHFRCOENS_MASK )
  cmuOsc_USHFRCO,  /**< USB high frequency RC oscillator */
#endif
#if defined( _CMU_LFCLKSEL_LFAE_ULFRCO )
  cmuOsc_ULFRCO    /**< Ultra low frequency RC oscillator. */
#endif
} CMU_Osc_TypeDef;


/** Selectable clock sources. */
typedef enum
{
  cmuSelect_Error,      /**< Usage error. */
  cmuSelect_Disabled,   /**< Clock selector disabled. */
  cmuSelect_LFXO,       /**< Low frequency crystal oscillator. */
  cmuSelect_LFRCO,      /**< Low frequency RC oscillator. */
  cmuSelect_HFXO,       /**< High frequency crystal oscillator. */
  cmuSelect_HFRCO,      /**< High frequency RC oscillator. */
  cmuSelect_CORELEDIV2, /**< Core low energy clock divided by 2. */
  cmuSelect_AUXHFRCO,   /**< Auxilliary clock source can be used for debug clock */
  cmuSelect_HFCLK,      /**< Divided HFCLK on Giant for debug clock, undivided on Tiny Gecko and for USBC (not used on Gecko) */
#if defined( _CMU_STATUS_USHFRCOENS_MASK )
  cmuSelect_USHFRCO,    /**< USB high frequency RC oscillator */
#endif
#if defined( _CMU_CMD_HFCLKSEL_USHFRCODIV2 )
  cmuSelect_USHFRCODIV2,/**< USB high frequency RC oscillator */
#endif
#if defined( _CMU_LFCLKSEL_LFAE_ULFRCO )
  cmuSelect_ULFRCO,     /**< Ultra low frequency RC oscillator. */
#endif
} CMU_Select_TypeDef;


/*******************************************************************************
 *****************************   PROTOTYPES   **********************************
 ******************************************************************************/

void CMU_ClockEnable(CMU_Clock_TypeDef clock, bool enable);
uint32_t CMU_ClockFreqGet(CMU_Clock_TypeDef clock);
CMU_ClkDiv_TypeDef CMU_ClockDivGet(CMU_Clock_TypeDef clock);
CMU_Select_TypeDef CMU_ClockSelectGet(CMU_Clock_TypeDef clock);
void CMU_ClockDivSet(CMU_Clock_TypeDef clock, CMU_ClkDiv_TypeDef div);
void CMU_ClockSelectSet(CMU_Clock_TypeDef clock, CMU_Select_TypeDef ref);

CMU_HFRCOBand_TypeDef CMU_HFRCOBandGet(void);
void CMU_HFRCOBandSet(CMU_HFRCOBand_TypeDef band);

#if defined( _CMU_AUXHFRCOCTRL_BAND_MASK )
CMU_AUXHFRCOBand_TypeDef CMU_AUXHFRCOBandGet(void);
void CMU_AUXHFRCOBandSet(CMU_AUXHFRCOBand_TypeDef band);
#endif

#if defined( _CMU_USHFRCOCONF_BAND_MASK )
CMU_USHFRCOBand_TypeDef CMU_USHFRCOBandGet(void);
void CMU_USHFRCOBandSet(CMU_USHFRCOBand_TypeDef band);
#endif

void CMU_HFRCOStartupDelaySet(uint32_t delay);
uint32_t CMU_HFRCOStartupDelayGet(void);

void CMU_OscillatorEnable(CMU_Osc_TypeDef osc, bool enable, bool wait);
uint32_t CMU_OscillatorTuningGet(CMU_Osc_TypeDef osc);
void CMU_OscillatorTuningSet(CMU_Osc_TypeDef osc, uint32_t val);

bool CMU_PCNTClockExternalGet(unsigned int inst);
void CMU_PCNTClockExternalSet(unsigned int inst, bool external);

uint32_t CMU_LCDClkFDIVGet(void);
void CMU_LCDClkFDIVSet(uint32_t div);

void CMU_FreezeEnable(bool enable);
uint32_t CMU_Calibrate(uint32_t HFCycles, CMU_Osc_TypeDef reference);

#if defined( _CMU_CALCTRL_UPSEL_MASK ) && defined( _CMU_CALCTRL_DOWNSEL_MASK )
void CMU_CalibrateConfig(uint32_t downCycles, CMU_Osc_TypeDef downSel,
                         CMU_Osc_TypeDef upSel);
#endif

/***************************************************************************//**
 * @brief
 *   Clear one or more pending CMU interrupts.
 *
 * @param[in] flags
 *   CMU interrupt sources to clear.
 ******************************************************************************/
__STATIC_INLINE void CMU_IntClear(uint32_t flags)
{
  CMU->IFC = flags;
}


/***************************************************************************//**
 * @brief
 *   Disable one or more CMU interrupts.
 *
 * @param[in] flags
 *   CMU interrupt sources to disable.
 ******************************************************************************/
__STATIC_INLINE void CMU_IntDisable(uint32_t flags)
{
  CMU->IEN &= ~flags;
}


/***************************************************************************//**
 * @brief
 *   Enable one or more CMU interrupts.
 *
 * @note
 *   Depending on the use, a pending interrupt may already be set prior to
 *   enabling the interrupt. Consider using CMU_IntClear() prior to enabling
 *   if such a pending interrupt should be ignored.
 *
 * @param[in] flags
 *   CMU interrupt sources to enable.
 ******************************************************************************/
__STATIC_INLINE void CMU_IntEnable(uint32_t flags)
{
  CMU->IEN |= flags;
}


/***************************************************************************//**
 * @brief
 *   Get pending CMU interrupts.
 *
 * @return
 *   CMU interrupt sources pending.
 ******************************************************************************/
__STATIC_INLINE uint32_t CMU_IntGet(void)
{
  return CMU->IF;
}


/***************************************************************************//**
 * @brief
 *   Get enabled and pending CMU interrupt flags.
 *
 * @details
 *   Useful for handling more interrupt sources in the same interrupt handler.
 *
 * @note
 *   The event bits are not cleared by the use of this function.
 *
 * @return
 *   Pending and enabled CMU interrupt sources.
 *   The return value is the bitwise AND combination of
 *   - the OR combination of enabled interrupt sources in CMU_IEN_nnn
 *   register (CMU_IEN_nnn) and
 *   - the OR combination of valid interrupt flags of the CMU module
 *   (CMU_IF_nnn).
 ******************************************************************************/
__STATIC_INLINE uint32_t CMU_IntGetEnabled(void)
{
  uint32_t tmp = 0U;


  /* Store LESENSE->IEN in temporary variable in order to define explicit order
   * of volatile accesses. */
  tmp = CMU->IEN;

  /* Bitwise AND of pending and enabled interrupts */
  return CMU->IF & tmp;
}


/**************************************************************************//**
 * @brief
 *   Set one or more pending CMU interrupts from SW.
 *
 * @param[in] flags
 *   CMU interrupt sources to set to pending.
 *****************************************************************************/
__STATIC_INLINE void CMU_IntSet(uint32_t flags)
{
  CMU->IFS = flags;
}


/***************************************************************************//**
 * @brief
 *   Lock the CMU in order to protect some of its registers against unintended
 *   modification.
 *
 * @details
 *   Please refer to the reference manual for CMU registers that will be
 *   locked.
 *
 * @note
 *   If locking the CMU registers, they must be unlocked prior to using any
 *   CMU API functions modifying CMU registers protected by the lock.
 ******************************************************************************/
__STATIC_INLINE void CMU_Lock(void)
{
  CMU->LOCK = CMU_LOCK_LOCKKEY_LOCK;
}


/***************************************************************************//**
 * @brief
 *   Unlock the CMU so that writing to locked registers again is possible.
 ******************************************************************************/
__STATIC_INLINE void CMU_Unlock(void)
{
  CMU->LOCK = CMU_LOCK_LOCKKEY_UNLOCK;
}


/***************************************************************************//**
 * @brief
 *    Get calibration count register
 * @note
 *    If continuous calibrartion mode is active, calibration busy will allmost
 *    always be on, and we just need to read the value, where the normal case
 *    would be that this function call has been triggered by the CALRDY
 *    interrupt flag.
 * @return
 *    Calibration count, the number of UPSEL clocks (see CMU_CalibrateConfig)
 *    in the period of DOWNSEL oscillator clock cycles configured by a previous
 *    write operation to CMU->CALCNT
 ******************************************************************************/
__STATIC_INLINE uint32_t CMU_CalibrateCountGet(void)
{
  /* Wait until calibration completes, UNLESS continuous calibration mode is  */
  /* active */
#if defined( CMU_CALCTRL_CONT )
  if (!(CMU->CALCTRL & CMU_CALCTRL_CONT))
  {
    while (CMU->STATUS & CMU_STATUS_CALBSY)
      ;
  }
#else
  while (CMU->STATUS & CMU_STATUS_CALBSY)
      ;
#endif
  return CMU->CALCNT;
}


/***************************************************************************//**
 * @brief
 *   Starts calibration
 * @note
 *   This call is usually invoked after CMU_CalibrateConfig() and possibly
 *   CMU_CalibrateCont()
 ******************************************************************************/
__STATIC_INLINE void CMU_CalibrateStart(void)
{
  CMU->CMD = CMU_CMD_CALSTART;
}


#if defined( CMU_CMD_CALSTOP )
/***************************************************************************//**
 * @brief
 *   Stop the calibration counters
 ******************************************************************************/
__STATIC_INLINE void CMU_CalibrateStop(void)
{
  CMU->CMD = CMU_CMD_CALSTOP;
}
#endif


#if defined( CMU_CALCTRL_CONT )
/***************************************************************************//**
 * @brief
 *   Configures continuous calibration mode
 * @param[in] enable
 *   If true, enables continuous calibration, if false disables continuous
 *   calibrartion
 ******************************************************************************/
__STATIC_INLINE void CMU_CalibrateCont(bool enable)
{
  BITBAND_Peripheral(&(CMU->CALCTRL), _CMU_CALCTRL_CONT_SHIFT, enable);
}
#endif

/** @} (end addtogroup CMU) */
/** @} (end addtogroup EM_Library) */

#ifdef __cplusplus
}
#endif

#endif /* defined( CMU_PRESENT ) */
#endif /* __SILICON_LABS_EM_CMU_H_ */