# erdtree (erd)
[](https://github.com/solidiquis/erdtree/actions)
[](https://crates.io/crates/erdtree)
[](https://repology.org/project/erdtree/versions)
[](https://crates.io/crates/erdtree)
`erdtree` is a modern, cross-platform, multi-threaded, and general purpose filesystem and disk-usage utility that is aware of `.gitignore` and hidden file rules.
The following are some feature highlights:
* Reports disk usage using a variety of metrics: bytes (logical or physical), blocks (Unix-only), word-count, or line-count.
* Supports an `ls -l`-like view with information about owners, group, file permission, etc. (Unix-only).
* Respects hidden file and gitignore rules by default.
* Supports regular expressions and glob based searching by file-type.
* Comes with several layouts: a reverse tree output, a `tree`-like output, or a `du`-like output.
* Granular sorting capabilities.
* Supports icons.
* Colorized with `LS_COLORS`.
You can think of `erdtree` as a little bit of `du`, `tree`, `find`, `wc` and `ls`.
## Table of Contents
* [Usage](#usage)
* [Installation](#installation)
* [Documentation](#documentation)
- [Configuration file](#configuration-file)
- [Toml file](#toml-file)
- [.erdtreerc](#erdtreerc)
- [Hardlinks](#hardlinks)
- [Symlinks](#symlinks)
- [Disk usage](#disk-usage)
- [Physical vs logical](#physical-vs-logical)
- [Matching `du` output](#matching-du-output)
- [Word and line count](#word-and-line-count)
- [Layouts](#layouts)
- [gitignore](#gitignore)
- [Hidden files](#hidden-files)
- [Icons](#icons)
- [Maximum depth](#maximum-depth)
- [Pruning empty directories](#pruning-empty-directories)
- [Sorting](#sorting)
- [Directories only](#directories-only)
- [Long view](#long-view)
- [Regular expressions and globbing](#regular-expressions-and-globbing)
- [Truncating output](#truncating-output)
- [Redirecting output and colorization](#redirecting-output-and-colorization)
- [Parallelism](#parallelism)
- [Completions](#completions)
- [Same filesystem](#same-filesystem)
* [Comparisons against similar programs](#comparisons-against-similar-programs)
- [exa](#exa)
- [dua](#dua)
- [dust](#dust)
- [fd](#fd)
* [Rules for contributing](#rules-for-contributing)
* [Security policy](#security-policy)
* [Questions you might have](#questions-you-might-have)
## Usage
```
$ erd --help
erdtree (erd) is a cross-platform, multi-threaded, and general purpose filesystem and disk usage utility.
Usage: erd [OPTIONS] [DIR]
Arguments:
[DIR]
Directory to traverse; defaults to current working directory
Options:
-c, --config
Use configuration of named table rather than the top-level table in .erdtree.toml
-C, --color
Mode of coloring output
[default: auto]
Possible values:
- none: Print plainly without ANSI escapes
- auto: Attempt to colorize output
- force: Turn on colorization always
-d, --disk-usage
Print physical or logical file size
[default: physical]
Possible values:
- logical:
How many bytes does a file contain
- physical:
How many actual bytes on disk, taking into account blocks, sparse files, and compression
- line:
How many total lines a file contains
- word:
How many total words a file contains
- block:
How many blocks are allocated to store the file
-f, --follow
Follow symlinks
-H, --human
Print disk usage in human-readable format
-i, --no-ignore
Do not respect .gitignore files
-I, --icons
Display file icons
-l, --long
Show extended metadata and attributes
--group
Show file's groups
--ino
Show each file's ino
--nlink
Show the total number of hardlinks to the underlying inode
--octal
Show permissions in numeric octal format instead of symbolic
--time
Which kind of timestamp to use; modified by default
Possible values:
- create: Time created (alias: ctime)
- access: Time last accessed (alias: atime)
- mod: Time last modified (alias: mtime)
--time-format
Which format to use for the timestamp; default by default
Possible values:
- iso:
Timestamp formatted following the iso8601, with slight differences and the time-zone omitted
- iso-strict:
Timestamp formatted following the exact iso8601 specifications
- short:
Timestamp only shows date without time in YYYY-MM-DD format
- default:
Timestamp is shown in DD MMM HH:MM format
-L, --level
Maximum depth to display
-p, --pattern
Regular expression (or glob if '--glob' or '--iglob' is used) used to match files
--glob
Enables glob based searching
--iglob
Enables case-insensitive glob based searching
-t, --file-type
Restrict regex or glob search to a particular file-type
Possible values:
- file: A regular file
- dir: A directory
- link: A symlink
-P, --prune
Remove empty directories from output
-s, --sort
How to sort entries
[default: size]
Possible values:
- name: Sort entries by file name in lexicographical order
- rname: Sort entries by file name in reversed lexicographical order
- size: Sort entries by size smallest to largest, top to bottom
- rsize: Sort entries by size largest to smallest, bottom to top
- access: Sort entries by newer to older Accessing Date
- raccess: Sort entries by older to newer Accessing Date
- create: Sort entries by newer to older Creation Date
- rcreate: Sort entries by older to newer Creation Date
- mod: Sort entries by newer to older Alteration Date
- rmod: Sort entries by older to newer Alteration Date
--dir-order
Sort directories before or after all other file types
[default: none]
Possible values:
- none: Directories are ordered as if they were regular nodes
- first: Sort directories above files
- last: Sort directories below files
-T, --threads
Number of threads to use
[default: 10]
-u, --unit
Report disk usage in binary or SI units
[default: bin]
Possible values:
- bin: Displays disk usage using binary prefixes
- si: Displays disk usage using SI prefixes
-x, --one-file-system
Prevent traversal into directories that are on different filesystems
-y, --layout
Which kind of layout to use when rendering the output
[default: regular]
Possible values:
- regular: Outputs the tree with the root node at the bottom of the output
- inverted: Outputs the tree with the root node at the top of the output
- flat: Outputs a flat layout using paths rather than an ASCII tree
- iflat: Outputs an inverted flat layout with the root at the top of the output
-., --hidden
Show hidden files
--no-git
Disable traversal of .git directory when traversing hidden files
--completions
Print completions for a given shell to stdout
[possible values: bash, elvish, fish, powershell, zsh]
--dirs-only
Only print directories
--no-config
Don't read configuration file
--no-progress
Hides the progress indicator
--suppress-size
Omit disk usage from output
--truncate
Truncate output to fit terminal emulator window
-h, --help
Print help (see a summary with '-h')
-V, --version
Print version
```
`-l, --long` and all of its arguments are currently not available on Windows, but support for a Windows variant is planned.
## Installation
### crates.io (non-Windows)
Make sure you have [Rust and its toolchain](https://www.rust-lang.org/tools/install) installed.
```
$ cargo install erdtree
```
### crates.io (Windows)
The Windows version relies on some experimental features in order to properly support hard-link detection. If you want to build from `crates.io` you'll first need to install the nightly toolchain before installing `erdtree`:
```
$ rustup toolchain install nightly-2023-06-11
```
Thereafter:
```
$ cargo +nightly-2023-06-11 install erdtree
```
### Homebrew-core
```
$ brew install erdtree
```
### Scoop
```
$ scoop install erdtree
```
### NetBSD
```
$ pkgin install erdtree
```
### Releases
Binaries for common architectures can be downloaded from latest releases.
### Latest non-release
If you'd like the latest features that are on `master` but aren't yet included as part of a release:
```
$ cargo install --git https://github.com/solidiquis/erdtree --branch master
```
Other means of installation to come.
## Documentation
### Configuration file
If `erdtree`'s out-of-the-box defaults don't meet your specific requirements, you can set your own defaults using a configuration file.
The configuration file currently comes in two flavors: `.erdtreerc` (to be deprecated) and `.erdtree.toml`. If you have both,
`.erdtreerc` will take precedent and `.erdtree.toml` will be disregarded, but please **note that `.erdtreerc` will be deprecated in the near future.** There is
no reason to have both.
#### TOML file
`erdtree` will look for `.erdtree.toml` in any of the following locations:
On Unix-systems:
```
$ERDTREE_TOML_PATH
$XDG_CONFIG_HOME/erdtree/.erdtree.toml
$XDG_CONFIG_HOME/.erdtree.toml
$HOME/.config/erdtree/.erdtree.toml
$HOME/.erdtree.toml
```
On Windows:
```
%APPDATA%\erdtree\.erdtree.toml
```
[Here](example/.erdtree.toml) and below is an example of a valid `.erdtree.toml`:
```toml
icons = true
human = true
# Compute file sizes like `du`
# e.g. `erd --config du`
[du]
disk_usage = "block"
icons = true
layout = "flat"
no-ignore = true
no-git = true
hidden = true
level = 1
# Do as `ls -l`
# e.g. `erd --config ls`
[ls]
icons = true
human = true
level = 1
suppress-size = true
long = true
# How many lines of Rust are in this code base?
# e.g. `erd --config rs`
[rs]
disk-usage = "line"
level = 1
pattern = "\\.rs$"
```
`.erdtree.toml` supports multiple configurations. The top-level table is the main config that will be applied without additional arguments.
If you wish to use a separate configuration, create a named table like `du` above, set your arguments, and invoke it like so:
```
$ erd --config du
# equivalent to
$ erd --disk-usage block --icons --layout flat --no-ignore --no-git --hidden --level 1
```
As far as the arguments go there are only three rules you need to be aware of:
1. `.erdtree.toml` only accepts long-named arguments without the preceding "--".
2. Types are enforced, so numbers are expected to be numbers, booleans are expected to be booleans, strings are expected to be strings, and so on and so forth.
3. `snake_case` and `kebap-case` works.
#### .erdtreerc
`erdtree` will look for a configuration file in any of the following locations:
On Linux/Mac/Unix-like:
- `$ERDTREE_CONFIG_PATH`
- `$XDG_CONFIG_HOME/erdtree/.erdtreerc`
- `$XDG_CONFIG_HOME/.erdtreerc`
- `$HOME/.config/erdtree/.erdtreerc`
- `$HOME/.erdtreerc`
On Windows:
- `$ERDTREE_CONFIG_PATH`
- `%APPDATA%\erdtree\.erdtreerc`
The format of a config file is as follows:
- Every line is an `erdtree` option/argument.
- Lines starting with `#` are considered comments and are thus ignored.
Arguments passed to `erdtree` on the command-line will override those found in `.erdtreerc`.
[Click here](example/.erdtreerc) for an example `.erdtreerc`.
**If you have a config that you would like to ignore without deleting you can use `--no-config`.**
### Hardlinks
If multiple hardlinks that point to the same inode are in the same file-tree, all will be included in the output but only one is considered when computing overall disk usage.
### Symlinks
```
-f, --follow
Follow symlinks
```
Symlinks when followed will have their targets (and descendants) counted towards total disk usage, otherwise the size of the symlink itself will be reported.
If a symlink's target happens to be in the same file-tree as the symlink itself, the target and its descendants will not be double-counted towards the total disk-usage.
When a symlink to a directory is followed all of the box-drawing characters of its descendants will be painted in a different color for better visual feedback:
### Disk usage
By default disk usage is reported as the total amount of physical bytes stored on the disk. To get the human-readable form:
```
-H, --human
Print disk usage in human-readable format
```
When using the human-readable form, binary units (e.g. `1 KiB = 1024 B`) are reported by default. If you prefer SI units (`1 KB = 1000 B`) you can use the following:
```
-u, --unit
Report disk usage in binary or SI units
[default: bin]
Possible values:
- bin: Displays disk usage using binary prefixes
- si: Displays disk usage using SI prefixes
```
Additionally, various other disk usage metrics may be used instead of physical bytes. You have the following metrics available:
```
-d, --disk-usage
Print physical or logical file size
[default: physical]
Possible values:
- logical:
How many bytes does a file contain
- physical:
How many actual bytes on disk, taking into account blocks, sparse files, and compression
- line:
How many total lines a file contains
- word:
How many total words a file contains
- block:
How many blocks are allocated to store the file
```
Lastly, if you'd like to omit disk usage from the output:
```
--suppress-size
Omit disk usage from output
```
#### Physical vs logical
Physical size takes into account compression, sparse files, and actual blocks allocated to a particular file.
Logical size just reports the total number of bytes in a file.
#### Matching `du` output
If you want the same exact disk usage reporting as `du`, you can do the following:
```
$ erd --layout flat --disk-usage block --no-ignore --hidden --level
```
or in short-hand
```
$ erd -y flat -d block -i -.
```
#### Word and line count
When opting to report disk usage in either word and line count, unlike `wc`, `erdtree` will make no attempt to count the amount of words or lines for files that cannot
be encoded as a UTF-8 string such as a JPEG file. For cases such as these the line or total word-count will just appear as empty.
Additionally, the word and line-count of directories are the summation of all of the line/word-counts of its descendents.
### Layouts
`erdtree` comes with four layouts:
```
-y, --layout
Which kind of layout to use when rendering the output
[default: regular]
Possible values:
- regular: Outputs the tree with the root node at the bottom of the output
- inverted: Outputs the tree with the root node at the top of the output
- flat: Outputs a flat layout using paths rather than an ASCII tree
- iflat: Outputs an inverted flat layout with the root at the top of the output
```
* The `inverted` layout a more traditional `tree`-like layout where the root node is at the very top of the output.
* The `regular` layout is a tree with the root node at the bottom of the output for quick information about total disk usage.
* The `flat` layout is a tree-less output that more closely resembles `du`.
### gitignore
```
-i, --no-ignore
Do not respect .gitignore files
```
`.gitignore` is respected by default but can be disregarded with the above argument. `.gitignore` rules are also respected on a per directory basis, so
every directory that is encountered during traversal that has a `.gitignore` will also be considered.
If `.gitignore` is respected any file that is ignored will not be included in the total disk usage.
### Hidden files
```
-., --hidden
Show hidden files
--no-git
Disable traversal of .git directory when traversing hidden files
```
Hidden files ignored by default but can be included with `-., --hidden`. If opting in to show hidden files `.git` is included; to exclude
it use `--no-git`.
If hidden files are ignored it will not be included in the total disk usage.
### Icons
```
-I, --icons Display file icons
```
Icons are an opt-in feature because for icons to render properly it is required that the font you have hooked up to your terminal emulator contains the glyphs necessary to properly render icons.
If your icons look something like this:
this means that the font you are using doesn't include the relevant glyphs. To resolve this issue download a [NerdFont](https://www.nerdfonts.com/) and hook it up to your terminal emulator.
### Maximum depth
Directories are fully traversed by default. To limit the maximum depth:
```
-L, --level
Maximum depth to display
```
Limiting the maximum depth to display will not affect the total disk usage report nor the file count report.
### Pruning empty directories
Sometimes empty directories may appear in the output. To remove them:
```
-P, --prune
Remove empty directories from output
```
### Sorting
Various sorting methods are provided:
```
-s, --sort
How to sort entries
[default: size]
Possible values:
- name: Sort entries by file name in lexicographical order
- rname: Sort entries by file name in reversed lexicographical order
- size: Sort entries by size smallest to largest, top to bottom
- rsize: Sort entries by size largest to smallest, bottom to top
- access: Sort entries by newer to older Accessing Date
- raccess: Sort entries by older to newer Accessing Date
- create: Sort entries by newer to older Creation Date
- rcreate: Sort entries by older to newer Creation Date
- mod: Sort entries by newer to older Alteration Date
- rmod: Sort entries by older to newer Alteration Date
--dir-order
Sort directories before or after all other file types
[default: none]
Possible values:
- none: Directories are ordered as if they were regular nodes
- first: Sort directories above files
- last: Sort directories below files
```
`--dir-order` and `--sort` acan be used independently of each other.
### Directories only
You output only directories with:
```
--dirs-only
Only print directories
```
This will not affect total disk usage.
### Long view
Currently only available on Unix-like platforms. Support for Windows is planned.
`erdtree` supports an `ls -l` like long-view:
```
-l, --long
Show extended metadata and attributes
--group
Show file's groups
--ino
Show each file's ino
--nlink
Show the total number of hardlinks to the underlying inode
--octal
Show permissions in numeric octal format instead of symbolic
--time
Which kind of timestamp to use; modified by default
Possible values:
- create: Time created (alias: ctime)
- access: Time last accessed (alias: atime)
- mod: Time last modified (alias: mtime)
--time-format
Which format to use for the timestamp; default by default
Possible values:
- iso:
Timestamp formatted following the iso8601, with slight differences and the time-zone omitted
- iso-strict:
Timestamp formatted following the exact iso8601 specifications
- short:
Timestamp only shows date without time in YYYY-MM-DD format
- default:
Timestamp is shown in DD MMM HH:MM format
```
By default the columns shown in the order of left to right are:
* [permissions](https://en.wikipedia.org/wiki/File-system_permissions#Notation_of_traditional_Unix_permissions) in symbolic notation
* The file owner
* The date the file was last modified (or created or last accessed)
### Regular expressions and globbing
Filtering for particular files using a regular expression or glob is supported using the following:
```
-p, --pattern
Regular expression (or glob if '--glob' or '--iglob' is used) used to match files
--glob
Enables glob based searching
--iglob
Enables case-insensitive glob based searching
-t, --file-type
Restrict regex or glob search to a particular file-type
Possible values:
- file: A regular file
- dir: A directory
- link: A symlink
```
If `--file-type` is not provided when filtering, regular files (`file`) is the default.
Additionally, **any file that is filtered out will be excluded from the total disk usage**.
Lastly, when applying a regular expression or glob to directories, all of its descendents regardless of file-type will be included in the output.
If you wish to only show directories you may use `--dirs-only`.
References:
* [Globbing rules](https://git-scm.com/docs/gitignore#_pattern_format)
* [Regular expressions](https://docs.rs/regex/latest/regex/#syntax)
### Truncating output
In instances where the output does not fit the terminal emulator's window, the output itself may be rendered incoherently:
In these situations the following may be used:
```
--truncate
Truncate output to fit terminal emulator window
```
### Redirecting output and colorization
By default colorization of the output is enabled if stdout is found to be a tty. If the output is not a tty such in the case of redirection to a file or piping to
another command then colorization is disabled.
If, however, the default behavior doesn't suit your needs you have control over the modes of colorization:
```
-C, --color
Mode of coloring output
[default: auto]
Possible values:
- none: Print plainly without ANSI escapes
- auto: Attempt to colorize output
- force: Turn on colorization always
```
`erdtree` also supports [NO_COLOR](https://no-color.org/).
### Parallelism
The amount of threads used by `erdtree` can be adjusted with the following:
```
-T, --threads Number of threads to use [default: 3]
```
#### Why parallelism
A common question that gets asked is how parallelism benefits disk reads when filesystem I/O is processed serially.
While this is true, parallelism still results in improved throughput due to the fact that disks have a [queue depth](https://en.wikipedia.org/wiki/IOPS)
that, when saturated, allows requests to be processed in aggregate keeping the disk busy as opposed to having it wait on `erdtree` to do CPU-bound processing
in between requests. Additionally these threads aren't just parallelizing disk reads, they're also parallelizing the processing of the retrieved data.
It should be noted however that performance, as a function of thread-count, is asymptotic in nature (see [Amdahl's Law](https://en.wikipedia.org/wiki/Amdahl%27s_law))
so you'll quickly reach a point of dimishing returns after a certain thread-count threshold as you'd be paying the cost of managing a larger threadpool with no added benefit.
For empirical data on the subject checkout [this article](https://pkolaczk.github.io/disk-parallelism/).
### Completions
`--completions` is used to generate auto-completions for common shells so that the `tab` key can attempt to complete your command or give you hints; where you place the output highly depends on your shell as well as your setup. In my environment where I use `zshell` with `oh-my-zsh`, I would install completions like so:
```
$ et --completions zsh > ~/.oh-my-zsh/completions/_erd
$ source ~/.zshrc
```
### Same filesystem
If you are traversing a directory that contains mount points to other filesystems that you do not wish to traverse, use the following:
```
-x, --one-file-system
Prevent traversal into directories that are on different filesystems
```
## Rules for contributing
For rules on how to contribute please refer to [CONTRIBUTING.md](CONTRIBUTING.md).
## Security policy
For information regarding `erdtree`'s security policy and how to report a security vulnerability please refer to [SECURITY_POLICY.md](SECURITY.md)
## Comparisons against similar programs
It goes without saying that the following programs are all amazing in their own right and were highly influential in `erdtree`'s development. While each of the following are highly
specialized in acting as modern replacements for their Unix progenitors, `erdtree` aims to take bits and pieces of each that people use most frequently and assemble them into a unified highly practical tool.
No case will be made as to why `erdtree` should be preferred over X, Y, or Z, but because of some notable similarities with the following programs it is worth a brief
comparison.
### [exa](https://github.com/ogham/exa)
`exa` and `erdtree` are similar in that they both have tree-views and show information about permissions, owners, groups, etc..
The disadvantage of `exa`, however, is that it [does not provide information about the disk usages of directories](https://github.com/ogham/exa/issues/91), which
also makes sorting files by size a little dubious. The advantage `exa` has over `erdtree`, however, is in the fact that `exa` is much more comprehensive as an `ls` replacement.
Both tools are complimentary to one another and it is encouraged that you have both in your toolkit.
### [dua](https://github.com/Byron/dua-cli)
`dua` is a fantastic interactive disk usage tool that serves as a modern alternative to
[ncdu](https://en.wikipedia.org/wiki/Ncdu). If you're in the mood for something interactive and solely focused on disk usage then `dua` might suit you more.
If you're interested in file permissions and doing quick static analysis of your disk usage without spinning up an entire interactive UI then perhaps consider `erdtree`.
### [dust](https://github.com/bootandy/dust)
`dust` is another fantastic tool that is closer in geneology to the traditional `du` command. If you're strictly looking for
a modern replacement to `du` then `dust` is a great choice.
### [fd](https://github.com/sharkdp/fd)
`fd` is much more comprehensive as a general finder tool, offering itself as a modern replacement to `find`. If you're looking for more granularity in your ability to search beyond just globbing, regular
expressions, and the three basic file types (files, directories, and symlinks) then `fd` is the optimal choice.
## Questions you might have
_Q: Why did you make this? It's totally unnecessary._
A: Ennui.
_Q: Why is it called erdtree?_
A: It's a reference to an object of worship in Elden Ring.
_Q: Is it any good?_
A: Yes.
_Q: Why is there no mention of this project being blazingly fast or written in Rust? Is it slow or something?_
A: Okay fine. `erdtree` is written in Rust and is blazingly fast.
