//! Read calibration data from BMP180 sensor
//!
//! This example dumps the calibration data from a BMP180 sensor
//!
//! The following wiring is assumed:
//! - SDA => GPIO1
//! - SCL => GPIO2

#![no_std]
#![no_main]

use esp32c3_hal::{clock::ClockControl, gpio::IO, i2c::I2C, peripherals::Peripherals, prelude::*};
use esp_backtrace as _;
use esp_println::println;

#[entry]
fn main() -> ! {
    let peripherals = Peripherals::take();
    let system = peripherals.SYSTEM.split();
    let clocks = ClockControl::boot_defaults(system.clock_control).freeze();

    let io = IO::new(peripherals.GPIO, peripherals.IO_MUX);

    // Create a new peripheral object with the described wiring
    // and standard I2C clock speed
    let mut i2c = I2C::new(
        peripherals.I2C0,
        io.pins.gpio1,
        io.pins.gpio2,
        100u32.kHz(),
        &clocks,
    );

    loop {
        let mut data = [0u8; 22];
        i2c.write_read(0x77, &[0xaa], &mut data).ok();

        println!("{:02x?}", data);
    }
}