#[repr(C)]
#[cfg_attr(feature = "impl-register-debug", derive(Debug))]
#[doc = "Register block"]
pub struct RegisterBlock {
    t: [T; 2],
    wdtconfig0: WDTCONFIG0,
    wdtconfig1: WDTCONFIG1,
    wdtconfig2: WDTCONFIG2,
    wdtconfig3: WDTCONFIG3,
    wdtconfig4: WDTCONFIG4,
    wdtconfig5: WDTCONFIG5,
    wdtfeed: WDTFEED,
    wdtwprotect: WDTWPROTECT,
    rtccalicfg: RTCCALICFG,
    rtccalicfg1: RTCCALICFG1,
    int_ena: INT_ENA,
    int_raw: INT_RAW,
    int_st: INT_ST,
    int_clr: INT_CLR,
    rtccalicfg2: RTCCALICFG2,
    _reserved16: [u8; 0x74],
    ntimers_date: NTIMERS_DATE,
    regclk: REGCLK,
}
impl RegisterBlock {
    #[doc = "0x00..0x48 - Cluster T%s, containing T?CONFIG, T?LO, T?HI, T?UPDATE, T?ALARMLO, T?ALARMHI, T?LOADLO, T?LOADHI, T?LOAD"]
    #[inline(always)]
    pub const fn t(&self, n: usize) -> &T {
        &self.t[n]
    }
    #[doc = "Iterator for array of:"]
    #[doc = "0x00..0x48 - Cluster T%s, containing T?CONFIG, T?LO, T?HI, T?UPDATE, T?ALARMLO, T?ALARMHI, T?LOADLO, T?LOADHI, T?LOAD"]
    #[inline(always)]
    pub fn t_iter(&self) -> impl Iterator<Item = &T> {
        self.t.iter()
    }
    #[doc = "0x48 - Watchdog timer configuration register"]
    #[inline(always)]
    pub const fn wdtconfig0(&self) -> &WDTCONFIG0 {
        &self.wdtconfig0
    }
    #[doc = "0x4c - Watchdog timer prescaler register"]
    #[inline(always)]
    pub const fn wdtconfig1(&self) -> &WDTCONFIG1 {
        &self.wdtconfig1
    }
    #[doc = "0x50 - Watchdog timer stage 0 timeout value"]
    #[inline(always)]
    pub const fn wdtconfig2(&self) -> &WDTCONFIG2 {
        &self.wdtconfig2
    }
    #[doc = "0x54 - Watchdog timer stage 1 timeout value"]
    #[inline(always)]
    pub const fn wdtconfig3(&self) -> &WDTCONFIG3 {
        &self.wdtconfig3
    }
    #[doc = "0x58 - Watchdog timer stage 2 timeout value"]
    #[inline(always)]
    pub const fn wdtconfig4(&self) -> &WDTCONFIG4 {
        &self.wdtconfig4
    }
    #[doc = "0x5c - Watchdog timer stage 3 timeout value"]
    #[inline(always)]
    pub const fn wdtconfig5(&self) -> &WDTCONFIG5 {
        &self.wdtconfig5
    }
    #[doc = "0x60 - Write to feed the watchdog timer"]
    #[inline(always)]
    pub const fn wdtfeed(&self) -> &WDTFEED {
        &self.wdtfeed
    }
    #[doc = "0x64 - Watchdog write protect register"]
    #[inline(always)]
    pub const fn wdtwprotect(&self) -> &WDTWPROTECT {
        &self.wdtwprotect
    }
    #[doc = "0x68 - RTC calibration configure register"]
    #[inline(always)]
    pub const fn rtccalicfg(&self) -> &RTCCALICFG {
        &self.rtccalicfg
    }
    #[doc = "0x6c - RTC calibration configure1 register"]
    #[inline(always)]
    pub const fn rtccalicfg1(&self) -> &RTCCALICFG1 {
        &self.rtccalicfg1
    }
    #[doc = "0x70 - Interrupt enable bits"]
    #[inline(always)]
    pub const fn int_ena(&self) -> &INT_ENA {
        &self.int_ena
    }
    #[doc = "0x74 - Raw interrupt status"]
    #[inline(always)]
    pub const fn int_raw(&self) -> &INT_RAW {
        &self.int_raw
    }
    #[doc = "0x78 - Masked interrupt status"]
    #[inline(always)]
    pub const fn int_st(&self) -> &INT_ST {
        &self.int_st
    }
    #[doc = "0x7c - Interrupt clear bits"]
    #[inline(always)]
    pub const fn int_clr(&self) -> &INT_CLR {
        &self.int_clr
    }
    #[doc = "0x80 - Timer group calibration register"]
    #[inline(always)]
    pub const fn rtccalicfg2(&self) -> &RTCCALICFG2 {
        &self.rtccalicfg2
    }
    #[doc = "0xf8 - Timer version control register"]
    #[inline(always)]
    pub const fn ntimers_date(&self) -> &NTIMERS_DATE {
        &self.ntimers_date
    }
    #[doc = "0xfc - Timer group clock gate register"]
    #[inline(always)]
    pub const fn regclk(&self) -> &REGCLK {
        &self.regclk
    }
}
#[doc = "Cluster T%s, containing T?CONFIG, T?LO, T?HI, T?UPDATE, T?ALARMLO, T?ALARMHI, T?LOADLO, T?LOADHI, T?LOAD"]
pub use self::t::T;
#[doc = r"Cluster"]
#[doc = "Cluster T%s, containing T?CONFIG, T?LO, T?HI, T?UPDATE, T?ALARMLO, T?ALARMHI, T?LOADLO, T?LOADHI, T?LOAD"]
pub mod t;
#[doc = "WDTCONFIG0 (rw) register accessor: Watchdog timer configuration register\n\nYou can [`read`](crate::Reg::read) this register and get [`wdtconfig0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`wdtconfig0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@wdtconfig0`] module"]
pub type WDTCONFIG0 = crate::Reg<wdtconfig0::WDTCONFIG0_SPEC>;
#[doc = "Watchdog timer configuration register"]
pub mod wdtconfig0;
#[doc = "WDTCONFIG1 (rw) register accessor: Watchdog timer prescaler register\n\nYou can [`read`](crate::Reg::read) this register and get [`wdtconfig1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`wdtconfig1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@wdtconfig1`] module"]
pub type WDTCONFIG1 = crate::Reg<wdtconfig1::WDTCONFIG1_SPEC>;
#[doc = "Watchdog timer prescaler register"]
pub mod wdtconfig1;
#[doc = "WDTCONFIG2 (rw) register accessor: Watchdog timer stage 0 timeout value\n\nYou can [`read`](crate::Reg::read) this register and get [`wdtconfig2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`wdtconfig2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@wdtconfig2`] module"]
pub type WDTCONFIG2 = crate::Reg<wdtconfig2::WDTCONFIG2_SPEC>;
#[doc = "Watchdog timer stage 0 timeout value"]
pub mod wdtconfig2;
#[doc = "WDTCONFIG3 (rw) register accessor: Watchdog timer stage 1 timeout value\n\nYou can [`read`](crate::Reg::read) this register and get [`wdtconfig3::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`wdtconfig3::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@wdtconfig3`] module"]
pub type WDTCONFIG3 = crate::Reg<wdtconfig3::WDTCONFIG3_SPEC>;
#[doc = "Watchdog timer stage 1 timeout value"]
pub mod wdtconfig3;
#[doc = "WDTCONFIG4 (rw) register accessor: Watchdog timer stage 2 timeout value\n\nYou can [`read`](crate::Reg::read) this register and get [`wdtconfig4::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`wdtconfig4::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@wdtconfig4`] module"]
pub type WDTCONFIG4 = crate::Reg<wdtconfig4::WDTCONFIG4_SPEC>;
#[doc = "Watchdog timer stage 2 timeout value"]
pub mod wdtconfig4;
#[doc = "WDTCONFIG5 (rw) register accessor: Watchdog timer stage 3 timeout value\n\nYou can [`read`](crate::Reg::read) this register and get [`wdtconfig5::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`wdtconfig5::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@wdtconfig5`] module"]
pub type WDTCONFIG5 = crate::Reg<wdtconfig5::WDTCONFIG5_SPEC>;
#[doc = "Watchdog timer stage 3 timeout value"]
pub mod wdtconfig5;
#[doc = "WDTFEED (w) register accessor: Write to feed the watchdog timer\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`wdtfeed::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@wdtfeed`] module"]
pub type WDTFEED = crate::Reg<wdtfeed::WDTFEED_SPEC>;
#[doc = "Write to feed the watchdog timer"]
pub mod wdtfeed;
#[doc = "WDTWPROTECT (rw) register accessor: Watchdog write protect register\n\nYou can [`read`](crate::Reg::read) this register and get [`wdtwprotect::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`wdtwprotect::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@wdtwprotect`] module"]
pub type WDTWPROTECT = crate::Reg<wdtwprotect::WDTWPROTECT_SPEC>;
#[doc = "Watchdog write protect register"]
pub mod wdtwprotect;
#[doc = "RTCCALICFG (rw) register accessor: RTC calibration configure register\n\nYou can [`read`](crate::Reg::read) this register and get [`rtccalicfg::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rtccalicfg::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rtccalicfg`] module"]
pub type RTCCALICFG = crate::Reg<rtccalicfg::RTCCALICFG_SPEC>;
#[doc = "RTC calibration configure register"]
pub mod rtccalicfg;
#[doc = "RTCCALICFG1 (r) register accessor: RTC calibration configure1 register\n\nYou can [`read`](crate::Reg::read) this register and get [`rtccalicfg1::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rtccalicfg1`] module"]
pub type RTCCALICFG1 = crate::Reg<rtccalicfg1::RTCCALICFG1_SPEC>;
#[doc = "RTC calibration configure1 register"]
pub mod rtccalicfg1;
#[doc = "INT_ENA (rw) register accessor: Interrupt enable bits\n\nYou can [`read`](crate::Reg::read) this register and get [`int_ena::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_ena::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_ena`] module"]
pub type INT_ENA = crate::Reg<int_ena::INT_ENA_SPEC>;
#[doc = "Interrupt enable bits"]
pub mod int_ena;
#[doc = "INT_RAW (rw) register accessor: Raw interrupt status\n\nYou can [`read`](crate::Reg::read) this register and get [`int_raw::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_raw::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_raw`] module"]
pub type INT_RAW = crate::Reg<int_raw::INT_RAW_SPEC>;
#[doc = "Raw interrupt status"]
pub mod int_raw;
#[doc = "INT_ST (r) register accessor: Masked interrupt status\n\nYou can [`read`](crate::Reg::read) this register and get [`int_st::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_st`] module"]
pub type INT_ST = crate::Reg<int_st::INT_ST_SPEC>;
#[doc = "Masked interrupt status"]
pub mod int_st;
#[doc = "INT_CLR (w) register accessor: Interrupt clear bits\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_clr::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_clr`] module"]
pub type INT_CLR = crate::Reg<int_clr::INT_CLR_SPEC>;
#[doc = "Interrupt clear bits"]
pub mod int_clr;
#[doc = "RTCCALICFG2 (rw) register accessor: Timer group calibration register\n\nYou can [`read`](crate::Reg::read) this register and get [`rtccalicfg2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rtccalicfg2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rtccalicfg2`] module"]
pub type RTCCALICFG2 = crate::Reg<rtccalicfg2::RTCCALICFG2_SPEC>;
#[doc = "Timer group calibration register"]
pub mod rtccalicfg2;
#[doc = "NTIMERS_DATE (rw) register accessor: Timer version control register\n\nYou can [`read`](crate::Reg::read) this register and get [`ntimers_date::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ntimers_date::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ntimers_date`] module"]
pub type NTIMERS_DATE = crate::Reg<ntimers_date::NTIMERS_DATE_SPEC>;
#[doc = "Timer version control register"]
pub mod ntimers_date;
#[doc = "REGCLK (rw) register accessor: Timer group clock gate register\n\nYou can [`read`](crate::Reg::read) this register and get [`regclk::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`regclk::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@regclk`] module"]
pub type REGCLK = crate::Reg<regclk::REGCLK_SPEC>;
#[doc = "Timer group clock gate register"]
pub mod regclk;