#[repr(C)]
#[cfg_attr(feature = "impl-register-debug", derive(Debug))]
#[doc = "Register block"]
pub struct RegisterBlock {
    conf0: CONF0,
    int_raw: INT_RAW,
    int_st: INT_ST,
    int_ena: INT_ENA,
    int_clr: INT_CLR,
    app_int_set: APP_INT_SET,
    conf1: CONF1,
    state0: STATE0,
    state1: STATE1,
    escape_conf: ESCAPE_CONF,
    hung_conf: HUNG_CONF,
    ack_num: ACK_NUM,
    rx_head: RX_HEAD,
    quick_sent: QUICK_SENT,
    reg_q: [REG_Q; 7],
    esc_conf: [ESC_CONF; 4],
    pkt_thres: PKT_THRES,
    date: DATE,
}
impl RegisterBlock {
    #[doc = "0x00 - UHCI configuration register"]
    #[inline(always)]
    pub const fn conf0(&self) -> &CONF0 {
        &self.conf0
    }
    #[doc = "0x04 - Raw interrupt status"]
    #[inline(always)]
    pub const fn int_raw(&self) -> &INT_RAW {
        &self.int_raw
    }
    #[doc = "0x08 - Masked interrupt status"]
    #[inline(always)]
    pub const fn int_st(&self) -> &INT_ST {
        &self.int_st
    }
    #[doc = "0x0c - Interrupt enable bits"]
    #[inline(always)]
    pub const fn int_ena(&self) -> &INT_ENA {
        &self.int_ena
    }
    #[doc = "0x10 - Interrupt clear bits"]
    #[inline(always)]
    pub const fn int_clr(&self) -> &INT_CLR {
        &self.int_clr
    }
    #[doc = "0x14 - Software interrupt trigger source"]
    #[inline(always)]
    pub const fn app_int_set(&self) -> &APP_INT_SET {
        &self.app_int_set
    }
    #[doc = "0x18 - UHCI configuration register"]
    #[inline(always)]
    pub const fn conf1(&self) -> &CONF1 {
        &self.conf1
    }
    #[doc = "0x1c - UHCI receive status"]
    #[inline(always)]
    pub const fn state0(&self) -> &STATE0 {
        &self.state0
    }
    #[doc = "0x20 - UHCI transmit status"]
    #[inline(always)]
    pub const fn state1(&self) -> &STATE1 {
        &self.state1
    }
    #[doc = "0x24 - Escape character configuration"]
    #[inline(always)]
    pub const fn escape_conf(&self) -> &ESCAPE_CONF {
        &self.escape_conf
    }
    #[doc = "0x28 - Timeout configuration"]
    #[inline(always)]
    pub const fn hung_conf(&self) -> &HUNG_CONF {
        &self.hung_conf
    }
    #[doc = "0x2c - UHCI ACK number configuration"]
    #[inline(always)]
    pub const fn ack_num(&self) -> &ACK_NUM {
        &self.ack_num
    }
    #[doc = "0x30 - UHCI packet header register"]
    #[inline(always)]
    pub const fn rx_head(&self) -> &RX_HEAD {
        &self.rx_head
    }
    #[doc = "0x34 - UHCI quick send configuration register"]
    #[inline(always)]
    pub const fn quick_sent(&self) -> &QUICK_SENT {
        &self.quick_sent
    }
    #[doc = "0x38..0x70 - Cluster REG_Q%s, containing REG_Q?_WORD0, REG_Q?_WORD1"]
    #[inline(always)]
    pub const fn reg_q(&self, n: usize) -> &REG_Q {
        &self.reg_q[n]
    }
    #[doc = "Iterator for array of:"]
    #[doc = "0x38..0x70 - Cluster REG_Q%s, containing REG_Q?_WORD0, REG_Q?_WORD1"]
    #[inline(always)]
    pub fn reg_q_iter(&self) -> impl Iterator<Item = &REG_Q> {
        self.reg_q.iter()
    }
    #[doc = "0x70..0x80 - Escape sequence configuration register %s"]
    #[inline(always)]
    pub const fn esc_conf(&self, n: usize) -> &ESC_CONF {
        &self.esc_conf[n]
    }
    #[doc = "Iterator for array of:"]
    #[doc = "0x70..0x80 - Escape sequence configuration register %s"]
    #[inline(always)]
    pub fn esc_conf_iter(&self) -> impl Iterator<Item = &ESC_CONF> {
        self.esc_conf.iter()
    }
    #[doc = "0x80 - Configure register for packet length"]
    #[inline(always)]
    pub const fn pkt_thres(&self) -> &PKT_THRES {
        &self.pkt_thres
    }
    #[doc = "0x84 - UHCI version control register"]
    #[inline(always)]
    pub const fn date(&self) -> &DATE {
        &self.date
    }
}
#[doc = "CONF0 (rw) register accessor: UHCI configuration register\n\nYou can [`read`](crate::Reg::read) this register and get [`conf0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`conf0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@conf0`] module"]
pub type CONF0 = crate::Reg<conf0::CONF0_SPEC>;
#[doc = "UHCI configuration register"]
pub mod conf0;
#[doc = "INT_RAW (rw) register accessor: Raw interrupt status\n\nYou can [`read`](crate::Reg::read) this register and get [`int_raw::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_raw::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_raw`] module"]
pub type INT_RAW = crate::Reg<int_raw::INT_RAW_SPEC>;
#[doc = "Raw interrupt status"]
pub mod int_raw;
#[doc = "INT_ST (r) register accessor: Masked interrupt status\n\nYou can [`read`](crate::Reg::read) this register and get [`int_st::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_st`] module"]
pub type INT_ST = crate::Reg<int_st::INT_ST_SPEC>;
#[doc = "Masked interrupt status"]
pub mod int_st;
#[doc = "INT_ENA (rw) register accessor: Interrupt enable bits\n\nYou can [`read`](crate::Reg::read) this register and get [`int_ena::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_ena::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_ena`] module"]
pub type INT_ENA = crate::Reg<int_ena::INT_ENA_SPEC>;
#[doc = "Interrupt enable bits"]
pub mod int_ena;
#[doc = "INT_CLR (w) register accessor: Interrupt clear bits\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_clr::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_clr`] module"]
pub type INT_CLR = crate::Reg<int_clr::INT_CLR_SPEC>;
#[doc = "Interrupt clear bits"]
pub mod int_clr;
#[doc = "APP_INT_SET (w) register accessor: Software interrupt trigger source\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`app_int_set::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@app_int_set`] module"]
pub type APP_INT_SET = crate::Reg<app_int_set::APP_INT_SET_SPEC>;
#[doc = "Software interrupt trigger source"]
pub mod app_int_set;
#[doc = "CONF1 (rw) register accessor: UHCI configuration register\n\nYou can [`read`](crate::Reg::read) this register and get [`conf1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`conf1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@conf1`] module"]
pub type CONF1 = crate::Reg<conf1::CONF1_SPEC>;
#[doc = "UHCI configuration register"]
pub mod conf1;
#[doc = "STATE0 (r) register accessor: UHCI receive status\n\nYou can [`read`](crate::Reg::read) this register and get [`state0::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@state0`] module"]
pub type STATE0 = crate::Reg<state0::STATE0_SPEC>;
#[doc = "UHCI receive status"]
pub mod state0;
#[doc = "STATE1 (r) register accessor: UHCI transmit status\n\nYou can [`read`](crate::Reg::read) this register and get [`state1::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@state1`] module"]
pub type STATE1 = crate::Reg<state1::STATE1_SPEC>;
#[doc = "UHCI transmit status"]
pub mod state1;
#[doc = "ESCAPE_CONF (rw) register accessor: Escape character configuration\n\nYou can [`read`](crate::Reg::read) this register and get [`escape_conf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`escape_conf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@escape_conf`] module"]
pub type ESCAPE_CONF = crate::Reg<escape_conf::ESCAPE_CONF_SPEC>;
#[doc = "Escape character configuration"]
pub mod escape_conf;
#[doc = "HUNG_CONF (rw) register accessor: Timeout configuration\n\nYou can [`read`](crate::Reg::read) this register and get [`hung_conf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`hung_conf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@hung_conf`] module"]
pub type HUNG_CONF = crate::Reg<hung_conf::HUNG_CONF_SPEC>;
#[doc = "Timeout configuration"]
pub mod hung_conf;
#[doc = "ACK_NUM (rw) register accessor: UHCI ACK number configuration\n\nYou can [`read`](crate::Reg::read) this register and get [`ack_num::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ack_num::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ack_num`] module"]
pub type ACK_NUM = crate::Reg<ack_num::ACK_NUM_SPEC>;
#[doc = "UHCI ACK number configuration"]
pub mod ack_num;
#[doc = "RX_HEAD (r) register accessor: UHCI packet header register\n\nYou can [`read`](crate::Reg::read) this register and get [`rx_head::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rx_head`] module"]
pub type RX_HEAD = crate::Reg<rx_head::RX_HEAD_SPEC>;
#[doc = "UHCI packet header register"]
pub mod rx_head;
#[doc = "QUICK_SENT (rw) register accessor: UHCI quick send configuration register\n\nYou can [`read`](crate::Reg::read) this register and get [`quick_sent::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`quick_sent::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@quick_sent`] module"]
pub type QUICK_SENT = crate::Reg<quick_sent::QUICK_SENT_SPEC>;
#[doc = "UHCI quick send configuration register"]
pub mod quick_sent;
#[doc = "Cluster REG_Q%s, containing REG_Q?_WORD0, REG_Q?_WORD1"]
pub use self::reg_q::REG_Q;
#[doc = r"Cluster"]
#[doc = "Cluster REG_Q%s, containing REG_Q?_WORD0, REG_Q?_WORD1"]
pub mod reg_q;
#[doc = "ESC_CONF (rw) register accessor: Escape sequence configuration register %s\n\nYou can [`read`](crate::Reg::read) this register and get [`esc_conf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`esc_conf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@esc_conf`] module"]
pub type ESC_CONF = crate::Reg<esc_conf::ESC_CONF_SPEC>;
#[doc = "Escape sequence configuration register %s"]
pub mod esc_conf;
#[doc = "PKT_THRES (rw) register accessor: Configure register for packet length\n\nYou can [`read`](crate::Reg::read) this register and get [`pkt_thres::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`pkt_thres::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@pkt_thres`] module"]
pub type PKT_THRES = crate::Reg<pkt_thres::PKT_THRES_SPEC>;
#[doc = "Configure register for packet length"]
pub mod pkt_thres;
#[doc = "DATE (rw) register accessor: UHCI version control register\n\nYou can [`read`](crate::Reg::read) this register and get [`date::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`date::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@date`] module"]
pub type DATE = crate::Reg<date::DATE_SPEC>;
#[doc = "UHCI version control register"]
pub mod date;