// ========================================================== // Utility functions // // Design and implementation by // - Floris van den Berg (flvdberg@wxs.nl) // - Hervé Drolon // - Ryan Rubley (ryan@lostreality.org) // - Mihail Naydenov (mnaydenov@users.sourceforge.net) // // This file is part of FreeImage 3 // // COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTY // OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES // THAT THE COVERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE // OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED // CODE IS WITH YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT // THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY // SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL // PART OF THIS LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER // THIS DISCLAIMER. // // Use at your own risk! // ========================================================== #ifndef FREEIMAGE_UTILITIES_H #define FREEIMAGE_UTILITIES_H // ========================================================== // Standard includes used by the library // ========================================================== #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include // ========================================================== // Bitmap palette and pixels alignment // ========================================================== #define FIBITMAP_ALIGNMENT 16 // We will use a 16 bytes alignment boundary // Memory allocation on a specified alignment boundary // defined in BitmapAccess.cpp void* FreeImage_Aligned_Malloc(size_t amount, size_t alignment); void FreeImage_Aligned_Free(void* mem); #if defined(__cplusplus) extern "C" { #endif /** Allocate a FIBITMAP with possibly no pixel data (i.e. only header data and some or all metadata) @param header_only If TRUE, allocate a 'header only' FIBITMAP, otherwise allocate a full FIBITMAP @param type Image type @param width Image width @param height Image height @param bpp Number of bits per pixel @param red_mask Image red mask @param green_mask Image green mask @param blue_mask Image blue mask @return Returns the allocated FIBITMAP @see FreeImage_AllocateT */ DLL_API FIBITMAP * DLL_CALLCONV FreeImage_AllocateHeaderT(BOOL header_only, FREE_IMAGE_TYPE type, int width, int height, int bpp FI_DEFAULT(8), unsigned red_mask FI_DEFAULT(0), unsigned green_mask FI_DEFAULT(0), unsigned blue_mask FI_DEFAULT(0)); /** Allocate a FIBITMAP of type FIT_BITMAP, with possibly no pixel data (i.e. only header data and some or all metadata) @param header_only If TRUE, allocate a 'header only' FIBITMAP, otherwise allocate a full FIBITMAP @param width Image width @param height Image height @param bpp Number of bits per pixel @param red_mask Image red mask @param green_mask Image green mask @param blue_mask Image blue mask @return Returns the allocated FIBITMAP @see FreeImage_Allocate */ DLL_API FIBITMAP * DLL_CALLCONV FreeImage_AllocateHeader(BOOL header_only, int width, int height, int bpp, unsigned red_mask FI_DEFAULT(0), unsigned green_mask FI_DEFAULT(0), unsigned blue_mask FI_DEFAULT(0)); /** Allocate a FIBITMAP with no pixel data and wrap a user provided pixel buffer @param ext_bits Pointer to external user's pixel buffer @param ext_pitch Pointer to external user's pixel buffer pitch @param type Image type @param width Image width @param height Image height @param bpp Number of bits per pixel @param red_mask Image red mask @param green_mask Image green mask @param blue_mask Image blue mask @return Returns the allocated FIBITMAP @see FreeImage_ConvertFromRawBitsEx */ DLL_API FIBITMAP * DLL_CALLCONV FreeImage_AllocateHeaderForBits(BYTE *ext_bits, unsigned ext_pitch, FREE_IMAGE_TYPE type, int width, int height, int bpp, unsigned red_mask, unsigned green_mask, unsigned blue_mask); /** Helper for 16-bit FIT_BITMAP @see FreeImage_GetRGBMasks */ DLL_API BOOL DLL_CALLCONV FreeImage_HasRGBMasks(FIBITMAP *dib); #if defined(__cplusplus) } #endif // ========================================================== // File I/O structs // ========================================================== // these structs are for file I/O and should not be confused with similar // structs in FreeImage.h which are for in-memory bitmap handling #ifdef _WIN32 #pragma pack(push, 1) #else #pragma pack(1) #endif // _WIN32 typedef struct tagFILE_RGBA { unsigned char r,g,b,a; } FILE_RGBA; typedef struct tagFILE_BGRA { unsigned char b,g,r,a; } FILE_BGRA; typedef struct tagFILE_RGB { unsigned char r,g,b; } FILE_RGB; typedef struct tagFILE_BGR { unsigned char b,g,r; } FILE_BGR; #ifdef _WIN32 #pragma pack(pop) #else #pragma pack() #endif // _WIN32 // ========================================================== // Template utility functions // ========================================================== /// Max function template T MAX(const T &a, const T &b) { return (a > b) ? a: b; } /// Min function template T MIN(const T &a, const T &b) { return (a < b) ? a: b; } /// INPLACESWAP adopted from codeguru.com template void INPLACESWAP(T& a, T& b) { a ^= b; b ^= a; a ^= b; } /// Clamp function template T CLAMP(const T &value, const T &min_value, const T &max_value) { return ((value < min_value) ? min_value : (value > max_value) ? max_value : value); } /** This procedure computes minimum min and maximum max of n numbers using only (3n/2) - 2 comparisons. min = L[i1] and max = L[i2]. ref: Aho A.V., Hopcroft J.E., Ullman J.D., The design and analysis of computer algorithms, Addison-Wesley, Reading, 1974. */ template void MAXMIN(const T* L, long n, T& max, T& min) { long i1, i2, i, j; T x1, x2; long k1, k2; i1 = 0; i2 = 0; min = L[0]; max = L[0]; j = 0; if((n % 2) != 0) j = 1; for(i = j; i < n; i+= 2) { k1 = i; k2 = i+1; x1 = L[k1]; x2 = L[k2]; if(x1 > x2) { k1 = k2; k2 = i; x1 = x2; x2 = L[k2]; } if(x1 < min) { min = x1; i1 = k1; } if(x2 > max) { max = x2; i2 = k2; } } } // ========================================================== // Utility functions // ========================================================== #ifndef _WIN32 inline char* i2a(unsigned i, char *a, unsigned r) { if (i/r > 0) a = i2a(i/r,a,r); *a = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ"[i%r]; return a+1; } /** Transforms integer i into an ascii string and stores the result in a; string is encoded in the base indicated by r. @param i Number to be converted @param a String result @param r Base of value; must be in the range 2 - 36 @return Returns a */ inline char * _itoa(int i, char *a, int r) { r = ((r < 2) || (r > 36)) ? 10 : r; if(i < 0) { *a = '-'; *i2a(-i, a+1, r) = 0; } else *i2a(i, a, r) = 0; return a; } #endif // !_WIN32 inline unsigned char HINIBBLE (unsigned char byte) { return byte & 0xF0; } inline unsigned char LOWNIBBLE (unsigned char byte) { return byte & 0x0F; } inline int CalculateUsedBits(int bits) { int bit_count = 0; unsigned bit = 1; for (unsigned i = 0; i < 32; i++) { if ((bits & bit) == bit) { bit_count++; } bit <<= 1; } return bit_count; } inline unsigned CalculateLine(const unsigned width, const unsigned bitdepth) { return (unsigned)( ((unsigned long long)width * bitdepth + 7) / 8 ); } inline unsigned CalculatePitch(const unsigned line) { return (line + 3) & ~3; } inline unsigned CalculateUsedPaletteEntries(const unsigned bit_count) { if ((bit_count >= 1) && (bit_count <= 8)) { return 1 << bit_count; } return 0; } inline BYTE* CalculateScanLine(BYTE *bits, const unsigned pitch, const int scanline) { return bits ? (bits + ((size_t)pitch * scanline)) : NULL; } // ---------------------------------------------------------- /** Fast generic assign (faster than for loop) @param dst Destination pixel @param src Source pixel @param bytesperpixel # of bytes per pixel */ inline void AssignPixel(BYTE* dst, const BYTE* src, unsigned bytesperpixel) { switch (bytesperpixel) { case 1: // FIT_BITMAP (8-bit) *dst = *src; break; case 2: // FIT_UINT16 / FIT_INT16 / 16-bit *(reinterpret_cast(dst)) = *(reinterpret_cast (src)); break; case 3: // FIT_BITMAP (24-bit) *(reinterpret_cast(dst)) = *(reinterpret_cast (src)); dst[2] = src[2]; break; case 4: // FIT_BITMAP (32-bit) / FIT_UINT32 / FIT_INT32 / FIT_FLOAT *(reinterpret_cast(dst)) = *(reinterpret_cast (src)); break; case 6: // FIT_RGB16 (3 x 16-bit) *(reinterpret_cast(dst)) = *(reinterpret_cast (src)); *(reinterpret_cast(dst + 4)) = *(reinterpret_cast (src + 4)); break; // the rest can be speeded up with int64 case 8: // FIT_RGBA16 (4 x 16-bit) *(reinterpret_cast(dst)) = *(reinterpret_cast (src)); *(reinterpret_cast(dst + 4)) = *(reinterpret_cast (src + 4)); break; case 12: // FIT_RGBF (3 x 32-bit IEEE floating point) *(reinterpret_cast(dst)) = *(reinterpret_cast (src)); *(reinterpret_cast(dst + 4)) = *(reinterpret_cast (src + 4)); *(reinterpret_cast(dst + 8)) = *(reinterpret_cast (src + 8)); break; case 16: // FIT_RGBAF (4 x 32-bit IEEE floating point) *(reinterpret_cast(dst)) = *(reinterpret_cast (src)); *(reinterpret_cast(dst + 4)) = *(reinterpret_cast (src + 4)); *(reinterpret_cast(dst + 8)) = *(reinterpret_cast (src + 8)); *(reinterpret_cast(dst + 12)) = *(reinterpret_cast (src + 12)); break; default: assert(FALSE); } } /** Swap red and blue channels in a 24- or 32-bit dib. @return Returns TRUE if successful, returns FALSE otherwise @see See definition in Conversion.cpp */ BOOL SwapRedBlue32(FIBITMAP* dib); /** Inplace convert CMYK to RGBA.(8- and 16-bit). Alpha is filled with the first extra channel if any or white otherwise. @return Returns TRUE if successful, returns FALSE otherwise @see See definition in Conversion.cpp */ BOOL ConvertCMYKtoRGBA(FIBITMAP* dib); /** Inplace convert CIELab to RGBA (8- and 16-bit). @return Returns TRUE if successful, returns FALSE otherwise @see See definition in Conversion.cpp */ BOOL ConvertLABtoRGB(FIBITMAP* dib); /** RGBA to RGB conversion @see See definition in Conversion.cpp */ FIBITMAP* RemoveAlphaChannel(FIBITMAP* dib); /** Rotate a dib according to Exif info @param dib Input / Output dib to rotate @see Exif.cpp, PluginJPEG.cpp */ void RotateExif(FIBITMAP **dib); // ========================================================== // Big Endian / Little Endian utility functions // ========================================================== inline WORD __SwapUInt16(WORD arg) { #if defined(_MSC_VER) && _MSC_VER >= 1310 return _byteswap_ushort(arg); #elif defined(__i386__) && defined(__GNUC__) __asm__("xchgb %b0, %h0" : "+q" (arg)); return arg; #elif defined(__ppc__) && defined(__GNUC__) WORD result; __asm__("lhbrx %0,0,%1" : "=r" (result) : "r" (&arg), "m" (arg)); return result; #else // swap bytes WORD result; result = ((arg << 8) & 0xFF00) | ((arg >> 8) & 0x00FF); return result; #endif } inline DWORD __SwapUInt32(DWORD arg) { #if defined(_MSC_VER) && _MSC_VER >= 1310 return _byteswap_ulong(arg); #elif defined(__i386__) && defined(__GNUC__) __asm__("bswap %0" : "+r" (arg)); return arg; #elif defined(__ppc__) && defined(__GNUC__) DWORD result; __asm__("lwbrx %0,0,%1" : "=r" (result) : "r" (&arg), "m" (arg)); return result; #else // swap words then bytes DWORD result; result = ((arg & 0x000000FF) << 24) | ((arg & 0x0000FF00) << 8) | ((arg >> 8) & 0x0000FF00) | ((arg >> 24) & 0x000000FF); return result; #endif } inline void SwapShort(WORD *sp) { *sp = __SwapUInt16(*sp); } inline void SwapLong(DWORD *lp) { *lp = __SwapUInt32(*lp); } inline void SwapInt64(UINT64 *arg) { #if defined(_MSC_VER) && _MSC_VER >= 1310 *arg = _byteswap_uint64(*arg); #else union Swap { UINT64 sv; DWORD ul[2]; } tmp, result; tmp.sv = *arg; SwapLong(&tmp.ul[0]); SwapLong(&tmp.ul[1]); result.ul[0] = tmp.ul[1]; result.ul[1] = tmp.ul[0]; *arg = result.sv; #endif } // ========================================================== // Greyscale and color conversion // ========================================================== /** Extract the luminance channel L from a RGBF image. Luminance is calculated from the sRGB model using a D65 white point, using the Rec.709 formula : L = ( 0.2126 * r ) + ( 0.7152 * g ) + ( 0.0722 * b ) Reference : A Standard Default Color Space for the Internet - sRGB. [online] http://www.w3.org/Graphics/Color/sRGB */ #define LUMA_REC709(r, g, b) (0.2126F * r + 0.7152F * g + 0.0722F * b) #define GREY(r, g, b) (BYTE)(LUMA_REC709(r, g, b) + 0.5F) /* #define GREY(r, g, b) (BYTE)(((WORD)r * 77 + (WORD)g * 150 + (WORD)b * 29) >> 8) // .299R + .587G + .114B */ /* #define GREY(r, g, b) (BYTE)(((WORD)r * 169 + (WORD)g * 256 + (WORD)b * 87) >> 9) // .33R + 0.5G + .17B */ /** Convert a RGB 24-bit value to a 16-bit 565 value */ #define RGB565(b, g, r) ((((b) >> 3) << FI16_565_BLUE_SHIFT) | (((g) >> 2) << FI16_565_GREEN_SHIFT) | (((r) >> 3) << FI16_565_RED_SHIFT)) /** Convert a RGB 24-bit value to a 16-bit 555 value */ #define RGB555(b, g, r) ((((b) >> 3) << FI16_555_BLUE_SHIFT) | (((g) >> 3) << FI16_555_GREEN_SHIFT) | (((r) >> 3) << FI16_555_RED_SHIFT)) /** Returns TRUE if the format of a dib is RGB565 */ #define IS_FORMAT_RGB565(dib) ((FreeImage_GetRedMask(dib) == FI16_565_RED_MASK) && (FreeImage_GetGreenMask(dib) == FI16_565_GREEN_MASK) && (FreeImage_GetBlueMask(dib) == FI16_565_BLUE_MASK)) /** Convert a RGB565 or RGB555 RGBQUAD pixel to a WORD */ #define RGBQUAD_TO_WORD(dib, color) (IS_FORMAT_RGB565(dib) ? RGB565((color)->rgbBlue, (color)->rgbGreen, (color)->rgbRed) : RGB555((color)->rgbBlue, (color)->rgbGreen, (color)->rgbRed)) /** Create a greyscale palette */ #define CREATE_GREYSCALE_PALETTE(palette, entries) \ for (unsigned i = 0, v = 0; i < entries; i++, v += 0x00FFFFFF / (entries - 1)) { \ ((unsigned *)palette)[i] = v; \ } /** Create a reverse greyscale palette */ #define CREATE_GREYSCALE_PALETTE_REVERSE(palette, entries) \ for (unsigned i = 0, v = 0x00FFFFFF; i < entries; i++, v -= (0x00FFFFFF / (entries - 1))) { \ ((unsigned *)palette)[i] = v; \ } // ========================================================== // Generic error messages // ========================================================== static const char *FI_MSG_ERROR_MEMORY = "Memory allocation failed"; static const char *FI_MSG_ERROR_DIB_MEMORY = "DIB allocation failed, maybe caused by an invalid image size or by a lack of memory"; static const char *FI_MSG_ERROR_PARSING = "Parsing error"; static const char *FI_MSG_ERROR_MAGIC_NUMBER = "Invalid magic number"; static const char *FI_MSG_ERROR_UNSUPPORTED_FORMAT = "Unsupported format"; static const char *FI_MSG_ERROR_UNSUPPORTED_COMPRESSION = "Unsupported compression type"; static const char *FI_MSG_WARNING_INVALID_THUMBNAIL = "Warning: attached thumbnail cannot be written to output file (invalid format) - Thumbnail saving aborted"; #endif // FREEIMAGE_UTILITIES_H