# GC9A01
Rust implementation SPI 4-wire driver for the Gc9a01 display driver with a generic interface for display drivers and embedded-hal v1.0.0 support. ## GC9A01 Display Driver This crate provides a driver interface to the GC9A01 LCD display driver. It supports SPI via the [`display_interface`](https://docs.rs/display_interface) crate. The main driver is created using [`Gc9a01::new`] which accepts an interface instance, display, size, rotation and mode. The following display modes are supported: - [`BasicMode`] - A simple mode with lower level methods available. - [`BufferedGraphics`] - A framebuffered mode with additional methods and integration with [embedded-graphics](https://docs.rs/embedded-graphics). ### Support - [Embedded-graphics 2D graphics library](https://github.com/embedded-graphics/embedded-graphics) - [Generic Interface for Display Drivers](https://github.com/therealprof/display-interface) - [Embedded-hal v1.0.0](https://github.com/rust-embedded/embedded-hal/tree/embedded-hal-v1.0.0) ### Example - [Waveshare esp32-s3-touch-lcd-1-28](https://github.com/IniterWorker/esp32-s3-touch-lcd-1-28) ### Hardware - [1.28 inch TFT LCD Display Module Round RGB 240*240 GC9A01 Driver 4 Wire SPI](https://www.aliexpress.com/item/1005001382069930.html) ## Inspiration - From [jamwaffles/ssd1306](https://github.com/jamwaffles/ssd1306) ## License Licensed under either of - Apache License, Version 2.0 ([LICENSE-APACHE](LICENSE-APACHE) or http://www.apache.org/licenses/LICENSE-2.0) - MIT license ([LICENSE-MIT](LICENSE-MIT) or http://opensource.org/licenses/MIT) at your option. ### Contribution Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.