// Copyright 2019 Google LLC.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//

syntax = "proto3";

package google.cloud.tasks.v2beta3;

import "google/api/annotations.proto";

option go_package = "google.golang.org/genproto/googleapis/cloud/tasks/v2beta3;tasks";
option java_multiple_files = true;
option java_outer_classname = "TargetProto";
option java_package = "com.google.cloud.tasks.v2beta3";

// HTTP request.
//
// The task will be pushed to the worker as an HTTP request. If the worker
// or the redirected worker acknowledges the task by returning a successful HTTP
// response code ([`200` - `299`]), the task will be removed from the queue. If
// any other HTTP response code is returned or no response is received, the
// task will be retried according to the following:
//
// * User-specified throttling: [retry configuration][google.cloud.tasks.v2beta3.Queue.retry_config],
//   [rate limits][google.cloud.tasks.v2beta3.Queue.rate_limits], and the [queue's state][google.cloud.tasks.v2beta3.Queue.state].
//
// * System throttling: To prevent the worker from overloading, Cloud Tasks may
//   temporarily reduce the queue's effective rate. User-specified settings
//   will not be changed.
//
//  System throttling happens because:
//
//   * Cloud Tasks backs off on all errors. Normally the backoff specified in
//     [rate limits][google.cloud.tasks.v2beta3.Queue.rate_limits] will be used. But if the worker returns
//     `429` (Too Many Requests), `503` (Service Unavailable), or the rate of
//     errors is high, Cloud Tasks will use a higher backoff rate. The retry
//     specified in the `Retry-After` HTTP response header is considered.
//
//   * To prevent traffic spikes and to smooth sudden increases in traffic,
//     dispatches ramp up slowly when the queue is newly created or idle and
//     if large numbers of tasks suddenly become available to dispatch (due to
//     spikes in create task rates, the queue being unpaused, or many tasks
//     that are scheduled at the same time).
message HttpRequest {
  // Required. The full url path that the request will be sent to.
  //
  // This string must begin with either "http://" or "https://". Some examples
  // are: `http://acme.com` and `https://acme.com/sales:8080`. Cloud Tasks will
  // encode some characters for safety and compatibility. The maximum allowed
  // URL length is 2083 characters after encoding.
  //
  // The `Location` header response from a redirect response [`300` - `399`]
  // may be followed. The redirect is not counted as a separate attempt.
  string url = 1;

  // The HTTP method to use for the request. The default is POST.
  HttpMethod http_method = 2;

  // HTTP request headers.
  //
  // This map contains the header field names and values.
  // Headers can be set when the
  // [task is created][google.cloud.tasks.v2beta3.CloudTasks.CreateTask].
  //
  // These headers represent a subset of the headers that will accompany the
  // task's HTTP request. Some HTTP request headers will be ignored or replaced.
  //
  // A partial list of headers that will be ignored or replaced is:
  //
  // * Host: This will be computed by Cloud Tasks and derived from
  //   [HttpRequest.url][google.cloud.tasks.v2beta3.HttpRequest.url].
  // * Content-Length: This will be computed by Cloud Tasks.
  // * User-Agent: This will be set to `"Google-Cloud-Tasks"`.
  // * X-Google-*: Google use only.
  // * X-AppEngine-*: Google use only.
  //
  // `Content-Type` won't be set by Cloud Tasks. You can explicitly set
  // `Content-Type` to a media type when the
  //  [task is created][google.cloud.tasks.v2beta3.CloudTasks.CreateTask].
  //  For example, `Content-Type` can be set to `"application/octet-stream"` or
  //  `"application/json"`.
  //
  // Headers which can have multiple values (according to RFC2616) can be
  // specified using comma-separated values.
  //
  // The size of the headers must be less than 80KB.
  map<string, string> headers = 3;

  // HTTP request body.
  //
  // A request body is allowed only if the
  // [HTTP method][google.cloud.tasks.v2beta3.HttpRequest.http_method] is POST, PUT, or PATCH. It is an
  // error to set body on a task with an incompatible [HttpMethod][google.cloud.tasks.v2beta3.HttpMethod].
  bytes body = 4;

  // The mode for generating an `Authorization` header for HTTP requests.
  //
  // If specified, all `Authorization` headers in the [HttpRequest.headers][google.cloud.tasks.v2beta3.HttpRequest.headers]
  // field will be overridden.
  oneof authorization_header {
    // If specified, an
    // [OAuth token](https://developers.google.com/identity/protocols/OAuth2)
    // will be generated and attached as an `Authorization` header in the HTTP
    // request.
    //
    // This type of authorization should generally only be used when calling
    // Google APIs hosted on *.googleapis.com.
    OAuthToken oauth_token = 5;

    // If specified, an
    // [OIDC](https://developers.google.com/identity/protocols/OpenIDConnect)
    // token will be generated and attached as an `Authorization` header in the
    // HTTP request.
    //
    // This type of authorization can be used for many scenarios, including
    // calling Cloud Run, or endpoints where you intend to validate the token
    // yourself.
    OidcToken oidc_token = 6;
  }
}

// App Engine HTTP queue.
//
// The task will be delivered to the App Engine application hostname
// specified by its [AppEngineHttpQueue][google.cloud.tasks.v2beta3.AppEngineHttpQueue] and [AppEngineHttpRequest][google.cloud.tasks.v2beta3.AppEngineHttpRequest].
// The documentation for [AppEngineHttpRequest][google.cloud.tasks.v2beta3.AppEngineHttpRequest] explains how the
// task's host URL is constructed.
//
// Using [AppEngineHttpQueue][google.cloud.tasks.v2beta3.AppEngineHttpQueue] requires
// [`appengine.applications.get`](https://cloud.google.com/appengine/docs/admin-api/access-control)
// Google IAM permission for the project
// and the following scope:
//
// `https://www.googleapis.com/auth/cloud-platform`
message AppEngineHttpQueue {
  // Overrides for the
  // [task-level app_engine_routing][google.cloud.tasks.v2beta3.AppEngineHttpRequest.app_engine_routing].
  //
  // If set, `app_engine_routing_override` is used for all tasks in
  // the queue, no matter what the setting is for the
  // [task-level app_engine_routing][google.cloud.tasks.v2beta3.AppEngineHttpRequest.app_engine_routing].
  AppEngineRouting app_engine_routing_override = 1;
}

// App Engine HTTP request.
//
// The message defines the HTTP request that is sent to an App Engine app when
// the task is dispatched.
//
// Using [AppEngineHttpRequest][google.cloud.tasks.v2beta3.AppEngineHttpRequest] requires
// [`appengine.applications.get`](https://cloud.google.com/appengine/docs/admin-api/access-control)
// Google IAM permission for the project
// and the following scope:
//
// `https://www.googleapis.com/auth/cloud-platform`
//
// The task will be delivered to the App Engine app which belongs to the same
// project as the queue. For more information, see
// [How Requests are
// Routed](https://cloud.google.com/appengine/docs/standard/python/how-requests-are-routed)
// and how routing is affected by
// [dispatch
// files](https://cloud.google.com/appengine/docs/python/config/dispatchref).
// Traffic is encrypted during transport and never leaves Google datacenters.
// Because this traffic is carried over a communication mechanism internal to
// Google, you cannot explicitly set the protocol (for example, HTTP or HTTPS).
// The request to the handler, however, will appear to have used the HTTP
// protocol.
//
// The [AppEngineRouting][google.cloud.tasks.v2beta3.AppEngineRouting] used to construct the URL that the task is
// delivered to can be set at the queue-level or task-level:
//
// * If set,
//    [app_engine_routing_override][google.cloud.tasks.v2beta3.AppEngineHttpQueue.app_engine_routing_override]
//    is used for all tasks in the queue, no matter what the setting
//    is for the
//    [task-level app_engine_routing][google.cloud.tasks.v2beta3.AppEngineHttpRequest.app_engine_routing].
//
//
// The `url` that the task will be sent to is:
//
// * `url =` [host][google.cloud.tasks.v2beta3.AppEngineRouting.host] `+`
//   [relative_uri][google.cloud.tasks.v2beta3.AppEngineHttpRequest.relative_uri]
//
// Tasks can be dispatched to secure app handlers, unsecure app handlers, and
// URIs restricted with
// [`login:
// admin`](https://cloud.google.com/appengine/docs/standard/python/config/appref).
// Because tasks are not run as any user, they cannot be dispatched to URIs
// restricted with
// [`login:
// required`](https://cloud.google.com/appengine/docs/standard/python/config/appref)
// Task dispatches also do not follow redirects.
//
// The task attempt has succeeded if the app's request handler returns an HTTP
// response code in the range [`200` - `299`]. The task attempt has failed if
// the app's handler returns a non-2xx response code or Cloud Tasks does
// not receive response before the [deadline][google.cloud.tasks.v2beta3.Task.dispatch_deadline]. Failed
// tasks will be retried according to the
// [retry configuration][google.cloud.tasks.v2beta3.Queue.retry_config]. `503` (Service Unavailable) is
// considered an App Engine system error instead of an application error and
// will cause Cloud Tasks' traffic congestion control to temporarily throttle
// the queue's dispatches. Unlike other types of task targets, a `429` (Too Many
// Requests) response from an app handler does not cause traffic congestion
// control to throttle the queue.
message AppEngineHttpRequest {
  // The HTTP method to use for the request. The default is POST.
  //
  // The app's request handler for the task's target URL must be able to handle
  // HTTP requests with this http_method, otherwise the task attempt will fail
  // with error code 405 (Method Not Allowed). See
  // [Writing a push task request
  // handler](https://cloud.google.com/appengine/docs/java/taskqueue/push/creating-handlers#writing_a_push_task_request_handler)
  // and the documentation for the request handlers in the language your app is
  // written in e.g.
  // [Python Request
  // Handler](https://cloud.google.com/appengine/docs/python/tools/webapp/requesthandlerclass).
  HttpMethod http_method = 1;

  // Task-level setting for App Engine routing.
  //
  // If set,
  // [app_engine_routing_override][google.cloud.tasks.v2beta3.AppEngineHttpQueue.app_engine_routing_override]
  // is used for all tasks in the queue, no matter what the setting is for the
  // [task-level app_engine_routing][google.cloud.tasks.v2beta3.AppEngineHttpRequest.app_engine_routing].
  AppEngineRouting app_engine_routing = 2;

  // The relative URI.
  //
  // The relative URI must begin with "/" and must be a valid HTTP relative URI.
  // It can contain a path and query string arguments.
  // If the relative URI is empty, then the root path "/" will be used.
  // No spaces are allowed, and the maximum length allowed is 2083 characters.
  string relative_uri = 3;

  // HTTP request headers.
  //
  // This map contains the header field names and values.
  // Headers can be set when the
  // [task is created][google.cloud.tasks.v2beta3.CloudTasks.CreateTask].
  // Repeated headers are not supported but a header value can contain commas.
  //
  // Cloud Tasks sets some headers to default values:
  //
  // * `User-Agent`: By default, this header is
  //   `"AppEngine-Google; (+http://code.google.com/appengine)"`.
  //   This header can be modified, but Cloud Tasks will append
  //   `"AppEngine-Google; (+http://code.google.com/appengine)"` to the
  //   modified `User-Agent`.
  //
  // If the task has a [body][google.cloud.tasks.v2beta3.AppEngineHttpRequest.body], Cloud
  // Tasks sets the following headers:
  //
  // * `Content-Type`: By default, the `Content-Type` header is set to
  //   `"application/octet-stream"`. The default can be overridden by explicitly
  //   setting `Content-Type` to a particular media type when the
  //   [task is created][google.cloud.tasks.v2beta3.CloudTasks.CreateTask].
  //   For example, `Content-Type` can be set to `"application/json"`.
  // * `Content-Length`: This is computed by Cloud Tasks. This value is
  //   output only.   It cannot be changed.
  //
  // The headers below cannot be set or overridden:
  //
  // * `Host`
  // * `X-Google-*`
  // * `X-AppEngine-*`
  //
  // In addition, Cloud Tasks sets some headers when the task is dispatched,
  // such as headers containing information about the task; see
  // [request
  // headers](https://cloud.google.com/tasks/docs/creating-appengine-handlers#reading_request_headers).
  // These headers are set only when the task is dispatched, so they are not
  // visible when the task is returned in a Cloud Tasks response.
  //
  // Although there is no specific limit for the maximum number of headers or
  // the size, there is a limit on the maximum size of the [Task][google.cloud.tasks.v2beta3.Task]. For more
  // information, see the [CreateTask][google.cloud.tasks.v2beta3.CloudTasks.CreateTask] documentation.
  map<string, string> headers = 4;

  // HTTP request body.
  //
  // A request body is allowed only if the HTTP method is POST or PUT. It is
  // an error to set a body on a task with an incompatible [HttpMethod][google.cloud.tasks.v2beta3.HttpMethod].
  bytes body = 5;
}

// App Engine Routing.
//
// Defines routing characteristics specific to App Engine - service, version,
// and instance.
//
// For more information about services, versions, and instances see
// [An Overview of App
// Engine](https://cloud.google.com/appengine/docs/python/an-overview-of-app-engine),
// [Microservices Architecture on Google App
// Engine](https://cloud.google.com/appengine/docs/python/microservices-on-app-engine),
// [App Engine Standard request
// routing](https://cloud.google.com/appengine/docs/standard/python/how-requests-are-routed),
// and [App Engine Flex request
// routing](https://cloud.google.com/appengine/docs/flexible/python/how-requests-are-routed).
message AppEngineRouting {
  // App service.
  //
  // By default, the task is sent to the service which is the default
  // service when the task is attempted.
  //
  // For some queues or tasks which were created using the App Engine
  // Task Queue API, [host][google.cloud.tasks.v2beta3.AppEngineRouting.host] is not parsable
  // into [service][google.cloud.tasks.v2beta3.AppEngineRouting.service],
  // [version][google.cloud.tasks.v2beta3.AppEngineRouting.version], and
  // [instance][google.cloud.tasks.v2beta3.AppEngineRouting.instance]. For example, some tasks
  // which were created using the App Engine SDK use a custom domain
  // name; custom domains are not parsed by Cloud Tasks. If
  // [host][google.cloud.tasks.v2beta3.AppEngineRouting.host] is not parsable, then
  // [service][google.cloud.tasks.v2beta3.AppEngineRouting.service],
  // [version][google.cloud.tasks.v2beta3.AppEngineRouting.version], and
  // [instance][google.cloud.tasks.v2beta3.AppEngineRouting.instance] are the empty string.
  string service = 1;

  // App version.
  //
  // By default, the task is sent to the version which is the default
  // version when the task is attempted.
  //
  // For some queues or tasks which were created using the App Engine
  // Task Queue API, [host][google.cloud.tasks.v2beta3.AppEngineRouting.host] is not parsable
  // into [service][google.cloud.tasks.v2beta3.AppEngineRouting.service],
  // [version][google.cloud.tasks.v2beta3.AppEngineRouting.version], and
  // [instance][google.cloud.tasks.v2beta3.AppEngineRouting.instance]. For example, some tasks
  // which were created using the App Engine SDK use a custom domain
  // name; custom domains are not parsed by Cloud Tasks. If
  // [host][google.cloud.tasks.v2beta3.AppEngineRouting.host] is not parsable, then
  // [service][google.cloud.tasks.v2beta3.AppEngineRouting.service],
  // [version][google.cloud.tasks.v2beta3.AppEngineRouting.version], and
  // [instance][google.cloud.tasks.v2beta3.AppEngineRouting.instance] are the empty string.
  string version = 2;

  // App instance.
  //
  // By default, the task is sent to an instance which is available when
  // the task is attempted.
  //
  // Requests can only be sent to a specific instance if
  // [manual scaling is used in App Engine
  // Standard](https://cloud.google.com/appengine/docs/python/an-overview-of-app-engine?hl=en_US#scaling_types_and_instance_classes).
  // App Engine Flex does not support instances. For more information, see
  // [App Engine Standard request
  // routing](https://cloud.google.com/appengine/docs/standard/python/how-requests-are-routed)
  // and [App Engine Flex request
  // routing](https://cloud.google.com/appengine/docs/flexible/python/how-requests-are-routed).
  string instance = 3;

  // Output only. The host that the task is sent to.
  //
  // The host is constructed from the domain name of the app associated with
  // the queue's project ID (for example <app-id>.appspot.com), and the
  // [service][google.cloud.tasks.v2beta3.AppEngineRouting.service], [version][google.cloud.tasks.v2beta3.AppEngineRouting.version],
  // and [instance][google.cloud.tasks.v2beta3.AppEngineRouting.instance]. Tasks which were created using
  // the App Engine SDK might have a custom domain name.
  //
  // For more information, see
  // [How Requests are
  // Routed](https://cloud.google.com/appengine/docs/standard/python/how-requests-are-routed).
  string host = 4;
}

// The HTTP method used to execute the task.
enum HttpMethod {
  // HTTP method unspecified
  HTTP_METHOD_UNSPECIFIED = 0;

  // HTTP POST
  POST = 1;

  // HTTP GET
  GET = 2;

  // HTTP HEAD
  HEAD = 3;

  // HTTP PUT
  PUT = 4;

  // HTTP DELETE
  DELETE = 5;

  // HTTP PATCH
  PATCH = 6;

  // HTTP OPTIONS
  OPTIONS = 7;
}

// Contains information needed for generating an
// [OAuth token](https://developers.google.com/identity/protocols/OAuth2).
// This type of authorization should generally only be used when calling Google
// APIs hosted on *.googleapis.com.
message OAuthToken {
  // [Service account email](https://cloud.google.com/iam/docs/service-accounts)
  // to be used for generating OAuth token.
  // The service account must be within the same project as the queue. The
  // caller must have iam.serviceAccounts.actAs permission for the service
  // account.
  string service_account_email = 1;

  // OAuth scope to be used for generating OAuth access token.
  // If not specified, "https://www.googleapis.com/auth/cloud-platform"
  // will be used.
  string scope = 2;
}

// Contains information needed for generating an
// [OpenID Connect
// token](https://developers.google.com/identity/protocols/OpenIDConnect).
// This type of authorization can be used for many scenarios, including
// calling Cloud Run, or endpoints where you intend to validate the token
// yourself.
message OidcToken {
  // [Service account email](https://cloud.google.com/iam/docs/service-accounts)
  // to be used for generating OIDC token.
  // The service account must be within the same project as the queue. The
  // caller must have iam.serviceAccounts.actAs permission for the service
  // account.
  string service_account_email = 1;

  // Audience to be used when generating OIDC token. If not specified, the URI
  // specified in target will be used.
  string audience = 2;
}