//
// Copyright 2016 Google Inc. All Rights Reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//    http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//
syntax = "proto3";

import "google/protobuf/any.proto";
import "google/protobuf/descriptor.proto";
import "gnmi_ext/gnmi_ext.proto";

// Package gNMI defines a service specification for the gRPC Network Management
// Interface. This interface is defined to be a standard interface via which
// a network management system ("client") can subscribe to state values,
// retrieve snapshots of state information, and manipulate the state of a data
// tree supported by a device ("target").
//
// This document references the gNMI Specification which can be found at
// http://github.com/openconfig/reference/blob/master/rpc/gnmi
package gnmi;

// Define a protobuf FileOption that defines the gNMI service version.
extend google.protobuf.FileOptions {
  // The gNMI service semantic version.
  string gnmi_service = 1001;
}

// gNMI_service is the current version of the gNMI service, returned through
// the Capabilities RPC.
option (gnmi_service) = "0.10.0";

option go_package = "github.com/openconfig/gnmi/proto/gnmi";
option java_multiple_files = true;
option java_outer_classname = "GnmiProto";
option java_package = "com.github.gnmi.proto";


service gNMI {
  // Capabilities allows the client to retrieve the set of capabilities that
  // is supported by the target. This allows the target to validate the
  // service version that is implemented and retrieve the set of models that
  // the target supports. The models can then be specified in subsequent RPCs
  // to restrict the set of data that is utilized.
  // Reference: gNMI Specification Section 3.2
  rpc Capabilities(CapabilityRequest) returns (CapabilityResponse);
  // Retrieve a snapshot of data from the target. A Get RPC requests that the
  // target snapshots a subset of the data tree as specified by the paths
  // included in the message and serializes this to be returned to the
  // client using the specified encoding.
  // Reference: gNMI Specification Section 3.3
  rpc Get(GetRequest) returns (GetResponse);
  // Set allows the client to modify the state of data on the target. The
  // paths to modified along with the new values that the client wishes
  // to set the value to.
  // Reference: gNMI Specification Section 3.4
  rpc Set(SetRequest) returns (SetResponse);
  // Subscribe allows a client to request the target to send it values
  // of particular paths within the data tree. These values may be streamed
  // at a particular cadence (STREAM), sent one off on a long-lived channel
  // (POLL), or sent as a one-off retrieval (ONCE).
  // Reference: gNMI Specification Section 3.5
  rpc Subscribe(stream SubscribeRequest) returns (stream SubscribeResponse);
}

// Notification is a re-usable message that is used to encode data from the
// target to the client. A Notification carries two types of changes to the data
// tree:
//  - Deleted values (delete) - a set of paths that have been removed from the
//    data tree.
//  - Updated values (update) - a set of path-value pairs indicating the path
//    whose value has changed in the data tree.
// Reference: gNMI Specification Section 2.1
message Notification {
  int64 timestamp = 1;         // Timestamp in nanoseconds since Epoch.
  Path prefix = 2;             // Prefix used for paths in the message.
  repeated Update update = 4;  // Data elements that have changed values.
  repeated Path delete = 5;    // Data elements that have been deleted.
  // This notification contains a set of paths that are always updated together
  // referenced by a globally unique prefix.
  bool atomic = 6;
  // Reserved field numbers and identifiers.
  reserved "alias";
  reserved 3;
}

// Update is a re-usable message that is used to store a particular Path,
// Value pair.
// Reference: gNMI Specification Section 2.1
message Update {
  Path path = 1;                        // The path (key) for the update.
  Value value = 2 [deprecated = true];  // The value (value) for the update.
  TypedValue val = 3;                   // The explicitly typed update value.
  uint32 duplicates = 4;                // Number of coalesced duplicates.
}

// TypedValue is used to encode a value being sent between the client and
// target (originated by either entity).
message TypedValue {
  // One of the fields within the val oneof is populated with the value
  // of the update. The type of the value being included in the Update
  // determines which field should be populated. In the case that the
  // encoding is a particular form of the base protobuf type, a specific
  // field is used to store the value (e.g., json_val).
  oneof value {
    string string_val = 1;                    // String value.
    int64 int_val = 2;                        // Integer value.
    uint64 uint_val = 3;                      // Unsigned integer value.
    bool bool_val = 4;                        // Bool value.
    bytes bytes_val = 5;                      // Arbitrary byte sequence value.
    float float_val = 6 [deprecated = true];  // Deprecated - use double_val.
    double double_val = 14;                   // Floating point value.
    Decimal64 decimal_val = 7
    [deprecated = true];          // Deprecated - use double_val.
    ScalarArray leaflist_val = 8;     // Mixed type scalar array value.
    google.protobuf.Any any_val = 9;  // protobuf.Any encoded bytes.
    bytes json_val = 10;              // JSON-encoded text.
    bytes json_ietf_val = 11;         // JSON-encoded text per RFC7951.
    string ascii_val = 12;            // Arbitrary ASCII text.
    // Protobuf binary encoded bytes. The message type is not included.
    // See the specification at
    // github.com/openconfig/reference/blob/master/rpc/gnmi/protobuf-vals.md
    // for a complete specification. [Experimental]
    bytes proto_bytes = 13;
  }
}

// Path encodes a data tree path as a series of repeated strings, with
// each element of the path representing a data tree node name and the
// associated attributes.
// Reference: gNMI Specification Section 2.2.2.
message Path {
  // Elements of the path are no longer encoded as a string, but rather within
  // the elem field as a PathElem message.
  repeated string element = 1 [deprecated = true];
  string origin = 2;           // Label to disambiguate path.
  repeated PathElem elem = 3;  // Elements of the path.
  string target = 4;           // The name of the target
  // (Sec. 2.2.2.1)
}

// PathElem encodes an element of a gNMI path, along with any attributes (keys)
// that may be associated with it.
// Reference: gNMI Specification Section 2.2.2.
message PathElem {
  string name = 1;              // The name of the element in the path.
  map<string, string> key = 2;  // Map of key (attribute) name to value.
}

// Value encodes a data tree node's value - along with the way in which
// the value is encoded. This message is deprecated by gNMI 0.3.0.
// Reference: gNMI Specification Section 2.2.3.
message Value {
  option deprecated = true;

  bytes value = 1;    // Value of the variable being transmitted.
  Encoding type = 2;  // Encoding used for the value field.
}

// Encoding defines the value encoding formats that are supported by the gNMI
// protocol. These encodings are used by both the client (when sending Set
// messages to modify the state of the target) and the target when serializing
// data to be returned to the client (in both Subscribe and Get RPCs).
// Reference: gNMI Specification Section 2.3
enum Encoding {
  JSON = 0;       // JSON encoded text.
  BYTES = 1;      // Arbitrarily encoded bytes.
  PROTO = 2;      // Encoded according to scalar values of TypedValue.
  ASCII = 3;      // ASCII text of an out-of-band agreed format.
  JSON_IETF = 4;  // JSON encoded text as per RFC7951.
}

// Error message previously utilised to return errors to the client. Deprecated
// in favour of using the google.golang.org/genproto/googleapis/rpc/status
// message in the RPC response.
// Reference: gNMI Specification Section 2.5
message Error {
  option deprecated = true;

  uint32 code = 1;               // Canonical gRPC error code.
  string message = 2;            // Human readable error.
  google.protobuf.Any data = 3;  // Optional additional information.
}

// Decimal64 is used to encode a fixed precision decimal number. The value
// is expressed as a set of digits with the precision specifying the
// number of digits following the decimal point in the digit set.
// This message is deprecated in favor of encoding all floating point types
// as double precision.
message Decimal64 {
  option deprecated = true;

  int64 digits = 1;      // Set of digits.
  uint32 precision = 2;  // Number of digits following the decimal point.
}

// ScalarArray is used to encode a mixed-type array of values.
message ScalarArray {
  // The set of elements within the array. Each TypedValue message should
  // specify only elements that have a field identifier of 1-7 (i.e., the
  // values are scalar values).
  repeated TypedValue element = 1;
}

// SubscribeRequest is the message sent by the client to the target when
// initiating a subscription to a set of paths within the data tree. The
// request field must be populated and the initial message must specify a
// SubscriptionList to initiate a subscription.
// Reference: gNMI Specification Section 3.5.1.1
message SubscribeRequest {
  oneof request {
    SubscriptionList subscribe = 1;  // Specify the paths within a subscription.
    Poll poll = 3;                   // Trigger a polled update.
  }
  // Extension messages associated with the SubscribeRequest. See the
  // gNMI extension specification for further definition.
  repeated gnmi_ext.Extension extension = 5;
  // Reserved field numbers and identifiers.
  reserved 4;
  reserved "aliases";
}

// Poll is sent within a SubscribeRequest to trigger the device to
// send telemetry updates for the paths that are associated with the
// subscription.
// Reference: gNMI Specification Section Section 3.5.1.4
message Poll {}

// SubscribeResponse is the message used by the target within a Subscribe RPC.
// The target includes a Notification message which is used to transmit values
// of the path(s) that are associated with the subscription. The same message
// is to indicate that the target has sent all data values once (is
// synchronized).
// Reference: gNMI Specification Section 3.5.1.4
message SubscribeResponse {
  oneof response {
    Notification update = 1;  // Changed or sampled value for a path.
    // Indicate target has sent all values associated with the subscription
    // at least once.
    bool sync_response = 3;
    // Deprecated in favour of google.golang.org/genproto/googleapis/rpc/status
    Error error = 4 [deprecated = true];
  }
  // Extension messages associated with the SubscribeResponse. See the
  // gNMI extension specification for further definition.
  repeated gnmi_ext.Extension extension = 5;
}

// SubscriptionList is used within a Subscribe message to specify the list of
// paths that the client wishes to subscribe to. The message consists of a
// list of (possibly prefixed) paths, and options that relate to the
// subscription.
// Reference: gNMI Specification Section 3.5.1.2
message SubscriptionList {
  Path prefix = 1;                         // Prefix used for paths.
  repeated Subscription subscription = 2;  // Set of subscriptions to create.
  QOSMarking qos = 4;                      // DSCP marking to be used.
  // Mode of the subscription.
  enum Mode {
    STREAM = 0;  // Values streamed by the target (Sec. 3.5.1.5.2).
    ONCE = 1;    // Values sent once-off by the target (Sec. 3.5.1.5.1).
    POLL = 2;    // Values sent in response to a poll request (Sec. 3.5.1.5.3).
  }
  Mode mode = 5;
  // Whether elements of the schema that are marked as eligible for aggregation
  // should be aggregated or not.
  bool allow_aggregation = 6;
  // The set of schemas that define the elements of the data tree that should
  // be sent by the target.
  repeated ModelData use_models = 7;
  // The encoding that the target should use within the Notifications generated
  // corresponding to the SubscriptionList.
  Encoding encoding = 8;
  // An optional field to specify that only updates to current state should be
  // sent to a client. If set, the initial state is not sent to the client but
  // rather only the sync message followed by any subsequent updates to the
  // current state. For ONCE and POLL modes, this causes the server to send only
  // the sync message (Sec. 3.5.2.3).
  bool updates_only = 9;
  // Reserved field numbers and identifiers.
  reserved 3;
  reserved "use_aliases";
}

// Subscription is a single request within a SubscriptionList. The path
// specified is interpreted (along with the prefix) as the elements of the data
// tree that the client is subscribing to. The mode determines how the target
// should trigger updates to be sent.
// Reference: gNMI Specification Section 3.5.1.3
message Subscription {
  Path path = 1;               // The data tree path.
  SubscriptionMode mode = 2;   // Subscription mode to be used.
  uint64 sample_interval = 3;  // ns between samples in SAMPLE mode.
  // Indicates whether values that have not changed should be sent in a SAMPLE
  // subscription.
  bool suppress_redundant = 4;
  // Specifies the maximum allowable silent period in nanoseconds when
  // suppress_redundant is in use. The target should send a value at least once
  // in the period specified.
  uint64 heartbeat_interval = 5;
}

// SubscriptionMode is the mode of the subscription, specifying how the
// target must return values in a subscription.
// Reference: gNMI Specification Section 3.5.1.3
enum SubscriptionMode {
  TARGET_DEFINED = 0;  // The target selects the relevant mode for each element.
  ON_CHANGE = 1;       // The target sends an update on element value change.
  SAMPLE = 2;          // The target samples values according to the interval.
}

// QOSMarking specifies the DSCP value to be set on transmitted telemetry
// updates from the target.
// Reference: gNMI Specification Section 3.5.1.2
message QOSMarking {
  uint32 marking = 1;
}

// SetRequest is sent from a client to the target to update values in the data
// tree. Paths are either deleted by the client, or modified by means of being
// updated, or replaced. Where a replace is used, unspecified values are
// considered to be replaced, whereas when update is used the changes are
// considered to be incremental. The set of changes that are specified within
// a single SetRequest are considered to be a transaction.
// Reference: gNMI Specification Section 3.4.1
message SetRequest {
  Path prefix = 1;              // Prefix used for paths in the message.
  repeated Path delete = 2;     // Paths to be deleted from the data tree.
  repeated Update replace = 3;  // Updates specifying elements to be replaced.
  repeated Update update = 4;   // Updates specifying elements to updated.
  // Updates specifying elements to union and then replace the data tree.
  // See the gNMI specification at
  // https://github.com/openconfig/reference/blob/master/rpc/gnmi/gnmi-specification.md
  // for details.
  repeated Update union_replace = 6;
  // Extension messages associated with the SetRequest. See the
  // gNMI extension specification for further definition.
  repeated gnmi_ext.Extension extension = 5;
}

// SetResponse is the response to a SetRequest, sent from the target to the
// client. It reports the result of the modifications to the data tree that were
// specified by the client. Errors for this RPC should be reported using the
// https://github.com/googleapis/googleapis/blob/master/google/rpc/status.proto
// message in the RPC return. The gnmi.Error message can be used to add
// additional details where required. Reference: gNMI Specification
// Section 3.4.2
message SetResponse {
  Path prefix = 1;  // Prefix used for paths.
  // A set of responses specifying the result of the operations specified in
  // the SetRequest.
  repeated UpdateResult response = 2;
  Error message = 3
  [deprecated = true];  // The overall status of the transaction.
  int64 timestamp = 4;      // Timestamp of transaction (ns since epoch).
  // Extension messages associated with the SetResponse. See the
  // gNMI extension specification for further definition.
  repeated gnmi_ext.Extension extension = 5;
}

// UpdateResult is used within the SetResponse message to communicate the
// result of an operation specified within a SetRequest message.
// Reference: gNMI Specification Section 3.4.2
message UpdateResult {
  // The operation that was associated with the Path specified.
  enum Operation {
    INVALID = 0;
    DELETE = 1;         // The result relates to a delete of Path.
    REPLACE = 2;        // The result relates to a replace of Path.
    UPDATE = 3;         // The result relates to an update of Path.
    UNION_REPLACE = 4;  // The result of a union_replace of Path or CLI origin.
  }
  // Deprecated timestamp for the UpdateResult, this field has been
  // replaced by the timestamp within the SetResponse message, since
  // all mutations effected by a set should be applied as a single
  // transaction.
  int64 timestamp = 1 [deprecated = true];
  Path path = 2;                          // Path associated with the update.
  Error message = 3 [deprecated = true];  // Status of the update operation.
  Operation op = 4;                       // Update operation type.
}

// GetRequest is sent when a client initiates a Get RPC. It is used to specify
// the set of data elements for which the target should return a snapshot of
// data. The use_models field specifies the set of schema modules that are to
// be used by the target - where use_models is not specified then the target
// must use all schema models that it has.
// Reference: gNMI Specification Section 3.3.1
message GetRequest {
  Path prefix = 1;         // Prefix used for paths.
  repeated Path path = 2;  // Paths requested by the client.
  // Type of elements within the data tree.
  enum DataType {
    ALL = 0;     // All data elements.
    CONFIG = 1;  // Config (rw) only elements.
    STATE = 2;   // State (ro) only elements.
    // Data elements marked in the schema as operational. This refers to data
    // elements whose value relates to the state of processes or interactions
    // running on the device.
    OPERATIONAL = 3;
  }
  DataType type = 3;                  // The type of data being requested.
  Encoding encoding = 5;              // Encoding to be used.
  repeated ModelData use_models = 6;  // The schema models to be used.
  // Extension messages associated with the GetRequest. See the
  // gNMI extension specification for further definition.
  repeated gnmi_ext.Extension extension = 7;
}

// GetResponse is used by the target to respond to a GetRequest from a client.
// The set of Notifications corresponds to the data values that are requested
// by the client in the GetRequest.
// Reference: gNMI Specification Section 3.3.2
message GetResponse {
  repeated Notification notification = 1;  // Data values.
  Error error = 2 [deprecated = true];     // Errors that occurred in the Get.
  // Extension messages associated with the GetResponse. See the
  // gNMI extension specification for further definition.
  repeated gnmi_ext.Extension extension = 3;
}

// CapabilityRequest is sent by the client in the Capabilities RPC to request
// that the target reports its capabilities.
// Reference: gNMI Specification Section 3.2.1
message CapabilityRequest {
  // Extension messages associated with the CapabilityRequest. See the
  // gNMI extension specification for further definition.
  repeated gnmi_ext.Extension extension = 1;
}

// CapabilityResponse is used by the target to report its capabilities to the
// client within the Capabilities RPC.
// Reference: gNMI Specification Section 3.2.2
message CapabilityResponse {
  repeated ModelData supported_models = 1;    // Supported schema models.
  repeated Encoding supported_encodings = 2;  // Supported encodings.
  string gNMI_version = 3;                    // Supported gNMI version.
  // Extension messages associated with the CapabilityResponse. See the
  // gNMI extension specification for further definition.
  repeated gnmi_ext.Extension extension = 4;
}

// ModelData is used to describe a set of schema modules. It can be used in a
// CapabilityResponse where a target reports the set of modules that it
// supports, and within the SubscribeRequest and GetRequest messages to specify
// the set of models from which data tree elements should be reported.
// Reference: gNMI Specification Section 3.2.3
message ModelData {
  string name = 1;          // Name of the model.
  string organization = 2;  // Organization publishing the model.
  string version = 3;       // Semantic version of the model.
}