/// Specifies the complete (requested) contents of a single row of a table. /// Rows which exceed 256MiB in size cannot be read in full. #[derive(Clone, PartialEq, ::prost::Message)] pub struct Row { /// The unique key which identifies this row within its table. This is the same /// key that's used to identify the row in, for example, a MutateRowRequest. /// May contain any non-empty byte string up to 4KiB in length. #[prost(bytes = "vec", tag = "1")] pub key: ::prost::alloc::vec::Vec, /// May be empty, but only if the entire row is empty. /// The mutual ordering of column families is not specified. #[prost(message, repeated, tag = "2")] pub families: ::prost::alloc::vec::Vec, } /// Specifies (some of) the contents of a single row/column family intersection /// of a table. #[derive(Clone, PartialEq, ::prost::Message)] pub struct Family { /// The unique key which identifies this family within its row. This is the /// same key that's used to identify the family in, for example, a RowFilter /// which sets its "family_name_regex_filter" field. /// Must match `\[-_.a-zA-Z0-9\]+`, except that AggregatingRowProcessors may /// produce cells in a sentinel family with an empty name. /// Must be no greater than 64 characters in length. #[prost(string, tag = "1")] pub name: ::prost::alloc::string::String, /// Must not be empty. Sorted in order of increasing "qualifier". #[prost(message, repeated, tag = "2")] pub columns: ::prost::alloc::vec::Vec, } /// Specifies (some of) the contents of a single row/column intersection of a /// table. #[derive(Clone, PartialEq, ::prost::Message)] pub struct Column { /// The unique key which identifies this column within its family. This is the /// same key that's used to identify the column in, for example, a RowFilter /// which sets its `column_qualifier_regex_filter` field. /// May contain any byte string, including the empty string, up to 16kiB in /// length. #[prost(bytes = "vec", tag = "1")] pub qualifier: ::prost::alloc::vec::Vec, /// Must not be empty. Sorted in order of decreasing "timestamp_micros". #[prost(message, repeated, tag = "2")] pub cells: ::prost::alloc::vec::Vec, } /// Specifies (some of) the contents of a single row/column/timestamp of a table. #[derive(Clone, PartialEq, ::prost::Message)] pub struct Cell { /// The cell's stored timestamp, which also uniquely identifies it within /// its column. /// Values are always expressed in microseconds, but individual tables may set /// a coarser granularity to further restrict the allowed values. For /// example, a table which specifies millisecond granularity will only allow /// values of `timestamp_micros` which are multiples of 1000. #[prost(int64, tag = "1")] pub timestamp_micros: i64, /// The value stored in the cell. /// May contain any byte string, including the empty string, up to 100MiB in /// length. #[prost(bytes = "vec", tag = "2")] pub value: ::prost::alloc::vec::Vec, /// Labels applied to the cell by a \[RowFilter][google.bigtable.v2.RowFilter\]. #[prost(string, repeated, tag = "3")] pub labels: ::prost::alloc::vec::Vec<::prost::alloc::string::String>, } /// Specifies a contiguous range of rows. #[derive(Clone, PartialEq, ::prost::Message)] pub struct RowRange { /// The row key at which to start the range. /// If neither field is set, interpreted as the empty string, inclusive. #[prost(oneof = "row_range::StartKey", tags = "1, 2")] pub start_key: ::core::option::Option, /// The row key at which to end the range. /// If neither field is set, interpreted as the infinite row key, exclusive. #[prost(oneof = "row_range::EndKey", tags = "3, 4")] pub end_key: ::core::option::Option, } /// Nested message and enum types in `RowRange`. pub mod row_range { /// The row key at which to start the range. /// If neither field is set, interpreted as the empty string, inclusive. #[derive(Clone, PartialEq, ::prost::Oneof)] pub enum StartKey { /// Used when giving an inclusive lower bound for the range. #[prost(bytes, tag = "1")] StartKeyClosed(::prost::alloc::vec::Vec), /// Used when giving an exclusive lower bound for the range. #[prost(bytes, tag = "2")] StartKeyOpen(::prost::alloc::vec::Vec), } /// The row key at which to end the range. /// If neither field is set, interpreted as the infinite row key, exclusive. #[derive(Clone, PartialEq, ::prost::Oneof)] pub enum EndKey { /// Used when giving an exclusive upper bound for the range. #[prost(bytes, tag = "3")] EndKeyOpen(::prost::alloc::vec::Vec), /// Used when giving an inclusive upper bound for the range. #[prost(bytes, tag = "4")] EndKeyClosed(::prost::alloc::vec::Vec), } } /// Specifies a non-contiguous set of rows. #[derive(Clone, PartialEq, ::prost::Message)] pub struct RowSet { /// Single rows included in the set. #[prost(bytes = "vec", repeated, tag = "1")] pub row_keys: ::prost::alloc::vec::Vec<::prost::alloc::vec::Vec>, /// Contiguous row ranges included in the set. #[prost(message, repeated, tag = "2")] pub row_ranges: ::prost::alloc::vec::Vec, } /// Specifies a contiguous range of columns within a single column family. /// The range spans from <column_family>:<start_qualifier> to /// <column_family>:<end_qualifier>, where both bounds can be either /// inclusive or exclusive. #[derive(Clone, PartialEq, ::prost::Message)] pub struct ColumnRange { /// The name of the column family within which this range falls. #[prost(string, tag = "1")] pub family_name: ::prost::alloc::string::String, /// The column qualifier at which to start the range (within `column_family`). /// If neither field is set, interpreted as the empty string, inclusive. #[prost(oneof = "column_range::StartQualifier", tags = "2, 3")] pub start_qualifier: ::core::option::Option, /// The column qualifier at which to end the range (within `column_family`). /// If neither field is set, interpreted as the infinite string, exclusive. #[prost(oneof = "column_range::EndQualifier", tags = "4, 5")] pub end_qualifier: ::core::option::Option, } /// Nested message and enum types in `ColumnRange`. pub mod column_range { /// The column qualifier at which to start the range (within `column_family`). /// If neither field is set, interpreted as the empty string, inclusive. #[derive(Clone, PartialEq, ::prost::Oneof)] pub enum StartQualifier { /// Used when giving an inclusive lower bound for the range. #[prost(bytes, tag = "2")] StartQualifierClosed(::prost::alloc::vec::Vec), /// Used when giving an exclusive lower bound for the range. #[prost(bytes, tag = "3")] StartQualifierOpen(::prost::alloc::vec::Vec), } /// The column qualifier at which to end the range (within `column_family`). /// If neither field is set, interpreted as the infinite string, exclusive. #[derive(Clone, PartialEq, ::prost::Oneof)] pub enum EndQualifier { /// Used when giving an inclusive upper bound for the range. #[prost(bytes, tag = "4")] EndQualifierClosed(::prost::alloc::vec::Vec), /// Used when giving an exclusive upper bound for the range. #[prost(bytes, tag = "5")] EndQualifierOpen(::prost::alloc::vec::Vec), } } /// Specified a contiguous range of microsecond timestamps. #[derive(Clone, PartialEq, ::prost::Message)] pub struct TimestampRange { /// Inclusive lower bound. If left empty, interpreted as 0. #[prost(int64, tag = "1")] pub start_timestamp_micros: i64, /// Exclusive upper bound. If left empty, interpreted as infinity. #[prost(int64, tag = "2")] pub end_timestamp_micros: i64, } /// Specifies a contiguous range of raw byte values. #[derive(Clone, PartialEq, ::prost::Message)] pub struct ValueRange { /// The value at which to start the range. /// If neither field is set, interpreted as the empty string, inclusive. #[prost(oneof = "value_range::StartValue", tags = "1, 2")] pub start_value: ::core::option::Option, /// The value at which to end the range. /// If neither field is set, interpreted as the infinite string, exclusive. #[prost(oneof = "value_range::EndValue", tags = "3, 4")] pub end_value: ::core::option::Option, } /// Nested message and enum types in `ValueRange`. pub mod value_range { /// The value at which to start the range. /// If neither field is set, interpreted as the empty string, inclusive. #[derive(Clone, PartialEq, ::prost::Oneof)] pub enum StartValue { /// Used when giving an inclusive lower bound for the range. #[prost(bytes, tag = "1")] StartValueClosed(::prost::alloc::vec::Vec), /// Used when giving an exclusive lower bound for the range. #[prost(bytes, tag = "2")] StartValueOpen(::prost::alloc::vec::Vec), } /// The value at which to end the range. /// If neither field is set, interpreted as the infinite string, exclusive. #[derive(Clone, PartialEq, ::prost::Oneof)] pub enum EndValue { /// Used when giving an inclusive upper bound for the range. #[prost(bytes, tag = "3")] EndValueClosed(::prost::alloc::vec::Vec), /// Used when giving an exclusive upper bound for the range. #[prost(bytes, tag = "4")] EndValueOpen(::prost::alloc::vec::Vec), } } /// Takes a row as input and produces an alternate view of the row based on /// specified rules. For example, a RowFilter might trim down a row to include /// just the cells from columns matching a given regular expression, or might /// return all the cells of a row but not their values. More complicated filters /// can be composed out of these components to express requests such as, "within /// every column of a particular family, give just the two most recent cells /// which are older than timestamp X." /// /// There are two broad categories of RowFilters (true filters and transformers), /// as well as two ways to compose simple filters into more complex ones /// (chains and interleaves). They work as follows: /// /// * True filters alter the input row by excluding some of its cells wholesale /// from the output row. An example of a true filter is the `value_regex_filter`, /// which excludes cells whose values don't match the specified pattern. All /// regex true filters use RE2 syntax () /// in raw byte mode (RE2::Latin1), and are evaluated as full matches. An /// important point to keep in mind is that `RE2(.)` is equivalent by default to /// `RE2(\[^\n\])`, meaning that it does not match newlines. When attempting to /// match an arbitrary byte, you should therefore use the escape sequence `\C`, /// which may need to be further escaped as `\\C` in your client language. /// /// * Transformers alter the input row by changing the values of some of its /// cells in the output, without excluding them completely. Currently, the only /// supported transformer is the `strip_value_transformer`, which replaces every /// cell's value with the empty string. /// /// * Chains and interleaves are described in more detail in the /// RowFilter.Chain and RowFilter.Interleave documentation. /// /// The total serialized size of a RowFilter message must not /// exceed 4096 bytes, and RowFilters may not be nested within each other /// (in Chains or Interleaves) to a depth of more than 20. #[derive(Clone, PartialEq, ::prost::Message)] pub struct RowFilter { /// Which of the possible RowFilter types to apply. If none are set, this /// RowFilter returns all cells in the input row. #[prost( oneof = "row_filter::Filter", tags = "1, 2, 3, 16, 17, 18, 4, 14, 5, 6, 7, 8, 9, 15, 10, 11, 12, 13, 19" )] pub filter: ::core::option::Option, } /// Nested message and enum types in `RowFilter`. pub mod row_filter { /// A RowFilter which sends rows through several RowFilters in sequence. #[derive(Clone, PartialEq, ::prost::Message)] pub struct Chain { /// The elements of "filters" are chained together to process the input row: /// in row -> f(0) -> intermediate row -> f(1) -> ... -> f(N) -> out row /// The full chain is executed atomically. #[prost(message, repeated, tag = "1")] pub filters: ::prost::alloc::vec::Vec, } /// A RowFilter which sends each row to each of several component /// RowFilters and interleaves the results. #[derive(Clone, PartialEq, ::prost::Message)] pub struct Interleave { /// The elements of "filters" all process a copy of the input row, and the /// results are pooled, sorted, and combined into a single output row. /// If multiple cells are produced with the same column and timestamp, /// they will all appear in the output row in an unspecified mutual order. /// Consider the following example, with three filters: /// /// input row /// | /// ----------------------------------------------------- /// | | | /// f(0) f(1) f(2) /// | | | /// 1: foo,bar,10,x foo,bar,10,z far,bar,7,a /// 2: foo,blah,11,z far,blah,5,x far,blah,5,x /// | | | /// ----------------------------------------------------- /// | /// 1: foo,bar,10,z // could have switched with #2 /// 2: foo,bar,10,x // could have switched with #1 /// 3: foo,blah,11,z /// 4: far,bar,7,a /// 5: far,blah,5,x // identical to #6 /// 6: far,blah,5,x // identical to #5 /// /// All interleaved filters are executed atomically. #[prost(message, repeated, tag = "1")] pub filters: ::prost::alloc::vec::Vec, } /// A RowFilter which evaluates one of two possible RowFilters, depending on /// whether or not a predicate RowFilter outputs any cells from the input row. /// /// IMPORTANT NOTE: The predicate filter does not execute atomically with the /// true and false filters, which may lead to inconsistent or unexpected /// results. Additionally, Condition filters have poor performance, especially /// when filters are set for the false condition. #[derive(Clone, PartialEq, ::prost::Message)] pub struct Condition { /// If `predicate_filter` outputs any cells, then `true_filter` will be /// evaluated on the input row. Otherwise, `false_filter` will be evaluated. #[prost(message, optional, boxed, tag = "1")] pub predicate_filter: ::core::option::Option<::prost::alloc::boxed::Box>, /// The filter to apply to the input row if `predicate_filter` returns any /// results. If not provided, no results will be returned in the true case. #[prost(message, optional, boxed, tag = "2")] pub true_filter: ::core::option::Option<::prost::alloc::boxed::Box>, /// The filter to apply to the input row if `predicate_filter` does not /// return any results. If not provided, no results will be returned in the /// false case. #[prost(message, optional, boxed, tag = "3")] pub false_filter: ::core::option::Option<::prost::alloc::boxed::Box>, } /// Which of the possible RowFilter types to apply. If none are set, this /// RowFilter returns all cells in the input row. #[derive(Clone, PartialEq, ::prost::Oneof)] pub enum Filter { /// Applies several RowFilters to the data in sequence, progressively /// narrowing the results. #[prost(message, tag = "1")] Chain(Chain), /// Applies several RowFilters to the data in parallel and combines the /// results. #[prost(message, tag = "2")] Interleave(Interleave), /// Applies one of two possible RowFilters to the data based on the output of /// a predicate RowFilter. #[prost(message, tag = "3")] Condition(::prost::alloc::boxed::Box), /// ADVANCED USE ONLY. /// Hook for introspection into the RowFilter. Outputs all cells directly to /// the output of the read rather than to any parent filter. Consider the /// following example: /// /// Chain( /// FamilyRegex("A"), /// Interleave( /// All(), /// Chain(Label("foo"), Sink()) /// ), /// QualifierRegex("B") /// ) /// /// A,A,1,w /// A,B,2,x /// B,B,4,z /// | /// FamilyRegex("A") /// | /// A,A,1,w /// A,B,2,x /// | /// +------------+-------------+ /// | | /// All() Label(foo) /// | | /// A,A,1,w A,A,1,w,labels:\[foo\] /// A,B,2,x A,B,2,x,labels:\[foo\] /// | | /// | Sink() --------------+ /// | | | /// +------------+ x------+ A,A,1,w,labels:\[foo\] /// | A,B,2,x,labels:\[foo\] /// A,A,1,w | /// A,B,2,x | /// | | /// QualifierRegex("B") | /// | | /// A,B,2,x | /// | | /// +--------------------------------+ /// | /// A,A,1,w,labels:\[foo\] /// A,B,2,x,labels:\[foo\] // could be switched /// A,B,2,x // could be switched /// /// Despite being excluded by the qualifier filter, a copy of every cell /// that reaches the sink is present in the final result. /// /// As with an \[Interleave][google.bigtable.v2.RowFilter.Interleave\], /// duplicate cells are possible, and appear in an unspecified mutual order. /// In this case we have a duplicate with column "A:B" and timestamp 2, /// because one copy passed through the all filter while the other was /// passed through the label and sink. Note that one copy has label "foo", /// while the other does not. /// /// Cannot be used within the `predicate_filter`, `true_filter`, or /// `false_filter` of a \[Condition][google.bigtable.v2.RowFilter.Condition\]. #[prost(bool, tag = "16")] Sink(bool), /// Matches all cells, regardless of input. Functionally equivalent to /// leaving `filter` unset, but included for completeness. #[prost(bool, tag = "17")] PassAllFilter(bool), /// Does not match any cells, regardless of input. Useful for temporarily /// disabling just part of a filter. #[prost(bool, tag = "18")] BlockAllFilter(bool), /// Matches only cells from rows whose keys satisfy the given RE2 regex. In /// other words, passes through the entire row when the key matches, and /// otherwise produces an empty row. /// Note that, since row keys can contain arbitrary bytes, the `\C` escape /// sequence must be used if a true wildcard is desired. The `.` character /// will not match the new line character `\n`, which may be present in a /// binary key. #[prost(bytes, tag = "4")] RowKeyRegexFilter(::prost::alloc::vec::Vec), /// Matches all cells from a row with probability p, and matches no cells /// from the row with probability 1-p. #[prost(double, tag = "14")] RowSampleFilter(f64), /// Matches only cells from columns whose families satisfy the given RE2 /// regex. For technical reasons, the regex must not contain the `:` /// character, even if it is not being used as a literal. /// Note that, since column families cannot contain the new line character /// `\n`, it is sufficient to use `.` as a full wildcard when matching /// column family names. #[prost(string, tag = "5")] FamilyNameRegexFilter(::prost::alloc::string::String), /// Matches only cells from columns whose qualifiers satisfy the given RE2 /// regex. /// Note that, since column qualifiers can contain arbitrary bytes, the `\C` /// escape sequence must be used if a true wildcard is desired. The `.` /// character will not match the new line character `\n`, which may be /// present in a binary qualifier. #[prost(bytes, tag = "6")] ColumnQualifierRegexFilter(::prost::alloc::vec::Vec), /// Matches only cells from columns within the given range. #[prost(message, tag = "7")] ColumnRangeFilter(super::ColumnRange), /// Matches only cells with timestamps within the given range. #[prost(message, tag = "8")] TimestampRangeFilter(super::TimestampRange), /// Matches only cells with values that satisfy the given regular expression. /// Note that, since cell values can contain arbitrary bytes, the `\C` escape /// sequence must be used if a true wildcard is desired. The `.` character /// will not match the new line character `\n`, which may be present in a /// binary value. #[prost(bytes, tag = "9")] ValueRegexFilter(::prost::alloc::vec::Vec), /// Matches only cells with values that fall within the given range. #[prost(message, tag = "15")] ValueRangeFilter(super::ValueRange), /// Skips the first N cells of each row, matching all subsequent cells. /// If duplicate cells are present, as is possible when using an Interleave, /// each copy of the cell is counted separately. #[prost(int32, tag = "10")] CellsPerRowOffsetFilter(i32), /// Matches only the first N cells of each row. /// If duplicate cells are present, as is possible when using an Interleave, /// each copy of the cell is counted separately. #[prost(int32, tag = "11")] CellsPerRowLimitFilter(i32), /// Matches only the most recent N cells within each column. For example, /// if N=2, this filter would match column `foo:bar` at timestamps 10 and 9, /// skip all earlier cells in `foo:bar`, and then begin matching again in /// column `foo:bar2`. /// If duplicate cells are present, as is possible when using an Interleave, /// each copy of the cell is counted separately. #[prost(int32, tag = "12")] CellsPerColumnLimitFilter(i32), /// Replaces each cell's value with the empty string. #[prost(bool, tag = "13")] StripValueTransformer(bool), /// Applies the given label to all cells in the output row. This allows /// the client to determine which results were produced from which part of /// the filter. /// /// Values must be at most 15 characters in length, and match the RE2 /// pattern `\[a-z0-9\\-\]+` /// /// Due to a technical limitation, it is not currently possible to apply /// multiple labels to a cell. As a result, a Chain may have no more than /// one sub-filter which contains a `apply_label_transformer`. It is okay for /// an Interleave to contain multiple `apply_label_transformers`, as they /// will be applied to separate copies of the input. This may be relaxed in /// the future. #[prost(string, tag = "19")] ApplyLabelTransformer(::prost::alloc::string::String), } } /// Specifies a particular change to be made to the contents of a row. #[derive(Clone, PartialEq, ::prost::Message)] pub struct Mutation { /// Which of the possible Mutation types to apply. #[prost(oneof = "mutation::Mutation", tags = "1, 2, 3, 4")] pub mutation: ::core::option::Option, } /// Nested message and enum types in `Mutation`. pub mod mutation { /// A Mutation which sets the value of the specified cell. #[derive(Clone, PartialEq, ::prost::Message)] pub struct SetCell { /// The name of the family into which new data should be written. /// Must match `\[-_.a-zA-Z0-9\]+` #[prost(string, tag = "1")] pub family_name: ::prost::alloc::string::String, /// The qualifier of the column into which new data should be written. /// Can be any byte string, including the empty string. #[prost(bytes = "vec", tag = "2")] pub column_qualifier: ::prost::alloc::vec::Vec, /// The timestamp of the cell into which new data should be written. /// Use -1 for current Bigtable server time. /// Otherwise, the client should set this value itself, noting that the /// default value is a timestamp of zero if the field is left unspecified. /// Values must match the granularity of the table (e.g. micros, millis). #[prost(int64, tag = "3")] pub timestamp_micros: i64, /// The value to be written into the specified cell. #[prost(bytes = "vec", tag = "4")] pub value: ::prost::alloc::vec::Vec, } /// A Mutation which deletes cells from the specified column, optionally /// restricting the deletions to a given timestamp range. #[derive(Clone, PartialEq, ::prost::Message)] pub struct DeleteFromColumn { /// The name of the family from which cells should be deleted. /// Must match `\[-_.a-zA-Z0-9\]+` #[prost(string, tag = "1")] pub family_name: ::prost::alloc::string::String, /// The qualifier of the column from which cells should be deleted. /// Can be any byte string, including the empty string. #[prost(bytes = "vec", tag = "2")] pub column_qualifier: ::prost::alloc::vec::Vec, /// The range of timestamps within which cells should be deleted. #[prost(message, optional, tag = "3")] pub time_range: ::core::option::Option, } /// A Mutation which deletes all cells from the specified column family. #[derive(Clone, PartialEq, ::prost::Message)] pub struct DeleteFromFamily { /// The name of the family from which cells should be deleted. /// Must match `\[-_.a-zA-Z0-9\]+` #[prost(string, tag = "1")] pub family_name: ::prost::alloc::string::String, } /// A Mutation which deletes all cells from the containing row. #[derive(Clone, PartialEq, ::prost::Message)] pub struct DeleteFromRow {} /// Which of the possible Mutation types to apply. #[derive(Clone, PartialEq, ::prost::Oneof)] pub enum Mutation { /// Set a cell's value. #[prost(message, tag = "1")] SetCell(SetCell), /// Deletes cells from a column. #[prost(message, tag = "2")] DeleteFromColumn(DeleteFromColumn), /// Deletes cells from a column family. #[prost(message, tag = "3")] DeleteFromFamily(DeleteFromFamily), /// Deletes cells from the entire row. #[prost(message, tag = "4")] DeleteFromRow(DeleteFromRow), } } /// Specifies an atomic read/modify/write operation on the latest value of the /// specified column. #[derive(Clone, PartialEq, ::prost::Message)] pub struct ReadModifyWriteRule { /// The name of the family to which the read/modify/write should be applied. /// Must match `\[-_.a-zA-Z0-9\]+` #[prost(string, tag = "1")] pub family_name: ::prost::alloc::string::String, /// The qualifier of the column to which the read/modify/write should be /// applied. /// Can be any byte string, including the empty string. #[prost(bytes = "vec", tag = "2")] pub column_qualifier: ::prost::alloc::vec::Vec, /// The rule used to determine the column's new latest value from its current /// latest value. #[prost(oneof = "read_modify_write_rule::Rule", tags = "3, 4")] pub rule: ::core::option::Option, } /// Nested message and enum types in `ReadModifyWriteRule`. pub mod read_modify_write_rule { /// The rule used to determine the column's new latest value from its current /// latest value. #[derive(Clone, PartialEq, ::prost::Oneof)] pub enum Rule { /// Rule specifying that `append_value` be appended to the existing value. /// If the targeted cell is unset, it will be treated as containing the /// empty string. #[prost(bytes, tag = "3")] AppendValue(::prost::alloc::vec::Vec), /// Rule specifying that `increment_amount` be added to the existing value. /// If the targeted cell is unset, it will be treated as containing a zero. /// Otherwise, the targeted cell must contain an 8-byte value (interpreted /// as a 64-bit big-endian signed integer), or the entire request will fail. #[prost(int64, tag = "4")] IncrementAmount(i64), } } /// Request message for Bigtable.ReadRows. #[derive(Clone, PartialEq, ::prost::Message)] pub struct ReadRowsRequest { /// Required. The unique name of the table from which to read. /// Values are of the form /// `projects//instances//tables/`. #[prost(string, tag = "1")] pub table_name: ::prost::alloc::string::String, /// This value specifies routing for replication. If not specified, the /// "default" application profile will be used. #[prost(string, tag = "5")] pub app_profile_id: ::prost::alloc::string::String, /// The row keys and/or ranges to read. If not specified, reads from all rows. #[prost(message, optional, tag = "2")] pub rows: ::core::option::Option, /// The filter to apply to the contents of the specified row(s). If unset, /// reads the entirety of each row. #[prost(message, optional, tag = "3")] pub filter: ::core::option::Option, /// The read will terminate after committing to N rows' worth of results. The /// default (zero) is to return all results. #[prost(int64, tag = "4")] pub rows_limit: i64, } /// Response message for Bigtable.ReadRows. #[derive(Clone, PartialEq, ::prost::Message)] pub struct ReadRowsResponse { /// A collection of a row's contents as part of the read request. #[prost(message, repeated, tag = "1")] pub chunks: ::prost::alloc::vec::Vec, /// Optionally the server might return the row key of the last row it /// has scanned. The client can use this to construct a more /// efficient retry request if needed: any row keys or portions of /// ranges less than this row key can be dropped from the request. /// This is primarily useful for cases where the server has read a /// lot of data that was filtered out since the last committed row /// key, allowing the client to skip that work on a retry. #[prost(bytes = "vec", tag = "2")] pub last_scanned_row_key: ::prost::alloc::vec::Vec, } /// Nested message and enum types in `ReadRowsResponse`. pub mod read_rows_response { /// Specifies a piece of a row's contents returned as part of the read /// response stream. #[derive(Clone, PartialEq, ::prost::Message)] pub struct CellChunk { /// The row key for this chunk of data. If the row key is empty, /// this CellChunk is a continuation of the same row as the previous /// CellChunk in the response stream, even if that CellChunk was in a /// previous ReadRowsResponse message. #[prost(bytes = "vec", tag = "1")] pub row_key: ::prost::alloc::vec::Vec, /// The column family name for this chunk of data. If this message /// is not present this CellChunk is a continuation of the same column /// family as the previous CellChunk. The empty string can occur as a /// column family name in a response so clients must check /// explicitly for the presence of this message, not just for /// `family_name.value` being non-empty. #[prost(message, optional, tag = "2")] pub family_name: ::core::option::Option<::prost::alloc::string::String>, /// The column qualifier for this chunk of data. If this message /// is not present, this CellChunk is a continuation of the same column /// as the previous CellChunk. Column qualifiers may be empty so /// clients must check for the presence of this message, not just /// for `qualifier.value` being non-empty. #[prost(message, optional, tag = "3")] pub qualifier: ::core::option::Option<::prost::alloc::vec::Vec>, /// The cell's stored timestamp, which also uniquely identifies it /// within its column. Values are always expressed in /// microseconds, but individual tables may set a coarser /// granularity to further restrict the allowed values. For /// example, a table which specifies millisecond granularity will /// only allow values of `timestamp_micros` which are multiples of /// 1000. Timestamps are only set in the first CellChunk per cell /// (for cells split into multiple chunks). #[prost(int64, tag = "4")] pub timestamp_micros: i64, /// Labels applied to the cell by a /// \[RowFilter][google.bigtable.v2.RowFilter\]. Labels are only set /// on the first CellChunk per cell. #[prost(string, repeated, tag = "5")] pub labels: ::prost::alloc::vec::Vec<::prost::alloc::string::String>, /// The value stored in the cell. Cell values can be split across /// multiple CellChunks. In that case only the value field will be /// set in CellChunks after the first: the timestamp and labels /// will only be present in the first CellChunk, even if the first /// CellChunk came in a previous ReadRowsResponse. #[prost(bytes = "vec", tag = "6")] pub value: ::prost::alloc::vec::Vec, /// If this CellChunk is part of a chunked cell value and this is /// not the final chunk of that cell, value_size will be set to the /// total length of the cell value. The client can use this size /// to pre-allocate memory to hold the full cell value. #[prost(int32, tag = "7")] pub value_size: i32, /// Signals to the client concerning previous CellChunks received. #[prost(oneof = "cell_chunk::RowStatus", tags = "8, 9")] pub row_status: ::core::option::Option, } /// Nested message and enum types in `CellChunk`. pub mod cell_chunk { /// Signals to the client concerning previous CellChunks received. #[derive(Clone, PartialEq, ::prost::Oneof)] pub enum RowStatus { /// Indicates that the client should drop all previous chunks for /// `row_key`, as it will be re-read from the beginning. #[prost(bool, tag = "8")] ResetRow(bool), /// Indicates that the client can safely process all previous chunks for /// `row_key`, as its data has been fully read. #[prost(bool, tag = "9")] CommitRow(bool), } } } /// Request message for Bigtable.SampleRowKeys. #[derive(Clone, PartialEq, ::prost::Message)] pub struct SampleRowKeysRequest { /// Required. The unique name of the table from which to sample row keys. /// Values are of the form /// `projects//instances//tables/
`. #[prost(string, tag = "1")] pub table_name: ::prost::alloc::string::String, /// This value specifies routing for replication. If not specified, the /// "default" application profile will be used. #[prost(string, tag = "2")] pub app_profile_id: ::prost::alloc::string::String, } /// Response message for Bigtable.SampleRowKeys. #[derive(Clone, PartialEq, ::prost::Message)] pub struct SampleRowKeysResponse { /// Sorted streamed sequence of sample row keys in the table. The table might /// have contents before the first row key in the list and after the last one, /// but a key containing the empty string indicates "end of table" and will be /// the last response given, if present. /// Note that row keys in this list may not have ever been written to or read /// from, and users should therefore not make any assumptions about the row key /// structure that are specific to their use case. #[prost(bytes = "vec", tag = "1")] pub row_key: ::prost::alloc::vec::Vec, /// Approximate total storage space used by all rows in the table which precede /// `row_key`. Buffering the contents of all rows between two subsequent /// samples would require space roughly equal to the difference in their /// `offset_bytes` fields. #[prost(int64, tag = "2")] pub offset_bytes: i64, } /// Request message for Bigtable.MutateRow. #[derive(Clone, PartialEq, ::prost::Message)] pub struct MutateRowRequest { /// Required. The unique name of the table to which the mutation should be applied. /// Values are of the form /// `projects//instances//tables/
`. #[prost(string, tag = "1")] pub table_name: ::prost::alloc::string::String, /// This value specifies routing for replication. If not specified, the /// "default" application profile will be used. #[prost(string, tag = "4")] pub app_profile_id: ::prost::alloc::string::String, /// Required. The key of the row to which the mutation should be applied. #[prost(bytes = "vec", tag = "2")] pub row_key: ::prost::alloc::vec::Vec, /// Required. Changes to be atomically applied to the specified row. Entries are applied /// in order, meaning that earlier mutations can be masked by later ones. /// Must contain at least one entry and at most 100000. #[prost(message, repeated, tag = "3")] pub mutations: ::prost::alloc::vec::Vec, } /// Response message for Bigtable.MutateRow. #[derive(Clone, PartialEq, ::prost::Message)] pub struct MutateRowResponse {} /// Request message for BigtableService.MutateRows. #[derive(Clone, PartialEq, ::prost::Message)] pub struct MutateRowsRequest { /// Required. The unique name of the table to which the mutations should be applied. #[prost(string, tag = "1")] pub table_name: ::prost::alloc::string::String, /// This value specifies routing for replication. If not specified, the /// "default" application profile will be used. #[prost(string, tag = "3")] pub app_profile_id: ::prost::alloc::string::String, /// Required. The row keys and corresponding mutations to be applied in bulk. /// Each entry is applied as an atomic mutation, but the entries may be /// applied in arbitrary order (even between entries for the same row). /// At least one entry must be specified, and in total the entries can /// contain at most 100000 mutations. #[prost(message, repeated, tag = "2")] pub entries: ::prost::alloc::vec::Vec, } /// Nested message and enum types in `MutateRowsRequest`. pub mod mutate_rows_request { /// A mutation for a given row. #[derive(Clone, PartialEq, ::prost::Message)] pub struct Entry { /// The key of the row to which the `mutations` should be applied. #[prost(bytes = "vec", tag = "1")] pub row_key: ::prost::alloc::vec::Vec, /// Required. Changes to be atomically applied to the specified row. Mutations are /// applied in order, meaning that earlier mutations can be masked by /// later ones. /// You must specify at least one mutation. #[prost(message, repeated, tag = "2")] pub mutations: ::prost::alloc::vec::Vec, } } /// Response message for BigtableService.MutateRows. #[derive(Clone, PartialEq, ::prost::Message)] pub struct MutateRowsResponse { /// One or more results for Entries from the batch request. #[prost(message, repeated, tag = "1")] pub entries: ::prost::alloc::vec::Vec, } /// Nested message and enum types in `MutateRowsResponse`. pub mod mutate_rows_response { /// The result of applying a passed mutation in the original request. #[derive(Clone, PartialEq, ::prost::Message)] pub struct Entry { /// The index into the original request's `entries` list of the Entry /// for which a result is being reported. #[prost(int64, tag = "1")] pub index: i64, /// The result of the request Entry identified by `index`. /// Depending on how requests are batched during execution, it is possible /// for one Entry to fail due to an error with another Entry. In the event /// that this occurs, the same error will be reported for both entries. #[prost(message, optional, tag = "2")] pub status: ::core::option::Option, } } /// Request message for Bigtable.CheckAndMutateRow. #[derive(Clone, PartialEq, ::prost::Message)] pub struct CheckAndMutateRowRequest { /// Required. The unique name of the table to which the conditional mutation should be /// applied. /// Values are of the form /// `projects//instances//tables/
`. #[prost(string, tag = "1")] pub table_name: ::prost::alloc::string::String, /// This value specifies routing for replication. If not specified, the /// "default" application profile will be used. #[prost(string, tag = "7")] pub app_profile_id: ::prost::alloc::string::String, /// Required. The key of the row to which the conditional mutation should be applied. #[prost(bytes = "vec", tag = "2")] pub row_key: ::prost::alloc::vec::Vec, /// The filter to be applied to the contents of the specified row. Depending /// on whether or not any results are yielded, either `true_mutations` or /// `false_mutations` will be executed. If unset, checks that the row contains /// any values at all. #[prost(message, optional, tag = "6")] pub predicate_filter: ::core::option::Option, /// Changes to be atomically applied to the specified row if `predicate_filter` /// yields at least one cell when applied to `row_key`. Entries are applied in /// order, meaning that earlier mutations can be masked by later ones. /// Must contain at least one entry if `false_mutations` is empty, and at most /// 100000. #[prost(message, repeated, tag = "4")] pub true_mutations: ::prost::alloc::vec::Vec, /// Changes to be atomically applied to the specified row if `predicate_filter` /// does not yield any cells when applied to `row_key`. Entries are applied in /// order, meaning that earlier mutations can be masked by later ones. /// Must contain at least one entry if `true_mutations` is empty, and at most /// 100000. #[prost(message, repeated, tag = "5")] pub false_mutations: ::prost::alloc::vec::Vec, } /// Response message for Bigtable.CheckAndMutateRow. #[derive(Clone, PartialEq, ::prost::Message)] pub struct CheckAndMutateRowResponse { /// Whether or not the request's `predicate_filter` yielded any results for /// the specified row. #[prost(bool, tag = "1")] pub predicate_matched: bool, } /// Request message for Bigtable.ReadModifyWriteRow. #[derive(Clone, PartialEq, ::prost::Message)] pub struct ReadModifyWriteRowRequest { /// Required. The unique name of the table to which the read/modify/write rules should be /// applied. /// Values are of the form /// `projects//instances//tables/
`. #[prost(string, tag = "1")] pub table_name: ::prost::alloc::string::String, /// This value specifies routing for replication. If not specified, the /// "default" application profile will be used. #[prost(string, tag = "4")] pub app_profile_id: ::prost::alloc::string::String, /// Required. The key of the row to which the read/modify/write rules should be applied. #[prost(bytes = "vec", tag = "2")] pub row_key: ::prost::alloc::vec::Vec, /// Required. Rules specifying how the specified row's contents are to be transformed /// into writes. Entries are applied in order, meaning that earlier rules will /// affect the results of later ones. #[prost(message, repeated, tag = "3")] pub rules: ::prost::alloc::vec::Vec, } /// Response message for Bigtable.ReadModifyWriteRow. #[derive(Clone, PartialEq, ::prost::Message)] pub struct ReadModifyWriteRowResponse { /// A Row containing the new contents of all cells modified by the request. #[prost(message, optional, tag = "1")] pub row: ::core::option::Option, } #[doc = r" Generated client implementations."] pub mod bigtable_client { #![allow(unused_variables, dead_code, missing_docs, clippy::let_unit_value)] use tonic::codegen::*; #[doc = " Service for reading from and writing to existing Bigtable tables."] #[derive(Debug, Clone)] pub struct BigtableClient { inner: tonic::client::Grpc, } impl BigtableClient where T: tonic::client::GrpcService, T::ResponseBody: Body + Send + 'static, T::Error: Into, ::Error: Into + Send, { pub fn new(inner: T) -> Self { let inner = tonic::client::Grpc::new(inner); Self { inner } } pub fn with_interceptor( inner: T, interceptor: F, ) -> BigtableClient> where F: tonic::service::Interceptor, T: tonic::codegen::Service< http::Request, Response = http::Response< >::ResponseBody, >, >, >>::Error: Into + Send + Sync, { BigtableClient::new(InterceptedService::new(inner, interceptor)) } #[doc = r" Compress requests with `gzip`."] #[doc = r""] #[doc = r" This requires the server to support it otherwise it might respond with an"] #[doc = r" error."] pub fn send_gzip(mut self) -> Self { self.inner = self.inner.send_gzip(); self } #[doc = r" Enable decompressing responses with `gzip`."] pub fn accept_gzip(mut self) -> Self { self.inner = self.inner.accept_gzip(); self } #[doc = " Streams back the contents of all requested rows in key order, optionally"] #[doc = " applying the same Reader filter to each. Depending on their size,"] #[doc = " rows and cells may be broken up across multiple responses, but"] #[doc = " atomicity of each row will still be preserved. See the"] #[doc = " ReadRowsResponse documentation for details."] pub async fn read_rows( &mut self, request: impl tonic::IntoRequest, ) -> Result>, tonic::Status> { self.inner.ready().await.map_err(|e| { tonic::Status::new( tonic::Code::Unknown, format!("Service was not ready: {}", e.into()), ) })?; let codec = tonic::codec::ProstCodec::default(); let path = http::uri::PathAndQuery::from_static("/google.bigtable.v2.Bigtable/ReadRows"); self.inner.server_streaming(request.into_request(), path, codec).await } #[doc = " Returns a sample of row keys in the table. The returned row keys will"] #[doc = " delimit contiguous sections of the table of approximately equal size,"] #[doc = " which can be used to break up the data for distributed tasks like"] #[doc = " mapreduces."] pub async fn sample_row_keys( &mut self, request: impl tonic::IntoRequest, ) -> Result< tonic::Response>, tonic::Status, > { self.inner.ready().await.map_err(|e| { tonic::Status::new( tonic::Code::Unknown, format!("Service was not ready: {}", e.into()), ) })?; let codec = tonic::codec::ProstCodec::default(); let path = http::uri::PathAndQuery::from_static("/google.bigtable.v2.Bigtable/SampleRowKeys"); self.inner.server_streaming(request.into_request(), path, codec).await } #[doc = " Mutates a row atomically. Cells already present in the row are left"] #[doc = " unchanged unless explicitly changed by `mutation`."] pub async fn mutate_row( &mut self, request: impl tonic::IntoRequest, ) -> Result, tonic::Status> { self.inner.ready().await.map_err(|e| { tonic::Status::new( tonic::Code::Unknown, format!("Service was not ready: {}", e.into()), ) })?; let codec = tonic::codec::ProstCodec::default(); let path = http::uri::PathAndQuery::from_static("/google.bigtable.v2.Bigtable/MutateRow"); self.inner.unary(request.into_request(), path, codec).await } #[doc = " Mutates multiple rows in a batch. Each individual row is mutated"] #[doc = " atomically as in MutateRow, but the entire batch is not executed"] #[doc = " atomically."] pub async fn mutate_rows( &mut self, request: impl tonic::IntoRequest, ) -> Result< tonic::Response>, tonic::Status, > { self.inner.ready().await.map_err(|e| { tonic::Status::new( tonic::Code::Unknown, format!("Service was not ready: {}", e.into()), ) })?; let codec = tonic::codec::ProstCodec::default(); let path = http::uri::PathAndQuery::from_static("/google.bigtable.v2.Bigtable/MutateRows"); self.inner.server_streaming(request.into_request(), path, codec).await } #[doc = " Mutates a row atomically based on the output of a predicate Reader filter."] pub async fn check_and_mutate_row( &mut self, request: impl tonic::IntoRequest, ) -> Result, tonic::Status> { self.inner.ready().await.map_err(|e| { tonic::Status::new( tonic::Code::Unknown, format!("Service was not ready: {}", e.into()), ) })?; let codec = tonic::codec::ProstCodec::default(); let path = http::uri::PathAndQuery::from_static( "/google.bigtable.v2.Bigtable/CheckAndMutateRow", ); self.inner.unary(request.into_request(), path, codec).await } #[doc = " Modifies a row atomically on the server. The method reads the latest"] #[doc = " existing timestamp and value from the specified columns and writes a new"] #[doc = " entry based on pre-defined read/modify/write rules. The new value for the"] #[doc = " timestamp is the greater of the existing timestamp or the current server"] #[doc = " time. The method returns the new contents of all modified cells."] pub async fn read_modify_write_row( &mut self, request: impl tonic::IntoRequest, ) -> Result, tonic::Status> { self.inner.ready().await.map_err(|e| { tonic::Status::new( tonic::Code::Unknown, format!("Service was not ready: {}", e.into()), ) })?; let codec = tonic::codec::ProstCodec::default(); let path = http::uri::PathAndQuery::from_static( "/google.bigtable.v2.Bigtable/ReadModifyWriteRow", ); self.inner.unary(request.into_request(), path, codec).await } } }