/******************************************************* HIDAPI - Multi-Platform library for communication with HID devices. Alan Ott Signal 11 Software libusb/hidapi Team Copyright 2022, All Rights Reserved. At the discretion of the user of this library, this software may be licensed under the terms of the GNU General Public License v3, a BSD-Style license, or the original HIDAPI license as outlined in the LICENSE.txt, LICENSE-gpl3.txt, LICENSE-bsd.txt, and LICENSE-orig.txt files located at the root of the source distribution. These files may also be found in the public source code repository located at: https://github.com/libusb/hidapi . ********************************************************/ #define _GNU_SOURCE /* needed for wcsdup() before glibc 2.10 */ /* C */ #include #include #include #include #include #include /* Unix */ #include #include #include #include #include #include #include /* GNU / LibUSB */ #include #if !defined(__ANDROID__) && !defined(NO_ICONV) #include #ifndef ICONV_CONST #define ICONV_CONST #endif #endif #include "hidapi_libusb.h" #ifndef HIDAPI_THREAD_MODEL_INCLUDE #define HIDAPI_THREAD_MODEL_INCLUDE "hidapi_thread_pthread.h" #endif #include HIDAPI_THREAD_MODEL_INCLUDE #ifdef __cplusplus extern "C" { #endif #ifdef DEBUG_PRINTF #define LOG(...) fprintf(stderr, __VA_ARGS__) #else #define LOG(...) do {} while (0) #endif #ifndef __FreeBSD__ #define DETACH_KERNEL_DRIVER #endif /* Uncomment to enable the retrieval of Usage and Usage Page in hid_enumerate(). Warning, on platforms different from FreeBSD this is very invasive as it requires the detach and re-attach of the kernel driver. See comments inside hid_enumerate(). libusb HIDAPI programs are encouraged to use the interface number instead to differentiate between interfaces on a composite HID device. */ /*#define INVASIVE_GET_USAGE*/ /* Linked List of input reports received from the device. */ struct input_report { uint8_t *data; size_t len; struct input_report *next; }; struct hid_device_ { /* Handle to the actual device. */ libusb_device_handle *device_handle; /* USB Configuration Number of the device */ int config_number; /* The interface number of the HID */ int interface; uint16_t report_descriptor_size; /* Endpoint information */ int input_endpoint; int output_endpoint; int input_ep_max_packet_size; /* Indexes of Strings */ int manufacturer_index; int product_index; int serial_index; struct hid_device_info* device_info; /* Whether blocking reads are used */ int blocking; /* boolean */ /* Read thread objects */ hidapi_thread_state thread_state; int shutdown_thread; int transfer_loop_finished; struct libusb_transfer *transfer; /* List of received input reports. */ struct input_report *input_reports; /* Was kernel driver detached by libusb */ #ifdef DETACH_KERNEL_DRIVER int is_driver_detached; #endif }; static struct hid_api_version api_version = { .major = HID_API_VERSION_MAJOR, .minor = HID_API_VERSION_MINOR, .patch = HID_API_VERSION_PATCH }; static libusb_context *usb_context = NULL; uint16_t get_usb_code_for_current_locale(void); static int return_data(hid_device *dev, unsigned char *data, size_t length); static hid_device *new_hid_device(void) { hid_device *dev = (hid_device*) calloc(1, sizeof(hid_device)); dev->blocking = 1; hidapi_thread_state_init(&dev->thread_state); return dev; } static void free_hid_device(hid_device *dev) { /* Clean up the thread objects */ hidapi_thread_state_destroy(&dev->thread_state); hid_free_enumeration(dev->device_info); /* Free the device itself */ free(dev); } #if 0 /*TODO: Implement this function on hidapi/libusb.. */ static void register_error(hid_device *dev, const char *op) { } #endif /* Get bytes from a HID Report Descriptor. Only call with a num_bytes of 0, 1, 2, or 4. */ static uint32_t get_bytes(uint8_t *rpt, size_t len, size_t num_bytes, size_t cur) { /* Return if there aren't enough bytes. */ if (cur + num_bytes >= len) return 0; if (num_bytes == 0) return 0; else if (num_bytes == 1) { return rpt[cur+1]; } else if (num_bytes == 2) { return (rpt[cur+2] * 256 + rpt[cur+1]); } else if (num_bytes == 4) { return (rpt[cur+4] * 0x01000000 + rpt[cur+3] * 0x00010000 + rpt[cur+2] * 0x00000100 + rpt[cur+1] * 0x00000001); } else return 0; } /* Retrieves the device's Usage Page and Usage from the report descriptor. The algorithm is simple, as it just returns the first Usage and Usage Page that it finds in the descriptor. The return value is 0 on success and -1 on failure. */ static int get_usage(uint8_t *report_descriptor, size_t size, unsigned short *usage_page, unsigned short *usage) { unsigned int i = 0; int size_code; int data_len, key_size; int usage_found = 0, usage_page_found = 0; while (i < size) { int key = report_descriptor[i]; int key_cmd = key & 0xfc; //printf("key: %02hhx\n", key); if ((key & 0xf0) == 0xf0) { /* This is a Long Item. The next byte contains the length of the data section (value) for this key. See the HID specification, version 1.11, section 6.2.2.3, titled "Long Items." */ if (i+1 < size) data_len = report_descriptor[i+1]; else data_len = 0; /* malformed report */ key_size = 3; } else { /* This is a Short Item. The bottom two bits of the key contain the size code for the data section (value) for this key. Refer to the HID specification, version 1.11, section 6.2.2.2, titled "Short Items." */ size_code = key & 0x3; switch (size_code) { case 0: case 1: case 2: data_len = size_code; break; case 3: data_len = 4; break; default: /* Can't ever happen since size_code is & 0x3 */ data_len = 0; break; }; key_size = 1; } if (key_cmd == 0x4) { *usage_page = get_bytes(report_descriptor, size, data_len, i); usage_page_found = 1; //printf("Usage Page: %x\n", (uint32_t)*usage_page); } if (key_cmd == 0x8) { *usage = get_bytes(report_descriptor, size, data_len, i); usage_found = 1; //printf("Usage: %x\n", (uint32_t)*usage); } if (usage_page_found && usage_found) return 0; /* success */ /* Skip over this key and it's associated data */ i += data_len + key_size; } return -1; /* failure */ } #if defined(__FreeBSD__) && __FreeBSD__ < 10 /* The libusb version included in FreeBSD < 10 doesn't have this function. In mainline libusb, it's inlined in libusb.h. This function will bear a striking resemblance to that one, because there's about one way to code it. Note that the data parameter is Unicode in UTF-16LE encoding. Return value is the number of bytes in data, or LIBUSB_ERROR_*. */ static inline int libusb_get_string_descriptor(libusb_device_handle *dev, uint8_t descriptor_index, uint16_t lang_id, unsigned char *data, int length) { return libusb_control_transfer(dev, LIBUSB_ENDPOINT_IN | 0x0, /* Endpoint 0 IN */ LIBUSB_REQUEST_GET_DESCRIPTOR, (LIBUSB_DT_STRING << 8) | descriptor_index, lang_id, data, (uint16_t) length, 1000); } #endif /* Get the first language the device says it reports. This comes from USB string #0. */ static uint16_t get_first_language(libusb_device_handle *dev) { uint16_t buf[32]; int len; /* Get the string from libusb. */ len = libusb_get_string_descriptor(dev, 0x0, /* String ID */ 0x0, /* Language */ (unsigned char*)buf, sizeof(buf)); if (len < 4) return 0x0; return buf[1]; /* First two bytes are len and descriptor type. */ } static int is_language_supported(libusb_device_handle *dev, uint16_t lang) { uint16_t buf[32]; int len; int i; /* Get the string from libusb. */ len = libusb_get_string_descriptor(dev, 0x0, /* String ID */ 0x0, /* Language */ (unsigned char*)buf, sizeof(buf)); if (len < 4) return 0x0; len /= 2; /* language IDs are two-bytes each. */ /* Start at index 1 because there are two bytes of protocol data. */ for (i = 1; i < len; i++) { if (buf[i] == lang) return 1; } return 0; } /* This function returns a newly allocated wide string containing the USB device string numbered by the index. The returned string must be freed by using free(). */ static wchar_t *get_usb_string(libusb_device_handle *dev, uint8_t idx) { char buf[512]; int len; wchar_t *str = NULL; #if !defined(__ANDROID__) && !defined(NO_ICONV) /* we don't use iconv on Android, or when it is explicitly disabled */ wchar_t wbuf[256]; /* iconv variables */ iconv_t ic; size_t inbytes; size_t outbytes; size_t res; ICONV_CONST char *inptr; char *outptr; #endif /* Determine which language to use. */ uint16_t lang; lang = get_usb_code_for_current_locale(); if (!is_language_supported(dev, lang)) lang = get_first_language(dev); /* Get the string from libusb. */ len = libusb_get_string_descriptor(dev, idx, lang, (unsigned char*)buf, sizeof(buf)); if (len < 2) /* we always skip first 2 bytes */ return NULL; #if defined(__ANDROID__) || defined(NO_ICONV) /* Bionic does not have iconv support nor wcsdup() function, so it has to be done manually. The following code will only work for code points that can be represented as a single UTF-16 character, and will incorrectly convert any code points which require more than one UTF-16 character. Skip over the first character (2-bytes). */ len -= 2; str = (wchar_t*) malloc((len / 2 + 1) * sizeof(wchar_t)); int i; for (i = 0; i < len / 2; i++) { str[i] = buf[i * 2 + 2] | (buf[i * 2 + 3] << 8); } str[len / 2] = 0x00000000; #else /* buf does not need to be explicitly NULL-terminated because it is only passed into iconv() which does not need it. */ /* Initialize iconv. */ ic = iconv_open("WCHAR_T", "UTF-16LE"); if (ic == (iconv_t)-1) { LOG("iconv_open() failed\n"); return NULL; } /* Convert to native wchar_t (UTF-32 on glibc/BSD systems). Skip the first character (2-bytes). */ inptr = buf+2; inbytes = len-2; outptr = (char*) wbuf; outbytes = sizeof(wbuf); res = iconv(ic, &inptr, &inbytes, &outptr, &outbytes); if (res == (size_t)-1) { LOG("iconv() failed\n"); goto err; } /* Write the terminating NULL. */ wbuf[sizeof(wbuf)/sizeof(wbuf[0])-1] = 0x00000000; if (outbytes >= sizeof(wbuf[0])) *((wchar_t*)outptr) = 0x00000000; /* Allocate and copy the string. */ str = wcsdup(wbuf); err: iconv_close(ic); #endif return str; } /** Max length of the result: "000-000.000.000.000.000.000.000:000.000" (39 chars). 64 is used for simplicity/alignment. */ static void get_path(char (*result)[64], libusb_device *dev, int config_number, int interface_number) { char *str = *result; /* Note that USB3 port count limit is 7; use 8 here for alignment */ uint8_t port_numbers[8] = {0, 0, 0, 0, 0, 0, 0, 0}; int num_ports = libusb_get_port_numbers(dev, port_numbers, 8); if (num_ports > 0) { int n = snprintf(str, sizeof("000-000"), "%u-%u", libusb_get_bus_number(dev), port_numbers[0]); for (uint8_t i = 1; i < num_ports; i++) { n += snprintf(&str[n], sizeof(".000"), ".%u", port_numbers[i]); } n += snprintf(&str[n], sizeof(":000.000"), ":%u.%u", (uint8_t)config_number, (uint8_t)interface_number); str[n] = '\0'; } else { /* Likely impossible, but check: USB3.0 specs limit number of ports to 7 and buffer size here is 8 */ if (num_ports == LIBUSB_ERROR_OVERFLOW) { LOG("make_path() failed. buffer overflow error\n"); } else { LOG("make_path() failed. unknown error\n"); } str[0] = '\0'; } } static char *make_path(libusb_device *dev, int config_number, int interface_number) { char str[64]; get_path(&str, dev, config_number, interface_number); return strdup(str); } HID_API_EXPORT const struct hid_api_version* HID_API_CALL hid_version(void) { return &api_version; } HID_API_EXPORT const char* HID_API_CALL hid_version_str(void) { return HID_API_VERSION_STR; } int HID_API_EXPORT hid_init(void) { if (!usb_context) { const char *locale; /* Init Libusb */ if (libusb_init(&usb_context)) return -1; /* Set the locale if it's not set. */ locale = setlocale(LC_CTYPE, NULL); if (!locale) setlocale(LC_CTYPE, ""); } return 0; } int HID_API_EXPORT hid_exit(void) { if (usb_context) { libusb_exit(usb_context); usb_context = NULL; } return 0; } static int hid_get_report_descriptor_libusb(libusb_device_handle *handle, int interface_num, uint16_t expected_report_descriptor_size, unsigned char *buf, size_t buf_size) { unsigned char tmp[HID_API_MAX_REPORT_DESCRIPTOR_SIZE]; if (expected_report_descriptor_size > HID_API_MAX_REPORT_DESCRIPTOR_SIZE) expected_report_descriptor_size = HID_API_MAX_REPORT_DESCRIPTOR_SIZE; /* Get the HID Report Descriptor. See USB HID Specification, section 7.1.1 */ int res = libusb_control_transfer(handle, LIBUSB_ENDPOINT_IN|LIBUSB_RECIPIENT_INTERFACE, LIBUSB_REQUEST_GET_DESCRIPTOR, (LIBUSB_DT_REPORT << 8), interface_num, tmp, expected_report_descriptor_size, 5000); if (res < 0) { LOG("libusb_control_transfer() for getting the HID Report descriptor failed with %d: %s\n", res, libusb_error_name(res)); return -1; } if (res > (int)buf_size) res = (int)buf_size; memcpy(buf, tmp, (size_t)res); return res; } /** * Requires an opened device with *claimed interface*. */ static void fill_device_info_usage(struct hid_device_info *cur_dev, libusb_device_handle *handle, int interface_num, uint16_t expected_report_descriptor_size) { unsigned char hid_report_descriptor[HID_API_MAX_REPORT_DESCRIPTOR_SIZE]; unsigned short page = 0, usage = 0; int res = hid_get_report_descriptor_libusb(handle, interface_num, expected_report_descriptor_size, hid_report_descriptor, sizeof(hid_report_descriptor)); if (res >= 0) { /* Parse the usage and usage page out of the report descriptor. */ get_usage(hid_report_descriptor, res, &page, &usage); } cur_dev->usage_page = page; cur_dev->usage = usage; } #ifdef INVASIVE_GET_USAGE static void invasive_fill_device_info_usage(struct hid_device_info *cur_dev, libusb_device_handle *handle, int interface_num, uint16_t report_descriptor_size) { int res = 0; #ifdef DETACH_KERNEL_DRIVER int detached = 0; /* Usage Page and Usage */ res = libusb_kernel_driver_active(handle, interface_num); if (res == 1) { res = libusb_detach_kernel_driver(handle, interface_num); if (res < 0) LOG("Couldn't detach kernel driver, even though a kernel driver was attached.\n"); else detached = 1; } #endif res = libusb_claim_interface(handle, interface_num); if (res >= 0) { fill_device_info_usage(cur_dev, handle, interface_num, report_descriptor_size); /* Release the interface */ res = libusb_release_interface(handle, interface_num); if (res < 0) LOG("Can't release the interface.\n"); } else LOG("Can't claim interface: (%d) %s\n", res, libusb_error_name(res)); #ifdef DETACH_KERNEL_DRIVER /* Re-attach kernel driver if necessary. */ if (detached) { res = libusb_attach_kernel_driver(handle, interface_num); if (res < 0) LOG("Couldn't re-attach kernel driver.\n"); } #endif } #endif /* INVASIVE_GET_USAGE */ /** * Create and fill up most of hid_device_info fields. * usage_page/usage is not filled up. */ static struct hid_device_info * create_device_info_for_device(libusb_device *device, libusb_device_handle *handle, struct libusb_device_descriptor *desc, int config_number, int interface_num) { struct hid_device_info *cur_dev = calloc(1, sizeof(struct hid_device_info)); if (cur_dev == NULL) { return NULL; } /* VID/PID */ cur_dev->vendor_id = desc->idVendor; cur_dev->product_id = desc->idProduct; cur_dev->release_number = desc->bcdDevice; cur_dev->interface_number = interface_num; cur_dev->bus_type = HID_API_BUS_USB; cur_dev->path = make_path(device, config_number, interface_num); if (!handle) { return cur_dev; } if (desc->iSerialNumber > 0) cur_dev->serial_number = get_usb_string(handle, desc->iSerialNumber); /* Manufacturer and Product strings */ if (desc->iManufacturer > 0) cur_dev->manufacturer_string = get_usb_string(handle, desc->iManufacturer); if (desc->iProduct > 0) cur_dev->product_string = get_usb_string(handle, desc->iProduct); return cur_dev; } static uint16_t get_report_descriptor_size_from_interface_descriptors(const struct libusb_interface_descriptor *intf_desc) { int i = 0; int found_hid_report_descriptor = 0; uint16_t result = HID_API_MAX_REPORT_DESCRIPTOR_SIZE; const unsigned char *extra = intf_desc->extra; int extra_length = intf_desc->extra_length; /* "extra" contains a HID descriptor See section 6.2.1 of HID 1.1 specification. */ while (extra_length >= 2) { /* Descriptor header: bLength/bDescriptorType */ if (extra[1] == LIBUSB_DT_HID) { /* bDescriptorType */ if (extra_length < 6) { LOG("Broken HID descriptor: not enough data\n"); break; } unsigned char bNumDescriptors = extra[5]; if (extra_length < (6 + 3 * bNumDescriptors)) { LOG("Broken HID descriptor: not enough data for Report metadata\n"); break; } for (i = 0; i < bNumDescriptors; i++) { if (extra[6 + 3 * i] == LIBUSB_DT_REPORT) { result = (uint16_t)extra[6 + 3 * i + 2] << 8 | extra[6 + 3 * i + 1]; found_hid_report_descriptor = 1; break; } } if (!found_hid_report_descriptor) { /* We expect to find exactly 1 HID descriptor (LIBUSB_DT_HID) which should contain exactly one HID Report Descriptor metadata (LIBUSB_DT_REPORT). */ LOG("Broken HID descriptor: missing Report descriptor\n"); } break; } if (extra[0] == 0) { /* bLength */ LOG("Broken HID Interface descriptors: zero-sized descriptor\n"); break; } /* Iterate over to the next Descriptor */ extra_length -= extra[0]; extra += extra[0]; } return result; } struct hid_device_info HID_API_EXPORT *hid_enumerate(unsigned short vendor_id, unsigned short product_id) { libusb_device **devs; libusb_device *dev; libusb_device_handle *handle = NULL; ssize_t num_devs; int i = 0; struct hid_device_info *root = NULL; /* return object */ struct hid_device_info *cur_dev = NULL; if(hid_init() < 0) return NULL; num_devs = libusb_get_device_list(usb_context, &devs); if (num_devs < 0) return NULL; while ((dev = devs[i++]) != NULL) { struct libusb_device_descriptor desc; struct libusb_config_descriptor *conf_desc = NULL; int j, k; int res = libusb_get_device_descriptor(dev, &desc); if (res < 0) continue; unsigned short dev_vid = desc.idVendor; unsigned short dev_pid = desc.idProduct; if ((vendor_id != 0x0 && vendor_id != dev_vid) || (product_id != 0x0 && product_id != dev_pid)) { continue; } res = libusb_get_active_config_descriptor(dev, &conf_desc); if (res < 0) libusb_get_config_descriptor(dev, 0, &conf_desc); if (conf_desc) { for (j = 0; j < conf_desc->bNumInterfaces; j++) { const struct libusb_interface *intf = &conf_desc->interface[j]; for (k = 0; k < intf->num_altsetting; k++) { const struct libusb_interface_descriptor *intf_desc; intf_desc = &intf->altsetting[k]; if (intf_desc->bInterfaceClass == LIBUSB_CLASS_HID) { struct hid_device_info *tmp; res = libusb_open(dev, &handle); #ifdef __ANDROID__ if (handle) { /* There is (a potential) libusb Android backend, in which device descriptor is not accurate up until the device is opened. https://github.com/libusb/libusb/pull/874#discussion_r632801373 A workaround is to re-read the descriptor again. Even if it is not going to be accepted into libusb master, having it here won't do any harm, since reading the device descriptor is as cheap as copy 18 bytes of data. */ libusb_get_device_descriptor(dev, &desc); } #endif tmp = create_device_info_for_device(dev, handle, &desc, conf_desc->bConfigurationValue, intf_desc->bInterfaceNumber); if (tmp) { #ifdef INVASIVE_GET_USAGE /* TODO: have a runtime check for this section. */ /* This section is removed because it is too invasive on the system. Getting a Usage Page and Usage requires parsing the HID Report descriptor. Getting a HID Report descriptor involves claiming the interface. Claiming the interface involves detaching the kernel driver. Detaching the kernel driver is hard on the system because it will unclaim interfaces (if another app has them claimed) and the re-attachment of the driver will sometimes change /dev entry names. It is for these reasons that this section is optional. For composite devices, use the interface field in the hid_device_info struct to distinguish between interfaces. */ if (handle) { uint16_t report_descriptor_size = get_report_descriptor_size_from_interface_descriptors(intf_desc); invasive_fill_device_info_usage(tmp, handle, intf_desc->bInterfaceNumber, report_descriptor_size); } #endif /* INVASIVE_GET_USAGE */ if (cur_dev) { cur_dev->next = tmp; } else { root = tmp; } cur_dev = tmp; } if (res >= 0) { libusb_close(handle); handle = NULL; } } } /* altsettings */ } /* interfaces */ libusb_free_config_descriptor(conf_desc); } } libusb_free_device_list(devs, 1); return root; } void HID_API_EXPORT hid_free_enumeration(struct hid_device_info *devs) { struct hid_device_info *d = devs; while (d) { struct hid_device_info *next = d->next; free(d->path); free(d->serial_number); free(d->manufacturer_string); free(d->product_string); free(d); d = next; } } hid_device * hid_open(unsigned short vendor_id, unsigned short product_id, const wchar_t *serial_number) { struct hid_device_info *devs, *cur_dev; const char *path_to_open = NULL; hid_device *handle = NULL; devs = hid_enumerate(vendor_id, product_id); cur_dev = devs; while (cur_dev) { if (cur_dev->vendor_id == vendor_id && cur_dev->product_id == product_id) { if (serial_number) { if (cur_dev->serial_number && wcscmp(serial_number, cur_dev->serial_number) == 0) { path_to_open = cur_dev->path; break; } } else { path_to_open = cur_dev->path; break; } } cur_dev = cur_dev->next; } if (path_to_open) { /* Open the device */ handle = hid_open_path(path_to_open); } hid_free_enumeration(devs); return handle; } static void LIBUSB_CALL read_callback(struct libusb_transfer *transfer) { hid_device *dev = transfer->user_data; int res; if (transfer->status == LIBUSB_TRANSFER_COMPLETED) { struct input_report *rpt = (struct input_report*) malloc(sizeof(*rpt)); rpt->data = (uint8_t*) malloc(transfer->actual_length); memcpy(rpt->data, transfer->buffer, transfer->actual_length); rpt->len = transfer->actual_length; rpt->next = NULL; hidapi_thread_mutex_lock(&dev->thread_state); /* Attach the new report object to the end of the list. */ if (dev->input_reports == NULL) { /* The list is empty. Put it at the root. */ dev->input_reports = rpt; hidapi_thread_cond_signal(&dev->thread_state); } else { /* Find the end of the list and attach. */ struct input_report *cur = dev->input_reports; int num_queued = 0; while (cur->next != NULL) { cur = cur->next; num_queued++; } cur->next = rpt; /* Pop one off if we've reached 30 in the queue. This way we don't grow forever if the user never reads anything from the device. */ if (num_queued > 30) { return_data(dev, NULL, 0); } } hidapi_thread_mutex_unlock(&dev->thread_state); } else if (transfer->status == LIBUSB_TRANSFER_CANCELLED) { dev->shutdown_thread = 1; } else if (transfer->status == LIBUSB_TRANSFER_NO_DEVICE) { dev->shutdown_thread = 1; } else if (transfer->status == LIBUSB_TRANSFER_TIMED_OUT) { //LOG("Timeout (normal)\n"); } else { LOG("Unknown transfer code: %d\n", transfer->status); } if (dev->shutdown_thread) { dev->transfer_loop_finished = 1; return; } /* Re-submit the transfer object. */ res = libusb_submit_transfer(transfer); if (res != 0) { LOG("Unable to submit URB: (%d) %s\n", res, libusb_error_name(res)); dev->shutdown_thread = 1; dev->transfer_loop_finished = 1; } } static void *read_thread(void *param) { int res; hid_device *dev = param; uint8_t *buf; const size_t length = dev->input_ep_max_packet_size; /* Set up the transfer object. */ buf = (uint8_t*) malloc(length); dev->transfer = libusb_alloc_transfer(0); libusb_fill_interrupt_transfer(dev->transfer, dev->device_handle, dev->input_endpoint, buf, length, read_callback, dev, 5000/*timeout*/); /* Make the first submission. Further submissions are made from inside read_callback() */ res = libusb_submit_transfer(dev->transfer); if(res < 0) { LOG("libusb_submit_transfer failed: %d %s. Stopping read_thread from running\n", res, libusb_error_name(res)); dev->shutdown_thread = 1; dev->transfer_loop_finished = 1; } /* Notify the main thread that the read thread is up and running. */ hidapi_thread_barrier_wait(&dev->thread_state); /* Handle all the events. */ while (!dev->shutdown_thread) { res = libusb_handle_events(usb_context); if (res < 0) { /* There was an error. */ LOG("read_thread(): (%d) %s\n", res, libusb_error_name(res)); /* Break out of this loop only on fatal error.*/ if (res != LIBUSB_ERROR_BUSY && res != LIBUSB_ERROR_TIMEOUT && res != LIBUSB_ERROR_OVERFLOW && res != LIBUSB_ERROR_INTERRUPTED) { dev->shutdown_thread = 1; break; } } } /* Cancel any transfer that may be pending. This call will fail if no transfers are pending, but that's OK. */ libusb_cancel_transfer(dev->transfer); while (!dev->transfer_loop_finished) libusb_handle_events_completed(usb_context, &dev->transfer_loop_finished); /* Now that the read thread is stopping, Wake any threads which are waiting on data (in hid_read_timeout()). Do this under a mutex to make sure that a thread which is about to go to sleep waiting on the condition actually will go to sleep before the condition is signaled. */ hidapi_thread_mutex_lock(&dev->thread_state); hidapi_thread_cond_broadcast(&dev->thread_state); hidapi_thread_mutex_unlock(&dev->thread_state); /* The dev->transfer->buffer and dev->transfer objects are cleaned up in hid_close(). They are not cleaned up here because this thread could end either due to a disconnect or due to a user call to hid_close(). In both cases the objects can be safely cleaned up after the call to hidapi_thread_join() (in hid_close()), but since hid_close() calls libusb_cancel_transfer(), on these objects, they can not be cleaned up here. */ return NULL; } static int hidapi_initialize_device(hid_device *dev, int config_number, const struct libusb_interface_descriptor *intf_desc) { int i =0; int res = 0; struct libusb_device_descriptor desc; libusb_get_device_descriptor(libusb_get_device(dev->device_handle), &desc); #ifdef DETACH_KERNEL_DRIVER /* Detach the kernel driver, but only if the device is managed by the kernel */ dev->is_driver_detached = 0; if (libusb_kernel_driver_active(dev->device_handle, intf_desc->bInterfaceNumber) == 1) { res = libusb_detach_kernel_driver(dev->device_handle, intf_desc->bInterfaceNumber); if (res < 0) { LOG("Unable to detach Kernel Driver: (%d) %s\n", res, libusb_error_name(res)); return 0; } else { dev->is_driver_detached = 1; LOG("Driver successfully detached from kernel.\n"); } } #endif res = libusb_claim_interface(dev->device_handle, intf_desc->bInterfaceNumber); if (res < 0) { LOG("can't claim interface %d: (%d) %s\n", intf_desc->bInterfaceNumber, res, libusb_error_name(res)); #ifdef DETACH_KERNEL_DRIVER if (dev->is_driver_detached) { res = libusb_attach_kernel_driver(dev->device_handle, intf_desc->bInterfaceNumber); if (res < 0) LOG("Failed to reattach the driver to kernel: (%d) %s\n", res, libusb_error_name(res)); } #endif return 0; } /* Store off the string descriptor indexes */ dev->manufacturer_index = desc.iManufacturer; dev->product_index = desc.iProduct; dev->serial_index = desc.iSerialNumber; /* Store off the USB information */ dev->config_number = config_number; dev->interface = intf_desc->bInterfaceNumber; dev->report_descriptor_size = get_report_descriptor_size_from_interface_descriptors(intf_desc); dev->input_endpoint = 0; dev->input_ep_max_packet_size = 0; dev->output_endpoint = 0; /* Find the INPUT and OUTPUT endpoints. An OUTPUT endpoint is not required. */ for (i = 0; i < intf_desc->bNumEndpoints; i++) { const struct libusb_endpoint_descriptor *ep = &intf_desc->endpoint[i]; /* Determine the type and direction of this endpoint. */ int is_interrupt = (ep->bmAttributes & LIBUSB_TRANSFER_TYPE_MASK) == LIBUSB_TRANSFER_TYPE_INTERRUPT; int is_output = (ep->bEndpointAddress & LIBUSB_ENDPOINT_DIR_MASK) == LIBUSB_ENDPOINT_OUT; int is_input = (ep->bEndpointAddress & LIBUSB_ENDPOINT_DIR_MASK) == LIBUSB_ENDPOINT_IN; /* Decide whether to use it for input or output. */ if (dev->input_endpoint == 0 && is_interrupt && is_input) { /* Use this endpoint for INPUT */ dev->input_endpoint = ep->bEndpointAddress; dev->input_ep_max_packet_size = ep->wMaxPacketSize; } if (dev->output_endpoint == 0 && is_interrupt && is_output) { /* Use this endpoint for OUTPUT */ dev->output_endpoint = ep->bEndpointAddress; } } hidapi_thread_create(&dev->thread_state, read_thread, dev); /* Wait here for the read thread to be initialized. */ hidapi_thread_barrier_wait(&dev->thread_state); return 1; } hid_device * HID_API_EXPORT hid_open_path(const char *path) { hid_device *dev = NULL; libusb_device **devs = NULL; libusb_device *usb_dev = NULL; int res = 0; int d = 0; int good_open = 0; if(hid_init() < 0) return NULL; dev = new_hid_device(); libusb_get_device_list(usb_context, &devs); while ((usb_dev = devs[d++]) != NULL && !good_open) { struct libusb_device_descriptor desc; struct libusb_config_descriptor *conf_desc = NULL; int j,k; res = libusb_get_device_descriptor(usb_dev, &desc); if (res < 0) continue; res = libusb_get_active_config_descriptor(usb_dev, &conf_desc); if (res < 0) libusb_get_config_descriptor(usb_dev, 0, &conf_desc); if (!conf_desc) continue; for (j = 0; j < conf_desc->bNumInterfaces && !good_open; j++) { const struct libusb_interface *intf = &conf_desc->interface[j]; for (k = 0; k < intf->num_altsetting && !good_open; k++) { const struct libusb_interface_descriptor *intf_desc = &intf->altsetting[k]; if (intf_desc->bInterfaceClass == LIBUSB_CLASS_HID) { char dev_path[64]; get_path(&dev_path, usb_dev, conf_desc->bConfigurationValue, intf_desc->bInterfaceNumber); if (!strcmp(dev_path, path)) { /* Matched Paths. Open this device */ /* OPEN HERE */ res = libusb_open(usb_dev, &dev->device_handle); if (res < 0) { LOG("can't open device\n"); break; } good_open = hidapi_initialize_device(dev, conf_desc->bConfigurationValue, intf_desc); if (!good_open) libusb_close(dev->device_handle); } } } } libusb_free_config_descriptor(conf_desc); } libusb_free_device_list(devs, 1); /* If we have a good handle, return it. */ if (good_open) { return dev; } else { /* Unable to open any devices. */ free_hid_device(dev); return NULL; } } HID_API_EXPORT hid_device * HID_API_CALL hid_libusb_wrap_sys_device(intptr_t sys_dev, int interface_num) { /* 0x01000107 is a LIBUSB_API_VERSION for 1.0.23 - version when libusb_wrap_sys_device was introduced */ #if (!defined(HIDAPI_TARGET_LIBUSB_API_VERSION) || HIDAPI_TARGET_LIBUSB_API_VERSION >= 0x01000107) && (LIBUSB_API_VERSION >= 0x01000107) hid_device *dev = NULL; struct libusb_config_descriptor *conf_desc = NULL; const struct libusb_interface_descriptor *selected_intf_desc = NULL; int res = 0; int j = 0, k = 0; if(hid_init() < 0) return NULL; dev = new_hid_device(); res = libusb_wrap_sys_device(usb_context, sys_dev, &dev->device_handle); if (res < 0) { LOG("libusb_wrap_sys_device failed: %d %s\n", res, libusb_error_name(res)); goto err; } res = libusb_get_active_config_descriptor(libusb_get_device(dev->device_handle), &conf_desc); if (res < 0) libusb_get_config_descriptor(libusb_get_device(dev->device_handle), 0, &conf_desc); if (!conf_desc) { LOG("Failed to get configuration descriptor: %d %s\n", res, libusb_error_name(res)); goto err; } /* find matching HID interface */ for (j = 0; j < conf_desc->bNumInterfaces && !selected_intf_desc; j++) { const struct libusb_interface *intf = &conf_desc->interface[j]; for (k = 0; k < intf->num_altsetting; k++) { const struct libusb_interface_descriptor *intf_desc = &intf->altsetting[k]; if (intf_desc->bInterfaceClass == LIBUSB_CLASS_HID) { if (interface_num < 0 || interface_num == intf_desc->bInterfaceNumber) { selected_intf_desc = intf_desc; break; } } } } if (!selected_intf_desc) { if (interface_num < 0) { LOG("Sys USB device doesn't contain a HID interface\n"); } else { LOG("Sys USB device doesn't contain a HID interface with number %d\n", interface_num); } goto err; } if (!hidapi_initialize_device(dev, conf_desc->bConfigurationValue, selected_intf_desc)) goto err; return dev; err: if (conf_desc) libusb_free_config_descriptor(conf_desc); if (dev->device_handle) libusb_close(dev->device_handle); free_hid_device(dev); #else (void)sys_dev; (void)interface_num; LOG("libusb_wrap_sys_device is not available\n"); #endif return NULL; } int HID_API_EXPORT hid_write(hid_device *dev, const unsigned char *data, size_t length) { int res; int report_number; int skipped_report_id = 0; if (!data || (length ==0)) { return -1; } report_number = data[0]; if (report_number == 0x0) { data++; length--; skipped_report_id = 1; } if (dev->output_endpoint <= 0) { /* No interrupt out endpoint. Use the Control Endpoint */ res = libusb_control_transfer(dev->device_handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x09/*HID Set_Report*/, (2/*HID output*/ << 8) | report_number, dev->interface, (unsigned char *)data, length, 1000/*timeout millis*/); if (res < 0) return -1; if (skipped_report_id) length++; return length; } else { /* Use the interrupt out endpoint */ int actual_length; res = libusb_interrupt_transfer(dev->device_handle, dev->output_endpoint, (unsigned char*)data, length, &actual_length, 1000); if (res < 0) return -1; if (skipped_report_id) actual_length++; return actual_length; } } /* Helper function, to simplify hid_read(). This should be called with dev->mutex locked. */ static int return_data(hid_device *dev, unsigned char *data, size_t length) { /* Copy the data out of the linked list item (rpt) into the return buffer (data), and delete the liked list item. */ struct input_report *rpt = dev->input_reports; size_t len = (length < rpt->len)? length: rpt->len; if (len > 0) memcpy(data, rpt->data, len); dev->input_reports = rpt->next; free(rpt->data); free(rpt); return len; } static void cleanup_mutex(void *param) { hid_device *dev = param; hidapi_thread_mutex_unlock(&dev->thread_state); } int HID_API_EXPORT hid_read_timeout(hid_device *dev, unsigned char *data, size_t length, int milliseconds) { #if 0 int transferred; int res = libusb_interrupt_transfer(dev->device_handle, dev->input_endpoint, data, length, &transferred, 5000); LOG("transferred: %d\n", transferred); return transferred; #endif /* by initialising this variable right here, GCC gives a compilation warning/error: */ /* error: variable ‘bytes_read’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered] */ int bytes_read; /* = -1; */ hidapi_thread_mutex_lock(&dev->thread_state); hidapi_thread_cleanup_push(cleanup_mutex, dev); bytes_read = -1; /* There's an input report queued up. Return it. */ if (dev->input_reports) { /* Return the first one */ bytes_read = return_data(dev, data, length); goto ret; } if (dev->shutdown_thread) { /* This means the device has been disconnected. An error code of -1 should be returned. */ bytes_read = -1; goto ret; } if (milliseconds == -1) { /* Blocking */ while (!dev->input_reports && !dev->shutdown_thread) { hidapi_thread_cond_wait(&dev->thread_state); } if (dev->input_reports) { bytes_read = return_data(dev, data, length); } } else if (milliseconds > 0) { /* Non-blocking, but called with timeout. */ int res; hidapi_timespec ts; hidapi_thread_gettime(&ts); hidapi_thread_addtime(&ts, milliseconds); while (!dev->input_reports && !dev->shutdown_thread) { res = hidapi_thread_cond_timedwait(&dev->thread_state, &ts); if (res == 0) { if (dev->input_reports) { bytes_read = return_data(dev, data, length); break; } /* If we're here, there was a spurious wake up or the read thread was shutdown. Run the loop again (ie: don't break). */ } else if (res == HIDAPI_THREAD_TIMED_OUT) { /* Timed out. */ bytes_read = 0; break; } else { /* Error. */ bytes_read = -1; break; } } } else { /* Purely non-blocking */ bytes_read = 0; } ret: hidapi_thread_mutex_unlock(&dev->thread_state); hidapi_thread_cleanup_pop(0); return bytes_read; } int HID_API_EXPORT hid_read(hid_device *dev, unsigned char *data, size_t length) { return hid_read_timeout(dev, data, length, dev->blocking ? -1 : 0); } int HID_API_EXPORT hid_set_nonblocking(hid_device *dev, int nonblock) { dev->blocking = !nonblock; return 0; } int HID_API_EXPORT hid_send_feature_report(hid_device *dev, const unsigned char *data, size_t length) { int res = -1; int skipped_report_id = 0; int report_number = data[0]; if (report_number == 0x0) { data++; length--; skipped_report_id = 1; } res = libusb_control_transfer(dev->device_handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_OUT, 0x09/*HID set_report*/, (3/*HID feature*/ << 8) | report_number, dev->interface, (unsigned char *)data, length, 1000/*timeout millis*/); if (res < 0) return -1; /* Account for the report ID */ if (skipped_report_id) length++; return length; } int HID_API_EXPORT hid_get_feature_report(hid_device *dev, unsigned char *data, size_t length) { int res = -1; int skipped_report_id = 0; int report_number = data[0]; if (report_number == 0x0) { /* Offset the return buffer by 1, so that the report ID will remain in byte 0. */ data++; length--; skipped_report_id = 1; } res = libusb_control_transfer(dev->device_handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_IN, 0x01/*HID get_report*/, (3/*HID feature*/ << 8) | report_number, dev->interface, (unsigned char *)data, length, 1000/*timeout millis*/); if (res < 0) return -1; if (skipped_report_id) res++; return res; } int HID_API_EXPORT HID_API_CALL hid_get_input_report(hid_device *dev, unsigned char *data, size_t length) { int res = -1; int skipped_report_id = 0; int report_number = data[0]; if (report_number == 0x0) { /* Offset the return buffer by 1, so that the report ID will remain in byte 0. */ data++; length--; skipped_report_id = 1; } res = libusb_control_transfer(dev->device_handle, LIBUSB_REQUEST_TYPE_CLASS|LIBUSB_RECIPIENT_INTERFACE|LIBUSB_ENDPOINT_IN, 0x01/*HID get_report*/, (1/*HID Input*/ << 8) | report_number, dev->interface, (unsigned char *)data, length, 1000/*timeout millis*/); if (res < 0) return -1; if (skipped_report_id) res++; return res; } void HID_API_EXPORT hid_close(hid_device *dev) { if (!dev) return; /* Cause read_thread() to stop. */ dev->shutdown_thread = 1; libusb_cancel_transfer(dev->transfer); /* Wait for read_thread() to end. */ hidapi_thread_join(&dev->thread_state); /* Clean up the Transfer objects allocated in read_thread(). */ free(dev->transfer->buffer); dev->transfer->buffer = NULL; libusb_free_transfer(dev->transfer); /* release the interface */ libusb_release_interface(dev->device_handle, dev->interface); /* reattach the kernel driver if it was detached */ #ifdef DETACH_KERNEL_DRIVER if (dev->is_driver_detached) { int res = libusb_attach_kernel_driver(dev->device_handle, dev->interface); if (res < 0) LOG("Failed to reattach the driver to kernel.\n"); } #endif /* Close the handle */ libusb_close(dev->device_handle); /* Clear out the queue of received reports. */ hidapi_thread_mutex_lock(&dev->thread_state); while (dev->input_reports) { return_data(dev, NULL, 0); } hidapi_thread_mutex_unlock(&dev->thread_state); free_hid_device(dev); } int HID_API_EXPORT_CALL hid_get_manufacturer_string(hid_device *dev, wchar_t *string, size_t maxlen) { return hid_get_indexed_string(dev, dev->manufacturer_index, string, maxlen); } int HID_API_EXPORT_CALL hid_get_product_string(hid_device *dev, wchar_t *string, size_t maxlen) { return hid_get_indexed_string(dev, dev->product_index, string, maxlen); } int HID_API_EXPORT_CALL hid_get_serial_number_string(hid_device *dev, wchar_t *string, size_t maxlen) { return hid_get_indexed_string(dev, dev->serial_index, string, maxlen); } HID_API_EXPORT struct hid_device_info *HID_API_CALL hid_get_device_info(hid_device *dev) { if (!dev->device_info) { struct libusb_device_descriptor desc; libusb_device *usb_device = libusb_get_device(dev->device_handle); libusb_get_device_descriptor(usb_device, &desc); dev->device_info = create_device_info_for_device(usb_device, dev->device_handle, &desc, dev->config_number, dev->interface); // device error already set by create_device_info_for_device, if any if (dev->device_info) { fill_device_info_usage(dev->device_info, dev->device_handle, dev->interface, dev->report_descriptor_size); } } return dev->device_info; } int HID_API_EXPORT_CALL hid_get_indexed_string(hid_device *dev, int string_index, wchar_t *string, size_t maxlen) { wchar_t *str; str = get_usb_string(dev->device_handle, string_index); if (str) { wcsncpy(string, str, maxlen); string[maxlen-1] = L'\0'; free(str); return 0; } else return -1; } int HID_API_EXPORT_CALL hid_get_report_descriptor(hid_device *dev, unsigned char *buf, size_t buf_size) { return hid_get_report_descriptor_libusb(dev->device_handle, dev->interface, dev->report_descriptor_size, buf, buf_size); } HID_API_EXPORT const wchar_t * HID_API_CALL hid_error(hid_device *dev) { (void)dev; return L"hid_error is not implemented yet"; } struct lang_map_entry { const char *name; const char *string_code; uint16_t usb_code; }; #define LANG(name,code,usb_code) { name, code, usb_code } static struct lang_map_entry lang_map[] = { LANG("Afrikaans", "af", 0x0436), LANG("Albanian", "sq", 0x041C), LANG("Arabic - United Arab Emirates", "ar_ae", 0x3801), LANG("Arabic - Bahrain", "ar_bh", 0x3C01), LANG("Arabic - Algeria", "ar_dz", 0x1401), LANG("Arabic - Egypt", "ar_eg", 0x0C01), LANG("Arabic - Iraq", "ar_iq", 0x0801), LANG("Arabic - Jordan", "ar_jo", 0x2C01), LANG("Arabic - Kuwait", "ar_kw", 0x3401), LANG("Arabic - Lebanon", "ar_lb", 0x3001), LANG("Arabic - Libya", "ar_ly", 0x1001), LANG("Arabic - Morocco", "ar_ma", 0x1801), LANG("Arabic - Oman", "ar_om", 0x2001), LANG("Arabic - Qatar", "ar_qa", 0x4001), LANG("Arabic - Saudi Arabia", "ar_sa", 0x0401), LANG("Arabic - Syria", "ar_sy", 0x2801), LANG("Arabic - Tunisia", "ar_tn", 0x1C01), LANG("Arabic - Yemen", "ar_ye", 0x2401), LANG("Armenian", "hy", 0x042B), LANG("Azeri - Latin", "az_az", 0x042C), LANG("Azeri - Cyrillic", "az_az", 0x082C), LANG("Basque", "eu", 0x042D), LANG("Belarusian", "be", 0x0423), LANG("Bulgarian", "bg", 0x0402), LANG("Catalan", "ca", 0x0403), LANG("Chinese - China", "zh_cn", 0x0804), LANG("Chinese - Hong Kong SAR", "zh_hk", 0x0C04), LANG("Chinese - Macau SAR", "zh_mo", 0x1404), LANG("Chinese - Singapore", "zh_sg", 0x1004), LANG("Chinese - Taiwan", "zh_tw", 0x0404), LANG("Croatian", "hr", 0x041A), LANG("Czech", "cs", 0x0405), LANG("Danish", "da", 0x0406), LANG("Dutch - Netherlands", "nl_nl", 0x0413), LANG("Dutch - Belgium", "nl_be", 0x0813), LANG("English - Australia", "en_au", 0x0C09), LANG("English - Belize", "en_bz", 0x2809), LANG("English - Canada", "en_ca", 0x1009), LANG("English - Caribbean", "en_cb", 0x2409), LANG("English - Ireland", "en_ie", 0x1809), LANG("English - Jamaica", "en_jm", 0x2009), LANG("English - New Zealand", "en_nz", 0x1409), LANG("English - Philippines", "en_ph", 0x3409), LANG("English - Southern Africa", "en_za", 0x1C09), LANG("English - Trinidad", "en_tt", 0x2C09), LANG("English - Great Britain", "en_gb", 0x0809), LANG("English - United States", "en_us", 0x0409), LANG("Estonian", "et", 0x0425), LANG("Farsi", "fa", 0x0429), LANG("Finnish", "fi", 0x040B), LANG("Faroese", "fo", 0x0438), LANG("French - France", "fr_fr", 0x040C), LANG("French - Belgium", "fr_be", 0x080C), LANG("French - Canada", "fr_ca", 0x0C0C), LANG("French - Luxembourg", "fr_lu", 0x140C), LANG("French - Switzerland", "fr_ch", 0x100C), LANG("Gaelic - Ireland", "gd_ie", 0x083C), LANG("Gaelic - Scotland", "gd", 0x043C), LANG("German - Germany", "de_de", 0x0407), LANG("German - Austria", "de_at", 0x0C07), LANG("German - Liechtenstein", "de_li", 0x1407), LANG("German - Luxembourg", "de_lu", 0x1007), LANG("German - Switzerland", "de_ch", 0x0807), LANG("Greek", "el", 0x0408), LANG("Hebrew", "he", 0x040D), LANG("Hindi", "hi", 0x0439), LANG("Hungarian", "hu", 0x040E), LANG("Icelandic", "is", 0x040F), LANG("Indonesian", "id", 0x0421), LANG("Italian - Italy", "it_it", 0x0410), LANG("Italian - Switzerland", "it_ch", 0x0810), LANG("Japanese", "ja", 0x0411), LANG("Korean", "ko", 0x0412), LANG("Latvian", "lv", 0x0426), LANG("Lithuanian", "lt", 0x0427), LANG("F.Y.R.O. Macedonia", "mk", 0x042F), LANG("Malay - Malaysia", "ms_my", 0x043E), LANG("Malay – Brunei", "ms_bn", 0x083E), LANG("Maltese", "mt", 0x043A), LANG("Marathi", "mr", 0x044E), LANG("Norwegian - Bokml", "no_no", 0x0414), LANG("Norwegian - Nynorsk", "no_no", 0x0814), LANG("Polish", "pl", 0x0415), LANG("Portuguese - Portugal", "pt_pt", 0x0816), LANG("Portuguese - Brazil", "pt_br", 0x0416), LANG("Raeto-Romance", "rm", 0x0417), LANG("Romanian - Romania", "ro", 0x0418), LANG("Romanian - Republic of Moldova", "ro_mo", 0x0818), LANG("Russian", "ru", 0x0419), LANG("Russian - Republic of Moldova", "ru_mo", 0x0819), LANG("Sanskrit", "sa", 0x044F), LANG("Serbian - Cyrillic", "sr_sp", 0x0C1A), LANG("Serbian - Latin", "sr_sp", 0x081A), LANG("Setsuana", "tn", 0x0432), LANG("Slovenian", "sl", 0x0424), LANG("Slovak", "sk", 0x041B), LANG("Sorbian", "sb", 0x042E), LANG("Spanish - Spain (Traditional)", "es_es", 0x040A), LANG("Spanish - Argentina", "es_ar", 0x2C0A), LANG("Spanish - Bolivia", "es_bo", 0x400A), LANG("Spanish - Chile", "es_cl", 0x340A), LANG("Spanish - Colombia", "es_co", 0x240A), LANG("Spanish - Costa Rica", "es_cr", 0x140A), LANG("Spanish - Dominican Republic", "es_do", 0x1C0A), LANG("Spanish - Ecuador", "es_ec", 0x300A), LANG("Spanish - Guatemala", "es_gt", 0x100A), LANG("Spanish - Honduras", "es_hn", 0x480A), LANG("Spanish - Mexico", "es_mx", 0x080A), LANG("Spanish - Nicaragua", "es_ni", 0x4C0A), LANG("Spanish - Panama", "es_pa", 0x180A), LANG("Spanish - Peru", "es_pe", 0x280A), LANG("Spanish - Puerto Rico", "es_pr", 0x500A), LANG("Spanish - Paraguay", "es_py", 0x3C0A), LANG("Spanish - El Salvador", "es_sv", 0x440A), LANG("Spanish - Uruguay", "es_uy", 0x380A), LANG("Spanish - Venezuela", "es_ve", 0x200A), LANG("Southern Sotho", "st", 0x0430), LANG("Swahili", "sw", 0x0441), LANG("Swedish - Sweden", "sv_se", 0x041D), LANG("Swedish - Finland", "sv_fi", 0x081D), LANG("Tamil", "ta", 0x0449), LANG("Tatar", "tt", 0X0444), LANG("Thai", "th", 0x041E), LANG("Turkish", "tr", 0x041F), LANG("Tsonga", "ts", 0x0431), LANG("Ukrainian", "uk", 0x0422), LANG("Urdu", "ur", 0x0420), LANG("Uzbek - Cyrillic", "uz_uz", 0x0843), LANG("Uzbek – Latin", "uz_uz", 0x0443), LANG("Vietnamese", "vi", 0x042A), LANG("Xhosa", "xh", 0x0434), LANG("Yiddish", "yi", 0x043D), LANG("Zulu", "zu", 0x0435), LANG(NULL, NULL, 0x0), }; uint16_t get_usb_code_for_current_locale(void) { char *locale; char search_string[64]; char *ptr; struct lang_map_entry *lang; /* Get the current locale. */ locale = setlocale(0, NULL); if (!locale) return 0x0; /* Make a copy of the current locale string. */ strncpy(search_string, locale, sizeof(search_string)); search_string[sizeof(search_string)-1] = '\0'; /* Chop off the encoding part, and make it lower case. */ ptr = search_string; while (*ptr) { *ptr = tolower(*ptr); if (*ptr == '.') { *ptr = '\0'; break; } ptr++; } /* Find the entry which matches the string code of our locale. */ lang = lang_map; while (lang->string_code) { if (!strcmp(lang->string_code, search_string)) { return lang->usb_code; } lang++; } /* There was no match. Find with just the language only. */ /* Chop off the variant. Chop it off at the '_'. */ ptr = search_string; while (*ptr) { *ptr = tolower(*ptr); if (*ptr == '_') { *ptr = '\0'; break; } ptr++; } #if 0 /* TODO: Do we need this? */ /* Find the entry which matches the string code of our language. */ lang = lang_map; while (lang->string_code) { if (!strcmp(lang->string_code, search_string)) { return lang->usb_code; } lang++; } #endif /* Found nothing. */ return 0x0; } #ifdef __cplusplus } #endif