# ##############################################################################
# iCEstick PCF
# https://raw.githubusercontent.com/wd5gnr/icestick/master/icestick.pcf
# ##############################################################################

# Clock
set_io clk 21   # 12 MHz clock

# LEDs
set_io --warn-no-port LED1 99  # red
set_io --warn-no-port LED2 98  # red
set_io --warn-no-port LED3 97  # red
set_io --warn-no-port LED4 96  # red
set_io --warn-no-port LED5 95  # green

# IRDA interface
#set_io IRRXD 106
#set_io IRTXD 105
#set_io IRSD 107

# SPI (to configuration EEPROM)
#set_io SPI_SCK 70
#set_io SPI_SI 68
#set_io SPI_SO 67
#set_io SPI_SS 71

# J1
#set_io J1_1  3.3V
#set_io J1_2 GND
#set_io J1_3 112  # PIO0_02
#set_io J1_4 113  # PIO0_03
#set_io J1_5 114  # PIO0_04
#set_io J1_6 115  # PIO0_05
#set_io J1_7 116  # PIO0_06 PMOD pin 7
#set_io J1_8 117  # PIO0_07 PMOD pin 8
#set_io J1_9 118  # PIO0_08 PMOD pin 9
#set_io J1_10 119 # PIO0_09 PMOD pin 10

# J3
#set_io J3_1 3.3V
#set_io J3_2 GND
#set_io J3_3 62  # PIO2_17
#set_io J3_4 61  # PIO2_16
#set_io J3_5 60  # PIO2_15
#set_io J3_6 56  # PIO2_14
#set_io J3_7 48  # PIO2_13
#set_io J3_8 47  # PIO2_12
#set_io J3_9 45  # PIO2_11
#set_io J3_10 44  # PIO2_10

# PMOD
# Note: pin 5 and 11 are ground, pins 6 and 12 are Vcc
set_io --warn-no-port PMOD1 78 # PIO1_02
set_io --warn-no-port PMOD2 79 # PIO1_03
set_io --warn-no-port PMOD3 80 # PIO1_04
set_io --warn-no-port PMOD4 81 # PIO1_05
set_io --warn-no-port PMOD7 87 # PIO1_06
set_io --warn-no-port PMOD8 88 # PIO1_07
set_io --warn-no-port PMOD9 90 # PIO1_08
set_io --warn-no-port PMOD10 91 # PIO1_09

# FTDI Port B UART
set_io --warn-no-port PIO3_02 1 # PIO3_02/DP00A
set_io --warn-no-port PIO3_03 2 # PIO3_02/DP00B
#set_io DTRn 3
#set_io CTSn 4
#set_io RTSn 7
#set_io RS232_Tx 8
#set_io RS232_Rx 9

# Config pins
#set_io CDONE 65
#set_io CRESET_B 66