#[doc = "Register `thr` writer"]
pub type W = crate::W<ThrSpec>;
#[doc = "Field `thr` writer - Data to be transmitted on the serial output port (sout) in UART mode or the serial infrared output (sir_out_n) in infrared mode. Data should only be written to the THR when the THR Empty (THRE) bit (LSR\\[5\\]) is set. If in non-FIFO mode or FIFOs are disabled (FCR\\[0\\]
= 0) and THRE is set, writing a single character to the THR clears the THRE. Any additional writes to the THR before the THRE is set again causes the THR data to be overwritten. If in FIFO mode and FIFOs are enabled (FCR\\[0\\]
= 1) and THRE is set, x number of characters of data may be written to the THR before the FIFO is full. The number x (default=16) is determined by the value of FIFO Depth that you set during configuration. Any attempt to write data when the FIFO is full results in the write data being lost."]
pub type ThrW<'a, REG> = crate::FieldWriter<'a, REG, 8, u8, crate::Safe>;
impl W {
    #[doc = "Bits 0:7 - Data to be transmitted on the serial output port (sout) in UART mode or the serial infrared output (sir_out_n) in infrared mode. Data should only be written to the THR when the THR Empty (THRE) bit (LSR\\[5\\]) is set. If in non-FIFO mode or FIFOs are disabled (FCR\\[0\\]
= 0) and THRE is set, writing a single character to the THR clears the THRE. Any additional writes to the THR before the THRE is set again causes the THR data to be overwritten. If in FIFO mode and FIFOs are enabled (FCR\\[0\\]
= 1) and THRE is set, x number of characters of data may be written to the THR before the FIFO is full. The number x (default=16) is determined by the value of FIFO Depth that you set during configuration. Any attempt to write data when the FIFO is full results in the write data being lost."]
    #[inline(always)]
    #[must_use]
    pub fn thr(&mut self) -> ThrW<ThrSpec> {
        ThrW::new(self, 0)
    }
}
#[doc = "Transmit Holding Register\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`thr::W`](W). See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct ThrSpec;
impl crate::RegisterSpec for ThrSpec {
    type Ux = u32;
}
#[doc = "`write(|w| ..)` method takes [`thr::W`](W) writer structure"]
impl crate::Writable for ThrSpec {
    type Safety = crate::Unsafe;
    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
}
#[doc = "`reset()` method sets thr to value 0"]
impl crate::Resettable for ThrSpec {
    const RESET_VALUE: u32 = 0;
}