# ktrl

Crates.io

**TL;DR** **ktrl** is a **Linux keyboard programming daemon**. It aims to aid you in the never-ending quest of achieving the ultimate keybinding setup. You can dip your toes by remapping a few modifier keys (e.g `CapLock` to `Ctrl`). Or you can go all-in by creating a sophisticated layering setup with dual-function keys, tap-dancing, etc... ktrl is heavily inspired by the amazing open-source keyboard firmware project [QMK](https://docs.qmk.fm/#/). You can think of ktrl as an attempt to re-implement QMK as a Linux daemon. This is an **alpha** state project. If you find any bugs or quirks please reach out to me. **Table of Contents** - [ktrl](#ktrl) - [Intro](#intro) - [Features Overview](#features-overview) - [Layers](#layers) - [Tap-Hold (Dual Function Keys)](#tap-hold-dual-function-keys) - [Tap-Dancing (Multi-Tap)](#tap-dancing-multi-tap) - [`Meh` and `Hyper`](#meh-and-hyper) - [Audible Feedback](#audible-feedback) - [Installation](#installation) - [Configuration](#configuration) - [Primitives](#primitives) - [Input Event Codes](#input-event-codes) - [Actions](#actions) - [Effects](#effects) - [Configuration File Format](#configuration-file-format) - [Examples](#examples) - [Remapping `Ctrl` to `Capslock`](#remapping-ctrl-to-capslock) - [Home-row Modifiers](#home-row-modifiers) - [Limitations](#limitations) ## Intro ktrl sits right in the middle of the human-interface software stack. It lives in userspace, between the kernel and your display server (a.k.a X11 / Wayland). This position allows ktrl complete control over the events your keyboard generates. These events are either transparently passed-on or transformed into ktrl's "Effects" (more on that later). ## Features Overview Aside from the obvious key remapping capability, here's a taste of some of the major things you can do with ktrl - ### Layers Although "layers" might seem like a foreign idea, it's something you're already very familiar with. After all, you apply "layers" all the time by using modifier and function keys :) QMK takes this mechanism and generalizes it. Letting you design your own custom keyboard's layers! If that sounds confusing, I encourage you to head over to [QMK's documentation about layers](https://beta.docs.qmk.fm/using-qmk/guides/keymap#keymap-and-layers). ### Tap-Hold (Dual Function Keys) Tap-Hold keys let you do one thing when the key is pressed, and another thing when it is held. For example, you can make your Spacebar act as normal when tapping, but serve as Ctrl when held. ### Tap-Dancing (Multi-Tap) Tap-dancing is quite similar to Tap-Hold. The key will act in one way if tapped once, and will act differently if tapped multiple times. ### `Meh` and `Hyper` Again, both of these were shamelessly taken from QMK. `Meh` and `Hyper` are special modifiers for creating keybindings that'll probably never conflict with existing ones. That's possible since `Hyper` is equal to pressing `Ctrl+Alt+Shift+Win` and `Meh` is the same as pressing `Ctrl+Alt+Shift`. ### Audible Feedback Ever wanted to bind your favorite 8bit tunes to your key-presses? Well, now you can! Though, aside from making your hacking session more musical, this feature as some very practical uses as well. For example, it can help you build new muscle-memory connections using audible feedback. See the Capslock <-> Ctrl example below for more on that. ## Installation #### Getting the Executable Start off by grabbing the main `ktrl` executable. Here's how you do that - ``` sudo cargo install --root /usr/local ktrl ``` Note: you may need to install `alsa` development bindings, `autoconf` and `libtool`. For Debian/Ubuntu distributions this can be done with ``` # apt install libalsa-ocaml-dev autoconf libtool libtool-bin ``` #### Setting up ktrl's User and Groups Although a bit cumbersome, this step makes sure we can run ktrl without root privileges. Instead of running it as root, we'll make a new user for ktrl. Then, we'll add the new user to the input and audio groups. Let's get started - ``` sudo useradd -r -s /bin/false ktrl sudo groupadd uinput sudo usermod -aG input ktrl sudo usermod -aG uinput ktrl # If you're using the sound effects sudo usermod -aG audio ktrl ``` Now, let's add a new udev rule that'll allow ktrl to write to `/dev/uinput`. `/dev/uinput` is ktrl's output device. Your keyboard being the input device. ``` git clone https://github.com/itaygarin/ktrl cd ktrl sudo cp ./etc/99-uinput.rules /etc/udev/rules.d/ ``` Note that'll need to reboot your machine for the changes to take effect... #### Setting up ktrl's Assets and Config Now, it's time to decide where you'd like ktrl's assets and config to live. By default, ktrl will assume you've placed these under `/opt/ktrl`. Specifically, `/opt/ktrl/cfg.ron` and `/opt/ktrl/assets`. Though, you can override these defaults with the `--cfg` and `--assets` cli arguments. To set-up the defaults, you can follow these steps - ``` # Asumming you've already cloned and cd`d into the ktrl project sudo mkdir /opt/ktrl sudo cp -r ./assets /opt/ktrl sudo cp examples/cfg.ron /opt/ktrl sudo chown -R ktrl:$USER /opt/ktrl sudo chmod -R 0770 /opt/ktrl ``` #### Locating your Keyboard's input device For ktrl to work, you have to supply it with a path to your keyboard's input device. Input devices reside in the `/dev/input` directory. Linux provides two convenient symlinks-filled directories to make the search process easier. These directories are `/dev/input/by-id` and `/dev/input/by-path`. Within these two directories keyboard devices usually have a `-kbd` suffix. For example, in my laptop, the path is `/dev/input/by-path/platform-i8042-serio-0-event-kbd`. ##### Bluetooth keyboard location If you are using a bluetooth keyboard, you will need to locate the associated `/dev/input/event<#>` as `/dev/input/by-*` only lists usb connected inputs. The best way to do this is to run `cat /proc/bus/input/devices` and search for the associated bluetooth keyboard (the `Phys` output will have the MAC address). Here is an example: ``` I: Bus=0005 Vendor=05ac Product=0239 Version=0050 N: Name="My Keyboard" P: Phys=SO:ME:MA:CA:DD:RS S: Sysfs=/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:07:00.3/usb3/3-5/3-5:1.0/bluetooth/hci0/hci0:256/0005:05AC:0239.0009/input/input40 U: Uniq=SO:ME:MA:CA:DD:RS H: Handlers=sysrq kbd event25 leds ``` Notice in `Handlers`, it tells us the event # we need. So our path to our device is `/dev/input/event25`. #### Setting up ktrl as a Service (Optional) ktrl is a daemon that's designed to run as a background process. Therefore, you might want to set it up as a service. Feel free to skip this step if you just want to experiment with it. Creating a service will vary from distro to distro, though, here are some basic steps that'll get you started on `systemd` based systems - ``` # Again, asumming you've cloned and cd`d into the ktrl project edit ./etc/ktrl.service # change your device path sudo cp ./etc/ktrl.service /etc/systemd/system sudo systemctl daemon-reload sudo systemctl start ktrl.service ``` ## Configuration Finally, we get to the cool part! Though, let's briefly go over ktrl's config primitives before assembling our first config file ### Primitives #### Input Event Codes ktrl uses Linux's input-event-codes everywhere. The full list can be found either in Linux's codebase [here](https://github.com/torvalds/linux/blob/master/include/uapi/linux/input-event-codes.h#L75) or under ktrl's [KeyCode](https://github.com/ItayGarin/ktrl/blob/master/src/keys.rs) enum. Specifically, ktrl uses a subset of the event codes that describe keyboard keys. E.g `KEY_A` and `KEY_LEFTCTRL` describe the 'A' and Left-Ctrl keys. #### Actions Within a layer, we map a source key (ex: `KEY_A`) into an `Action`. Actions describe the **physical input** movements you'll apply to the source key. E.g A `TapHold` describes a **tap** and a **hold**. ##### Actions List - `Tap`: This is the default keyboard action. Use for simple key remappings. - `TapHold`: Attach different `Effect`s for a tap and hold. - `TapDance`: Attach different `Effect`s for a tap and multiple taps. #### Effects An `Action` will contain one or more `Effect`s. These are the **virtual output** effects that'll manifest following the action. E.g Playing a sound, toggling a layer, sending a key sequence, etc... ##### Effects List - `NoOp`: As the name suggests. This won't do anything. - `Key`: This is the default effect you're "used to". - `KeySticky`: Once pressed, the key will remain active until pressed again (like Capslock). - `KeySeq`: Outputs multiple keys at once. E.g `Meh` and `Hyper` are `KeySeq`s - `Meh`: A shorthand for `KeySeq(KEY_LEFTCTRL, KEY_LEFTALT, KEY_LEFTSHIFT)` - `Hyper`: A shorthand for `KeySeq(KEY_LEFTCTRL, KEY_LEFTALT, KEY_LEFTSHIFT, KEY_LEFTMETA)` - `ActivateProfile`: Activates a user-defined profile - `DeactivateProfile`: Deactivates a user-defined profile - `DeactivateAllProfiles`: Deactivates all user-defined profiles - `ToggleLayerAlias`: When pressed, either turns on or off a named layer. - `ToggleLayer`: When pressed, either turns on or off a layer. - `MomentaryLayer`: While pressed, the relevant layer will remain active - `Sound`: Plays one of the pre-built sounds - `SoundEx`: Plays a custom sound provided by you. - `Multi`: Lets you combine all the above effects. E.g `Multi([Sound(Sticky), KeySticky(KEY_LEFTCTRL)])` ### [Configuration File Format](https://github.com/ItayGarin/ktrl/blob/master/examples/cfg.ron) ktrl uses the wonderful [ron](https://github.com/ron-rs/ron) (Rust Object Notation) to make serializing configuration much easier. The format should be pretty intuitive, though please refer to the supplied [cfg.ron](https://github.com/ItayGarin/ktrl/blob/master/examples/cfg.ron) for a practical example. ## Examples ### Remapping `Ctrl` to `Capslock` This is probably one of the most effective yet simple changes you can make right now. You're left pinky will greatly appreciate this change in the long-run. Doing this with ktrl is easy. In one of your layers, add the following - ``` KEY_CAPSLOCK: Tap(Key(KEY_LEFTCTRL)), KEY_LEFTCTRL: Tap(Key(KEY_LEFTCTRL))), ``` Though, let's make this more interesting, shall we? To make the transition smoother, let's add an error sound effect to the left Ctrl. This'll remind you you're doing something wrong - ``` KEY_CAPSLOCK: Tap(Key(KEY_LEFTCTRL)), KEY_LEFTCTRL: Tap(Multi([Key(KEY_LEFTCTRL), Sound(Error)])), ``` Ah, much better! Of course, you can also go cold turkey and only leave the sound effect. Like so - ``` KEY_CAPSLOCK: Tap(Key(KEY_LEFTCTRL)), KEY_LEFTCTRL: Tap(Sound(Error)), ``` ### Home-row Modifiers Another change I've been experimenting with is mapping modifiers to home row keys Though, due note you'll have to calibrate the `tap_hold_wait_time` config value to avoid false-positives. Here's an example setup - ``` KEY_A: TapHold(Key(KEY_A), Key(KEY_LEFTCTRL)), KEY_S: TapHold(Key(KEY_S), Key(KEY_LEFTSHIFT)), KEY_D: TapHold(Key(KEY_D), Key(KEY_LEFTALT)), ``` This will make `A`, `S` and `D` act as usual on taps and as modifiers when held. ## Limitations - `TapHold` and `TapDance` require calibration and tinkering. as stated above, you'll have to tweak the wait times for both of these to minimize false-positives. ## Similar Projects - [alt](https://github.com/ItayGarin/alt): An Event Aggregator that connects to ktrl - [QMK](https://docs.qmk.fm/#/): An open source keyboard firmware (ktrl's inspiration) - [kmonad](https://github.com/david-janssen/kmonad): Very similar to ktrl (written in Haskell) - [xcape](https://github.com/alols/xcape): Implements tap-hold only for modifiers (Linux) - [Space2Ctrl](https://github.com/r0adrunner/Space2Ctrl): Similar to `xcape` - [interception tools](https://gitlab.com/interception/linux/tools): A framework for implementing tools like ktrl - [karabiner-elements](https://karabiner-elements.pqrs.org/): A mature keyboard customizer for Mac