# fix efield command # fix efield/tip4p command ## Syntax fix ID group-ID style ex ey ez keyword value ... - ID, group-ID are documented in [fix](fix) command - style = *efield* or *efield/tip4p* - ex,ey,ez = E-field component values (electric field units) - any of ex,ey,ez can be a variable (see below) - zero or more keyword/value pairs may be appended to args - keyword = *region* or *energy* or *potential* *region* value = region-ID region-ID = ID of region atoms must be in to have added force *energy* value = v_name v_name = variable with name that calculates the potential energy of each atom in the added E-field *potential* value = v_name v_name = variable with name that calculates the electric potential of each atom in the added E-field ## Examples ``` LAMMPS fix kick external-field efield 1.0 0.0 0.0 fix kick external-field efield 0.0 0.0 v_oscillate fix kick external-field efield/tip4p 1.0 0.0 0.0 ``` ## Description Add a force $\vec{F} = q\vec{E}$ to each charged atom in the group due to an external electric field being applied to the system. If the system contains point-dipoles, also add a torque on the dipoles due to the external electric field. ::: versionadded 28Mar2023 ::: When the *efield/tip4p* style is used, the E-field will be applied to the position of the virtual charge site M of a TIP4P molecule instead of the oxygen position as it is defined by a corresponding [TIP4P pair style](pair_lj_cut_tip4p). The forces on the M site due to the external field are projected on the oxygen and hydrogen atoms of the TIP4P molecules. For charges, any of the 3 quantities defining the E-field components can be specified as an equal-style or atom-style [variable](variable), namely *ex*, *ey*, *ez*. If the value is a variable, it should be specified as v_name, where name is the variable name. In this case, the variable will be evaluated each timestep, and its value used to determine the E-field component. For point-dipoles, equal-style variables can be used, but atom-style variables are not currently supported, since they imply a spatial gradient in the electric field which means additional terms with gradients of the field are required for the force and torque on dipoles. Equal-style variables can specify formulas with various mathematical functions, and include [thermo_style](thermo_style) command keywords for the simulation box parameters and timestep and elapsed time. Thus it is easy to specify a time-dependent E-field. Atom-style variables can specify the same formulas as equal-style variables but can also include per-atom values, such as atom coordinates. Thus it is easy to specify a spatially-dependent E-field with optional time-dependence as well. If the *region* keyword is used, the atom must also be in the specified geometric [region](region) in order to have force added to it. ------------------------------------------------------------------------ Adding a force or torque to atoms implies a change in their potential energy as they move or rotate due to the applied E-field. For dynamics via the \"run\" command, this energy can be optionally added to the system\'s potential energy for thermodynamic output (see below). For energy minimization via the \"minimize\" command, this energy must be added to the system\'s potential energy to formulate a self-consistent minimization problem (see below). The *energy* keyword is not allowed if the added field is a constant vector (ex,ey,ez), with all components defined as numeric constants and not as variables. This is because LAMMPS can compute the energy for each charged particle directly as $$U_{efield} = -\vec{x} \cdot q\vec{E} = -q (x\cdot E_x + y\cdot E_y + z\cdot Ez),$$ so that $-\nabla U_{efield} = \vec{F}$. Similarly for point-dipole particles the energy can be computed as $$U_{efield} = -\vec{\mu} \cdot \vec{E} = -\mu_x\cdot E_x + \mu_y\cdot E_y + \mu_z\cdot E_z$$ The *energy* keyword is optional if the added force is defined with one or more variables, and if you are performing dynamics via the [run](run) command. If the keyword is not used, LAMMPS will set the energy to 0.0, which is typically fine for dynamics. The *energy* keyword (or *potential* keyword, described below) is required if the added force is defined with one or more variables, and you are performing energy minimization via the \"minimize\" command for charged particles. It is not required for point-dipoles, but a warning is issued since the minimizer in LAMMPS does not rotate dipoles, so you should not expect to be able to minimize the orientation of dipoles in an applied electric field. The *energy* keyword specifies the name of an atom-style [variable](variable) which is used to compute the energy of each atom as function of its position. Like variables used for *ex*, *ey*, *ez*, the energy variable is specified as \"v_name\", where \"name\" is the variable name. Note that when the *energy* keyword is used during an energy minimization, you must ensure that the formula defined for the atom-style [variable](variable) is consistent with the force variable formulas, i.e. that -Grad(E) = F. For example, if the force due to the electric field were a spring-like F = kx, then the energy formula should be E = -0.5kx\^2. If you don\'t do this correctly, the minimization will not converge properly. ::: versionadded 15Jun2023 ::: The *potential* keyword can be used as an alternative to the *energy* keyword to specify the name of an atom-style variable, which is used to compute the added electric potential to each atom as a function of its position. The variable should have units of electric field multiplied by distance (that is, in [units real]{.title-ref}, the potential should be in volts). As with the *energy* keyword, the variable name is specified as \"v_name\". The energy added by this fix is then calculated as the electric potential multiplied by charge. The *potential* keyword is mainly intended for correct charge equilibration in simulations with [fix qeq/reaxff\]{.title-ref}, since with variable charges the electric potential can be known beforehand but the energy cannot. A small additional benefit is that the *energy* keyword requires an additional conversion to energy units which the *potential* keyword avoids. Thus, when the *potential* keyword is specified, the *energy* keyword must not be used. As with *energy*, the *potential* keyword is not allowed if the added field is a constant vector. The *potential* keyword is not supported by *fix efield/tip4p*. ------------------------------------------------------------------------ ## Restart, fix_modify, output, run start/stop, minimize info No information about this fix is written to [binary restart files](restart). The [fix_modify](fix_modify) *energy* option is supported by this fix to add the potential energy inferred by the added force due to the electric field to the global potential energy of the system as part of [thermodynamic output](thermo_style). The default setting for this fix is [fix_modify energy no](fix_modify). Note that this energy is a fictitious quantity but is needed so that the [minimize](minimize) command can include the forces added by this fix in a consistent manner. I.e. there is a decrease in potential energy when atoms move in the direction of the added force due to the electric field. The [fix_modify](fix_modify) *virial* option is supported by this fix to add the contribution due to the added forces on atoms to both the global pressure and per-atom stress of the system via the [compute pressure](compute_pressure) and [compute stress/atom](compute_stress_atom) commands. The former can be accessed by [thermodynamic output](thermo_style). The default setting for this fix is [fix_modify virial no](fix_modify). The [fix_modify](fix_modify) *respa* option is supported by this fix. This allows to set at which level of the [r-RESPA](run_style) integrator the fix adding its forces. Default is the outermost level. This fix computes a global scalar and a global 3-vector of forces, which can be accessed by various [output commands](Howto_output). The scalar is the potential energy discussed above. The vector is the total force added to the group of atoms. The scalar and vector values calculated by this fix are \"extensive\". No parameter of this fix can be used with the *start/stop* keywords of the [run](run) command. The forces due to this fix are imposed during an energy minimization, invoked by the [minimize](minimize) command. You should not specify force components with a variable that has time-dependence for use with a minimizer, since the minimizer increments the timestep as the iteration count during the minimization. :::: note ::: title Note ::: If you want the fictitious potential energy associated with the added forces to be included in the total potential energy of the system (the quantity being minimized), you MUST enable the [fix_modify](fix_modify) *energy* option for this fix. :::: ## Restrictions Fix style *efield/tip4p* is part of the EXTRA-FIX package. It is only enabled if LAMMPS was built with that package. See the [Build package](Build_package) page for more info. Fix style *efield/tip4p* can only be used with tip4p pair styles. ## Related commands [fix addforce](fix_addforce) ## Default none