# fix nph/asphere command Accelerator Variants: *nph/asphere/omp* ## Syntax fix ID group-ID nph/asphere args keyword value ... - ID, group-ID are documented in [fix](fix) command - nph/asphere = style name of this fix command - additional barostat related keyword/value pairs from the [fix nph](fix_nh) command can be appended ## Examples ``` LAMMPS fix 1 all nph/asphere iso 0.0 0.0 1000.0 fix 2 all nph/asphere x 5.0 5.0 1000.0 fix 2 all nph/asphere x 5.0 5.0 1000.0 drag 0.2 fix 2 water nph/asphere aniso 0.0 0.0 1000.0 dilate partial ``` ## Description Perform constant NPH integration to update position, velocity, orientation, and angular velocity each timestep for aspherical or ellipsoidal particles in the group using a Nose/Hoover pressure barostat. P is pressure; H is enthalpy. This creates a system trajectory consistent with the isenthalpic ensemble. This fix differs from the [fix nph](fix_nh) command, which assumes point particles and only updates their position and velocity. Additional parameters affecting the barostat are specified by keywords and values documented with the [fix nph](fix_nh) command. See, for example, discussion of the *aniso*, and *dilate* keywords. The particles in the fix group are the only ones whose velocities and positions are updated by the velocity/position update portion of the NPH integration. Regardless of what particles are in the fix group, a global pressure is computed for all particles. Similarly, when the size of the simulation box is changed, all particles are re-scaled to new positions, unless the keyword *dilate* is specified with a value of *partial*, in which case only the particles in the fix group are re-scaled. The latter can be useful for leaving the coordinates of particles in a solid substrate unchanged and controlling the pressure of a surrounding fluid. ------------------------------------------------------------------------ This fix computes a temperature and pressure each timestep. To do this, the fix creates its own computes of style \"temp/asphere\" and \"pressure\", as if these commands had been issued: ``` LAMMPS compute fix-ID_temp all temp/asphere compute fix-ID_press all pressure fix-ID_temp ``` See the [compute temp/asphere](compute_temp_asphere) and [compute pressure](compute_pressure) commands for details. Note that the IDs of the new computes are the fix-ID + underscore + \"temp\" or fix_ID + underscore + \"press\", and the group for the new computes is \"all\" since pressure is computed for the entire system. Note that these are NOT the computes used by thermodynamic output (see the [thermo_style](thermo_style) command) with ID = *thermo_temp* and *thermo_press*. This means you can change the attributes of this fix\'s temperature or pressure via the [compute_modify](compute_modify) command or print this temperature or pressure during thermodynamic output via the [thermo_style custom](thermo_style) command using the appropriate compute-ID. It also means that changing attributes of *thermo_temp* or *thermo_press* will have no effect on this fix. ------------------------------------------------------------------------ Styles with a *gpu*, *intel*, *kk*, *omp*, or *opt* suffix are functionally the same as the corresponding style without the suffix. They have been optimized to run faster, depending on your available hardware, as discussed on the [Accelerator packages](Speed_packages) page. The accelerated styles take the same arguments and should produce the same results, except for round-off and precision issues. These accelerated styles are part of the GPU, INTEL, KOKKOS, OPENMP, and OPT packages, respectively. They are only enabled if LAMMPS was built with those packages. See the [Build package](Build_package) page for more info. You can specify the accelerated styles explicitly in your input script by including their suffix, or you can use the [-suffix command-line switch](Run_options) when you invoke LAMMPS, or you can use the [suffix](suffix) command in your input script. See the [Accelerator packages](Speed_packages) page for more instructions on how to use the accelerated styles effectively. ## Restart, fix_modify, output, run start/stop, minimize info This fix writes the state of the Nose/Hoover barostat to [binary restart files](restart). See the [read_restart](read_restart) command for info on how to re-specify a fix in an input script that reads a restart file, so that the operation of the fix continues in an uninterrupted fashion. The [fix_modify](fix_modify) *temp* and *press* options are supported by this fix. You can use them to assign a [compute](compute) you have defined to this fix which will be used in its thermostatting or barostatting procedure. If you do this, note that the kinetic energy derived from the compute temperature should be consistent with the virial term computed using all atoms for the pressure. LAMMPS will warn you if you choose to compute temperature on a subset of atoms. The cumulative energy change in the system imposed by this fix is included in the [thermodynamic output](thermo_style) keywords *ecouple* and *econserve*. See the [thermo_style](thermo_style) doc page for details. This fix computes the same global scalar and global vector of quantities as does the [fix nph](fix_nh) command. This fix can ramp its target pressure over multiple runs, using the *start* and *stop* keywords of the [run](run) command. See the [run](run) command for details of how to do this. This fix is not invoked during [energy minimization](minimize). ## Restrictions This fix is part of the ASPHERE package. It is only enabled if LAMMPS was built with that package. See the [Build package](Build_package) page for more info. This fix requires that atoms store torque and angular momentum and a quaternion as defined by the [atom_style ellipsoid](atom_style) command. All particles in the group must be finite-size. They cannot be point particles, but they can be aspherical or spherical as defined by their shape attribute. ## Related commands [fix nph](fix_nh), [fix nve_asphere](fix_nve_asphere), [fix nvt_asphere](fix_nvt_asphere), [fix npt_asphere](fix_npt_asphere), [fix_modify](fix_modify) ## Default none