/*- * See the file LICENSE for redistribution information. * * Copyright (c) 1996-2009 Oracle. All rights reserved. * * $Id$ */ #ifndef _DB_LOG_H_ #define _DB_LOG_H_ #include "dbinc/db_swap.h" #if defined(__cplusplus) extern "C" { #endif /******************************************************* * DBREG: * The DB file register code keeps track of open files. It's stored * in the log subsystem's shared region, and so appears in the log.h * header file, but is logically separate. * The dbp may not be open if we are recovering the abort of a create. *******************************************************/ /* * The per-process table that maps log file-id's to DB structures. */ typedef struct __db_entry { DB *dbp; /* Open dbp for this file id. */ int deleted; /* File was not found during open. */ } DB_ENTRY; /* * FNAME -- * File name and id. */ struct __fname { SH_TAILQ_ENTRY q; /* File name queue. */ pid_t pid; /* Process that owns this. */ int32_t id; /* Logging file id. */ int32_t old_id; /* Saved logging file id. */ DBTYPE s_type; /* Saved DB type. */ roff_t fname_off; /* File name offset. */ roff_t dname_off; /* Database name offset. */ db_pgno_t meta_pgno; /* Page number of the meta page. */ u_int8_t ufid[DB_FILE_ID_LEN]; /* Unique file id. */ u_int32_t create_txnid; /* * Txn ID of the DB create, stored so * we can log it at register time. */ db_mutex_t mutex; /* mutex from db handle. */ /* number of txn referencing + 1 for the db handle. */ u_int32_t txn_ref; #define DB_FNAME_CLOSED 0x01 /* DBP was closed. */ #define DB_FNAME_DURABLE 0x02 /* File is durable. */ #define DB_FNAME_INMEM 0x04 /* File is in memory. */ #define DB_FNAME_NOTLOGGED 0x08 /* Log of close failed. */ #define DB_FNAME_RECOVER 0x10 /* File was opened by recovery code. */ #define DB_FNAME_RESTORED 0x20 /* File may be in restored txn. */ u_int32_t flags; }; /* File open/close register log record opcodes. */ #define DBREG_CHKPNT 1 /* Checkpoint: file name/id dump. */ #define DBREG_CLOSE 2 /* File close. */ #define DBREG_OPEN 3 /* File open. */ #define DBREG_PREOPEN 4 /* Open in mpool only. */ #define DBREG_RCLOSE 5 /* File close after recovery. */ #define DBREG_REOPEN 6 /* Open for in-memory database. */ /******************************************************* * LOG: * The log subsystem information. *******************************************************/ struct __hdr; typedef struct __hdr HDR; struct __log; typedef struct __log LOG; struct __log_persist; typedef struct __log_persist LOGP; #define LFPREFIX "log." /* Log file name prefix. */ #define LFNAME "log.%010d" /* Log file name template. */ #define LFNAME_V1 "log.%05d" /* Log file name template, rev 1. */ #define LG_MAX_DEFAULT (10 * MEGABYTE) /* 10 MB. */ #define LG_MAX_INMEM (256 * 1024) /* 256 KB. */ #define LG_BSIZE_INMEM (1 * MEGABYTE) /* 1 MB. */ /* * Allocate a few bytes under a power-of-two value. BDB doesn't care if it's * a power-of-two or not, and requesting slightly under a power-of-two allows * stupid allocators to avoid wasting space. */ #define LG_BASE_REGION_SIZE (130000) /* 128KB - 1072B */ #define LG_BSIZE_DEFAULT (32000) /* 32 KB - 768B */ #define LG_CURSOR_BUF_SIZE (32000) /* 32 KB - 768B */ /* * DB_LOG * Per-process log structure. */ struct __db_log { /* * These fields need to be protected for multi-threaded support. */ db_mutex_t mtx_dbreg; /* Mutex for thread protection. */ DB_ENTRY *dbentry; /* Recovery file-id mapping. */ #define DB_GROW_SIZE 64 int32_t dbentry_cnt; /* Entries. Grows by DB_GROW_SIZE. */ /* * These fields are only accessed when the region lock is held, so * they do not have to be protected by the thread lock as well. */ u_int32_t lfname; /* Log file "name". */ DB_FH *lfhp; /* Log file handle. */ time_t lf_timestamp; /* Log file timestamp. */ u_int8_t *bufp; /* Region buffer. */ /* These fields are not thread protected. */ ENV *env; /* Environment */ REGINFO reginfo; /* Region information. */ #define DBLOG_AUTOREMOVE 0x01 /* Autoremove log files. */ #define DBLOG_DIRECT 0x02 /* Do direct I/O on the log. */ #define DBLOG_DSYNC 0x04 /* Set OS_DSYNC on the log. */ #define DBLOG_FORCE_OPEN 0x08 /* Force the DB open even if it appears * to be deleted. */ #define DBLOG_INMEMORY 0x10 /* Logging is in memory. */ #define DBLOG_OPENFILES 0x20 /* Prepared files need to be open. */ #define DBLOG_RECOVER 0x40 /* We are in recovery. */ #define DBLOG_ZERO 0x80 /* Zero fill the log. */ u_int32_t flags; }; /* * HDR -- * Log record header. */ struct __hdr { u_int32_t prev; /* Previous offset. */ u_int32_t len; /* Current length. */ u_int8_t chksum[DB_MAC_KEY]; /* Current checksum. */ u_int8_t iv[DB_IV_BYTES]; /* IV */ u_int32_t orig_size; /* Original size of log record */ /* !!! - 'size' is not written to log, must be last in hdr */ size_t size; /* Size of header to use */ }; /* * LOG_HDR_SUM -- XOR in prev and len * This helps avoids the race misreading the log while it * it is being updated. */ #define LOG_HDR_SUM(crypto, hdr, sum) do { \ if (crypto) { \ ((u_int32_t *)sum)[0] ^= ((HDR *)hdr)->prev; \ ((u_int32_t *)sum)[1] ^= ((HDR *)hdr)->len; \ } else { \ ((u_int32_t *)sum)[0] ^= \ ((HDR *)hdr)->prev ^ ((HDR *)hdr)->len; \ } \ } while (0) /* * We use HDR internally, and then when we write out, we write out * prev, len, and then a 4-byte checksum if normal operation or * a crypto-checksum and IV and original size if running in crypto * mode. We must store the original size in case we pad. Set the * size when we set up the header. We compute a DB_MAC_KEY size * checksum regardless, but we can safely just use the first 4 bytes. */ #define HDR_NORMAL_SZ 12 #define HDR_CRYPTO_SZ 12 + DB_MAC_KEY + DB_IV_BYTES struct __log_persist { u_int32_t magic; /* DB_LOGMAGIC */ u_int32_t version; /* DB_LOGVERSION */ u_int32_t log_size; /* Log file size. */ u_int32_t notused; /* Historically the log file mode. */ }; /* Macros to lock/unlock the log region as a whole. */ #define LOG_SYSTEM_LOCK(env) \ MUTEX_LOCK(env, ((LOG *) \ (env)->lg_handle->reginfo.primary)->mtx_region) #define LOG_SYSTEM_UNLOCK(env) \ MUTEX_UNLOCK(env, ((LOG *) \ (env)->lg_handle->reginfo.primary)->mtx_region) /* * LOG -- * Shared log region. One of these is allocated in shared memory, * and describes the log. */ struct __log { db_mutex_t mtx_region; /* Region mutex. */ db_mutex_t mtx_filelist; /* Mutex guarding file name list. */ LOGP persist; /* Persistent information. */ SH_TAILQ_HEAD(__fq1) fq; /* List of file names. */ int32_t fid_max; /* Max fid allocated. */ roff_t free_fid_stack; /* Stack of free file ids. */ u_int free_fids; /* Height of free fid stack. */ u_int free_fids_alloced; /* N free fid slots allocated. */ /* * The lsn LSN is the file offset that we're about to write and which * we will return to the user. */ DB_LSN lsn; /* LSN at current file offset. */ /* * The f_lsn LSN is the LSN (returned to the user) that "owns" the * first byte of the buffer. If the record associated with the LSN * spans buffers, it may not reflect the physical file location of * the first byte of the buffer. */ DB_LSN f_lsn; /* LSN of first byte in the buffer. */ size_t b_off; /* Current offset in the buffer. */ u_int32_t w_off; /* Current write offset in the file. */ u_int32_t len; /* Length of the last record. */ DB_LSN active_lsn; /* Oldest active LSN in the buffer. */ size_t a_off; /* Offset in the buffer of first active file. */ /* * The s_lsn LSN is the last LSN that we know is on disk, not just * written, but synced. This field is protected by the flush mutex * rather than by the region mutex. */ db_mutex_t mtx_flush; /* Mutex guarding flushing. */ int in_flush; /* Log flush in progress. */ DB_LSN s_lsn; /* LSN of the last sync. */ DB_LOG_STAT stat; /* Log statistics. */ /* * This timestamp is updated anytime someone unlinks log * files. This can happen when calling __log_vtruncate * or replication internal init when it unlinks log files. * * The timestamp is used so that other processes that might * have file handles to log files know to close/reopen them * so they're not potentially writing to now-removed files. */ time_t timestamp; /* Log trunc timestamp. */ /* * !!! * NOTE: the next group of fields are NOT protected by the log * region lock. They are protected by REP->mtx_clientdb. If you * need access to both, you must acquire REP->mtx_clientdb * before acquiring the log region lock. * * The waiting_lsn is used by the replication system. It is the * first LSN that we are holding without putting in the log, because * we received one or more log records out of order. Associated with * the waiting_lsn is the number of log records that we still have to * receive before we decide that we should request it again. * * The max_wait_lsn is used to control retransmission in the face * of dropped messages. If we are requesting all records from the * current gap (i.e., chunk of the log that we are missing), then * the max_wait_lsn contains the first LSN that we are known to have * in the __db.rep.db. If we requested only a single record, then * the max_wait_lsn has the LSN of that record we requested. */ /* BEGIN fields protected by rep->mtx_clientdb. */ DB_LSN waiting_lsn; /* First log record after a gap. */ DB_LSN verify_lsn; /* LSN we are waiting to verify. */ DB_LSN prev_ckp; /* LSN of ckp preceeding verify_lsn. */ DB_LSN max_wait_lsn; /* Maximum LSN requested. */ DB_LSN max_perm_lsn; /* Maximum PERMANENT LSN processed. */ db_timespec max_lease_ts; /* Maximum Lease timestamp seen. */ db_timespec wait_ts; /* Time to wait before requesting. */ db_timespec rcvd_ts; /* Initial received time to wait. */ db_timespec last_ts; /* Last time of insert in temp db. */ /* * The ready_lsn is also used by the replication system. It is the * next LSN we expect to receive. It's normally equal to "lsn", * except at the beginning of a log file, at which point it's set * to the LSN of the first record of the new file (after the * header), rather than to 0. */ DB_LSN ready_lsn; /* * The bulk_buf is used by replication for bulk transfer. While this * is protected by REP->mtx_clientdb, this doesn't contend with the * above fields because the above are used by clients and the bulk * fields below are used by a master. */ roff_t bulk_buf; /* Bulk transfer buffer in region. */ uintptr_t bulk_off; /* Current offset into bulk buffer. */ u_int32_t bulk_len; /* Length of buffer. */ u_int32_t bulk_flags; /* Bulk buffer flags. */ /* END fields protected by rep->mtx_clientdb. */ /* * During initialization, the log system walks forward through the * last log file to find its end. If it runs into a checkpoint * while it's doing so, it caches it here so that the transaction * system doesn't need to walk through the file again on its * initialization. */ DB_LSN cached_ckp_lsn; u_int32_t regionmax; /* Configured size of the region. */ roff_t buffer_off; /* Log buffer offset in the region. */ u_int32_t buffer_size; /* Log buffer size. */ u_int32_t log_size; /* Log file's size. */ u_int32_t log_nsize; /* Next log file's size. */ int filemode; /* Log file permissions mode. */ /* * DB_LOG_AUTOREMOVE and DB_LOG_INMEMORY: not protected by a mutex, * all we care about is if they're zero or non-zero. */ int db_log_autoremove; int db_log_inmemory; u_int32_t ncommit; /* Number of txns waiting to commit. */ DB_LSN t_lsn; /* LSN of first commit */ SH_TAILQ_HEAD(__commit) commits;/* list of txns waiting to commit. */ SH_TAILQ_HEAD(__free) free_commits;/* free list of commit structs. */ /* * In-memory logs maintain a list of the start positions of all log * files currently active in the in-memory buffer. This is to make the * lookup from LSN to log buffer offset efficient. */ SH_TAILQ_HEAD(__logfile) logfiles; SH_TAILQ_HEAD(__free_logfile) free_logfiles; }; /* * __db_commit structure -- * One of these is allocated for each transaction waiting to commit. */ struct __db_commit { db_mutex_t mtx_txnwait; /* Mutex for txn to wait on. */ DB_LSN lsn; /* LSN of commit record. */ SH_TAILQ_ENTRY links; /* Either on free or waiting list. */ #define DB_COMMIT_FLUSH 0x0001 /* Flush the log when you wake up. */ u_int32_t flags; }; /* * Check for the proper progression of Log Sequence Numbers. * If we are rolling forward the LSN on the page must be greater * than or equal to the previous LSN in log record. * We ignore NOT LOGGED LSNs. The user did an unlogged update. * We should eventually see a log record that matches and continue * forward. * A ZERO LSN implies a page that was allocated prior to the recovery * start point and then truncated later in the log. An allocation of a * page after this page will extend the file, leaving a hole. We want to * ignore this page until it is truncated again. * */ #define CHECK_LSN(e, redo, cmp, lsn, prev) \ if (DB_REDO(redo) && (cmp) < 0 && \ ((!IS_NOT_LOGGED_LSN(*(lsn)) && !IS_ZERO_LSN(*(lsn))) || \ IS_REP_CLIENT(e))) { \ ret = __db_check_lsn(e, lsn, prev); \ goto out; \ } #define CHECK_ABORT(e, redo, cmp, lsn, prev) \ if (redo == DB_TXN_ABORT && (cmp) != 0 && \ ((!IS_NOT_LOGGED_LSN(*(lsn)) && !IS_ZERO_LSN(*(lsn))) || \ IS_REP_CLIENT(e))) { \ ret = __db_check_lsn(e, lsn, prev); \ goto out; \ } /* * Helper for in-memory logs -- check whether an offset is in range * in a ring buffer (inclusive of start, exclusive of end). */ struct __db_filestart { u_int32_t file; size_t b_off; SH_TAILQ_ENTRY links; /* Either on free or waiting list. */ }; #define RINGBUF_LEN(lp, start, end) \ ((start) < (end) ? \ (end) - (start) : (lp)->buffer_size - ((start) - (end))) /* * Internal macro to set pointer to the begin_lsn for generated * logging routines. If begin_lsn is already set then do nothing. * Return a pointer to the last lsn too. */ #undef DB_SET_TXN_LSNP #define DB_SET_TXN_LSNP(txn, blsnp, llsnp) do { \ DB_LSN *__lsnp; \ TXN_DETAIL *__td; \ __td = (txn)->td; \ *(llsnp) = &__td->last_lsn; \ while (__td->parent != INVALID_ROFF) \ __td = R_ADDR(&(txn)->mgrp->reginfo, __td->parent); \ __lsnp = &__td->begin_lsn; \ if (IS_ZERO_LSN(*__lsnp)) \ *(blsnp) = __lsnp; \ } while (0) /* * These are used in __log_backup to determine which LSN in the * checkpoint record to compare and return. */ #define CKPLSN_CMP 0 #define LASTCKP_CMP 1 /* * Status codes indicating the validity of a log file examined by * __log_valid(). */ typedef enum { DB_LV_INCOMPLETE, DB_LV_NONEXISTENT, DB_LV_NORMAL, DB_LV_OLD_READABLE, DB_LV_OLD_UNREADABLE } logfile_validity; #if defined(__cplusplus) } #endif #include "dbinc_auto/dbreg_auto.h" #include "dbinc_auto/dbreg_ext.h" #include "dbinc_auto/log_ext.h" #endif /* !_DB_LOG_H_ */