# mruby configuration macros

## The configuration file

You can do the build configuration in the build configuration file. The default
configuration file is `build_config/default.rb`.

You can specify your own configuration file by the `MRUBY_CONFIG` environment
variable (you can use `CONFIG` for shorthand for `MRUBY_CONFIG`). If the path
doesn't exist, `build_config/${MRUBY_CONFIG}.rb` is used.

## How to use these macros

Just add the configuration value to the `MRuby::Build#defines` attribute.
This is the same for `MRuby::CrossBuild`.

```ruby
# build_config.rb

MRuby::Build.new do |conf|
  ...
  conf.defines << 'MRB_GC_FIXED_ARENA'
  conf.defines << 'MRB_NO_METHOD_CACHE'
  ...
end
```

**_NOTE_**

- Use common definitions (`conf.defines`) instead of per-compiler definitions (e.g., `conf.cc.defines`) unless there is a special reason not to.
- It is now deprecated to edit the `include/mruby/mrbconf.h` file or give it directly as a compiler flag, as was the case before.

## stdio setting

`MRB_NO_STDIO`

- When defined `<stdio.h>` functions won't be used.
- Some features will be disabled when this is enabled:
  - `mrb_irep` load/dump from/to file.
  - Compiling mruby script from a file.
  - Printing features in **src/print.c**.

## Debug macros

`MRB_USE_DEBUG_HOOK`

- When defined code fetch hook and debug OP hook will be enabled.
- When using any of the hook set function pointer `code_fetch_hook` and/or `debug_op_hook` of `mrb_state`.
- Fetch hook will be called before any OP.
- Debug OP hook will be called when dispatching `OP_DEBUG`.

`MRB_DEBUG`

- When defined `mrb_assert*` macro will be defined with macros from `<assert.h>`.
- Could be enabled via `enable_debug` method of `MRuby::Build`.

## Stack configuration

`MRB_STACK_EXTEND_DOUBLING`

- If defined doubles the stack size when extending it.
- Otherwise extends stack with `MRB_STACK_GROWTH`.

`MRB_STACK_GROWTH`

- Default value is `128`.
- Used in stack extending.
- Ignored when `MRB_STACK_EXTEND_DOUBLING` is defined.

`MRB_STACK_MAX`

- Default value is `0x40000 - MRB_STACK_GROWTH`.
- Raises `RuntimeError` when stack size exceeds this value.

## Primitive type configuration

`MRB_USE_FLOAT32`

- When defined single-precision floating-point type(C type `float`) is used as `mrb_float`.
- Otherwise, double-precision floating-point type(C type `double`) is used as `mrb_float`.

`MRB_NO_FLOAT`

- When defined removes floating-point numbers from mruby.
- It makes mruby easier to handle in "Micro-controller without FPU" and "Kernel Space".

`MRB_INT32`

- When defined, or `MRB_INT64` are not defined on 32-bit CPU mode, `mrb_int` will be defined as `int32_t`.
- Conflicts with `MRB_INT64`.

`MRB_INT64`

- When defined, or `MRB_INT32` are not defined on 64-bit CPU mode, `mrb_int` will be defined as `int64_t`.
- Conflicts with `MRB_INT32`.

## Garbage collector configuration

`MRB_GC_STRESS`

- When defined full GC is emitted per each `RBasic` allocation.
- Mainly used in memory manager debugging.
- If defined at the same time as `MRB_DEBUG`, full GC is emitted also per each heap allocation (`mrb_malloc()` or etc.).
  This configuration slows down mruby execution by a factor of 2 to 3 or even more.

`MRB_GC_TURN_OFF_GENERATIONAL`

- When defined turns generational GC by default.

`MRB_GC_FIXED_ARENA`

- When defined used fixed size GC arena.
- Raises `RuntimeError` when this is defined and GC arena size exceeds `MRB_GC_ARENA_SIZE`.
- Useful tracking unnecessary mruby object allocation.

`MRB_GC_ARENA_SIZE`

- Default value is `100`.
- Ignored when `MRB_GC_FIXED_ARENA` isn't defined.
- Defines fixed GC arena size.

`MRB_HEAP_PAGE_SIZE`

- Defines value is `1024`.
- Specifies number of `RBasic` per each heap page.
- To calculate the number of bytes per heap page, it is "(size of management data per heap page) + (size per object) \* `MRB_HEAP_PAGE_SIZE`".
  In mruby 3.1.0, the "size of management data per heap page" is 6 words, also "size per object" is 6 words.
  For a 32-bit CPU, `(6 * 4) + (6 * 4) * MRB_HEAP_PAGE_SIZE` gives the bytes of size per heap page.
  Conversely, for example, to keep the size per heap page to 4 Ki bytes,
  calculate `(4096 - (6 * 4)) / (6 * 4)` to specify `MRB_HEAP_PAGE_SIZE=169`.

## Memory pool configuration

`POOL_ALIGNMENT`

- Default value is `4`.
- If you're allocating data types that requires alignment more than default value define the
  largest value of required alignment.

`POOL_PAGE_SIZE`

- Default value is `16000`.
- Specifies page size of pool page.
- Smaller the value is increases memory overhead.

## State atexit configuration

`MRB_FIXED_STATE_ATEXIT_STACK`

- If defined enables fixed size `mrb_state` atexit stack.
- Raises `RuntimeError` when `mrb_state_atexit` call count to same `mrb_state` exceeds
  `MRB_FIXED_STATE_ATEXIT_STACK_SIZE`'s value.

`MRB_FIXED_STATE_ATEXIT_STACK_SIZE`

- Default value is `5`.
- If `MRB_FIXED_STATE_ATEXIT_STACK` isn't defined this macro is ignored.

## `mrb_value` configuration

`MRB_ENDIAN_BIG`

- If defined compiles mruby for big endian machines.
- Used in `MRB_NAN_BOXING`.
- Some mrbgem use this mrbconf.

`MRB_NAN_BOXING`

- If defined represent `mrb_value` in boxed `double`.
- Conflicts with `MRB_USE_FLOAT32` and `MRB_NO_FLOAT`.

`MRB_WORD_BOXING`

- If defined represent `mrb_value` as a word.
- If defined `Float` will be a mruby object with `RBasic`.

## Reduce heap memory configuration

`MRB_USE_ETEXT_RO_DATA_P`

- Use `etext` and `edata` section addresses defined by the linker to detect read-only data.
- Those addresses are widely available, but not portable, nor standardized.
- This macro is defined by default on User-mode Linux.

`MRB_NO_DEFAULT_RO_DATA_P`

- Define this macro when the default `mrb_ro_data_p()` does not work for any reason.

`MRB_USE_CUSTOM_RO_DATA_P`

- Please try if `MRB_USE_LINK_TIME_RO_DATA_P` is not available.
- The `mrb_ro_data_p()` function is implemented by the user in an arbitrary file.
- The prototype declaration is `mrb_bool mrb_ro_data_p(const char *ptr)`.
- Return `TRUE` if `ptr` is in the read-only section, otherwise return `FALSE`.

## Other configuration

`MRB_MALLOC_TRIM`

- call malloc_trim(0) for each mrb_full_gc() call

`MRB_UTF8_STRING`

- Adds UTF-8 encoding support to character-oriented String instance methods.
- If it isn't defined, they only support the US-ASCII encoding.

`MRB_STR_LENGTH_MAX`

- The maximum length of strings (default 1MB)
- set this value to zero to skip the check

`MRB_ARY_LENGTH_MAX`

- The maximum length of strings (default 1MB)
- set this value to zero to skip the check

`MRB_FUNCALL_ARGC_MAX`

- Default value is `16`.
- Specifies 4th argument(`argc`) max value of `mrb_funcall`.
- Raises `ArgumentError` when the `argc` argument is bigger then this value `mrb_funcall`.

`KHASH_DEFAULT_SIZE`

- Default value is `32`.
- Specifies default size of khash table bucket.
- Used in `kh_init_ ## name` function.

`MRB_NO_METHOD_CACHE`

- Disable method cache to save memory.

`MRB_METHOD_CACHE_SIZE`

- Default value is `256`.
- Ignored if `MRB_NO_METHOD_CACHE` is defined.
- Need to be the power of 2.

`MRB_USE_METHOD_T_STRUCT`

- Use C struct to represent `mrb_method_t`
- No `MRB_USE_METHOD_T_STRUCT` requires highest 2 bits of function pointers to be zero
- Define this macro on machines that use higher bits of pointers

`MRB_USE_ALL_SYMBOLS`

- Make it available `Symbol.all_symbols` in `mrbgems/mruby-symbol-ext`
- Increase heap memory usage.

`MRB_USE_VM_SWITCH_DISPATCH`

- Turn on switch dispatch in VM loop