/** @defgroup flash_file FLASH
*
* @ingroup STM32L1xx
*
* @brief libopencm3 STM32L1xx FLASH
*
* @version 1.0.0
*
* @author @htmlonly © @endhtmlonly 2010
* Thomas Otto
* @author @htmlonly © @endhtmlonly 2010
* Mark Butler
* @author @htmlonly © @endhtmlonly 2012
* Karl Palsson
*
* @date 14 January 2014
*
* For the STM32L1xx, accessing FLASH memory is described briefly in
* section 2.3.3 of the STM32L1xx Reference Manual.
* For detailed programming information see:
* PM0062 programming manual: STM32L1xxxx Flash and EEPROM programming
* March 2012, Doc ID 16024 Rev 5
*
* LGPL License Terms @ref lgpl_license
*/
/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2010 Thomas Otto
* Copyright (C) 2010 Mark Butler
* Copyright (C) 2012-13 Karl Palsson
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see .
*/
/**@{*/
#include
/*---------------------------------------------------------------------------*/
/** @brief Enable 64 Bit Programming Mode
*/
void flash_64bit_enable(void)
{
FLASH_ACR |= FLASH_ACR_ACC64;
}
/*---------------------------------------------------------------------------*/
/** @brief Enable 32 Bit Programming Mode
This mode is a low power mode. It must be used at low frequencies and does not
allow prefetch or wait states to be used.
*/
void flash_64bit_disable(void)
{
FLASH_ACR &= ~FLASH_ACR_ACC64;
}
/**@}*/