/* * Copyright (c) 2017 Google LLC * Contributed by Stephane Eranian * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies * of the Software, and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be included in all * copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A * PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. * * This file is part of libpfm, a performance monitoring support library for * applications on Linux. * * PMU: skx_unc_pcu */ static intel_x86_umask_t skx_unc_p_power_state_occupancy[]={ { .uname = "CORES_C0", .ucode = 0x4000, .udesc = "Number of cores in C-State -- C0 and C1", }, { .uname = "CORES_C3", .ucode = 0x8000, .udesc = "Number of cores in C-State -- C3", }, { .uname = "CORES_C6", .ucode = 0xc000, .udesc = "Number of cores in C-State -- C6 and C7", }, }; static intel_x86_entry_t intel_skx_unc_p_pe[]={ { .name = "UNC_P_CLOCKTICKS", .code = 0x0, .desc = "The PCU runs off a fixed 1 GHz clock. This event counts the number of pclk cycles measured while the counter was enabled. The pclk, like the Memory Controllers dclk, counts at a constant rate making it a good measure of actual wall timee.", .modmsk = SKX_UNC_PCU_ATTRS, .cntmsk = 0xf, }, { .name = "UNC_P_CORE_TRANSITION_CYCLES", .code = 0x60, .desc = "TBD", .modmsk = SKX_UNC_PCU_ATTRS, .cntmsk = 0xf, }, { .name = "UNC_P_CTS_EVENT0", .code = 0x11, .desc = "TBD", .modmsk = SKX_UNC_PCU_ATTRS, .cntmsk = 0xf, }, { .name = "UNC_P_CTS_EVENT1", .code = 0x12, .desc = "TBD", .modmsk = SKX_UNC_PCU_ATTRS, .cntmsk = 0xf, }, { .name = "UNC_P_DEMOTIONS", .code = 0x30, .desc = "TBD", .modmsk = SKX_UNC_PCU_ATTRS, .cntmsk = 0xf, }, { .name = "UNC_P_FIVR_PS_PS0_CYCLES", .code = 0x75, .desc = "Cycles spent in phase-shedding power state 0", .modmsk = SKX_UNC_PCU_ATTRS, .cntmsk = 0xf, }, { .name = "UNC_P_FIVR_PS_PS1_CYCLES", .code = 0x76, .desc = "Cycles spent in phase-shedding power state 1", .modmsk = SKX_UNC_PCU_ATTRS, .cntmsk = 0xf, }, { .name = "UNC_P_FIVR_PS_PS2_CYCLES", .code = 0x77, .desc = "Cycles spent in phase-shedding power state 2", .modmsk = SKX_UNC_PCU_ATTRS, .cntmsk = 0xf, }, { .name = "UNC_P_FIVR_PS_PS3_CYCLES", .code = 0x78, .desc = "Cycles spent in phase-shedding power state 3", .modmsk = SKX_UNC_PCU_ATTRS, .cntmsk = 0xf, }, { .name = "UNC_P_FREQ_MAX_LIMIT_THERMAL_CYCLES", .code = 0x4, .desc = "Counts the number of cycles when thermal conditions are the upper limit on frequency. This is related to the THERMAL_THROTTLE CYCLES_ABOVE_TEMP event, which always counts cycles when we are above the thermal temperature. This event (STRONGEST_UPPER_LIMIT) is sampled at the output of the algorithm that determines the actual frequency, while THERMAL_THROTTLE looks at the input.", .modmsk = SKX_UNC_PCU_ATTRS, .cntmsk = 0xf, }, { .name = "UNC_P_FREQ_MAX_POWER_CYCLES", .code = 0x5, .desc = "Counts the number of cycles when power is the upper limit on frequency.", .modmsk = SKX_UNC_PCU_ATTRS, .cntmsk = 0xf, }, { .name = "UNC_P_FREQ_MIN_IO_P_CYCLES", .code = 0x73, .desc = "Counts the number of cycles when IO P Limit is preventing us from dropping the frequency lower. This algorithm monitors the needs to the IO subsystem on both local and remote sockets and will maintain a frequency high enough to maintain good IO BW. This is necessary for when all the IA cores on a socket are idle but a user still would like to maintain high IO Bandwidth.", .modmsk = SKX_UNC_PCU_ATTRS, .cntmsk = 0xf, }, { .name = "UNC_P_FREQ_TRANS_CYCLES", .code = 0x74, .desc = "Counts the number of cycles when the system is changing frequency. This can not be filtered by thread ID. One can also use it with the occupancy counter that monitors number of threads in C0 to estimate the performance impact that frequency transitions had on the system.", .modmsk = SKX_UNC_PCU_ATTRS, .cntmsk = 0xf, }, { .name = "UNC_P_MCP_PROCHOT_CYCLES", .code = 0x6, .desc = "TBD", .modmsk = SKX_UNC_PCU_ATTRS, .cntmsk = 0xf, }, { .name = "UNC_P_MEMORY_PHASE_SHEDDING_CYCLES", .code = 0x2f, .desc = "Counts the number of cycles that the PCU has triggered memory phase shedding. This is a mode that can be run in the iMC physicals that saves power at the expense of additional latency.", .modmsk = SKX_UNC_PCU_ATTRS, .cntmsk = 0xf, }, { .name = "UNC_P_PKG_RESIDENCY_C0_CYCLES", .code = 0x2a, .desc = "Counts the number of cycles when the package was in C0. This event can be used in conjunction with edge detect to count C0 entrances (or exits using invert). Residency events do not include transition times.", .modmsk = SKX_UNC_PCU_ATTRS, .cntmsk = 0xf, }, { .name = "UNC_P_PKG_RESIDENCY_C2E_CYCLES", .code = 0x2b, .desc = "Counts the number of cycles when the package was in C2E. This event can be used in conjunction with edge detect to count C2E entrances (or exits using invert). Residency events do not include transition times.", .modmsk = SKX_UNC_PCU_ATTRS, .cntmsk = 0xf, }, { .name = "UNC_P_PKG_RESIDENCY_C3_CYCLES", .code = 0x2c, .desc = "Counts the number of cycles when the package was in C3. This event can be used in conjunction with edge detect to count C3 entrances (or exits using invert). Residency events do not include transition times.", .modmsk = SKX_UNC_PCU_ATTRS, .cntmsk = 0xf, }, { .name = "UNC_P_PKG_RESIDENCY_C6_CYCLES", .code = 0x2d, .desc = "Counts the number of cycles when the package was in C6. This event can be used in conjunction with edge detect to count C6 entrances (or exits using invert). Residency events do not include transition times.", .modmsk = SKX_UNC_PCU_ATTRS, .cntmsk = 0xf, }, { .name = "UNC_P_PMAX_THROTTLED_CYCLES", .code = 0x7, .desc = "TBD", .modmsk = SKX_UNC_PCU_ATTRS, .cntmsk = 0xf, }, { .name = "UNC_P_PROCHOT_EXTERNAL_CYCLES", .code = 0xa, .desc = "Counts the number of cycles that we are in external PROCHOT mode. This mode is triggered when a sensor off the die determines that something off-die (like DRAM) is too hot and must throttle to avoid damaging the chip.", .modmsk = SKX_UNC_PCU_ATTRS, .cntmsk = 0xf, }, { .name = "UNC_P_PROCHOT_INTERNAL_CYCLES", .code = 0x9, .desc = "Counts the number of cycles that we are in internal PROCHOT mode. This mode is triggered when a sensor on the die determines that we are too hot and must throttle to avoid damaging the chip.", .modmsk = SKX_UNC_PCU_ATTRS, .cntmsk = 0xf, }, { .name = "UNC_P_TOTAL_TRANSITION_CYCLES", .code = 0x72, .desc = "Number of cycles spent performing core C state transitions across all cores.", .modmsk = SKX_UNC_PCU_ATTRS, .cntmsk = 0xf, }, { .name = "UNC_P_FREQ_BAND0_CYCLES", .desc = "Frequency Residency", .code = 0xb, .cntmsk = 0xf, .flags = INTEL_X86_NO_AUTOENCODE, .modmsk = SKX_UNC_PCU_BAND_ATTRS, .modmsk_req = _SNBEP_UNC_ATTR_FF, }, { .name = "UNC_P_FREQ_BAND1_CYCLES", .desc = "Frequency Residency", .code = 0xc, .cntmsk = 0xf, .flags = INTEL_X86_NO_AUTOENCODE, .modmsk = SKX_UNC_PCU_BAND_ATTRS, .modmsk_req = _SNBEP_UNC_ATTR_FF, }, { .name = "UNC_P_FREQ_BAND2_CYCLES", .desc = "Frequency Residency", .code = 0xd, .cntmsk = 0xf, .flags = INTEL_X86_NO_AUTOENCODE, .modmsk = SKX_UNC_PCU_BAND_ATTRS, .modmsk_req = _SNBEP_UNC_ATTR_FF, }, { .name = "UNC_P_FREQ_BAND3_CYCLES", .desc = "Frequency Residency", .code = 0xe, .cntmsk = 0xf, .flags = INTEL_X86_NO_AUTOENCODE, .modmsk = SKX_UNC_PCU_BAND_ATTRS, .modmsk_req = _SNBEP_UNC_ATTR_FF, }, { .name = "UNC_P_VR_HOT_CYCLES", .code = 0x42, .desc = "TBD", .modmsk = SKX_UNC_PCU_ATTRS, .cntmsk = 0xf, }, { .name = "UNC_P_POWER_STATE_OCCUPANCY", .code = 0x80, .desc = "This is an occupancy event that tracks the number of cores that are in the chosen C-State. It can be used by itself to get the average number of cores in that C-state with threshholding to generate histograms, or with other PCU events and occupancy triggering to capture other details.", .modmsk = SKX_UNC_PCU_ATTRS, .cntmsk = 0xf, .ngrp = 1, .umasks = skx_unc_p_power_state_occupancy, .numasks= LIBPFM_ARRAY_SIZE(skx_unc_p_power_state_occupancy), }, };