/* $OpenBSD: bn_lcl.h,v 1.19 2014/06/12 15:49:28 deraadt Exp $ */ /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) * All rights reserved. * * This package is an SSL implementation written * by Eric Young (eay@cryptsoft.com). * The implementation was written so as to conform with Netscapes SSL. * * This library is free for commercial and non-commercial use as long as * the following conditions are aheared to. The following conditions * apply to all code found in this distribution, be it the RC4, RSA, * lhash, DES, etc., code; not just the SSL code. The SSL documentation * included with this distribution is covered by the same copyright terms * except that the holder is Tim Hudson (tjh@cryptsoft.com). * * Copyright remains Eric Young's, and as such any Copyright notices in * the code are not to be removed. * If this package is used in a product, Eric Young should be given attribution * as the author of the parts of the library used. * This can be in the form of a textual message at program startup or * in documentation (online or textual) provided with the package. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * "This product includes cryptographic software written by * Eric Young (eay@cryptsoft.com)" * The word 'cryptographic' can be left out if the rouines from the library * being used are not cryptographic related :-). * 4. If you include any Windows specific code (or a derivative thereof) from * the apps directory (application code) you must include an acknowledgement: * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" * * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * The licence and distribution terms for any publically available version or * derivative of this code cannot be changed. i.e. this code cannot simply be * copied and put under another distribution licence * [including the GNU Public Licence.] */ /* ==================================================================== * Copyright (c) 1998-2000 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * 3. All advertising materials mentioning features or use of this * software must display the following acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" * * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to * endorse or promote products derived from this software without * prior written permission. For written permission, please contact * openssl-core@openssl.org. * * 5. Products derived from this software may not be called "OpenSSL" * nor may "OpenSSL" appear in their names without prior written * permission of the OpenSSL Project. * * 6. Redistributions of any form whatsoever must retain the following * acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit (http://www.openssl.org/)" * * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. * ==================================================================== * * This product includes cryptographic software written by Eric Young * (eay@cryptsoft.com). This product includes software written by Tim * Hudson (tjh@cryptsoft.com). * */ #ifndef HEADER_BN_LCL_H #define HEADER_BN_LCL_H #include #include #ifdef __cplusplus extern "C" { #endif /* * BN_window_bits_for_exponent_size -- macro for sliding window mod_exp functions * * * For window size 'w' (w >= 2) and a random 'b' bits exponent, * the number of multiplications is a constant plus on average * * 2^(w-1) + (b-w)/(w+1); * * here 2^(w-1) is for precomputing the table (we actually need * entries only for windows that have the lowest bit set), and * (b-w)/(w+1) is an approximation for the expected number of * w-bit windows, not counting the first one. * * Thus we should use * * w >= 6 if b > 671 * w = 5 if 671 > b > 239 * w = 4 if 239 > b > 79 * w = 3 if 79 > b > 23 * w <= 2 if 23 > b * * (with draws in between). Very small exponents are often selected * with low Hamming weight, so we use w = 1 for b <= 23. */ #define BN_window_bits_for_exponent_size(b) \ ((b) > 671 ? 6 : \ (b) > 239 ? 5 : \ (b) > 79 ? 4 : \ (b) > 23 ? 3 : 1) /* BN_mod_exp_mont_consttime is based on the assumption that the * L1 data cache line width of the target processor is at least * the following value. */ #define MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH ( 64 ) #define MOD_EXP_CTIME_MIN_CACHE_LINE_MASK (MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH - 1) /* Window sizes optimized for fixed window size modular exponentiation * algorithm (BN_mod_exp_mont_consttime). * * To achieve the security goals of BN_mode_exp_mont_consttime, the * maximum size of the window must not exceed * log_2(MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH). * * Window size thresholds are defined for cache line sizes of 32 and 64, * cache line sizes where log_2(32)=5 and log_2(64)=6 respectively. A * window size of 7 should only be used on processors that have a 128 * byte or greater cache line size. */ #if MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH == 64 # define BN_window_bits_for_ctime_exponent_size(b) \ ((b) > 937 ? 6 : \ (b) > 306 ? 5 : \ (b) > 89 ? 4 : \ (b) > 22 ? 3 : 1) # define BN_MAX_WINDOW_BITS_FOR_CTIME_EXPONENT_SIZE (6) #elif MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH == 32 # define BN_window_bits_for_ctime_exponent_size(b) \ ((b) > 306 ? 5 : \ (b) > 89 ? 4 : \ (b) > 22 ? 3 : 1) # define BN_MAX_WINDOW_BITS_FOR_CTIME_EXPONENT_SIZE (5) #endif /* Pentium pro 16,16,16,32,64 */ /* Alpha 16,16,16,16.64 */ #define BN_MULL_SIZE_NORMAL (16) /* 32 */ #define BN_MUL_RECURSIVE_SIZE_NORMAL (16) /* 32 less than */ #define BN_SQR_RECURSIVE_SIZE_NORMAL (16) /* 32 */ #define BN_MUL_LOW_RECURSIVE_SIZE_NORMAL (32) /* 32 */ #define BN_MONT_CTX_SET_SIZE_WORD (64) /* 32 */ #if !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) /* * BN_UMULT_HIGH section. * * No, I'm not trying to overwhelm you when stating that the * product of N-bit numbers is 2*N bits wide:-) No, I don't expect * you to be impressed when I say that if the compiler doesn't * support 2*N integer type, then you have to replace every N*N * multiplication with 4 (N/2)*(N/2) accompanied by some shifts * and additions which unavoidably results in severe performance * penalties. Of course provided that the hardware is capable of * producing 2*N result... That's when you normally start * considering assembler implementation. However! It should be * pointed out that some CPUs (most notably Alpha, PowerPC and * upcoming IA-64 family:-) provide *separate* instruction * calculating the upper half of the product placing the result * into a general purpose register. Now *if* the compiler supports * inline assembler, then it's not impossible to implement the * "bignum" routines (and have the compiler optimize 'em) * exhibiting "native" performance in C. That's what BN_UMULT_HIGH * macro is about:-) * * */ # if defined(__alpha) # if defined(__GNUC__) && __GNUC__>=2 # define BN_UMULT_HIGH(a,b) ({ \ register BN_ULONG ret; \ asm ("umulh %1,%2,%0" \ : "=r"(ret) \ : "r"(a), "r"(b)); \ ret; }) # endif /* compiler */ # elif defined(_ARCH_PPC) && defined(_LP64) # if defined(__GNUC__) && __GNUC__>=2 # define BN_UMULT_HIGH(a,b) ({ \ register BN_ULONG ret; \ asm ("mulhdu %0,%1,%2" \ : "=r"(ret) \ : "r"(a), "r"(b)); \ ret; }) # endif /* compiler */ # elif defined(__x86_64) || defined(__x86_64__) # if defined(__GNUC__) && __GNUC__>=2 # define BN_UMULT_HIGH(a,b) ({ \ register BN_ULONG ret,discard; \ asm ("mulq %3" \ : "=a"(discard),"=d"(ret) \ : "a"(a), "g"(b) \ : "cc"); \ ret; }) # define BN_UMULT_LOHI(low,high,a,b) \ asm ("mulq %3" \ : "=a"(low),"=d"(high) \ : "a"(a),"g"(b) \ : "cc"); # endif # elif defined(__mips) && defined(_LP64) # if defined(__GNUC__) && __GNUC__>=2 # if __GNUC__>=4 && __GNUC_MINOR__>=4 /* "h" constraint is no more since 4.4 */ # define BN_UMULT_HIGH(a,b) (((__uint128_t)(a)*(b))>>64) # define BN_UMULT_LOHI(low,high,a,b) ({ \ __uint128_t ret=(__uint128_t)(a)*(b); \ (high)=ret>>64; (low)=ret; }) # else # define BN_UMULT_HIGH(a,b) ({ \ register BN_ULONG ret; \ asm ("dmultu %1,%2" \ : "=h"(ret) \ : "r"(a), "r"(b) : "l"); \ ret; }) # define BN_UMULT_LOHI(low,high,a,b)\ asm ("dmultu %2,%3" \ : "=l"(low),"=h"(high) \ : "r"(a), "r"(b)); # endif # endif # endif /* cpu */ #endif /* OPENSSL_NO_ASM */ /************************************************************* * Using the long long type */ #define Lw(t) (((BN_ULONG)(t))&BN_MASK2) #define Hw(t) (((BN_ULONG)((t)>>BN_BITS2))&BN_MASK2) #ifdef BN_DEBUG_RAND #define bn_clear_top2max(a) \ { \ int ind = (a)->dmax - (a)->top; \ BN_ULONG *ftl = &(a)->d[(a)->top-1]; \ for (; ind != 0; ind--) \ *(++ftl) = 0x0; \ } #else #define bn_clear_top2max(a) #endif #ifdef BN_LLONG #define mul_add(r,a,w,c) { \ BN_ULLONG t; \ t=(BN_ULLONG)w * (a) + (r) + (c); \ (r)= Lw(t); \ (c)= Hw(t); \ } #define mul(r,a,w,c) { \ BN_ULLONG t; \ t=(BN_ULLONG)w * (a) + (c); \ (r)= Lw(t); \ (c)= Hw(t); \ } #define sqr(r0,r1,a) { \ BN_ULLONG t; \ t=(BN_ULLONG)(a)*(a); \ (r0)=Lw(t); \ (r1)=Hw(t); \ } #elif defined(BN_UMULT_LOHI) #define mul_add(r,a,w,c) { \ BN_ULONG high,low,ret,tmp=(a); \ ret = (r); \ BN_UMULT_LOHI(low,high,w,tmp); \ ret += (c); \ (c) = (ret<(c))?1:0; \ (c) += high; \ ret += low; \ (c) += (ret>BN_BITS4)&BN_MASK2l) #define L2HBITS(a) (((a)<>(BN_BITS4-1); \ m =(m&BN_MASK2l)<<(BN_BITS4+1); \ l=(l+m)&BN_MASK2; if (l < m) h++; \ (lo)=l; \ (ho)=h; \ } #define mul_add(r,a,bl,bh,c) { \ BN_ULONG l,h; \ \ h= (a); \ l=LBITS(h); \ h=HBITS(h); \ mul64(l,h,(bl),(bh)); \ \ /* non-multiply part */ \ l=(l+(c))&BN_MASK2; if (l < (c)) h++; \ (c)=(r); \ l=(l+(c))&BN_MASK2; if (l < (c)) h++; \ (c)=h&BN_MASK2; \ (r)=l; \ } #define mul(r,a,bl,bh,c) { \ BN_ULONG l,h; \ \ h= (a); \ l=LBITS(h); \ h=HBITS(h); \ mul64(l,h,(bl),(bh)); \ \ /* non-multiply part */ \ l+=(c); if ((l&BN_MASK2) < (c)) h++; \ (c)=h&BN_MASK2; \ (r)=l&BN_MASK2; \ } #endif /* !BN_LLONG */ void bn_mul_normal(BN_ULONG *r, BN_ULONG *a, int na, BN_ULONG *b, int nb); void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b); void bn_mul_comba4(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b); void bn_sqr_normal(BN_ULONG *r, const BN_ULONG *a, int n, BN_ULONG *tmp); void bn_sqr_comba8(BN_ULONG *r, const BN_ULONG *a); void bn_sqr_comba4(BN_ULONG *r, const BN_ULONG *a); int bn_cmp_words(const BN_ULONG *a, const BN_ULONG *b, int n); int bn_cmp_part_words(const BN_ULONG *a, const BN_ULONG *b, int cl, int dl); void bn_mul_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n2, int dna, int dnb, BN_ULONG *t); void bn_mul_part_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n, int tna, int tnb, BN_ULONG *t); void bn_sqr_recursive(BN_ULONG *r, const BN_ULONG *a, int n2, BN_ULONG *t); void bn_mul_low_normal(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n); void bn_mul_low_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n2, BN_ULONG *t); void bn_mul_high(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, BN_ULONG *l, int n2, BN_ULONG *t); BN_ULONG bn_add_part_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b, int cl, int dl); BN_ULONG bn_sub_part_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b, int cl, int dl); int bn_mul_mont(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp, const BN_ULONG *np, const BN_ULONG *n0, int num); #ifdef __cplusplus } #endif #endif