/** @file * @brief MAVLink comm protocol generated from common.xml * @see http://mavlink.org */ #pragma once #ifndef MAVLINK_COMMON_H #define MAVLINK_COMMON_H #ifndef MAVLINK_H #error Wrong include order: MAVLINK_COMMON.H MUST NOT BE DIRECTLY USED. Include mavlink.h from the same directory instead or set ALL AND EVERY defines from MAVLINK.H manually accordingly, including the #define MAVLINK_H call. #endif #undef MAVLINK_THIS_XML_IDX #define MAVLINK_THIS_XML_IDX 0 #ifdef __cplusplus extern "C" { #endif // MESSAGE LENGTHS AND CRCS #ifndef MAVLINK_MESSAGE_LENGTHS #define MAVLINK_MESSAGE_LENGTHS {} #endif #ifndef MAVLINK_MESSAGE_CRCS #define MAVLINK_MESSAGE_CRCS {{0, 50, 9, 0, 0, 0}, {1, 124, 31, 0, 0, 0}, {2, 137, 12, 0, 0, 0}, {4, 237, 14, 3, 12, 13}, {5, 217, 28, 1, 0, 0}, {6, 104, 3, 0, 0, 0}, {7, 119, 32, 0, 0, 0}, {11, 89, 6, 1, 4, 0}, {20, 214, 20, 3, 2, 3}, {21, 159, 2, 3, 0, 1}, {22, 220, 25, 0, 0, 0}, {23, 168, 23, 3, 4, 5}, {24, 24, 30, 0, 0, 0}, {25, 23, 101, 0, 0, 0}, {26, 170, 22, 0, 0, 0}, {27, 144, 26, 0, 0, 0}, {28, 67, 16, 0, 0, 0}, {29, 115, 14, 0, 0, 0}, {30, 39, 28, 0, 0, 0}, {31, 246, 32, 0, 0, 0}, {32, 185, 28, 0, 0, 0}, {33, 104, 28, 0, 0, 0}, {34, 237, 22, 0, 0, 0}, {35, 244, 22, 0, 0, 0}, {36, 222, 21, 0, 0, 0}, {37, 212, 6, 3, 4, 5}, {38, 9, 6, 3, 4, 5}, {39, 254, 37, 3, 32, 33}, {40, 230, 4, 3, 2, 3}, {41, 28, 4, 3, 2, 3}, {42, 28, 2, 0, 0, 0}, {43, 132, 2, 3, 0, 1}, {44, 221, 4, 3, 2, 3}, {45, 232, 2, 3, 0, 1}, {46, 11, 2, 0, 0, 0}, {47, 153, 3, 3, 0, 1}, {48, 41, 13, 1, 12, 0}, {49, 39, 12, 0, 0, 0}, {50, 78, 37, 3, 18, 19}, {51, 196, 4, 3, 2, 3}, {54, 15, 27, 3, 24, 25}, {55, 3, 25, 0, 0, 0}, {61, 167, 72, 0, 0, 0}, {62, 183, 26, 0, 0, 0}, {63, 119, 181, 0, 0, 0}, {64, 191, 225, 0, 0, 0}, {65, 118, 42, 0, 0, 0}, {66, 148, 6, 3, 2, 3}, {67, 21, 4, 0, 0, 0}, {69, 243, 11, 0, 0, 0}, {70, 124, 18, 3, 16, 17}, {73, 38, 37, 3, 32, 33}, {74, 20, 20, 0, 0, 0}, {75, 158, 35, 3, 30, 31}, {76, 152, 33, 3, 30, 31}, {77, 143, 3, 3, 8, 9}, {81, 106, 22, 0, 0, 0}, {82, 49, 39, 3, 36, 37}, {83, 22, 37, 0, 0, 0}, {84, 143, 53, 3, 50, 51}, {85, 140, 51, 0, 0, 0}, {86, 5, 53, 3, 50, 51}, {87, 150, 51, 0, 0, 0}, {89, 231, 28, 0, 0, 0}, {90, 183, 56, 0, 0, 0}, {91, 63, 42, 0, 0, 0}, {92, 54, 33, 0, 0, 0}, {93, 47, 81, 0, 0, 0}, {100, 175, 26, 0, 0, 0}, {101, 102, 32, 0, 0, 0}, {102, 158, 32, 0, 0, 0}, {103, 208, 20, 0, 0, 0}, {104, 56, 32, 0, 0, 0}, {105, 93, 62, 0, 0, 0}, {106, 138, 44, 0, 0, 0}, {107, 108, 64, 0, 0, 0}, {108, 32, 84, 0, 0, 0}, {109, 185, 9, 0, 0, 0}, {110, 84, 254, 3, 1, 2}, {111, 34, 16, 0, 0, 0}, {112, 174, 12, 0, 0, 0}, {113, 124, 36, 0, 0, 0}, {114, 237, 44, 0, 0, 0}, {115, 4, 64, 0, 0, 0}, {116, 76, 22, 0, 0, 0}, {117, 128, 6, 3, 4, 5}, {118, 56, 14, 0, 0, 0}, {119, 116, 12, 3, 10, 11}, {120, 134, 97, 0, 0, 0}, {121, 237, 2, 3, 0, 1}, {122, 203, 2, 3, 0, 1}, {123, 250, 113, 3, 0, 1}, {124, 87, 35, 0, 0, 0}, {125, 203, 6, 0, 0, 0}, {126, 220, 79, 0, 0, 0}, {127, 25, 35, 0, 0, 0}, {128, 226, 35, 0, 0, 0}, {129, 46, 22, 0, 0, 0}, {130, 29, 13, 0, 0, 0}, {131, 223, 255, 0, 0, 0}, {132, 85, 14, 0, 0, 0}, {133, 6, 18, 0, 0, 0}, {134, 229, 43, 0, 0, 0}, {135, 203, 8, 0, 0, 0}, {136, 1, 22, 0, 0, 0}, {137, 195, 14, 0, 0, 0}, {138, 109, 36, 0, 0, 0}, {139, 168, 43, 3, 41, 42}, {140, 181, 41, 0, 0, 0}, {141, 47, 32, 0, 0, 0}, {142, 72, 243, 0, 0, 0}, {143, 131, 14, 0, 0, 0}, {144, 127, 93, 0, 0, 0}, {146, 103, 100, 0, 0, 0}, {147, 154, 36, 0, 0, 0}, {148, 178, 60, 0, 0, 0}, {149, 200, 30, 0, 0, 0}, {230, 163, 42, 0, 0, 0}, {231, 105, 40, 0, 0, 0}, {232, 151, 63, 0, 0, 0}, {233, 35, 182, 0, 0, 0}, {234, 150, 40, 0, 0, 0}, {241, 90, 32, 0, 0, 0}, {242, 104, 52, 0, 0, 0}, {243, 85, 53, 1, 52, 0}, {244, 95, 6, 0, 0, 0}, {245, 130, 2, 0, 0, 0}, {246, 184, 38, 0, 0, 0}, {247, 81, 19, 0, 0, 0}, {248, 8, 254, 3, 3, 4}, {249, 204, 36, 0, 0, 0}, {250, 49, 30, 0, 0, 0}, {251, 170, 18, 0, 0, 0}, {252, 44, 18, 0, 0, 0}, {253, 83, 51, 0, 0, 0}, {254, 46, 9, 0, 0, 0}, {256, 71, 42, 3, 8, 9}, {257, 131, 9, 0, 0, 0}, {258, 187, 32, 3, 0, 1}, {259, 92, 235, 0, 0, 0}, {260, 146, 5, 0, 0, 0}, {261, 179, 27, 0, 0, 0}, {262, 12, 18, 0, 0, 0}, {263, 133, 255, 0, 0, 0}, {264, 49, 28, 0, 0, 0}, {265, 26, 16, 0, 0, 0}, {266, 193, 255, 3, 2, 3}, {267, 35, 255, 3, 2, 3}, {268, 14, 4, 3, 2, 3}, {269, 58, 246, 0, 0, 0}, {270, 232, 247, 3, 14, 15}, {299, 19, 96, 0, 0, 0}, {300, 217, 22, 0, 0, 0}, {310, 28, 17, 0, 0, 0}, {311, 95, 116, 0, 0, 0}, {320, 243, 20, 3, 2, 3}, {321, 88, 2, 3, 0, 1}, {322, 243, 149, 0, 0, 0}, {323, 78, 147, 3, 0, 1}, {324, 132, 146, 0, 0, 0}, {330, 23, 158, 0, 0, 0}} #endif #include "../protocol.h" #define MAVLINK_ENABLED_COMMON // ENUM DEFINITIONS /** @brief Micro air vehicle / autopilot classes. This identifies the individual model. */ #ifndef HAVE_ENUM_MAV_AUTOPILOT #define HAVE_ENUM_MAV_AUTOPILOT typedef enum MAV_AUTOPILOT { MAV_AUTOPILOT_GENERIC=0, /* Generic autopilot, full support for everything | */ MAV_AUTOPILOT_RESERVED=1, /* Reserved for future use. | */ MAV_AUTOPILOT_SLUGS=2, /* SLUGS autopilot, http://slugsuav.soe.ucsc.edu | */ MAV_AUTOPILOT_ARDUPILOTMEGA=3, /* ArduPilotMega / ArduCopter, http://diydrones.com | */ MAV_AUTOPILOT_OPENPILOT=4, /* OpenPilot, http://openpilot.org | */ MAV_AUTOPILOT_GENERIC_WAYPOINTS_ONLY=5, /* Generic autopilot only supporting simple waypoints | */ MAV_AUTOPILOT_GENERIC_WAYPOINTS_AND_SIMPLE_NAVIGATION_ONLY=6, /* Generic autopilot supporting waypoints and other simple navigation commands | */ MAV_AUTOPILOT_GENERIC_MISSION_FULL=7, /* Generic autopilot supporting the full mission command set | */ MAV_AUTOPILOT_INVALID=8, /* No valid autopilot, e.g. a GCS or other MAVLink component | */ MAV_AUTOPILOT_PPZ=9, /* PPZ UAV - http://nongnu.org/paparazzi | */ MAV_AUTOPILOT_UDB=10, /* UAV Dev Board | */ MAV_AUTOPILOT_FP=11, /* FlexiPilot | */ MAV_AUTOPILOT_PX4=12, /* PX4 Autopilot - http://pixhawk.ethz.ch/px4/ | */ MAV_AUTOPILOT_SMACCMPILOT=13, /* SMACCMPilot - http://smaccmpilot.org | */ MAV_AUTOPILOT_AUTOQUAD=14, /* AutoQuad -- http://autoquad.org | */ MAV_AUTOPILOT_ARMAZILA=15, /* Armazila -- http://armazila.com | */ MAV_AUTOPILOT_AEROB=16, /* Aerob -- http://aerob.ru | */ MAV_AUTOPILOT_ASLUAV=17, /* ASLUAV autopilot -- http://www.asl.ethz.ch | */ MAV_AUTOPILOT_SMARTAP=18, /* SmartAP Autopilot - http://sky-drones.com | */ MAV_AUTOPILOT_ENUM_END=19, /* | */ } MAV_AUTOPILOT; #endif /** @brief */ #ifndef HAVE_ENUM_MAV_TYPE #define HAVE_ENUM_MAV_TYPE typedef enum MAV_TYPE { MAV_TYPE_GENERIC=0, /* Generic micro air vehicle. | */ MAV_TYPE_FIXED_WING=1, /* Fixed wing aircraft. | */ MAV_TYPE_QUADROTOR=2, /* Quadrotor | */ MAV_TYPE_COAXIAL=3, /* Coaxial helicopter | */ MAV_TYPE_HELICOPTER=4, /* Normal helicopter with tail rotor. | */ MAV_TYPE_ANTENNA_TRACKER=5, /* Ground installation | */ MAV_TYPE_GCS=6, /* Operator control unit / ground control station | */ MAV_TYPE_AIRSHIP=7, /* Airship, controlled | */ MAV_TYPE_FREE_BALLOON=8, /* Free balloon, uncontrolled | */ MAV_TYPE_ROCKET=9, /* Rocket | */ MAV_TYPE_GROUND_ROVER=10, /* Ground rover | */ MAV_TYPE_SURFACE_BOAT=11, /* Surface vessel, boat, ship | */ MAV_TYPE_SUBMARINE=12, /* Submarine | */ MAV_TYPE_HEXAROTOR=13, /* Hexarotor | */ MAV_TYPE_OCTOROTOR=14, /* Octorotor | */ MAV_TYPE_TRICOPTER=15, /* Tricopter | */ MAV_TYPE_FLAPPING_WING=16, /* Flapping wing | */ MAV_TYPE_KITE=17, /* Kite | */ MAV_TYPE_ONBOARD_CONTROLLER=18, /* Onboard companion controller | */ MAV_TYPE_VTOL_DUOROTOR=19, /* Two-rotor VTOL using control surfaces in vertical operation in addition. Tailsitter. | */ MAV_TYPE_VTOL_QUADROTOR=20, /* Quad-rotor VTOL using a V-shaped quad config in vertical operation. Tailsitter. | */ MAV_TYPE_VTOL_TILTROTOR=21, /* Tiltrotor VTOL | */ MAV_TYPE_VTOL_RESERVED2=22, /* VTOL reserved 2 | */ MAV_TYPE_VTOL_RESERVED3=23, /* VTOL reserved 3 | */ MAV_TYPE_VTOL_RESERVED4=24, /* VTOL reserved 4 | */ MAV_TYPE_VTOL_RESERVED5=25, /* VTOL reserved 5 | */ MAV_TYPE_GIMBAL=26, /* Onboard gimbal | */ MAV_TYPE_ADSB=27, /* Onboard ADSB peripheral | */ MAV_TYPE_PARAFOIL=28, /* Steerable, nonrigid airfoil | */ MAV_TYPE_DODECAROTOR=29, /* Dodecarotor | */ MAV_TYPE_ENUM_END=30, /* | */ } MAV_TYPE; #endif /** @brief These values define the type of firmware release. These values indicate the first version or release of this type. For example the first alpha release would be 64, the second would be 65. */ #ifndef HAVE_ENUM_FIRMWARE_VERSION_TYPE #define HAVE_ENUM_FIRMWARE_VERSION_TYPE typedef enum FIRMWARE_VERSION_TYPE { FIRMWARE_VERSION_TYPE_DEV=0, /* development release | */ FIRMWARE_VERSION_TYPE_ALPHA=64, /* alpha release | */ FIRMWARE_VERSION_TYPE_BETA=128, /* beta release | */ FIRMWARE_VERSION_TYPE_RC=192, /* release candidate | */ FIRMWARE_VERSION_TYPE_OFFICIAL=255, /* official stable release | */ FIRMWARE_VERSION_TYPE_ENUM_END=256, /* | */ } FIRMWARE_VERSION_TYPE; #endif /** @brief These flags encode the MAV mode. */ #ifndef HAVE_ENUM_MAV_MODE_FLAG #define HAVE_ENUM_MAV_MODE_FLAG typedef enum MAV_MODE_FLAG { MAV_MODE_FLAG_CUSTOM_MODE_ENABLED=1, /* 0b00000001 Reserved for future use. | */ MAV_MODE_FLAG_TEST_ENABLED=2, /* 0b00000010 system has a test mode enabled. This flag is intended for temporary system tests and should not be used for stable implementations. | */ MAV_MODE_FLAG_AUTO_ENABLED=4, /* 0b00000100 autonomous mode enabled, system finds its own goal positions. Guided flag can be set or not, depends on the actual implementation. | */ MAV_MODE_FLAG_GUIDED_ENABLED=8, /* 0b00001000 guided mode enabled, system flies waypoints / mission items. | */ MAV_MODE_FLAG_STABILIZE_ENABLED=16, /* 0b00010000 system stabilizes electronically its attitude (and optionally position). It needs however further control inputs to move around. | */ MAV_MODE_FLAG_HIL_ENABLED=32, /* 0b00100000 hardware in the loop simulation. All motors / actuators are blocked, but internal software is full operational. | */ MAV_MODE_FLAG_MANUAL_INPUT_ENABLED=64, /* 0b01000000 remote control input is enabled. | */ MAV_MODE_FLAG_SAFETY_ARMED=128, /* 0b10000000 MAV safety set to armed. Motors are enabled / running / can start. Ready to fly. Additional note: this flag is to be ignore when sent in the command MAV_CMD_DO_SET_MODE and MAV_CMD_COMPONENT_ARM_DISARM shall be used instead. The flag can still be used to report the armed state. | */ MAV_MODE_FLAG_ENUM_END=129, /* | */ } MAV_MODE_FLAG; #endif /** @brief These values encode the bit positions of the decode position. These values can be used to read the value of a flag bit by combining the base_mode variable with AND with the flag position value. The result will be either 0 or 1, depending on if the flag is set or not. */ #ifndef HAVE_ENUM_MAV_MODE_FLAG_DECODE_POSITION #define HAVE_ENUM_MAV_MODE_FLAG_DECODE_POSITION typedef enum MAV_MODE_FLAG_DECODE_POSITION { MAV_MODE_FLAG_DECODE_POSITION_CUSTOM_MODE=1, /* Eighth bit: 00000001 | */ MAV_MODE_FLAG_DECODE_POSITION_TEST=2, /* Seventh bit: 00000010 | */ MAV_MODE_FLAG_DECODE_POSITION_AUTO=4, /* Sixt bit: 00000100 | */ MAV_MODE_FLAG_DECODE_POSITION_GUIDED=8, /* Fifth bit: 00001000 | */ MAV_MODE_FLAG_DECODE_POSITION_STABILIZE=16, /* Fourth bit: 00010000 | */ MAV_MODE_FLAG_DECODE_POSITION_HIL=32, /* Third bit: 00100000 | */ MAV_MODE_FLAG_DECODE_POSITION_MANUAL=64, /* Second bit: 01000000 | */ MAV_MODE_FLAG_DECODE_POSITION_SAFETY=128, /* First bit: 10000000 | */ MAV_MODE_FLAG_DECODE_POSITION_ENUM_END=129, /* | */ } MAV_MODE_FLAG_DECODE_POSITION; #endif /** @brief Override command, pauses current mission execution and moves immediately to a position */ #ifndef HAVE_ENUM_MAV_GOTO #define HAVE_ENUM_MAV_GOTO typedef enum MAV_GOTO { MAV_GOTO_DO_HOLD=0, /* Hold at the current position. | */ MAV_GOTO_DO_CONTINUE=1, /* Continue with the next item in mission execution. | */ MAV_GOTO_HOLD_AT_CURRENT_POSITION=2, /* Hold at the current position of the system | */ MAV_GOTO_HOLD_AT_SPECIFIED_POSITION=3, /* Hold at the position specified in the parameters of the DO_HOLD action | */ MAV_GOTO_ENUM_END=4, /* | */ } MAV_GOTO; #endif /** @brief These defines are predefined OR-combined mode flags. There is no need to use values from this enum, but it simplifies the use of the mode flags. Note that manual input is enabled in all modes as a safety override. */ #ifndef HAVE_ENUM_MAV_MODE #define HAVE_ENUM_MAV_MODE typedef enum MAV_MODE { MAV_MODE_PREFLIGHT=0, /* System is not ready to fly, booting, calibrating, etc. No flag is set. | */ MAV_MODE_MANUAL_DISARMED=64, /* System is allowed to be active, under manual (RC) control, no stabilization | */ MAV_MODE_TEST_DISARMED=66, /* UNDEFINED mode. This solely depends on the autopilot - use with caution, intended for developers only. | */ MAV_MODE_STABILIZE_DISARMED=80, /* System is allowed to be active, under assisted RC control. | */ MAV_MODE_GUIDED_DISARMED=88, /* System is allowed to be active, under autonomous control, manual setpoint | */ MAV_MODE_AUTO_DISARMED=92, /* System is allowed to be active, under autonomous control and navigation (the trajectory is decided onboard and not pre-programmed by waypoints) | */ MAV_MODE_MANUAL_ARMED=192, /* System is allowed to be active, under manual (RC) control, no stabilization | */ MAV_MODE_TEST_ARMED=194, /* UNDEFINED mode. This solely depends on the autopilot - use with caution, intended for developers only. | */ MAV_MODE_STABILIZE_ARMED=208, /* System is allowed to be active, under assisted RC control. | */ MAV_MODE_GUIDED_ARMED=216, /* System is allowed to be active, under autonomous control, manual setpoint | */ MAV_MODE_AUTO_ARMED=220, /* System is allowed to be active, under autonomous control and navigation (the trajectory is decided onboard and not pre-programmed by waypoints) | */ MAV_MODE_ENUM_END=221, /* | */ } MAV_MODE; #endif /** @brief */ #ifndef HAVE_ENUM_MAV_STATE #define HAVE_ENUM_MAV_STATE typedef enum MAV_STATE { MAV_STATE_UNINIT=0, /* Uninitialized system, state is unknown. | */ MAV_STATE_BOOT=1, /* System is booting up. | */ MAV_STATE_CALIBRATING=2, /* System is calibrating and not flight-ready. | */ MAV_STATE_STANDBY=3, /* System is grounded and on standby. It can be launched any time. | */ MAV_STATE_ACTIVE=4, /* System is active and might be already airborne. Motors are engaged. | */ MAV_STATE_CRITICAL=5, /* System is in a non-normal flight mode. It can however still navigate. | */ MAV_STATE_EMERGENCY=6, /* System is in a non-normal flight mode. It lost control over parts or over the whole airframe. It is in mayday and going down. | */ MAV_STATE_POWEROFF=7, /* System just initialized its power-down sequence, will shut down now. | */ MAV_STATE_FLIGHT_TERMINATION=8, /* System is terminating itself. | */ MAV_STATE_ENUM_END=9, /* | */ } MAV_STATE; #endif /** @brief */ #ifndef HAVE_ENUM_MAV_COMPONENT #define HAVE_ENUM_MAV_COMPONENT typedef enum MAV_COMPONENT { MAV_COMP_ID_ALL=0, /* | */ MAV_COMP_ID_AUTOPILOT1=1, /* | */ MAV_COMP_ID_CAMERA=100, /* | */ MAV_COMP_ID_CAMERA2=101, /* | */ MAV_COMP_ID_CAMERA3=102, /* | */ MAV_COMP_ID_CAMERA4=103, /* | */ MAV_COMP_ID_CAMERA5=104, /* | */ MAV_COMP_ID_CAMERA6=105, /* | */ MAV_COMP_ID_SERVO1=140, /* | */ MAV_COMP_ID_SERVO2=141, /* | */ MAV_COMP_ID_SERVO3=142, /* | */ MAV_COMP_ID_SERVO4=143, /* | */ MAV_COMP_ID_SERVO5=144, /* | */ MAV_COMP_ID_SERVO6=145, /* | */ MAV_COMP_ID_SERVO7=146, /* | */ MAV_COMP_ID_SERVO8=147, /* | */ MAV_COMP_ID_SERVO9=148, /* | */ MAV_COMP_ID_SERVO10=149, /* | */ MAV_COMP_ID_SERVO11=150, /* | */ MAV_COMP_ID_SERVO12=151, /* | */ MAV_COMP_ID_SERVO13=152, /* | */ MAV_COMP_ID_SERVO14=153, /* | */ MAV_COMP_ID_GIMBAL=154, /* | */ MAV_COMP_ID_LOG=155, /* | */ MAV_COMP_ID_ADSB=156, /* | */ MAV_COMP_ID_OSD=157, /* On Screen Display (OSD) devices for video links | */ MAV_COMP_ID_PERIPHERAL=158, /* Generic autopilot peripheral component ID. Meant for devices that do not implement the parameter sub-protocol | */ MAV_COMP_ID_QX1_GIMBAL=159, /* | */ MAV_COMP_ID_MAPPER=180, /* | */ MAV_COMP_ID_MISSIONPLANNER=190, /* | */ MAV_COMP_ID_PATHPLANNER=195, /* | */ MAV_COMP_ID_IMU=200, /* | */ MAV_COMP_ID_IMU_2=201, /* | */ MAV_COMP_ID_IMU_3=202, /* | */ MAV_COMP_ID_GPS=220, /* | */ MAV_COMP_ID_GPS2=221, /* | */ MAV_COMP_ID_UDP_BRIDGE=240, /* | */ MAV_COMP_ID_UART_BRIDGE=241, /* | */ MAV_COMP_ID_SYSTEM_CONTROL=250, /* | */ MAV_COMPONENT_ENUM_END=251, /* | */ } MAV_COMPONENT; #endif /** @brief These encode the sensors whose status is sent as part of the SYS_STATUS message. */ #ifndef HAVE_ENUM_MAV_SYS_STATUS_SENSOR #define HAVE_ENUM_MAV_SYS_STATUS_SENSOR typedef enum MAV_SYS_STATUS_SENSOR { MAV_SYS_STATUS_SENSOR_3D_GYRO=1, /* 0x01 3D gyro | */ MAV_SYS_STATUS_SENSOR_3D_ACCEL=2, /* 0x02 3D accelerometer | */ MAV_SYS_STATUS_SENSOR_3D_MAG=4, /* 0x04 3D magnetometer | */ MAV_SYS_STATUS_SENSOR_ABSOLUTE_PRESSURE=8, /* 0x08 absolute pressure | */ MAV_SYS_STATUS_SENSOR_DIFFERENTIAL_PRESSURE=16, /* 0x10 differential pressure | */ MAV_SYS_STATUS_SENSOR_GPS=32, /* 0x20 GPS | */ MAV_SYS_STATUS_SENSOR_OPTICAL_FLOW=64, /* 0x40 optical flow | */ MAV_SYS_STATUS_SENSOR_VISION_POSITION=128, /* 0x80 computer vision position | */ MAV_SYS_STATUS_SENSOR_LASER_POSITION=256, /* 0x100 laser based position | */ MAV_SYS_STATUS_SENSOR_EXTERNAL_GROUND_TRUTH=512, /* 0x200 external ground truth (Vicon or Leica) | */ MAV_SYS_STATUS_SENSOR_ANGULAR_RATE_CONTROL=1024, /* 0x400 3D angular rate control | */ MAV_SYS_STATUS_SENSOR_ATTITUDE_STABILIZATION=2048, /* 0x800 attitude stabilization | */ MAV_SYS_STATUS_SENSOR_YAW_POSITION=4096, /* 0x1000 yaw position | */ MAV_SYS_STATUS_SENSOR_Z_ALTITUDE_CONTROL=8192, /* 0x2000 z/altitude control | */ MAV_SYS_STATUS_SENSOR_XY_POSITION_CONTROL=16384, /* 0x4000 x/y position control | */ MAV_SYS_STATUS_SENSOR_MOTOR_OUTPUTS=32768, /* 0x8000 motor outputs / control | */ MAV_SYS_STATUS_SENSOR_RC_RECEIVER=65536, /* 0x10000 rc receiver | */ MAV_SYS_STATUS_SENSOR_3D_GYRO2=131072, /* 0x20000 2nd 3D gyro | */ MAV_SYS_STATUS_SENSOR_3D_ACCEL2=262144, /* 0x40000 2nd 3D accelerometer | */ MAV_SYS_STATUS_SENSOR_3D_MAG2=524288, /* 0x80000 2nd 3D magnetometer | */ MAV_SYS_STATUS_GEOFENCE=1048576, /* 0x100000 geofence | */ MAV_SYS_STATUS_AHRS=2097152, /* 0x200000 AHRS subsystem health | */ MAV_SYS_STATUS_TERRAIN=4194304, /* 0x400000 Terrain subsystem health | */ MAV_SYS_STATUS_REVERSE_MOTOR=8388608, /* 0x800000 Motors are reversed | */ MAV_SYS_STATUS_LOGGING=16777216, /* 0x1000000 Logging | */ MAV_SYS_STATUS_SENSOR_BATTERY=33554432, /* 0x2000000 Battery | */ MAV_SYS_STATUS_SENSOR_ENUM_END=33554433, /* | */ } MAV_SYS_STATUS_SENSOR; #endif /** @brief */ #ifndef HAVE_ENUM_MAV_FRAME #define HAVE_ENUM_MAV_FRAME typedef enum MAV_FRAME { MAV_FRAME_GLOBAL=0, /* Global coordinate frame, WGS84 coordinate system. First value / x: latitude, second value / y: longitude, third value / z: positive altitude over mean sea level (MSL) | */ MAV_FRAME_LOCAL_NED=1, /* Local coordinate frame, Z-up (x: north, y: east, z: down). | */ MAV_FRAME_MISSION=2, /* NOT a coordinate frame, indicates a mission command. | */ MAV_FRAME_GLOBAL_RELATIVE_ALT=3, /* Global coordinate frame, WGS84 coordinate system, relative altitude over ground with respect to the home position. First value / x: latitude, second value / y: longitude, third value / z: positive altitude with 0 being at the altitude of the home location. | */ MAV_FRAME_LOCAL_ENU=4, /* Local coordinate frame, Z-down (x: east, y: north, z: up) | */ MAV_FRAME_GLOBAL_INT=5, /* Global coordinate frame, WGS84 coordinate system. First value / x: latitude in degrees*1.0e-7, second value / y: longitude in degrees*1.0e-7, third value / z: positive altitude over mean sea level (MSL) | */ MAV_FRAME_GLOBAL_RELATIVE_ALT_INT=6, /* Global coordinate frame, WGS84 coordinate system, relative altitude over ground with respect to the home position. First value / x: latitude in degrees*10e-7, second value / y: longitude in degrees*10e-7, third value / z: positive altitude with 0 being at the altitude of the home location. | */ MAV_FRAME_LOCAL_OFFSET_NED=7, /* Offset to the current local frame. Anything expressed in this frame should be added to the current local frame position. | */ MAV_FRAME_BODY_NED=8, /* Setpoint in body NED frame. This makes sense if all position control is externalized - e.g. useful to command 2 m/s^2 acceleration to the right. | */ MAV_FRAME_BODY_OFFSET_NED=9, /* Offset in body NED frame. This makes sense if adding setpoints to the current flight path, to avoid an obstacle - e.g. useful to command 2 m/s^2 acceleration to the east. | */ MAV_FRAME_GLOBAL_TERRAIN_ALT=10, /* Global coordinate frame with above terrain level altitude. WGS84 coordinate system, relative altitude over terrain with respect to the waypoint coordinate. First value / x: latitude in degrees, second value / y: longitude in degrees, third value / z: positive altitude in meters with 0 being at ground level in terrain model. | */ MAV_FRAME_GLOBAL_TERRAIN_ALT_INT=11, /* Global coordinate frame with above terrain level altitude. WGS84 coordinate system, relative altitude over terrain with respect to the waypoint coordinate. First value / x: latitude in degrees*10e-7, second value / y: longitude in degrees*10e-7, third value / z: positive altitude in meters with 0 being at ground level in terrain model. | */ MAV_FRAME_ENUM_END=12, /* | */ } MAV_FRAME; #endif /** @brief */ #ifndef HAVE_ENUM_MAVLINK_DATA_STREAM_TYPE #define HAVE_ENUM_MAVLINK_DATA_STREAM_TYPE typedef enum MAVLINK_DATA_STREAM_TYPE { MAVLINK_DATA_STREAM_IMG_JPEG=1, /* | */ MAVLINK_DATA_STREAM_IMG_BMP=2, /* | */ MAVLINK_DATA_STREAM_IMG_RAW8U=3, /* | */ MAVLINK_DATA_STREAM_IMG_RAW32U=4, /* | */ MAVLINK_DATA_STREAM_IMG_PGM=5, /* | */ MAVLINK_DATA_STREAM_IMG_PNG=6, /* | */ MAVLINK_DATA_STREAM_TYPE_ENUM_END=7, /* | */ } MAVLINK_DATA_STREAM_TYPE; #endif /** @brief */ #ifndef HAVE_ENUM_FENCE_ACTION #define HAVE_ENUM_FENCE_ACTION typedef enum FENCE_ACTION { FENCE_ACTION_NONE=0, /* Disable fenced mode | */ FENCE_ACTION_GUIDED=1, /* Switched to guided mode to return point (fence point 0) | */ FENCE_ACTION_REPORT=2, /* Report fence breach, but don't take action | */ FENCE_ACTION_GUIDED_THR_PASS=3, /* Switched to guided mode to return point (fence point 0) with manual throttle control | */ FENCE_ACTION_RTL=4, /* Switch to RTL (return to launch) mode and head for the return point. | */ FENCE_ACTION_ENUM_END=5, /* | */ } FENCE_ACTION; #endif /** @brief */ #ifndef HAVE_ENUM_FENCE_BREACH #define HAVE_ENUM_FENCE_BREACH typedef enum FENCE_BREACH { FENCE_BREACH_NONE=0, /* No last fence breach | */ FENCE_BREACH_MINALT=1, /* Breached minimum altitude | */ FENCE_BREACH_MAXALT=2, /* Breached maximum altitude | */ FENCE_BREACH_BOUNDARY=3, /* Breached fence boundary | */ FENCE_BREACH_ENUM_END=4, /* | */ } FENCE_BREACH; #endif /** @brief Enumeration of possible mount operation modes */ #ifndef HAVE_ENUM_MAV_MOUNT_MODE #define HAVE_ENUM_MAV_MOUNT_MODE typedef enum MAV_MOUNT_MODE { MAV_MOUNT_MODE_RETRACT=0, /* Load and keep safe position (Roll,Pitch,Yaw) from permant memory and stop stabilization | */ MAV_MOUNT_MODE_NEUTRAL=1, /* Load and keep neutral position (Roll,Pitch,Yaw) from permanent memory. | */ MAV_MOUNT_MODE_MAVLINK_TARGETING=2, /* Load neutral position and start MAVLink Roll,Pitch,Yaw control with stabilization | */ MAV_MOUNT_MODE_RC_TARGETING=3, /* Load neutral position and start RC Roll,Pitch,Yaw control with stabilization | */ MAV_MOUNT_MODE_GPS_POINT=4, /* Load neutral position and start to point to Lat,Lon,Alt | */ MAV_MOUNT_MODE_ENUM_END=5, /* | */ } MAV_MOUNT_MODE; #endif /** @brief Generalized UAVCAN node health */ #ifndef HAVE_ENUM_UAVCAN_NODE_HEALTH #define HAVE_ENUM_UAVCAN_NODE_HEALTH typedef enum UAVCAN_NODE_HEALTH { UAVCAN_NODE_HEALTH_OK=0, /* The node is functioning properly. | */ UAVCAN_NODE_HEALTH_WARNING=1, /* A critical parameter went out of range or the node has encountered a minor failure. | */ UAVCAN_NODE_HEALTH_ERROR=2, /* The node has encountered a major failure. | */ UAVCAN_NODE_HEALTH_CRITICAL=3, /* The node has suffered a fatal malfunction. | */ UAVCAN_NODE_HEALTH_ENUM_END=4, /* | */ } UAVCAN_NODE_HEALTH; #endif /** @brief Generalized UAVCAN node mode */ #ifndef HAVE_ENUM_UAVCAN_NODE_MODE #define HAVE_ENUM_UAVCAN_NODE_MODE typedef enum UAVCAN_NODE_MODE { UAVCAN_NODE_MODE_OPERATIONAL=0, /* The node is performing its primary functions. | */ UAVCAN_NODE_MODE_INITIALIZATION=1, /* The node is initializing; this mode is entered immediately after startup. | */ UAVCAN_NODE_MODE_MAINTENANCE=2, /* The node is under maintenance. | */ UAVCAN_NODE_MODE_SOFTWARE_UPDATE=3, /* The node is in the process of updating its software. | */ UAVCAN_NODE_MODE_OFFLINE=7, /* The node is no longer available online. | */ UAVCAN_NODE_MODE_ENUM_END=8, /* | */ } UAVCAN_NODE_MODE; #endif /** @brief Commands to be executed by the MAV. They can be executed on user request, or as part of a mission script. If the action is used in a mission, the parameter mapping to the waypoint/mission message is as follows: Param 1, Param 2, Param 3, Param 4, X: Param 5, Y:Param 6, Z:Param 7. This command list is similar what ARINC 424 is for commercial aircraft: A data format how to interpret waypoint/mission data. */ #ifndef HAVE_ENUM_MAV_CMD #define HAVE_ENUM_MAV_CMD typedef enum MAV_CMD { MAV_CMD_NAV_WAYPOINT=16, /* Navigate to waypoint. |Hold time in decimal seconds. (ignored by fixed wing, time to stay at waypoint for rotary wing)| Acceptance radius in meters (if the sphere with this radius is hit, the waypoint counts as reached)| 0 to pass through the WP, if > 0 radius in meters to pass by WP. Positive value for clockwise orbit, negative value for counter-clockwise orbit. Allows trajectory control.| Desired yaw angle at waypoint (rotary wing). NaN for unchanged.| Latitude| Longitude| Altitude| */ MAV_CMD_NAV_LOITER_UNLIM=17, /* Loiter around this waypoint an unlimited amount of time |Empty| Empty| Radius around waypoint, in meters. If positive loiter clockwise, else counter-clockwise| Desired yaw angle.| Latitude| Longitude| Altitude| */ MAV_CMD_NAV_LOITER_TURNS=18, /* Loiter around this waypoint for X turns |Turns| Empty| Radius around waypoint, in meters. If positive loiter clockwise, else counter-clockwise| Forward moving aircraft this sets exit xtrack location: 0 for center of loiter wp, 1 for exit location. Else, this is desired yaw angle| Latitude| Longitude| Altitude| */ MAV_CMD_NAV_LOITER_TIME=19, /* Loiter around this waypoint for X seconds |Seconds (decimal)| Empty| Radius around waypoint, in meters. If positive loiter clockwise, else counter-clockwise| Forward moving aircraft this sets exit xtrack location: 0 for center of loiter wp, 1 for exit location. Else, this is desired yaw angle| Latitude| Longitude| Altitude| */ MAV_CMD_NAV_RETURN_TO_LAUNCH=20, /* Return to launch location |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_NAV_LAND=21, /* Land at location |Abort Alt| Precision land mode. (0 = normal landing, 1 = opportunistic precision landing, 2 = required precsion landing)| Empty| Desired yaw angle. NaN for unchanged.| Latitude| Longitude| Altitude (ground level)| */ MAV_CMD_NAV_TAKEOFF=22, /* Takeoff from ground / hand |Minimum pitch (if airspeed sensor present), desired pitch without sensor| Empty| Empty| Yaw angle (if magnetometer present), ignored without magnetometer. NaN for unchanged.| Latitude| Longitude| Altitude| */ MAV_CMD_NAV_LAND_LOCAL=23, /* Land at local position (local frame only) |Landing target number (if available)| Maximum accepted offset from desired landing position [m] - computed magnitude from spherical coordinates: d = sqrt(x^2 + y^2 + z^2), which gives the maximum accepted distance between the desired landing position and the position where the vehicle is about to land| Landing descend rate [ms^-1]| Desired yaw angle [rad]| Y-axis position [m]| X-axis position [m]| Z-axis / ground level position [m]| */ MAV_CMD_NAV_TAKEOFF_LOCAL=24, /* Takeoff from local position (local frame only) |Minimum pitch (if airspeed sensor present), desired pitch without sensor [rad]| Empty| Takeoff ascend rate [ms^-1]| Yaw angle [rad] (if magnetometer or another yaw estimation source present), ignored without one of these| Y-axis position [m]| X-axis position [m]| Z-axis position [m]| */ MAV_CMD_NAV_FOLLOW=25, /* Vehicle following, i.e. this waypoint represents the position of a moving vehicle |Following logic to use (e.g. loitering or sinusoidal following) - depends on specific autopilot implementation| Ground speed of vehicle to be followed| Radius around waypoint, in meters. If positive loiter clockwise, else counter-clockwise| Desired yaw angle.| Latitude| Longitude| Altitude| */ MAV_CMD_NAV_CONTINUE_AND_CHANGE_ALT=30, /* Continue on the current course and climb/descend to specified altitude. When the altitude is reached continue to the next command (i.e., don't proceed to the next command until the desired altitude is reached. |Climb or Descend (0 = Neutral, command completes when within 5m of this command's altitude, 1 = Climbing, command completes when at or above this command's altitude, 2 = Descending, command completes when at or below this command's altitude. | Empty| Empty| Empty| Empty| Empty| Desired altitude in meters| */ MAV_CMD_NAV_LOITER_TO_ALT=31, /* Begin loiter at the specified Latitude and Longitude. If Lat=Lon=0, then loiter at the current position. Don't consider the navigation command complete (don't leave loiter) until the altitude has been reached. Additionally, if the Heading Required parameter is non-zero the aircraft will not leave the loiter until heading toward the next waypoint. |Heading Required (0 = False)| Radius in meters. If positive loiter clockwise, negative counter-clockwise, 0 means no change to standard loiter.| Empty| Forward moving aircraft this sets exit xtrack location: 0 for center of loiter wp, 1 for exit location| Latitude| Longitude| Altitude| */ MAV_CMD_DO_FOLLOW=32, /* Being following a target |System ID (the system ID of the FOLLOW_TARGET beacon). Send 0 to disable follow-me and return to the default position hold mode| RESERVED| RESERVED| altitude flag: 0: Keep current altitude, 1: keep altitude difference to target, 2: go to a fixed altitude above home| altitude| RESERVED| TTL in seconds in which the MAV should go to the default position hold mode after a message rx timeout| */ MAV_CMD_DO_FOLLOW_REPOSITION=33, /* Reposition the MAV after a follow target command has been sent |Camera q1 (where 0 is on the ray from the camera to the tracking device)| Camera q2| Camera q3| Camera q4| altitude offset from target (m)| X offset from target (m)| Y offset from target (m)| */ MAV_CMD_NAV_ROI=80, /* THIS INTERFACE IS DEPRECATED AS OF JANUARY 2018. Please use MAV_CMD_DO_SET_ROI_* messages instead. Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| Waypoint index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| x the location of the fixed ROI (see MAV_FRAME)| y| z| */ MAV_CMD_NAV_PATHPLANNING=81, /* Control autonomous path planning on the MAV. |0: Disable local obstacle avoidance / local path planning (without resetting map), 1: Enable local path planning, 2: Enable and reset local path planning| 0: Disable full path planning (without resetting map), 1: Enable, 2: Enable and reset map/occupancy grid, 3: Enable and reset planned route, but not occupancy grid| Empty| Yaw angle at goal, in compass degrees, [0..360]| Latitude/X of goal| Longitude/Y of goal| Altitude/Z of goal| */ MAV_CMD_NAV_SPLINE_WAYPOINT=82, /* Navigate to waypoint using a spline path. |Hold time in decimal seconds. (ignored by fixed wing, time to stay at waypoint for rotary wing)| Empty| Empty| Empty| Latitude/X of goal| Longitude/Y of goal| Altitude/Z of goal| */ MAV_CMD_NAV_VTOL_TAKEOFF=84, /* Takeoff from ground using VTOL mode |Empty| Front transition heading, see VTOL_TRANSITION_HEADING enum.| Empty| Yaw angle in degrees. NaN for unchanged.| Latitude| Longitude| Altitude| */ MAV_CMD_NAV_VTOL_LAND=85, /* Land using VTOL mode |Empty| Empty| Approach altitude (with the same reference as the Altitude field). NaN if unspecified.| Yaw angle in degrees. NaN for unchanged.| Latitude| Longitude| Altitude (ground level)| */ MAV_CMD_NAV_GUIDED_ENABLE=92, /* hand control over to an external controller |On / Off (> 0.5f on)| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_NAV_DELAY=93, /* Delay the next navigation command a number of seconds or until a specified time |Delay in seconds (decimal, -1 to enable time-of-day fields)| hour (24h format, UTC, -1 to ignore)| minute (24h format, UTC, -1 to ignore)| second (24h format, UTC)| Empty| Empty| Empty| */ MAV_CMD_NAV_PAYLOAD_PLACE=94, /* Descend and place payload. Vehicle descends until it detects a hanging payload has reached the ground, the gripper is opened to release the payload |Maximum distance to descend (meters)| Empty| Empty| Empty| Latitude (deg * 1E7)| Longitude (deg * 1E7)| Altitude (meters)| */ MAV_CMD_NAV_LAST=95, /* NOP - This command is only used to mark the upper limit of the NAV/ACTION commands in the enumeration |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_CONDITION_DELAY=112, /* Delay mission state machine. |Delay in seconds (decimal)| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_CONDITION_CHANGE_ALT=113, /* Ascend/descend at rate. Delay mission state machine until desired altitude reached. |Descent / Ascend rate (m/s)| Empty| Empty| Empty| Empty| Empty| Finish Altitude| */ MAV_CMD_CONDITION_DISTANCE=114, /* Delay mission state machine until within desired distance of next NAV point. |Distance (meters)| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_CONDITION_YAW=115, /* Reach a certain target angle. |target angle: [0-360], 0 is north| speed during yaw change:[deg per second]| direction: negative: counter clockwise, positive: clockwise [-1,1]| relative offset or absolute angle: [ 1,0]| Empty| Empty| Empty| */ MAV_CMD_CONDITION_LAST=159, /* NOP - This command is only used to mark the upper limit of the CONDITION commands in the enumeration |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_SET_MODE=176, /* Set system mode. |Mode, as defined by ENUM MAV_MODE| Custom mode - this is system specific, please refer to the individual autopilot specifications for details.| Custom sub mode - this is system specific, please refer to the individual autopilot specifications for details.| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_JUMP=177, /* Jump to the desired command in the mission list. Repeat this action only the specified number of times |Sequence number| Repeat count| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_CHANGE_SPEED=178, /* Change speed and/or throttle set points. |Speed type (0=Airspeed, 1=Ground Speed)| Speed (m/s, -1 indicates no change)| Throttle ( Percent, -1 indicates no change)| absolute or relative [0,1]| Empty| Empty| Empty| */ MAV_CMD_DO_SET_HOME=179, /* Changes the home location either to the current location or a specified location. |Use current (1=use current location, 0=use specified location)| Empty| Empty| Empty| Latitude| Longitude| Altitude| */ MAV_CMD_DO_SET_PARAMETER=180, /* Set a system parameter. Caution! Use of this command requires knowledge of the numeric enumeration value of the parameter. |Parameter number| Parameter value| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_SET_RELAY=181, /* Set a relay to a condition. |Relay number| Setting (1=on, 0=off, others possible depending on system hardware)| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_REPEAT_RELAY=182, /* Cycle a relay on and off for a desired number of cyles with a desired period. |Relay number| Cycle count| Cycle time (seconds, decimal)| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_SET_SERVO=183, /* Set a servo to a desired PWM value. |Servo number| PWM (microseconds, 1000 to 2000 typical)| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_REPEAT_SERVO=184, /* Cycle a between its nominal setting and a desired PWM for a desired number of cycles with a desired period. |Servo number| PWM (microseconds, 1000 to 2000 typical)| Cycle count| Cycle time (seconds)| Empty| Empty| Empty| */ MAV_CMD_DO_FLIGHTTERMINATION=185, /* Terminate flight immediately |Flight termination activated if > 0.5| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_CHANGE_ALTITUDE=186, /* Change altitude set point. |Altitude in meters| Mav frame of new altitude (see MAV_FRAME)| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_LAND_START=189, /* Mission command to perform a landing. This is used as a marker in a mission to tell the autopilot where a sequence of mission items that represents a landing starts. It may also be sent via a COMMAND_LONG to trigger a landing, in which case the nearest (geographically) landing sequence in the mission will be used. The Latitude/Longitude is optional, and may be set to 0 if not needed. If specified then it will be used to help find the closest landing sequence. |Empty| Empty| Empty| Empty| Latitude| Longitude| Empty| */ MAV_CMD_DO_RALLY_LAND=190, /* Mission command to perform a landing from a rally point. |Break altitude (meters)| Landing speed (m/s)| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_GO_AROUND=191, /* Mission command to safely abort an autonmous landing. |Altitude (meters)| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_REPOSITION=192, /* Reposition the vehicle to a specific WGS84 global position. |Ground speed, less than 0 (-1) for default| Bitmask of option flags, see the MAV_DO_REPOSITION_FLAGS enum.| Reserved| Yaw heading, NaN for unchanged. For planes indicates loiter direction (0: clockwise, 1: counter clockwise)| Latitude (deg * 1E7)| Longitude (deg * 1E7)| Altitude (meters)| */ MAV_CMD_DO_PAUSE_CONTINUE=193, /* If in a GPS controlled position mode, hold the current position or continue. |0: Pause current mission or reposition command, hold current position. 1: Continue mission. A VTOL capable vehicle should enter hover mode (multicopter and VTOL planes). A plane should loiter with the default loiter radius.| Reserved| Reserved| Reserved| Reserved| Reserved| Reserved| */ MAV_CMD_DO_SET_REVERSE=194, /* Set moving direction to forward or reverse. |Direction (0=Forward, 1=Reverse)| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_SET_ROI_LOCATION=195, /* Sets the region of interest (ROI) to a location. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Latitude| Longitude| Altitude| */ MAV_CMD_DO_SET_ROI_WPNEXT_OFFSET=196, /* Sets the region of interest (ROI) to be toward next waypoint, with optional pitch/roll/yaw offset. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| pitch offset from next waypoint| roll offset from next waypoint| yaw offset from next waypoint| */ MAV_CMD_DO_SET_ROI_NONE=197, /* Cancels any previous ROI command returning the vehicle/sensors to default flight characteristics. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_CONTROL_VIDEO=200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds (decimal)| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty| */ MAV_CMD_DO_SET_ROI=201, /* THIS INTERFACE IS DEPRECATED AS OF JANUARY 2018. Please use MAV_CMD_DO_SET_ROI_* messages instead. Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of intereset mode. (see MAV_ROI enum)| Waypoint index/ target ID. (see MAV_ROI enum)| ROI index (allows a vehicle to manage multiple ROI's)| Empty| MAV_ROI_WPNEXT: pitch offset from next waypoint, MAV_ROI_LOCATION: latitude| MAV_ROI_WPNEXT: roll offset from next waypoint, MAV_ROI_LOCATION: longitude| MAV_ROI_WPNEXT: yaw offset from next waypoint, MAV_ROI_LOCATION: altitude| */ MAV_CMD_DO_DIGICAM_CONFIGURE=202, /* THIS INTERFACE IS DEPRECATED since 2018-01. Please use PARAM_EXT_XXX messages and the camera definition format described in https://mavlink.io/en/protocol/camera_def.html. |Modes: P, TV, AV, M, Etc| Shutter speed: Divisor number for one second| Aperture: F stop number| ISO number e.g. 80, 100, 200, Etc| Exposure type enumerator| Command Identity| Main engine cut-off time before camera trigger in seconds/10 (0 means no cut-off)| */ MAV_CMD_DO_DIGICAM_CONTROL=203, /* THIS INTERFACE IS DEPRECATED since 2018-01. Please use PARAM_EXT_XXX messages and the camera definition format described in https://mavlink.io/en/protocol/camera_def.html. |Session control e.g. show/hide lens| Zoom's absolute position| Zooming step value to offset zoom from the current position| Focus Locking, Unlocking or Re-locking| Shooting Command| Command Identity| Test shot identifier. If set to 1, image will only be captured, but not counted towards internal frame count.| */ MAV_CMD_DO_MOUNT_CONFIGURE=204, /* Mission command to configure a camera or antenna mount |Mount operation mode (see MAV_MOUNT_MODE enum)| stabilize roll? (1 = yes, 0 = no)| stabilize pitch? (1 = yes, 0 = no)| stabilize yaw? (1 = yes, 0 = no)| roll input (0 = angle, 1 = angular rate)| pitch input (0 = angle, 1 = angular rate)| yaw input (0 = angle, 1 = angular rate)| */ MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch depending on mount mode (degrees or degrees/second depending on pitch input).| roll depending on mount mode (degrees or degrees/second depending on roll input).| yaw depending on mount mode (degrees or degrees/second depending on yaw input).| alt in meters depending on mount mode.| latitude in degrees * 1E7, set if appropriate mount mode.| longitude in degrees * 1E7, set if appropriate mount mode.| MAV_MOUNT_MODE enum value| */ MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set camera trigger distance for this flight. The camera is trigerred each time this distance is exceeded. This command can also be used to set the shutter integration time for the camera. |Camera trigger distance (meters). 0 to stop triggering.| Camera shutter integration time (milliseconds). -1 or 0 to ignore| Trigger camera once immediately. (0 = no trigger, 1 = trigger)| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_FENCE_ENABLE=207, /* Mission command to enable the geofence |enable? (0=disable, 1=enable, 2=disable_floor_only)| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_PARACHUTE=208, /* Mission command to trigger a parachute |action (0=disable, 1=enable, 2=release, for some systems see PARACHUTE_ACTION enum, not in general message set.)| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_MOTOR_TEST=209, /* Mission command to perform motor test |motor number (a number from 1 to max number of motors on the vehicle)| throttle type (0=throttle percentage, 1=PWM, 2=pilot throttle channel pass-through. See MOTOR_TEST_THROTTLE_TYPE enum)| throttle| timeout (in seconds)| motor count (number of motors to test to test in sequence, waiting for the timeout above between them; 0=1 motor, 1=1 motor, 2=2 motors...)| motor test order (See MOTOR_TEST_ORDER enum)| Empty| */ MAV_CMD_DO_INVERTED_FLIGHT=210, /* Change to/from inverted flight |inverted (0=normal, 1=inverted)| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_NAV_SET_YAW_SPEED=213, /* Sets a desired vehicle turn angle and speed change |yaw angle to adjust steering by in centidegress| speed - normalized to 0 .. 1| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_SET_CAM_TRIGG_INTERVAL=214, /* Mission command to set camera trigger interval for this flight. If triggering is enabled, the camera is triggered each time this interval expires. This command can also be used to set the shutter integration time for the camera. |Camera trigger cycle time (milliseconds). -1 or 0 to ignore.| Camera shutter integration time (milliseconds). Should be less than trigger cycle time. -1 or 0 to ignore.| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_MOUNT_CONTROL_QUAT=220, /* Mission command to control a camera or antenna mount, using a quaternion as reference. |q1 - quaternion param #1, w (1 in null-rotation)| q2 - quaternion param #2, x (0 in null-rotation)| q3 - quaternion param #3, y (0 in null-rotation)| q4 - quaternion param #4, z (0 in null-rotation)| Empty| Empty| Empty| */ MAV_CMD_DO_GUIDED_MASTER=221, /* set id of master controller |System ID| Component ID| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_GUIDED_LIMITS=222, /* set limits for external control |timeout - maximum time (in seconds) that external controller will be allowed to control vehicle. 0 means no timeout| absolute altitude min (in meters, AMSL) - if vehicle moves below this alt, the command will be aborted and the mission will continue. 0 means no lower altitude limit| absolute altitude max (in meters)- if vehicle moves above this alt, the command will be aborted and the mission will continue. 0 means no upper altitude limit| horizontal move limit (in meters, AMSL) - if vehicle moves more than this distance from it's location at the moment the command was executed, the command will be aborted and the mission will continue. 0 means no horizontal altitude limit| Empty| Empty| Empty| */ MAV_CMD_DO_ENGINE_CONTROL=223, /* Control vehicle engine. This is interpreted by the vehicles engine controller to change the target engine state. It is intended for vehicles with internal combustion engines |0: Stop engine, 1:Start Engine| 0: Warm start, 1:Cold start. Controls use of choke where applicable| Height delay (meters). This is for commanding engine start only after the vehicle has gained the specified height. Used in VTOL vehicles during takeoff to start engine after the aircraft is off the ground. Zero for no delay.| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_LAST=240, /* NOP - This command is only used to mark the upper limit of the DO commands in the enumeration |Empty| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_PREFLIGHT_CALIBRATION=241, /* Trigger calibration. This command will be only accepted if in pre-flight mode. Except for Temperature Calibration, only one sensor should be set in a single message and all others should be zero. |1: gyro calibration, 3: gyro temperature calibration| 1: magnetometer calibration| 1: ground pressure calibration| 1: radio RC calibration, 2: RC trim calibration| 1: accelerometer calibration, 2: board level calibration, 3: accelerometer temperature calibration, 4: simple accelerometer calibration| 1: APM: compass/motor interference calibration (PX4: airspeed calibration, deprecated), 2: airspeed calibration| 1: ESC calibration, 3: barometer temperature calibration| */ MAV_CMD_PREFLIGHT_SET_SENSOR_OFFSETS=242, /* Set sensor offsets. This command will be only accepted if in pre-flight mode. |Sensor to adjust the offsets for: 0: gyros, 1: accelerometer, 2: magnetometer, 3: barometer, 4: optical flow, 5: second magnetometer, 6: third magnetometer| X axis offset (or generic dimension 1), in the sensor's raw units| Y axis offset (or generic dimension 2), in the sensor's raw units| Z axis offset (or generic dimension 3), in the sensor's raw units| Generic dimension 4, in the sensor's raw units| Generic dimension 5, in the sensor's raw units| Generic dimension 6, in the sensor's raw units| */ MAV_CMD_PREFLIGHT_UAVCAN=243, /* Trigger UAVCAN config. This command will be only accepted if in pre-flight mode. |1: Trigger actuator ID assignment and direction mapping.| Reserved| Reserved| Reserved| Reserved| Reserved| Reserved| */ MAV_CMD_PREFLIGHT_STORAGE=245, /* Request storage of different parameter values and logs. This command will be only accepted if in pre-flight mode. |Parameter storage: 0: READ FROM FLASH/EEPROM, 1: WRITE CURRENT TO FLASH/EEPROM, 2: Reset to defaults| Mission storage: 0: READ FROM FLASH/EEPROM, 1: WRITE CURRENT TO FLASH/EEPROM, 2: Reset to defaults| Onboard logging: 0: Ignore, 1: Start default rate logging, -1: Stop logging, > 1: start logging with rate of param 3 in Hz (e.g. set to 1000 for 1000 Hz logging)| Reserved| Empty| Empty| Empty| */ MAV_CMD_PREFLIGHT_REBOOT_SHUTDOWN=246, /* Request the reboot or shutdown of system components. |0: Do nothing for autopilot, 1: Reboot autopilot, 2: Shutdown autopilot, 3: Reboot autopilot and keep it in the bootloader until upgraded.| 0: Do nothing for onboard computer, 1: Reboot onboard computer, 2: Shutdown onboard computer, 3: Reboot onboard computer and keep it in the bootloader until upgraded.| WIP: 0: Do nothing for camera, 1: Reboot onboard camera, 2: Shutdown onboard camera, 3: Reboot onboard camera and keep it in the bootloader until upgraded| WIP: 0: Do nothing for mount (e.g. gimbal), 1: Reboot mount, 2: Shutdown mount, 3: Reboot mount and keep it in the bootloader until upgraded| Reserved, send 0| Reserved, send 0| WIP: ID (e.g. camera ID -1 for all IDs)| */ MAV_CMD_OVERRIDE_GOTO=252, /* Hold / continue the current action |MAV_GOTO_DO_HOLD: hold MAV_GOTO_DO_CONTINUE: continue with next item in mission plan| MAV_GOTO_HOLD_AT_CURRENT_POSITION: Hold at current position MAV_GOTO_HOLD_AT_SPECIFIED_POSITION: hold at specified position| MAV_FRAME coordinate frame of hold point| Desired yaw angle in degrees| Latitude / X position| Longitude / Y position| Altitude / Z position| */ MAV_CMD_MISSION_START=300, /* start running a mission |first_item: the first mission item to run| last_item: the last mission item to run (after this item is run, the mission ends)| */ MAV_CMD_COMPONENT_ARM_DISARM=400, /* Arms / Disarms a component |1 to arm, 0 to disarm| */ MAV_CMD_GET_HOME_POSITION=410, /* Request the home position from the vehicle. |Reserved| Reserved| Reserved| Reserved| Reserved| Reserved| Reserved| */ MAV_CMD_START_RX_PAIR=500, /* Starts receiver pairing |0:Spektrum| 0:Spektrum DSM2, 1:Spektrum DSMX| */ MAV_CMD_GET_MESSAGE_INTERVAL=510, /* Request the interval between messages for a particular MAVLink message ID |The MAVLink message ID| */ MAV_CMD_SET_MESSAGE_INTERVAL=511, /* Request the interval between messages for a particular MAVLink message ID. This interface replaces REQUEST_DATA_STREAM |The MAVLink message ID| The interval between two messages, in microseconds. Set to -1 to disable and 0 to request default rate.| */ MAV_CMD_REQUEST_PROTOCOL_VERSION=519, /* Request MAVLink protocol version compatibility |1: Request supported protocol versions by all nodes on the network| Reserved (all remaining params)| */ MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES=520, /* Request autopilot capabilities |1: Request autopilot version| Reserved (all remaining params)| */ MAV_CMD_REQUEST_CAMERA_INFORMATION=521, /* Request camera information (CAMERA_INFORMATION). |0: No action 1: Request camera capabilities| Reserved (all remaining params)| */ MAV_CMD_REQUEST_CAMERA_SETTINGS=522, /* Request camera settings (CAMERA_SETTINGS). |0: No Action 1: Request camera settings| Reserved (all remaining params)| */ MAV_CMD_REQUEST_STORAGE_INFORMATION=525, /* WIP: Request storage information (STORAGE_INFORMATION). Use the command's target_component to target a specific component's storage. |Storage ID (0 for all, 1 for first, 2 for second, etc.)| 0: No Action 1: Request storage information| Reserved (all remaining params)| */ MAV_CMD_STORAGE_FORMAT=526, /* WIP: Format a storage medium. Once format is complete, a STORAGE_INFORMATION message is sent. Use the command's target_component to target a specific component's storage. |Storage ID (1 for first, 2 for second, etc.)| 0: No action 1: Format storage| Reserved (all remaining params)| */ MAV_CMD_REQUEST_CAMERA_CAPTURE_STATUS=527, /* Request camera capture status (CAMERA_CAPTURE_STATUS) |0: No Action 1: Request camera capture status| Reserved (all remaining params)| */ MAV_CMD_REQUEST_FLIGHT_INFORMATION=528, /* WIP: Request flight information (FLIGHT_INFORMATION) |1: Request flight information| Reserved (all remaining params)| */ MAV_CMD_RESET_CAMERA_SETTINGS=529, /* Reset all camera settings to Factory Default |0: No Action 1: Reset all settings| Reserved (all remaining params)| */ MAV_CMD_SET_CAMERA_MODE=530, /* Set camera running mode. Use NAN for reserved values. |Reserved (Set to 0)| Camera mode (see CAMERA_MODE enum)| Reserved (all remaining params)| */ MAV_CMD_IMAGE_START_CAPTURE=2000, /* Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. Use NAN for reserved values. |Reserved (Set to 0)| Duration between two consecutive pictures (in seconds)| Number of images to capture total - 0 for unlimited capture| Reserved (all remaining params)| */ MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* Stop image capture sequence Use NAN for reserved values. |Reserved (Set to 0)| Reserved (all remaining params)| */ MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* WIP: Re-request a CAMERA_IMAGE_CAPTURE packet. Use NAN for reserved values. |Sequence number for missing CAMERA_IMAGE_CAPTURE packet| Reserved (all remaining params)| */ MAV_CMD_DO_TRIGGER_CONTROL=2003, /* Enable or disable on-board camera triggering system. |Trigger enable/disable (0 for disable, 1 for start), -1 to ignore| 1 to reset the trigger sequence, -1 or 0 to ignore| 1 to pause triggering, but without switching the camera off or retracting it. -1 to ignore| */ MAV_CMD_VIDEO_START_CAPTURE=2500, /* Starts video capture (recording). Use NAN for reserved values. |Reserved (Set to 0)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise frequency in Hz)| Reserved (all remaining params)| */ MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* Stop the current video capture (recording). Use NAN for reserved values. |Reserved (Set to 0)| Reserved (all remaining params)| */ MAV_CMD_VIDEO_START_STREAMING=2502, /* WIP: Start video streaming |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Reserved| */ MAV_CMD_VIDEO_STOP_STREAMING=2503, /* WIP: Stop the current video streaming |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Reserved| */ MAV_CMD_REQUEST_VIDEO_STREAM_INFORMATION=2504, /* WIP: Request video stream information (VIDEO_STREAM_INFORMATION) |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| 0: No Action 1: Request video stream information| Reserved (all remaining params)| */ MAV_CMD_LOGGING_START=2510, /* Request to start streaming logging data over MAVLink (see also LOGGING_DATA message) |Format: 0: ULog| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| */ MAV_CMD_LOGGING_STOP=2511, /* Request to stop streaming log data over MAVLink |Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| */ MAV_CMD_AIRFRAME_CONFIGURATION=2520, /* |Landing gear ID (default: 0, -1 for all)| Landing gear position (Down: 0, Up: 1, NAN for no change)| Reserved, set to NAN| Reserved, set to NAN| Reserved, set to NAN| Reserved, set to NAN| Reserved, set to NAN| */ MAV_CMD_PANORAMA_CREATE=2800, /* Create a panorama at the current position |Viewing angle horizontal of the panorama (in degrees, +- 0.5 the total angle)| Viewing angle vertical of panorama (in degrees)| Speed of the horizontal rotation (in degrees per second)| Speed of the vertical rotation (in degrees per second)| */ MAV_CMD_DO_VTOL_TRANSITION=3000, /* Request VTOL transition |The target VTOL state, as defined by ENUM MAV_VTOL_STATE. Only MAV_VTOL_STATE_MC and MAV_VTOL_STATE_FW can be used.| */ MAV_CMD_ARM_AUTHORIZATION_REQUEST=3001, /* Request authorization to arm the vehicle to a external entity, the arm authorizer is resposible to request all data that is needs from the vehicle before authorize or deny the request. If approved the progress of command_ack message should be set with period of time that this authorization is valid in seconds or in case it was denied it should be set with one of the reasons in ARM_AUTH_DENIED_REASON. |Vehicle system id, this way ground station can request arm authorization on behalf of any vehicle| */ MAV_CMD_SET_GUIDED_SUBMODE_STANDARD=4000, /* This command sets the submode to standard guided when vehicle is in guided mode. The vehicle holds position and altitude and the user can input the desired velocites along all three axes. | */ MAV_CMD_SET_GUIDED_SUBMODE_CIRCLE=4001, /* This command sets submode circle when vehicle is in guided mode. Vehicle flies along a circle facing the center of the circle. The user can input the velocity along the circle and change the radius. If no input is given the vehicle will hold position. |Radius of desired circle in CIRCLE_MODE| User defined| User defined| User defined| Unscaled target latitude of center of circle in CIRCLE_MODE| Unscaled target longitude of center of circle in CIRCLE_MODE| */ MAV_CMD_CONDITION_GATE=4501, /* WIP: Delay mission state machine until gate has been reached. |Geometry: 0: orthogonal to path between previous and next waypoint.| Altitude: 0: ignore altitude| Empty| Empty| Latitude| Longitude| Altitude| */ MAV_CMD_NAV_FENCE_RETURN_POINT=5000, /* Fence return point. There can only be one fence return point. |Reserved| Reserved| Reserved| Reserved| Latitude| Longitude| Altitude| */ MAV_CMD_NAV_FENCE_POLYGON_VERTEX_INCLUSION=5001, /* Fence vertex for an inclusion polygon (the polygon must not be self-intersecting). The vehicle must stay within this area. Minimum of 3 vertices required. |Polygon vertex count| Reserved| Reserved| Reserved| Latitude| Longitude| Reserved| */ MAV_CMD_NAV_FENCE_POLYGON_VERTEX_EXCLUSION=5002, /* Fence vertex for an exclusion polygon (the polygon must not be self-intersecting). The vehicle must stay outside this area. Minimum of 3 vertices required. |Polygon vertex count| Reserved| Reserved| Reserved| Latitude| Longitude| Reserved| */ MAV_CMD_NAV_FENCE_CIRCLE_INCLUSION=5003, /* Circular fence area. The vehicle must stay inside this area. |radius in meters| Reserved| Reserved| Reserved| Latitude| Longitude| Reserved| */ MAV_CMD_NAV_FENCE_CIRCLE_EXCLUSION=5004, /* Circular fence area. The vehicle must stay outside this area. |radius in meters| Reserved| Reserved| Reserved| Latitude| Longitude| Reserved| */ MAV_CMD_NAV_RALLY_POINT=5100, /* Rally point. You can have multiple rally points defined. |Reserved| Reserved| Reserved| Reserved| Latitude| Longitude| Altitude| */ MAV_CMD_UAVCAN_GET_NODE_INFO=5200, /* Commands the vehicle to respond with a sequence of messages UAVCAN_NODE_INFO, one message per every UAVCAN node that is online. Note that some of the response messages can be lost, which the receiver can detect easily by checking whether every received UAVCAN_NODE_STATUS has a matching message UAVCAN_NODE_INFO received earlier; if not, this command should be sent again in order to request re-transmission of the node information messages. |Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| Reserved (set to 0)| */ MAV_CMD_PAYLOAD_PREPARE_DEPLOY=30001, /* Deploy payload on a Lat / Lon / Alt position. This includes the navigation to reach the required release position and velocity. |Operation mode. 0: prepare single payload deploy (overwriting previous requests), but do not execute it. 1: execute payload deploy immediately (rejecting further deploy commands during execution, but allowing abort). 2: add payload deploy to existing deployment list.| Desired approach vector in degrees compass heading (0..360). A negative value indicates the system can define the approach vector at will.| Desired ground speed at release time. This can be overriden by the airframe in case it needs to meet minimum airspeed. A negative value indicates the system can define the ground speed at will.| Minimum altitude clearance to the release position in meters. A negative value indicates the system can define the clearance at will.| Latitude unscaled for MISSION_ITEM or in 1e7 degrees for MISSION_ITEM_INT| Longitude unscaled for MISSION_ITEM or in 1e7 degrees for MISSION_ITEM_INT| Altitude, in meters AMSL| */ MAV_CMD_PAYLOAD_CONTROL_DEPLOY=30002, /* Control the payload deployment. |Operation mode. 0: Abort deployment, continue normal mission. 1: switch to payload deploment mode. 100: delete first payload deployment request. 101: delete all payload deployment requests.| Reserved| Reserved| Reserved| Reserved| Reserved| Reserved| */ MAV_CMD_WAYPOINT_USER_1=31000, /* User defined waypoint item. Ground Station will show the Vehicle as flying through this item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude, in meters AMSL| */ MAV_CMD_WAYPOINT_USER_2=31001, /* User defined waypoint item. Ground Station will show the Vehicle as flying through this item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude, in meters AMSL| */ MAV_CMD_WAYPOINT_USER_3=31002, /* User defined waypoint item. Ground Station will show the Vehicle as flying through this item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude, in meters AMSL| */ MAV_CMD_WAYPOINT_USER_4=31003, /* User defined waypoint item. Ground Station will show the Vehicle as flying through this item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude, in meters AMSL| */ MAV_CMD_WAYPOINT_USER_5=31004, /* User defined waypoint item. Ground Station will show the Vehicle as flying through this item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude, in meters AMSL| */ MAV_CMD_SPATIAL_USER_1=31005, /* User defined spatial item. Ground Station will not show the Vehicle as flying through this item. Example: ROI item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude, in meters AMSL| */ MAV_CMD_SPATIAL_USER_2=31006, /* User defined spatial item. Ground Station will not show the Vehicle as flying through this item. Example: ROI item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude, in meters AMSL| */ MAV_CMD_SPATIAL_USER_3=31007, /* User defined spatial item. Ground Station will not show the Vehicle as flying through this item. Example: ROI item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude, in meters AMSL| */ MAV_CMD_SPATIAL_USER_4=31008, /* User defined spatial item. Ground Station will not show the Vehicle as flying through this item. Example: ROI item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude, in meters AMSL| */ MAV_CMD_SPATIAL_USER_5=31009, /* User defined spatial item. Ground Station will not show the Vehicle as flying through this item. Example: ROI item. |User defined| User defined| User defined| User defined| Latitude unscaled| Longitude unscaled| Altitude, in meters AMSL| */ MAV_CMD_USER_1=31010, /* User defined command. Ground Station will not show the Vehicle as flying through this item. Example: MAV_CMD_DO_SET_PARAMETER item. |User defined| User defined| User defined| User defined| User defined| User defined| User defined| */ MAV_CMD_USER_2=31011, /* User defined command. Ground Station will not show the Vehicle as flying through this item. Example: MAV_CMD_DO_SET_PARAMETER item. |User defined| User defined| User defined| User defined| User defined| User defined| User defined| */ MAV_CMD_USER_3=31012, /* User defined command. Ground Station will not show the Vehicle as flying through this item. Example: MAV_CMD_DO_SET_PARAMETER item. |User defined| User defined| User defined| User defined| User defined| User defined| User defined| */ MAV_CMD_USER_4=31013, /* User defined command. Ground Station will not show the Vehicle as flying through this item. Example: MAV_CMD_DO_SET_PARAMETER item. |User defined| User defined| User defined| User defined| User defined| User defined| User defined| */ MAV_CMD_USER_5=31014, /* User defined command. Ground Station will not show the Vehicle as flying through this item. Example: MAV_CMD_DO_SET_PARAMETER item. |User defined| User defined| User defined| User defined| User defined| User defined| User defined| */ MAV_CMD_ENUM_END=31015, /* | */ } MAV_CMD; #endif /** @brief THIS INTERFACE IS DEPRECATED AS OF JULY 2015. Please use MESSAGE_INTERVAL instead. A data stream is not a fixed set of messages, but rather a recommendation to the autopilot software. Individual autopilots may or may not obey the recommended messages. */ #ifndef HAVE_ENUM_MAV_DATA_STREAM #define HAVE_ENUM_MAV_DATA_STREAM typedef enum MAV_DATA_STREAM { MAV_DATA_STREAM_ALL=0, /* Enable all data streams | */ MAV_DATA_STREAM_RAW_SENSORS=1, /* Enable IMU_RAW, GPS_RAW, GPS_STATUS packets. | */ MAV_DATA_STREAM_EXTENDED_STATUS=2, /* Enable GPS_STATUS, CONTROL_STATUS, AUX_STATUS | */ MAV_DATA_STREAM_RC_CHANNELS=3, /* Enable RC_CHANNELS_SCALED, RC_CHANNELS_RAW, SERVO_OUTPUT_RAW | */ MAV_DATA_STREAM_RAW_CONTROLLER=4, /* Enable ATTITUDE_CONTROLLER_OUTPUT, POSITION_CONTROLLER_OUTPUT, NAV_CONTROLLER_OUTPUT. | */ MAV_DATA_STREAM_POSITION=6, /* Enable LOCAL_POSITION, GLOBAL_POSITION/GLOBAL_POSITION_INT messages. | */ MAV_DATA_STREAM_EXTRA1=10, /* Dependent on the autopilot | */ MAV_DATA_STREAM_EXTRA2=11, /* Dependent on the autopilot | */ MAV_DATA_STREAM_EXTRA3=12, /* Dependent on the autopilot | */ MAV_DATA_STREAM_ENUM_END=13, /* | */ } MAV_DATA_STREAM; #endif /** @brief THIS INTERFACE IS DEPRECATED AS OF JANUARY 2018. Please use MAV_CMD_DO_SET_ROI_* messages instead. The ROI (region of interest) for the vehicle. This can be be used by the vehicle for camera/vehicle attitude alignment (see MAV_CMD_NAV_ROI). */ #ifndef HAVE_ENUM_MAV_ROI #define HAVE_ENUM_MAV_ROI typedef enum MAV_ROI { MAV_ROI_NONE=0, /* No region of interest. | */ MAV_ROI_WPNEXT=1, /* Point toward next waypoint, with optional pitch/roll/yaw offset. | */ MAV_ROI_WPINDEX=2, /* Point toward given waypoint. | */ MAV_ROI_LOCATION=3, /* Point toward fixed location. | */ MAV_ROI_TARGET=4, /* Point toward of given id. | */ MAV_ROI_ENUM_END=5, /* | */ } MAV_ROI; #endif /** @brief ACK / NACK / ERROR values as a result of MAV_CMDs and for mission item transmission. */ #ifndef HAVE_ENUM_MAV_CMD_ACK #define HAVE_ENUM_MAV_CMD_ACK typedef enum MAV_CMD_ACK { MAV_CMD_ACK_OK=1, /* Command / mission item is ok. | */ MAV_CMD_ACK_ERR_FAIL=2, /* Generic error message if none of the other reasons fails or if no detailed error reporting is implemented. | */ MAV_CMD_ACK_ERR_ACCESS_DENIED=3, /* The system is refusing to accept this command from this source / communication partner. | */ MAV_CMD_ACK_ERR_NOT_SUPPORTED=4, /* Command or mission item is not supported, other commands would be accepted. | */ MAV_CMD_ACK_ERR_COORDINATE_FRAME_NOT_SUPPORTED=5, /* The coordinate frame of this command / mission item is not supported. | */ MAV_CMD_ACK_ERR_COORDINATES_OUT_OF_RANGE=6, /* The coordinate frame of this command is ok, but he coordinate values exceed the safety limits of this system. This is a generic error, please use the more specific error messages below if possible. | */ MAV_CMD_ACK_ERR_X_LAT_OUT_OF_RANGE=7, /* The X or latitude value is out of range. | */ MAV_CMD_ACK_ERR_Y_LON_OUT_OF_RANGE=8, /* The Y or longitude value is out of range. | */ MAV_CMD_ACK_ERR_Z_ALT_OUT_OF_RANGE=9, /* The Z or altitude value is out of range. | */ MAV_CMD_ACK_ENUM_END=10, /* | */ } MAV_CMD_ACK; #endif /** @brief Specifies the datatype of a MAVLink parameter. */ #ifndef HAVE_ENUM_MAV_PARAM_TYPE #define HAVE_ENUM_MAV_PARAM_TYPE typedef enum MAV_PARAM_TYPE { MAV_PARAM_TYPE_UINT8=1, /* 8-bit unsigned integer | */ MAV_PARAM_TYPE_INT8=2, /* 8-bit signed integer | */ MAV_PARAM_TYPE_UINT16=3, /* 16-bit unsigned integer | */ MAV_PARAM_TYPE_INT16=4, /* 16-bit signed integer | */ MAV_PARAM_TYPE_UINT32=5, /* 32-bit unsigned integer | */ MAV_PARAM_TYPE_INT32=6, /* 32-bit signed integer | */ MAV_PARAM_TYPE_UINT64=7, /* 64-bit unsigned integer | */ MAV_PARAM_TYPE_INT64=8, /* 64-bit signed integer | */ MAV_PARAM_TYPE_REAL32=9, /* 32-bit floating-point | */ MAV_PARAM_TYPE_REAL64=10, /* 64-bit floating-point | */ MAV_PARAM_TYPE_ENUM_END=11, /* | */ } MAV_PARAM_TYPE; #endif /** @brief Specifies the datatype of a MAVLink extended parameter. */ #ifndef HAVE_ENUM_MAV_PARAM_EXT_TYPE #define HAVE_ENUM_MAV_PARAM_EXT_TYPE typedef enum MAV_PARAM_EXT_TYPE { MAV_PARAM_EXT_TYPE_UINT8=1, /* 8-bit unsigned integer | */ MAV_PARAM_EXT_TYPE_INT8=2, /* 8-bit signed integer | */ MAV_PARAM_EXT_TYPE_UINT16=3, /* 16-bit unsigned integer | */ MAV_PARAM_EXT_TYPE_INT16=4, /* 16-bit signed integer | */ MAV_PARAM_EXT_TYPE_UINT32=5, /* 32-bit unsigned integer | */ MAV_PARAM_EXT_TYPE_INT32=6, /* 32-bit signed integer | */ MAV_PARAM_EXT_TYPE_UINT64=7, /* 64-bit unsigned integer | */ MAV_PARAM_EXT_TYPE_INT64=8, /* 64-bit signed integer | */ MAV_PARAM_EXT_TYPE_REAL32=9, /* 32-bit floating-point | */ MAV_PARAM_EXT_TYPE_REAL64=10, /* 64-bit floating-point | */ MAV_PARAM_EXT_TYPE_CUSTOM=11, /* Custom Type | */ MAV_PARAM_EXT_TYPE_ENUM_END=12, /* | */ } MAV_PARAM_EXT_TYPE; #endif /** @brief result from a mavlink command */ #ifndef HAVE_ENUM_MAV_RESULT #define HAVE_ENUM_MAV_RESULT typedef enum MAV_RESULT { MAV_RESULT_ACCEPTED=0, /* Command ACCEPTED and EXECUTED | */ MAV_RESULT_TEMPORARILY_REJECTED=1, /* Command TEMPORARY REJECTED/DENIED | */ MAV_RESULT_DENIED=2, /* Command PERMANENTLY DENIED | */ MAV_RESULT_UNSUPPORTED=3, /* Command UNKNOWN/UNSUPPORTED | */ MAV_RESULT_FAILED=4, /* Command executed, but failed | */ MAV_RESULT_IN_PROGRESS=5, /* WIP: Command being executed | */ MAV_RESULT_ENUM_END=6, /* | */ } MAV_RESULT; #endif /** @brief result in a mavlink mission ack */ #ifndef HAVE_ENUM_MAV_MISSION_RESULT #define HAVE_ENUM_MAV_MISSION_RESULT typedef enum MAV_MISSION_RESULT { MAV_MISSION_ACCEPTED=0, /* mission accepted OK | */ MAV_MISSION_ERROR=1, /* generic error / not accepting mission commands at all right now | */ MAV_MISSION_UNSUPPORTED_FRAME=2, /* coordinate frame is not supported | */ MAV_MISSION_UNSUPPORTED=3, /* command is not supported | */ MAV_MISSION_NO_SPACE=4, /* mission item exceeds storage space | */ MAV_MISSION_INVALID=5, /* one of the parameters has an invalid value | */ MAV_MISSION_INVALID_PARAM1=6, /* param1 has an invalid value | */ MAV_MISSION_INVALID_PARAM2=7, /* param2 has an invalid value | */ MAV_MISSION_INVALID_PARAM3=8, /* param3 has an invalid value | */ MAV_MISSION_INVALID_PARAM4=9, /* param4 has an invalid value | */ MAV_MISSION_INVALID_PARAM5_X=10, /* x/param5 has an invalid value | */ MAV_MISSION_INVALID_PARAM6_Y=11, /* y/param6 has an invalid value | */ MAV_MISSION_INVALID_PARAM7=12, /* param7 has an invalid value | */ MAV_MISSION_INVALID_SEQUENCE=13, /* received waypoint out of sequence | */ MAV_MISSION_DENIED=14, /* not accepting any mission commands from this communication partner | */ MAV_MISSION_RESULT_ENUM_END=15, /* | */ } MAV_MISSION_RESULT; #endif /** @brief Indicates the severity level, generally used for status messages to indicate their relative urgency. Based on RFC-5424 using expanded definitions at: http://www.kiwisyslog.com/kb/info:-syslog-message-levels/. */ #ifndef HAVE_ENUM_MAV_SEVERITY #define HAVE_ENUM_MAV_SEVERITY typedef enum MAV_SEVERITY { MAV_SEVERITY_EMERGENCY=0, /* System is unusable. This is a "panic" condition. | */ MAV_SEVERITY_ALERT=1, /* Action should be taken immediately. Indicates error in non-critical systems. | */ MAV_SEVERITY_CRITICAL=2, /* Action must be taken immediately. Indicates failure in a primary system. | */ MAV_SEVERITY_ERROR=3, /* Indicates an error in secondary/redundant systems. | */ MAV_SEVERITY_WARNING=4, /* Indicates about a possible future error if this is not resolved within a given timeframe. Example would be a low battery warning. | */ MAV_SEVERITY_NOTICE=5, /* An unusual event has occured, though not an error condition. This should be investigated for the root cause. | */ MAV_SEVERITY_INFO=6, /* Normal operational messages. Useful for logging. No action is required for these messages. | */ MAV_SEVERITY_DEBUG=7, /* Useful non-operational messages that can assist in debugging. These should not occur during normal operation. | */ MAV_SEVERITY_ENUM_END=8, /* | */ } MAV_SEVERITY; #endif /** @brief Power supply status flags (bitmask) */ #ifndef HAVE_ENUM_MAV_POWER_STATUS #define HAVE_ENUM_MAV_POWER_STATUS typedef enum MAV_POWER_STATUS { MAV_POWER_STATUS_BRICK_VALID=1, /* main brick power supply valid | */ MAV_POWER_STATUS_SERVO_VALID=2, /* main servo power supply valid for FMU | */ MAV_POWER_STATUS_USB_CONNECTED=4, /* USB power is connected | */ MAV_POWER_STATUS_PERIPH_OVERCURRENT=8, /* peripheral supply is in over-current state | */ MAV_POWER_STATUS_PERIPH_HIPOWER_OVERCURRENT=16, /* hi-power peripheral supply is in over-current state | */ MAV_POWER_STATUS_CHANGED=32, /* Power status has changed since boot | */ MAV_POWER_STATUS_ENUM_END=33, /* | */ } MAV_POWER_STATUS; #endif /** @brief SERIAL_CONTROL device types */ #ifndef HAVE_ENUM_SERIAL_CONTROL_DEV #define HAVE_ENUM_SERIAL_CONTROL_DEV typedef enum SERIAL_CONTROL_DEV { SERIAL_CONTROL_DEV_TELEM1=0, /* First telemetry port | */ SERIAL_CONTROL_DEV_TELEM2=1, /* Second telemetry port | */ SERIAL_CONTROL_DEV_GPS1=2, /* First GPS port | */ SERIAL_CONTROL_DEV_GPS2=3, /* Second GPS port | */ SERIAL_CONTROL_DEV_SHELL=10, /* system shell | */ SERIAL_CONTROL_DEV_ENUM_END=11, /* | */ } SERIAL_CONTROL_DEV; #endif /** @brief SERIAL_CONTROL flags (bitmask) */ #ifndef HAVE_ENUM_SERIAL_CONTROL_FLAG #define HAVE_ENUM_SERIAL_CONTROL_FLAG typedef enum SERIAL_CONTROL_FLAG { SERIAL_CONTROL_FLAG_REPLY=1, /* Set if this is a reply | */ SERIAL_CONTROL_FLAG_RESPOND=2, /* Set if the sender wants the receiver to send a response as another SERIAL_CONTROL message | */ SERIAL_CONTROL_FLAG_EXCLUSIVE=4, /* Set if access to the serial port should be removed from whatever driver is currently using it, giving exclusive access to the SERIAL_CONTROL protocol. The port can be handed back by sending a request without this flag set | */ SERIAL_CONTROL_FLAG_BLOCKING=8, /* Block on writes to the serial port | */ SERIAL_CONTROL_FLAG_MULTI=16, /* Send multiple replies until port is drained | */ SERIAL_CONTROL_FLAG_ENUM_END=17, /* | */ } SERIAL_CONTROL_FLAG; #endif /** @brief Enumeration of distance sensor types */ #ifndef HAVE_ENUM_MAV_DISTANCE_SENSOR #define HAVE_ENUM_MAV_DISTANCE_SENSOR typedef enum MAV_DISTANCE_SENSOR { MAV_DISTANCE_SENSOR_LASER=0, /* Laser rangefinder, e.g. LightWare SF02/F or PulsedLight units | */ MAV_DISTANCE_SENSOR_ULTRASOUND=1, /* Ultrasound rangefinder, e.g. MaxBotix units | */ MAV_DISTANCE_SENSOR_INFRARED=2, /* Infrared rangefinder, e.g. Sharp units | */ MAV_DISTANCE_SENSOR_RADAR=3, /* Radar type, e.g. uLanding units | */ MAV_DISTANCE_SENSOR_UNKNOWN=4, /* Broken or unknown type, e.g. analog units | */ MAV_DISTANCE_SENSOR_ENUM_END=5, /* | */ } MAV_DISTANCE_SENSOR; #endif /** @brief Enumeration of sensor orientation, according to its rotations */ #ifndef HAVE_ENUM_MAV_SENSOR_ORIENTATION #define HAVE_ENUM_MAV_SENSOR_ORIENTATION typedef enum MAV_SENSOR_ORIENTATION { MAV_SENSOR_ROTATION_NONE=0, /* Roll: 0, Pitch: 0, Yaw: 0 | */ MAV_SENSOR_ROTATION_YAW_45=1, /* Roll: 0, Pitch: 0, Yaw: 45 | */ MAV_SENSOR_ROTATION_YAW_90=2, /* Roll: 0, Pitch: 0, Yaw: 90 | */ MAV_SENSOR_ROTATION_YAW_135=3, /* Roll: 0, Pitch: 0, Yaw: 135 | */ MAV_SENSOR_ROTATION_YAW_180=4, /* Roll: 0, Pitch: 0, Yaw: 180 | */ MAV_SENSOR_ROTATION_YAW_225=5, /* Roll: 0, Pitch: 0, Yaw: 225 | */ MAV_SENSOR_ROTATION_YAW_270=6, /* Roll: 0, Pitch: 0, Yaw: 270 | */ MAV_SENSOR_ROTATION_YAW_315=7, /* Roll: 0, Pitch: 0, Yaw: 315 | */ MAV_SENSOR_ROTATION_ROLL_180=8, /* Roll: 180, Pitch: 0, Yaw: 0 | */ MAV_SENSOR_ROTATION_ROLL_180_YAW_45=9, /* Roll: 180, Pitch: 0, Yaw: 45 | */ MAV_SENSOR_ROTATION_ROLL_180_YAW_90=10, /* Roll: 180, Pitch: 0, Yaw: 90 | */ MAV_SENSOR_ROTATION_ROLL_180_YAW_135=11, /* Roll: 180, Pitch: 0, Yaw: 135 | */ MAV_SENSOR_ROTATION_PITCH_180=12, /* Roll: 0, Pitch: 180, Yaw: 0 | */ MAV_SENSOR_ROTATION_ROLL_180_YAW_225=13, /* Roll: 180, Pitch: 0, Yaw: 225 | */ MAV_SENSOR_ROTATION_ROLL_180_YAW_270=14, /* Roll: 180, Pitch: 0, Yaw: 270 | */ MAV_SENSOR_ROTATION_ROLL_180_YAW_315=15, /* Roll: 180, Pitch: 0, Yaw: 315 | */ MAV_SENSOR_ROTATION_ROLL_90=16, /* Roll: 90, Pitch: 0, Yaw: 0 | */ MAV_SENSOR_ROTATION_ROLL_90_YAW_45=17, /* Roll: 90, Pitch: 0, Yaw: 45 | */ MAV_SENSOR_ROTATION_ROLL_90_YAW_90=18, /* Roll: 90, Pitch: 0, Yaw: 90 | */ MAV_SENSOR_ROTATION_ROLL_90_YAW_135=19, /* Roll: 90, Pitch: 0, Yaw: 135 | */ MAV_SENSOR_ROTATION_ROLL_270=20, /* Roll: 270, Pitch: 0, Yaw: 0 | */ MAV_SENSOR_ROTATION_ROLL_270_YAW_45=21, /* Roll: 270, Pitch: 0, Yaw: 45 | */ MAV_SENSOR_ROTATION_ROLL_270_YAW_90=22, /* Roll: 270, Pitch: 0, Yaw: 90 | */ MAV_SENSOR_ROTATION_ROLL_270_YAW_135=23, /* Roll: 270, Pitch: 0, Yaw: 135 | */ MAV_SENSOR_ROTATION_PITCH_90=24, /* Roll: 0, Pitch: 90, Yaw: 0 | */ MAV_SENSOR_ROTATION_PITCH_270=25, /* Roll: 0, Pitch: 270, Yaw: 0 | */ MAV_SENSOR_ROTATION_PITCH_180_YAW_90=26, /* Roll: 0, Pitch: 180, Yaw: 90 | */ MAV_SENSOR_ROTATION_PITCH_180_YAW_270=27, /* Roll: 0, Pitch: 180, Yaw: 270 | */ MAV_SENSOR_ROTATION_ROLL_90_PITCH_90=28, /* Roll: 90, Pitch: 90, Yaw: 0 | */ MAV_SENSOR_ROTATION_ROLL_180_PITCH_90=29, /* Roll: 180, Pitch: 90, Yaw: 0 | */ MAV_SENSOR_ROTATION_ROLL_270_PITCH_90=30, /* Roll: 270, Pitch: 90, Yaw: 0 | */ MAV_SENSOR_ROTATION_ROLL_90_PITCH_180=31, /* Roll: 90, Pitch: 180, Yaw: 0 | */ MAV_SENSOR_ROTATION_ROLL_270_PITCH_180=32, /* Roll: 270, Pitch: 180, Yaw: 0 | */ MAV_SENSOR_ROTATION_ROLL_90_PITCH_270=33, /* Roll: 90, Pitch: 270, Yaw: 0 | */ MAV_SENSOR_ROTATION_ROLL_180_PITCH_270=34, /* Roll: 180, Pitch: 270, Yaw: 0 | */ MAV_SENSOR_ROTATION_ROLL_270_PITCH_270=35, /* Roll: 270, Pitch: 270, Yaw: 0 | */ MAV_SENSOR_ROTATION_ROLL_90_PITCH_180_YAW_90=36, /* Roll: 90, Pitch: 180, Yaw: 90 | */ MAV_SENSOR_ROTATION_ROLL_90_YAW_270=37, /* Roll: 90, Pitch: 0, Yaw: 270 | */ MAV_SENSOR_ROTATION_ROLL_315_PITCH_315_YAW_315=38, /* Roll: 315, Pitch: 315, Yaw: 315 | */ MAV_SENSOR_ORIENTATION_ENUM_END=39, /* | */ } MAV_SENSOR_ORIENTATION; #endif /** @brief Bitmask of (optional) autopilot capabilities (64 bit). If a bit is set, the autopilot supports this capability. */ #ifndef HAVE_ENUM_MAV_PROTOCOL_CAPABILITY #define HAVE_ENUM_MAV_PROTOCOL_CAPABILITY typedef enum MAV_PROTOCOL_CAPABILITY { MAV_PROTOCOL_CAPABILITY_MISSION_FLOAT=1, /* Autopilot supports MISSION float message type. | */ MAV_PROTOCOL_CAPABILITY_PARAM_FLOAT=2, /* Autopilot supports the new param float message type. | */ MAV_PROTOCOL_CAPABILITY_MISSION_INT=4, /* Autopilot supports MISSION_INT scaled integer message type. | */ MAV_PROTOCOL_CAPABILITY_COMMAND_INT=8, /* Autopilot supports COMMAND_INT scaled integer message type. | */ MAV_PROTOCOL_CAPABILITY_PARAM_UNION=16, /* Autopilot supports the new param union message type. | */ MAV_PROTOCOL_CAPABILITY_FTP=32, /* Autopilot supports the new FILE_TRANSFER_PROTOCOL message type. | */ MAV_PROTOCOL_CAPABILITY_SET_ATTITUDE_TARGET=64, /* Autopilot supports commanding attitude offboard. | */ MAV_PROTOCOL_CAPABILITY_SET_POSITION_TARGET_LOCAL_NED=128, /* Autopilot supports commanding position and velocity targets in local NED frame. | */ MAV_PROTOCOL_CAPABILITY_SET_POSITION_TARGET_GLOBAL_INT=256, /* Autopilot supports commanding position and velocity targets in global scaled integers. | */ MAV_PROTOCOL_CAPABILITY_TERRAIN=512, /* Autopilot supports terrain protocol / data handling. | */ MAV_PROTOCOL_CAPABILITY_SET_ACTUATOR_TARGET=1024, /* Autopilot supports direct actuator control. | */ MAV_PROTOCOL_CAPABILITY_FLIGHT_TERMINATION=2048, /* Autopilot supports the flight termination command. | */ MAV_PROTOCOL_CAPABILITY_COMPASS_CALIBRATION=4096, /* Autopilot supports onboard compass calibration. | */ MAV_PROTOCOL_CAPABILITY_MAVLINK2=8192, /* Autopilot supports mavlink version 2. | */ MAV_PROTOCOL_CAPABILITY_MISSION_FENCE=16384, /* Autopilot supports mission fence protocol. | */ MAV_PROTOCOL_CAPABILITY_MISSION_RALLY=32768, /* Autopilot supports mission rally point protocol. | */ MAV_PROTOCOL_CAPABILITY_FLIGHT_INFORMATION=65536, /* Autopilot supports the flight information protocol. | */ MAV_PROTOCOL_CAPABILITY_ENUM_END=65537, /* | */ } MAV_PROTOCOL_CAPABILITY; #endif /** @brief Type of mission items being requested/sent in mission protocol. */ #ifndef HAVE_ENUM_MAV_MISSION_TYPE #define HAVE_ENUM_MAV_MISSION_TYPE typedef enum MAV_MISSION_TYPE { MAV_MISSION_TYPE_MISSION=0, /* Items are mission commands for main mission. | */ MAV_MISSION_TYPE_FENCE=1, /* Specifies GeoFence area(s). Items are MAV_CMD_FENCE_ GeoFence items. | */ MAV_MISSION_TYPE_RALLY=2, /* Specifies the rally points for the vehicle. Rally points are alternative RTL points. Items are MAV_CMD_RALLY_POINT rally point items. | */ MAV_MISSION_TYPE_ALL=255, /* Only used in MISSION_CLEAR_ALL to clear all mission types. | */ MAV_MISSION_TYPE_ENUM_END=256, /* | */ } MAV_MISSION_TYPE; #endif /** @brief Enumeration of estimator types */ #ifndef HAVE_ENUM_MAV_ESTIMATOR_TYPE #define HAVE_ENUM_MAV_ESTIMATOR_TYPE typedef enum MAV_ESTIMATOR_TYPE { MAV_ESTIMATOR_TYPE_NAIVE=1, /* This is a naive estimator without any real covariance feedback. | */ MAV_ESTIMATOR_TYPE_VISION=2, /* Computer vision based estimate. Might be up to scale. | */ MAV_ESTIMATOR_TYPE_VIO=3, /* Visual-inertial estimate. | */ MAV_ESTIMATOR_TYPE_GPS=4, /* Plain GPS estimate. | */ MAV_ESTIMATOR_TYPE_GPS_INS=5, /* Estimator integrating GPS and inertial sensing. | */ MAV_ESTIMATOR_TYPE_ENUM_END=6, /* | */ } MAV_ESTIMATOR_TYPE; #endif /** @brief Enumeration of battery types */ #ifndef HAVE_ENUM_MAV_BATTERY_TYPE #define HAVE_ENUM_MAV_BATTERY_TYPE typedef enum MAV_BATTERY_TYPE { MAV_BATTERY_TYPE_UNKNOWN=0, /* Not specified. | */ MAV_BATTERY_TYPE_LIPO=1, /* Lithium polymer battery | */ MAV_BATTERY_TYPE_LIFE=2, /* Lithium-iron-phosphate battery | */ MAV_BATTERY_TYPE_LION=3, /* Lithium-ION battery | */ MAV_BATTERY_TYPE_NIMH=4, /* Nickel metal hydride battery | */ MAV_BATTERY_TYPE_ENUM_END=5, /* | */ } MAV_BATTERY_TYPE; #endif /** @brief Enumeration of battery functions */ #ifndef HAVE_ENUM_MAV_BATTERY_FUNCTION #define HAVE_ENUM_MAV_BATTERY_FUNCTION typedef enum MAV_BATTERY_FUNCTION { MAV_BATTERY_FUNCTION_UNKNOWN=0, /* Battery function is unknown | */ MAV_BATTERY_FUNCTION_ALL=1, /* Battery supports all flight systems | */ MAV_BATTERY_FUNCTION_PROPULSION=2, /* Battery for the propulsion system | */ MAV_BATTERY_FUNCTION_AVIONICS=3, /* Avionics battery | */ MAV_BATTERY_TYPE_PAYLOAD=4, /* Payload battery | */ MAV_BATTERY_FUNCTION_ENUM_END=5, /* | */ } MAV_BATTERY_FUNCTION; #endif /** @brief Enumeration of VTOL states */ #ifndef HAVE_ENUM_MAV_VTOL_STATE #define HAVE_ENUM_MAV_VTOL_STATE typedef enum MAV_VTOL_STATE { MAV_VTOL_STATE_UNDEFINED=0, /* MAV is not configured as VTOL | */ MAV_VTOL_STATE_TRANSITION_TO_FW=1, /* VTOL is in transition from multicopter to fixed-wing | */ MAV_VTOL_STATE_TRANSITION_TO_MC=2, /* VTOL is in transition from fixed-wing to multicopter | */ MAV_VTOL_STATE_MC=3, /* VTOL is in multicopter state | */ MAV_VTOL_STATE_FW=4, /* VTOL is in fixed-wing state | */ MAV_VTOL_STATE_ENUM_END=5, /* | */ } MAV_VTOL_STATE; #endif /** @brief Enumeration of landed detector states */ #ifndef HAVE_ENUM_MAV_LANDED_STATE #define HAVE_ENUM_MAV_LANDED_STATE typedef enum MAV_LANDED_STATE { MAV_LANDED_STATE_UNDEFINED=0, /* MAV landed state is unknown | */ MAV_LANDED_STATE_ON_GROUND=1, /* MAV is landed (on ground) | */ MAV_LANDED_STATE_IN_AIR=2, /* MAV is in air | */ MAV_LANDED_STATE_TAKEOFF=3, /* MAV currently taking off | */ MAV_LANDED_STATE_LANDING=4, /* MAV currently landing | */ MAV_LANDED_STATE_ENUM_END=5, /* | */ } MAV_LANDED_STATE; #endif /** @brief Enumeration of the ADSB altimeter types */ #ifndef HAVE_ENUM_ADSB_ALTITUDE_TYPE #define HAVE_ENUM_ADSB_ALTITUDE_TYPE typedef enum ADSB_ALTITUDE_TYPE { ADSB_ALTITUDE_TYPE_PRESSURE_QNH=0, /* Altitude reported from a Baro source using QNH reference | */ ADSB_ALTITUDE_TYPE_GEOMETRIC=1, /* Altitude reported from a GNSS source | */ ADSB_ALTITUDE_TYPE_ENUM_END=2, /* | */ } ADSB_ALTITUDE_TYPE; #endif /** @brief ADSB classification for the type of vehicle emitting the transponder signal */ #ifndef HAVE_ENUM_ADSB_EMITTER_TYPE #define HAVE_ENUM_ADSB_EMITTER_TYPE typedef enum ADSB_EMITTER_TYPE { ADSB_EMITTER_TYPE_NO_INFO=0, /* | */ ADSB_EMITTER_TYPE_LIGHT=1, /* | */ ADSB_EMITTER_TYPE_SMALL=2, /* | */ ADSB_EMITTER_TYPE_LARGE=3, /* | */ ADSB_EMITTER_TYPE_HIGH_VORTEX_LARGE=4, /* | */ ADSB_EMITTER_TYPE_HEAVY=5, /* | */ ADSB_EMITTER_TYPE_HIGHLY_MANUV=6, /* | */ ADSB_EMITTER_TYPE_ROTOCRAFT=7, /* | */ ADSB_EMITTER_TYPE_UNASSIGNED=8, /* | */ ADSB_EMITTER_TYPE_GLIDER=9, /* | */ ADSB_EMITTER_TYPE_LIGHTER_AIR=10, /* | */ ADSB_EMITTER_TYPE_PARACHUTE=11, /* | */ ADSB_EMITTER_TYPE_ULTRA_LIGHT=12, /* | */ ADSB_EMITTER_TYPE_UNASSIGNED2=13, /* | */ ADSB_EMITTER_TYPE_UAV=14, /* | */ ADSB_EMITTER_TYPE_SPACE=15, /* | */ ADSB_EMITTER_TYPE_UNASSGINED3=16, /* | */ ADSB_EMITTER_TYPE_EMERGENCY_SURFACE=17, /* | */ ADSB_EMITTER_TYPE_SERVICE_SURFACE=18, /* | */ ADSB_EMITTER_TYPE_POINT_OBSTACLE=19, /* | */ ADSB_EMITTER_TYPE_ENUM_END=20, /* | */ } ADSB_EMITTER_TYPE; #endif /** @brief These flags indicate status such as data validity of each data source. Set = data valid */ #ifndef HAVE_ENUM_ADSB_FLAGS #define HAVE_ENUM_ADSB_FLAGS typedef enum ADSB_FLAGS { ADSB_FLAGS_VALID_COORDS=1, /* | */ ADSB_FLAGS_VALID_ALTITUDE=2, /* | */ ADSB_FLAGS_VALID_HEADING=4, /* | */ ADSB_FLAGS_VALID_VELOCITY=8, /* | */ ADSB_FLAGS_VALID_CALLSIGN=16, /* | */ ADSB_FLAGS_VALID_SQUAWK=32, /* | */ ADSB_FLAGS_SIMULATED=64, /* | */ ADSB_FLAGS_ENUM_END=65, /* | */ } ADSB_FLAGS; #endif /** @brief Bitmask of options for the MAV_CMD_DO_REPOSITION */ #ifndef HAVE_ENUM_MAV_DO_REPOSITION_FLAGS #define HAVE_ENUM_MAV_DO_REPOSITION_FLAGS typedef enum MAV_DO_REPOSITION_FLAGS { MAV_DO_REPOSITION_FLAGS_CHANGE_MODE=1, /* The aircraft should immediately transition into guided. This should not be set for follow me applications | */ MAV_DO_REPOSITION_FLAGS_ENUM_END=2, /* | */ } MAV_DO_REPOSITION_FLAGS; #endif /** @brief Flags in EKF_STATUS message */ #ifndef HAVE_ENUM_ESTIMATOR_STATUS_FLAGS #define HAVE_ENUM_ESTIMATOR_STATUS_FLAGS typedef enum ESTIMATOR_STATUS_FLAGS { ESTIMATOR_ATTITUDE=1, /* True if the attitude estimate is good | */ ESTIMATOR_VELOCITY_HORIZ=2, /* True if the horizontal velocity estimate is good | */ ESTIMATOR_VELOCITY_VERT=4, /* True if the vertical velocity estimate is good | */ ESTIMATOR_POS_HORIZ_REL=8, /* True if the horizontal position (relative) estimate is good | */ ESTIMATOR_POS_HORIZ_ABS=16, /* True if the horizontal position (absolute) estimate is good | */ ESTIMATOR_POS_VERT_ABS=32, /* True if the vertical position (absolute) estimate is good | */ ESTIMATOR_POS_VERT_AGL=64, /* True if the vertical position (above ground) estimate is good | */ ESTIMATOR_CONST_POS_MODE=128, /* True if the EKF is in a constant position mode and is not using external measurements (eg GPS or optical flow) | */ ESTIMATOR_PRED_POS_HORIZ_REL=256, /* True if the EKF has sufficient data to enter a mode that will provide a (relative) position estimate | */ ESTIMATOR_PRED_POS_HORIZ_ABS=512, /* True if the EKF has sufficient data to enter a mode that will provide a (absolute) position estimate | */ ESTIMATOR_GPS_GLITCH=1024, /* True if the EKF has detected a GPS glitch | */ ESTIMATOR_STATUS_FLAGS_ENUM_END=1025, /* | */ } ESTIMATOR_STATUS_FLAGS; #endif /** @brief */ #ifndef HAVE_ENUM_MOTOR_TEST_ORDER #define HAVE_ENUM_MOTOR_TEST_ORDER typedef enum MOTOR_TEST_ORDER { MOTOR_TEST_ORDER_DEFAULT=0, /* default autopilot motor test method | */ MOTOR_TEST_ORDER_SEQUENCE=1, /* motor numbers are specified as their index in a predefined vehicle-specific sequence | */ MOTOR_TEST_ORDER_BOARD=2, /* motor numbers are specified as the output as labeled on the board | */ MOTOR_TEST_ORDER_ENUM_END=3, /* | */ } MOTOR_TEST_ORDER; #endif /** @brief */ #ifndef HAVE_ENUM_MOTOR_TEST_THROTTLE_TYPE #define HAVE_ENUM_MOTOR_TEST_THROTTLE_TYPE typedef enum MOTOR_TEST_THROTTLE_TYPE { MOTOR_TEST_THROTTLE_PERCENT=0, /* throttle as a percentage from 0 ~ 100 | */ MOTOR_TEST_THROTTLE_PWM=1, /* throttle as an absolute PWM value (normally in range of 1000~2000) | */ MOTOR_TEST_THROTTLE_PILOT=2, /* throttle pass-through from pilot's transmitter | */ MOTOR_TEST_COMPASS_CAL=3, /* per-motor compass calibration test | */ MOTOR_TEST_THROTTLE_TYPE_ENUM_END=4, /* | */ } MOTOR_TEST_THROTTLE_TYPE; #endif /** @brief */ #ifndef HAVE_ENUM_GPS_INPUT_IGNORE_FLAGS #define HAVE_ENUM_GPS_INPUT_IGNORE_FLAGS typedef enum GPS_INPUT_IGNORE_FLAGS { GPS_INPUT_IGNORE_FLAG_ALT=1, /* ignore altitude field | */ GPS_INPUT_IGNORE_FLAG_HDOP=2, /* ignore hdop field | */ GPS_INPUT_IGNORE_FLAG_VDOP=4, /* ignore vdop field | */ GPS_INPUT_IGNORE_FLAG_VEL_HORIZ=8, /* ignore horizontal velocity field (vn and ve) | */ GPS_INPUT_IGNORE_FLAG_VEL_VERT=16, /* ignore vertical velocity field (vd) | */ GPS_INPUT_IGNORE_FLAG_SPEED_ACCURACY=32, /* ignore speed accuracy field | */ GPS_INPUT_IGNORE_FLAG_HORIZONTAL_ACCURACY=64, /* ignore horizontal accuracy field | */ GPS_INPUT_IGNORE_FLAG_VERTICAL_ACCURACY=128, /* ignore vertical accuracy field | */ GPS_INPUT_IGNORE_FLAGS_ENUM_END=129, /* | */ } GPS_INPUT_IGNORE_FLAGS; #endif /** @brief Possible actions an aircraft can take to avoid a collision. */ #ifndef HAVE_ENUM_MAV_COLLISION_ACTION #define HAVE_ENUM_MAV_COLLISION_ACTION typedef enum MAV_COLLISION_ACTION { MAV_COLLISION_ACTION_NONE=0, /* Ignore any potential collisions | */ MAV_COLLISION_ACTION_REPORT=1, /* Report potential collision | */ MAV_COLLISION_ACTION_ASCEND_OR_DESCEND=2, /* Ascend or Descend to avoid threat | */ MAV_COLLISION_ACTION_MOVE_HORIZONTALLY=3, /* Move horizontally to avoid threat | */ MAV_COLLISION_ACTION_MOVE_PERPENDICULAR=4, /* Aircraft to move perpendicular to the collision's velocity vector | */ MAV_COLLISION_ACTION_RTL=5, /* Aircraft to fly directly back to its launch point | */ MAV_COLLISION_ACTION_HOVER=6, /* Aircraft to stop in place | */ MAV_COLLISION_ACTION_ENUM_END=7, /* | */ } MAV_COLLISION_ACTION; #endif /** @brief Aircraft-rated danger from this threat. */ #ifndef HAVE_ENUM_MAV_COLLISION_THREAT_LEVEL #define HAVE_ENUM_MAV_COLLISION_THREAT_LEVEL typedef enum MAV_COLLISION_THREAT_LEVEL { MAV_COLLISION_THREAT_LEVEL_NONE=0, /* Not a threat | */ MAV_COLLISION_THREAT_LEVEL_LOW=1, /* Craft is mildly concerned about this threat | */ MAV_COLLISION_THREAT_LEVEL_HIGH=2, /* Craft is panicing, and may take actions to avoid threat | */ MAV_COLLISION_THREAT_LEVEL_ENUM_END=3, /* | */ } MAV_COLLISION_THREAT_LEVEL; #endif /** @brief Source of information about this collision. */ #ifndef HAVE_ENUM_MAV_COLLISION_SRC #define HAVE_ENUM_MAV_COLLISION_SRC typedef enum MAV_COLLISION_SRC { MAV_COLLISION_SRC_ADSB=0, /* ID field references ADSB_VEHICLE packets | */ MAV_COLLISION_SRC_MAVLINK_GPS_GLOBAL_INT=1, /* ID field references MAVLink SRC ID | */ MAV_COLLISION_SRC_ENUM_END=2, /* | */ } MAV_COLLISION_SRC; #endif /** @brief Type of GPS fix */ #ifndef HAVE_ENUM_GPS_FIX_TYPE #define HAVE_ENUM_GPS_FIX_TYPE typedef enum GPS_FIX_TYPE { GPS_FIX_TYPE_NO_GPS=0, /* No GPS connected | */ GPS_FIX_TYPE_NO_FIX=1, /* No position information, GPS is connected | */ GPS_FIX_TYPE_2D_FIX=2, /* 2D position | */ GPS_FIX_TYPE_3D_FIX=3, /* 3D position | */ GPS_FIX_TYPE_DGPS=4, /* DGPS/SBAS aided 3D position | */ GPS_FIX_TYPE_RTK_FLOAT=5, /* RTK float, 3D position | */ GPS_FIX_TYPE_RTK_FIXED=6, /* RTK Fixed, 3D position | */ GPS_FIX_TYPE_STATIC=7, /* Static fixed, typically used for base stations | */ GPS_FIX_TYPE_PPP=8, /* PPP, 3D position. | */ GPS_FIX_TYPE_ENUM_END=9, /* | */ } GPS_FIX_TYPE; #endif /** @brief Type of landing target */ #ifndef HAVE_ENUM_LANDING_TARGET_TYPE #define HAVE_ENUM_LANDING_TARGET_TYPE typedef enum LANDING_TARGET_TYPE { LANDING_TARGET_TYPE_LIGHT_BEACON=0, /* Landing target signaled by light beacon (ex: IR-LOCK) | */ LANDING_TARGET_TYPE_RADIO_BEACON=1, /* Landing target signaled by radio beacon (ex: ILS, NDB) | */ LANDING_TARGET_TYPE_VISION_FIDUCIAL=2, /* Landing target represented by a fiducial marker (ex: ARTag) | */ LANDING_TARGET_TYPE_VISION_OTHER=3, /* Landing target represented by a pre-defined visual shape/feature (ex: X-marker, H-marker, square) | */ LANDING_TARGET_TYPE_ENUM_END=4, /* | */ } LANDING_TARGET_TYPE; #endif /** @brief Direction of VTOL transition */ #ifndef HAVE_ENUM_VTOL_TRANSITION_HEADING #define HAVE_ENUM_VTOL_TRANSITION_HEADING typedef enum VTOL_TRANSITION_HEADING { VTOL_TRANSITION_HEADING_VEHICLE_DEFAULT=0, /* Respect the heading configuration of the vehicle. | */ VTOL_TRANSITION_HEADING_NEXT_WAYPOINT=1, /* Use the heading pointing towards the next waypoint. | */ VTOL_TRANSITION_HEADING_TAKEOFF=2, /* Use the heading on takeoff (while sitting on the ground). | */ VTOL_TRANSITION_HEADING_SPECIFIED=3, /* Use the specified heading in parameter 4. | */ VTOL_TRANSITION_HEADING_ANY=4, /* Use the current heading when reaching takeoff altitude (potentially facing the wind when weather-vaning is active). | */ VTOL_TRANSITION_HEADING_ENUM_END=5, /* | */ } VTOL_TRANSITION_HEADING; #endif /** @brief Camera capability flags (Bitmap). */ #ifndef HAVE_ENUM_CAMERA_CAP_FLAGS #define HAVE_ENUM_CAMERA_CAP_FLAGS typedef enum CAMERA_CAP_FLAGS { CAMERA_CAP_FLAGS_CAPTURE_VIDEO=1, /* Camera is able to record video. | */ CAMERA_CAP_FLAGS_CAPTURE_IMAGE=2, /* Camera is able to capture images. | */ CAMERA_CAP_FLAGS_HAS_MODES=4, /* Camera has separate Video and Image/Photo modes (MAV_CMD_SET_CAMERA_MODE) | */ CAMERA_CAP_FLAGS_CAN_CAPTURE_IMAGE_IN_VIDEO_MODE=8, /* Camera can capture images while in video mode | */ CAMERA_CAP_FLAGS_CAN_CAPTURE_VIDEO_IN_IMAGE_MODE=16, /* Camera can capture videos while in Photo/Image mode | */ CAMERA_CAP_FLAGS_HAS_IMAGE_SURVEY_MODE=32, /* Camera has image survey mode (MAV_CMD_SET_CAMERA_MODE) | */ CAMERA_CAP_FLAGS_ENUM_END=33, /* | */ } CAMERA_CAP_FLAGS; #endif /** @brief Result from a PARAM_EXT_SET message. */ #ifndef HAVE_ENUM_PARAM_ACK #define HAVE_ENUM_PARAM_ACK typedef enum PARAM_ACK { PARAM_ACK_ACCEPTED=0, /* Parameter value ACCEPTED and SET | */ PARAM_ACK_VALUE_UNSUPPORTED=1, /* Parameter value UNKNOWN/UNSUPPORTED | */ PARAM_ACK_FAILED=2, /* Parameter failed to set | */ PARAM_ACK_IN_PROGRESS=3, /* Parameter value received but not yet validated or set. A subsequent PARAM_EXT_ACK will follow once operation is completed with the actual result. These are for parameters that may take longer to set. Instead of waiting for an ACK and potentially timing out, you will immediately receive this response to let you know it was received. | */ PARAM_ACK_ENUM_END=4, /* | */ } PARAM_ACK; #endif /** @brief Camera Modes. */ #ifndef HAVE_ENUM_CAMERA_MODE #define HAVE_ENUM_CAMERA_MODE typedef enum CAMERA_MODE { CAMERA_MODE_IMAGE=0, /* Camera is in image/photo capture mode. | */ CAMERA_MODE_VIDEO=1, /* Camera is in video capture mode. | */ CAMERA_MODE_IMAGE_SURVEY=2, /* Camera is in image survey capture mode. It allows for camera controller to do specific settings for surveys. | */ CAMERA_MODE_ENUM_END=3, /* | */ } CAMERA_MODE; #endif /** @brief */ #ifndef HAVE_ENUM_MAV_ARM_AUTH_DENIED_REASON #define HAVE_ENUM_MAV_ARM_AUTH_DENIED_REASON typedef enum MAV_ARM_AUTH_DENIED_REASON { MAV_ARM_AUTH_DENIED_REASON_GENERIC=0, /* Not a specific reason | */ MAV_ARM_AUTH_DENIED_REASON_NONE=1, /* Authorizer will send the error as string to GCS | */ MAV_ARM_AUTH_DENIED_REASON_INVALID_WAYPOINT=2, /* At least one waypoint have a invalid value | */ MAV_ARM_AUTH_DENIED_REASON_TIMEOUT=3, /* Timeout in the authorizer process(in case it depends on network) | */ MAV_ARM_AUTH_DENIED_REASON_AIRSPACE_IN_USE=4, /* Airspace of the mission in use by another vehicle, second result parameter can have the waypoint id that caused it to be denied. | */ MAV_ARM_AUTH_DENIED_REASON_BAD_WEATHER=5, /* Weather is not good to fly | */ MAV_ARM_AUTH_DENIED_REASON_ENUM_END=6, /* | */ } MAV_ARM_AUTH_DENIED_REASON; #endif /** @brief RTK GPS baseline coordinate system, used for RTK corrections */ #ifndef HAVE_ENUM_RTK_BASELINE_COORDINATE_SYSTEM #define HAVE_ENUM_RTK_BASELINE_COORDINATE_SYSTEM typedef enum RTK_BASELINE_COORDINATE_SYSTEM { RTK_BASELINE_COORDINATE_SYSTEM_ECEF=0, /* Earth-centered, Earth-fixed | */ RTK_BASELINE_COORDINATE_SYSTEM_NED=1, /* North, East, Down | */ RTK_BASELINE_COORDINATE_SYSTEM_ENUM_END=2, /* | */ } RTK_BASELINE_COORDINATE_SYSTEM; #endif // MAVLINK VERSION #ifndef MAVLINK_VERSION #define MAVLINK_VERSION 3 #endif #if (MAVLINK_VERSION == 0) #undef MAVLINK_VERSION #define MAVLINK_VERSION 3 #endif // MESSAGE DEFINITIONS #include "./mavlink_msg_heartbeat.h" #include "./mavlink_msg_sys_status.h" #include "./mavlink_msg_system_time.h" #include "./mavlink_msg_ping.h" #include "./mavlink_msg_change_operator_control.h" #include "./mavlink_msg_change_operator_control_ack.h" #include "./mavlink_msg_auth_key.h" #include "./mavlink_msg_set_mode.h" #include "./mavlink_msg_param_request_read.h" #include "./mavlink_msg_param_request_list.h" #include "./mavlink_msg_param_value.h" #include "./mavlink_msg_param_set.h" #include "./mavlink_msg_gps_raw_int.h" #include "./mavlink_msg_gps_status.h" #include "./mavlink_msg_scaled_imu.h" #include "./mavlink_msg_raw_imu.h" #include "./mavlink_msg_raw_pressure.h" #include "./mavlink_msg_scaled_pressure.h" #include "./mavlink_msg_attitude.h" #include "./mavlink_msg_attitude_quaternion.h" #include "./mavlink_msg_local_position_ned.h" #include "./mavlink_msg_global_position_int.h" #include "./mavlink_msg_rc_channels_scaled.h" #include "./mavlink_msg_rc_channels_raw.h" #include "./mavlink_msg_servo_output_raw.h" #include "./mavlink_msg_mission_request_partial_list.h" #include "./mavlink_msg_mission_write_partial_list.h" #include "./mavlink_msg_mission_item.h" #include "./mavlink_msg_mission_request.h" #include "./mavlink_msg_mission_set_current.h" #include "./mavlink_msg_mission_current.h" #include "./mavlink_msg_mission_request_list.h" #include "./mavlink_msg_mission_count.h" #include "./mavlink_msg_mission_clear_all.h" #include "./mavlink_msg_mission_item_reached.h" #include "./mavlink_msg_mission_ack.h" #include "./mavlink_msg_set_gps_global_origin.h" #include "./mavlink_msg_gps_global_origin.h" #include "./mavlink_msg_param_map_rc.h" #include "./mavlink_msg_mission_request_int.h" #include "./mavlink_msg_safety_set_allowed_area.h" #include "./mavlink_msg_safety_allowed_area.h" #include "./mavlink_msg_attitude_quaternion_cov.h" #include "./mavlink_msg_nav_controller_output.h" #include "./mavlink_msg_global_position_int_cov.h" #include "./mavlink_msg_local_position_ned_cov.h" #include "./mavlink_msg_rc_channels.h" #include "./mavlink_msg_request_data_stream.h" #include "./mavlink_msg_data_stream.h" #include "./mavlink_msg_manual_control.h" #include "./mavlink_msg_rc_channels_override.h" #include "./mavlink_msg_mission_item_int.h" #include "./mavlink_msg_vfr_hud.h" #include "./mavlink_msg_command_int.h" #include "./mavlink_msg_command_long.h" #include "./mavlink_msg_command_ack.h" #include "./mavlink_msg_manual_setpoint.h" #include "./mavlink_msg_set_attitude_target.h" #include "./mavlink_msg_attitude_target.h" #include "./mavlink_msg_set_position_target_local_ned.h" #include "./mavlink_msg_position_target_local_ned.h" #include "./mavlink_msg_set_position_target_global_int.h" #include "./mavlink_msg_position_target_global_int.h" #include "./mavlink_msg_local_position_ned_system_global_offset.h" #include "./mavlink_msg_hil_state.h" #include "./mavlink_msg_hil_controls.h" #include "./mavlink_msg_hil_rc_inputs_raw.h" #include "./mavlink_msg_hil_actuator_controls.h" #include "./mavlink_msg_optical_flow.h" #include "./mavlink_msg_global_vision_position_estimate.h" #include "./mavlink_msg_vision_position_estimate.h" #include "./mavlink_msg_vision_speed_estimate.h" #include "./mavlink_msg_vicon_position_estimate.h" #include "./mavlink_msg_highres_imu.h" #include "./mavlink_msg_optical_flow_rad.h" #include "./mavlink_msg_hil_sensor.h" #include "./mavlink_msg_sim_state.h" #include "./mavlink_msg_radio_status.h" #include "./mavlink_msg_file_transfer_protocol.h" #include "./mavlink_msg_timesync.h" #include "./mavlink_msg_camera_trigger.h" #include "./mavlink_msg_hil_gps.h" #include "./mavlink_msg_hil_optical_flow.h" #include "./mavlink_msg_hil_state_quaternion.h" #include "./mavlink_msg_scaled_imu2.h" #include "./mavlink_msg_log_request_list.h" #include "./mavlink_msg_log_entry.h" #include "./mavlink_msg_log_request_data.h" #include "./mavlink_msg_log_data.h" #include "./mavlink_msg_log_erase.h" #include "./mavlink_msg_log_request_end.h" #include "./mavlink_msg_gps_inject_data.h" #include "./mavlink_msg_gps2_raw.h" #include "./mavlink_msg_power_status.h" #include "./mavlink_msg_serial_control.h" #include "./mavlink_msg_gps_rtk.h" #include "./mavlink_msg_gps2_rtk.h" #include "./mavlink_msg_scaled_imu3.h" #include "./mavlink_msg_data_transmission_handshake.h" #include "./mavlink_msg_encapsulated_data.h" #include "./mavlink_msg_distance_sensor.h" #include "./mavlink_msg_terrain_request.h" #include "./mavlink_msg_terrain_data.h" #include "./mavlink_msg_terrain_check.h" #include "./mavlink_msg_terrain_report.h" #include "./mavlink_msg_scaled_pressure2.h" #include "./mavlink_msg_att_pos_mocap.h" #include "./mavlink_msg_set_actuator_control_target.h" #include "./mavlink_msg_actuator_control_target.h" #include "./mavlink_msg_altitude.h" #include "./mavlink_msg_resource_request.h" #include "./mavlink_msg_scaled_pressure3.h" #include "./mavlink_msg_follow_target.h" #include "./mavlink_msg_control_system_state.h" #include "./mavlink_msg_battery_status.h" #include "./mavlink_msg_autopilot_version.h" #include "./mavlink_msg_landing_target.h" #include "./mavlink_msg_estimator_status.h" #include "./mavlink_msg_wind_cov.h" #include "./mavlink_msg_gps_input.h" #include "./mavlink_msg_gps_rtcm_data.h" #include "./mavlink_msg_high_latency.h" #include "./mavlink_msg_vibration.h" #include "./mavlink_msg_home_position.h" #include "./mavlink_msg_set_home_position.h" #include "./mavlink_msg_message_interval.h" #include "./mavlink_msg_extended_sys_state.h" #include "./mavlink_msg_adsb_vehicle.h" #include "./mavlink_msg_collision.h" #include "./mavlink_msg_v2_extension.h" #include "./mavlink_msg_memory_vect.h" #include "./mavlink_msg_debug_vect.h" #include "./mavlink_msg_named_value_float.h" #include "./mavlink_msg_named_value_int.h" #include "./mavlink_msg_statustext.h" #include "./mavlink_msg_debug.h" #include "./mavlink_msg_setup_signing.h" #include "./mavlink_msg_button_change.h" #include "./mavlink_msg_play_tune.h" #include "./mavlink_msg_camera_information.h" #include "./mavlink_msg_camera_settings.h" #include "./mavlink_msg_storage_information.h" #include "./mavlink_msg_camera_capture_status.h" #include "./mavlink_msg_camera_image_captured.h" #include "./mavlink_msg_flight_information.h" #include "./mavlink_msg_mount_orientation.h" #include "./mavlink_msg_logging_data.h" #include "./mavlink_msg_logging_data_acked.h" #include "./mavlink_msg_logging_ack.h" #include "./mavlink_msg_video_stream_information.h" #include "./mavlink_msg_set_video_stream_settings.h" #include "./mavlink_msg_wifi_config_ap.h" #include "./mavlink_msg_protocol_version.h" #include "./mavlink_msg_uavcan_node_status.h" #include "./mavlink_msg_uavcan_node_info.h" #include "./mavlink_msg_param_ext_request_read.h" #include "./mavlink_msg_param_ext_request_list.h" #include "./mavlink_msg_param_ext_value.h" #include "./mavlink_msg_param_ext_set.h" #include "./mavlink_msg_param_ext_ack.h" #include "./mavlink_msg_obstacle_distance.h" // base include #undef MAVLINK_THIS_XML_IDX #define MAVLINK_THIS_XML_IDX 0 #if MAVLINK_THIS_XML_IDX == MAVLINK_PRIMARY_XML_IDX # define MAVLINK_MESSAGE_INFO {MAVLINK_MESSAGE_INFO_HEARTBEAT, MAVLINK_MESSAGE_INFO_SYS_STATUS, MAVLINK_MESSAGE_INFO_SYSTEM_TIME, MAVLINK_MESSAGE_INFO_PING, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL, MAVLINK_MESSAGE_INFO_CHANGE_OPERATOR_CONTROL_ACK, MAVLINK_MESSAGE_INFO_AUTH_KEY, MAVLINK_MESSAGE_INFO_SET_MODE, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_READ, MAVLINK_MESSAGE_INFO_PARAM_REQUEST_LIST, MAVLINK_MESSAGE_INFO_PARAM_VALUE, MAVLINK_MESSAGE_INFO_PARAM_SET, MAVLINK_MESSAGE_INFO_GPS_RAW_INT, MAVLINK_MESSAGE_INFO_GPS_STATUS, MAVLINK_MESSAGE_INFO_SCALED_IMU, MAVLINK_MESSAGE_INFO_RAW_IMU, MAVLINK_MESSAGE_INFO_RAW_PRESSURE, MAVLINK_MESSAGE_INFO_SCALED_PRESSURE, MAVLINK_MESSAGE_INFO_ATTITUDE, MAVLINK_MESSAGE_INFO_ATTITUDE_QUATERNION, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_INT, MAVLINK_MESSAGE_INFO_RC_CHANNELS_SCALED, MAVLINK_MESSAGE_INFO_RC_CHANNELS_RAW, MAVLINK_MESSAGE_INFO_SERVO_OUTPUT_RAW, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_WRITE_PARTIAL_LIST, MAVLINK_MESSAGE_INFO_MISSION_ITEM, MAVLINK_MESSAGE_INFO_MISSION_REQUEST, MAVLINK_MESSAGE_INFO_MISSION_SET_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_CURRENT, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_LIST, MAVLINK_MESSAGE_INFO_MISSION_COUNT, MAVLINK_MESSAGE_INFO_MISSION_CLEAR_ALL, MAVLINK_MESSAGE_INFO_MISSION_ITEM_REACHED, MAVLINK_MESSAGE_INFO_MISSION_ACK, MAVLINK_MESSAGE_INFO_SET_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_GPS_GLOBAL_ORIGIN, MAVLINK_MESSAGE_INFO_PARAM_MAP_RC, MAVLINK_MESSAGE_INFO_MISSION_REQUEST_INT, MAVLINK_MESSAGE_INFO_SAFETY_SET_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_SAFETY_ALLOWED_AREA, MAVLINK_MESSAGE_INFO_ATTITUDE_QUATERNION_COV, MAVLINK_MESSAGE_INFO_NAV_CONTROLLER_OUTPUT, MAVLINK_MESSAGE_INFO_GLOBAL_POSITION_INT_COV, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED_COV, MAVLINK_MESSAGE_INFO_RC_CHANNELS, MAVLINK_MESSAGE_INFO_REQUEST_DATA_STREAM, MAVLINK_MESSAGE_INFO_DATA_STREAM, MAVLINK_MESSAGE_INFO_MANUAL_CONTROL, MAVLINK_MESSAGE_INFO_RC_CHANNELS_OVERRIDE, MAVLINK_MESSAGE_INFO_MISSION_ITEM_INT, MAVLINK_MESSAGE_INFO_VFR_HUD, MAVLINK_MESSAGE_INFO_COMMAND_INT, MAVLINK_MESSAGE_INFO_COMMAND_LONG, MAVLINK_MESSAGE_INFO_COMMAND_ACK, MAVLINK_MESSAGE_INFO_MANUAL_SETPOINT, MAVLINK_MESSAGE_INFO_SET_ATTITUDE_TARGET, MAVLINK_MESSAGE_INFO_ATTITUDE_TARGET, MAVLINK_MESSAGE_INFO_SET_POSITION_TARGET_LOCAL_NED, MAVLINK_MESSAGE_INFO_POSITION_TARGET_LOCAL_NED, MAVLINK_MESSAGE_INFO_SET_POSITION_TARGET_GLOBAL_INT, MAVLINK_MESSAGE_INFO_POSITION_TARGET_GLOBAL_INT, MAVLINK_MESSAGE_INFO_LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET, MAVLINK_MESSAGE_INFO_HIL_STATE, MAVLINK_MESSAGE_INFO_HIL_CONTROLS, MAVLINK_MESSAGE_INFO_HIL_RC_INPUTS_RAW, MAVLINK_MESSAGE_INFO_HIL_ACTUATOR_CONTROLS, MAVLINK_MESSAGE_INFO_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_GLOBAL_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_VISION_SPEED_ESTIMATE, MAVLINK_MESSAGE_INFO_VICON_POSITION_ESTIMATE, MAVLINK_MESSAGE_INFO_HIGHRES_IMU, MAVLINK_MESSAGE_INFO_OPTICAL_FLOW_RAD, MAVLINK_MESSAGE_INFO_HIL_SENSOR, MAVLINK_MESSAGE_INFO_SIM_STATE, MAVLINK_MESSAGE_INFO_RADIO_STATUS, MAVLINK_MESSAGE_INFO_FILE_TRANSFER_PROTOCOL, MAVLINK_MESSAGE_INFO_TIMESYNC, MAVLINK_MESSAGE_INFO_CAMERA_TRIGGER, MAVLINK_MESSAGE_INFO_HIL_GPS, MAVLINK_MESSAGE_INFO_HIL_OPTICAL_FLOW, MAVLINK_MESSAGE_INFO_HIL_STATE_QUATERNION, MAVLINK_MESSAGE_INFO_SCALED_IMU2, MAVLINK_MESSAGE_INFO_LOG_REQUEST_LIST, MAVLINK_MESSAGE_INFO_LOG_ENTRY, MAVLINK_MESSAGE_INFO_LOG_REQUEST_DATA, MAVLINK_MESSAGE_INFO_LOG_DATA, MAVLINK_MESSAGE_INFO_LOG_ERASE, MAVLINK_MESSAGE_INFO_LOG_REQUEST_END, MAVLINK_MESSAGE_INFO_GPS_INJECT_DATA, MAVLINK_MESSAGE_INFO_GPS2_RAW, MAVLINK_MESSAGE_INFO_POWER_STATUS, MAVLINK_MESSAGE_INFO_SERIAL_CONTROL, MAVLINK_MESSAGE_INFO_GPS_RTK, MAVLINK_MESSAGE_INFO_GPS2_RTK, MAVLINK_MESSAGE_INFO_SCALED_IMU3, MAVLINK_MESSAGE_INFO_DATA_TRANSMISSION_HANDSHAKE, MAVLINK_MESSAGE_INFO_ENCAPSULATED_DATA, MAVLINK_MESSAGE_INFO_DISTANCE_SENSOR, MAVLINK_MESSAGE_INFO_TERRAIN_REQUEST, MAVLINK_MESSAGE_INFO_TERRAIN_DATA, MAVLINK_MESSAGE_INFO_TERRAIN_CHECK, MAVLINK_MESSAGE_INFO_TERRAIN_REPORT, MAVLINK_MESSAGE_INFO_SCALED_PRESSURE2, MAVLINK_MESSAGE_INFO_ATT_POS_MOCAP, MAVLINK_MESSAGE_INFO_SET_ACTUATOR_CONTROL_TARGET, MAVLINK_MESSAGE_INFO_ACTUATOR_CONTROL_TARGET, MAVLINK_MESSAGE_INFO_ALTITUDE, MAVLINK_MESSAGE_INFO_RESOURCE_REQUEST, MAVLINK_MESSAGE_INFO_SCALED_PRESSURE3, MAVLINK_MESSAGE_INFO_FOLLOW_TARGET, MAVLINK_MESSAGE_INFO_CONTROL_SYSTEM_STATE, MAVLINK_MESSAGE_INFO_BATTERY_STATUS, MAVLINK_MESSAGE_INFO_AUTOPILOT_VERSION, MAVLINK_MESSAGE_INFO_LANDING_TARGET, MAVLINK_MESSAGE_INFO_ESTIMATOR_STATUS, MAVLINK_MESSAGE_INFO_WIND_COV, MAVLINK_MESSAGE_INFO_GPS_INPUT, MAVLINK_MESSAGE_INFO_GPS_RTCM_DATA, MAVLINK_MESSAGE_INFO_HIGH_LATENCY, MAVLINK_MESSAGE_INFO_VIBRATION, MAVLINK_MESSAGE_INFO_HOME_POSITION, MAVLINK_MESSAGE_INFO_SET_HOME_POSITION, MAVLINK_MESSAGE_INFO_MESSAGE_INTERVAL, MAVLINK_MESSAGE_INFO_EXTENDED_SYS_STATE, MAVLINK_MESSAGE_INFO_ADSB_VEHICLE, MAVLINK_MESSAGE_INFO_COLLISION, MAVLINK_MESSAGE_INFO_V2_EXTENSION, MAVLINK_MESSAGE_INFO_MEMORY_VECT, MAVLINK_MESSAGE_INFO_DEBUG_VECT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_FLOAT, MAVLINK_MESSAGE_INFO_NAMED_VALUE_INT, MAVLINK_MESSAGE_INFO_STATUSTEXT, MAVLINK_MESSAGE_INFO_DEBUG, MAVLINK_MESSAGE_INFO_SETUP_SIGNING, MAVLINK_MESSAGE_INFO_BUTTON_CHANGE, MAVLINK_MESSAGE_INFO_PLAY_TUNE, MAVLINK_MESSAGE_INFO_CAMERA_INFORMATION, MAVLINK_MESSAGE_INFO_CAMERA_SETTINGS, MAVLINK_MESSAGE_INFO_STORAGE_INFORMATION, MAVLINK_MESSAGE_INFO_CAMERA_CAPTURE_STATUS, MAVLINK_MESSAGE_INFO_CAMERA_IMAGE_CAPTURED, MAVLINK_MESSAGE_INFO_FLIGHT_INFORMATION, MAVLINK_MESSAGE_INFO_MOUNT_ORIENTATION, MAVLINK_MESSAGE_INFO_LOGGING_DATA, MAVLINK_MESSAGE_INFO_LOGGING_DATA_ACKED, MAVLINK_MESSAGE_INFO_LOGGING_ACK, MAVLINK_MESSAGE_INFO_VIDEO_STREAM_INFORMATION, MAVLINK_MESSAGE_INFO_SET_VIDEO_STREAM_SETTINGS, MAVLINK_MESSAGE_INFO_WIFI_CONFIG_AP, MAVLINK_MESSAGE_INFO_PROTOCOL_VERSION, MAVLINK_MESSAGE_INFO_UAVCAN_NODE_STATUS, MAVLINK_MESSAGE_INFO_UAVCAN_NODE_INFO, MAVLINK_MESSAGE_INFO_PARAM_EXT_REQUEST_READ, MAVLINK_MESSAGE_INFO_PARAM_EXT_REQUEST_LIST, MAVLINK_MESSAGE_INFO_PARAM_EXT_VALUE, MAVLINK_MESSAGE_INFO_PARAM_EXT_SET, MAVLINK_MESSAGE_INFO_PARAM_EXT_ACK, MAVLINK_MESSAGE_INFO_OBSTACLE_DISTANCE} # define MAVLINK_MESSAGE_NAMES {{ "ACTUATOR_CONTROL_TARGET", 140 }, { "ADSB_VEHICLE", 246 }, { "ALTITUDE", 141 }, { "ATTITUDE", 30 }, { "ATTITUDE_QUATERNION", 31 }, { "ATTITUDE_QUATERNION_COV", 61 }, { "ATTITUDE_TARGET", 83 }, { "ATT_POS_MOCAP", 138 }, { "AUTH_KEY", 7 }, { "AUTOPILOT_VERSION", 148 }, { "BATTERY_STATUS", 147 }, { "BUTTON_CHANGE", 257 }, { "CAMERA_CAPTURE_STATUS", 262 }, { "CAMERA_IMAGE_CAPTURED", 263 }, { "CAMERA_INFORMATION", 259 }, { "CAMERA_SETTINGS", 260 }, { "CAMERA_TRIGGER", 112 }, { "CHANGE_OPERATOR_CONTROL", 5 }, { "CHANGE_OPERATOR_CONTROL_ACK", 6 }, { "COLLISION", 247 }, { "COMMAND_ACK", 77 }, { "COMMAND_INT", 75 }, { "COMMAND_LONG", 76 }, { "CONTROL_SYSTEM_STATE", 146 }, { "DATA_STREAM", 67 }, { "DATA_TRANSMISSION_HANDSHAKE", 130 }, { "DEBUG", 254 }, { "DEBUG_VECT", 250 }, { "DISTANCE_SENSOR", 132 }, { "ENCAPSULATED_DATA", 131 }, { "ESTIMATOR_STATUS", 230 }, { "EXTENDED_SYS_STATE", 245 }, { "FILE_TRANSFER_PROTOCOL", 110 }, { "FLIGHT_INFORMATION", 264 }, { "FOLLOW_TARGET", 144 }, { "GLOBAL_POSITION_INT", 33 }, { "GLOBAL_POSITION_INT_COV", 63 }, { "GLOBAL_VISION_POSITION_ESTIMATE", 101 }, { "GPS2_RAW", 124 }, { "GPS2_RTK", 128 }, { "GPS_GLOBAL_ORIGIN", 49 }, { "GPS_INJECT_DATA", 123 }, { "GPS_INPUT", 232 }, { "GPS_RAW_INT", 24 }, { "GPS_RTCM_DATA", 233 }, { "GPS_RTK", 127 }, { "GPS_STATUS", 25 }, { "HEARTBEAT", 0 }, { "HIGHRES_IMU", 105 }, { "HIGH_LATENCY", 234 }, { "HIL_ACTUATOR_CONTROLS", 93 }, { "HIL_CONTROLS", 91 }, { "HIL_GPS", 113 }, { "HIL_OPTICAL_FLOW", 114 }, { "HIL_RC_INPUTS_RAW", 92 }, { "HIL_SENSOR", 107 }, { "HIL_STATE", 90 }, { "HIL_STATE_QUATERNION", 115 }, { "HOME_POSITION", 242 }, { "LANDING_TARGET", 149 }, { "LOCAL_POSITION_NED", 32 }, { "LOCAL_POSITION_NED_COV", 64 }, { "LOCAL_POSITION_NED_SYSTEM_GLOBAL_OFFSET", 89 }, { "LOGGING_ACK", 268 }, { "LOGGING_DATA", 266 }, { "LOGGING_DATA_ACKED", 267 }, { "LOG_DATA", 120 }, { "LOG_ENTRY", 118 }, { "LOG_ERASE", 121 }, { "LOG_REQUEST_DATA", 119 }, { "LOG_REQUEST_END", 122 }, { "LOG_REQUEST_LIST", 117 }, { "MANUAL_CONTROL", 69 }, { "MANUAL_SETPOINT", 81 }, { "MEMORY_VECT", 249 }, { "MESSAGE_INTERVAL", 244 }, { "MISSION_ACK", 47 }, { "MISSION_CLEAR_ALL", 45 }, { "MISSION_COUNT", 44 }, { "MISSION_CURRENT", 42 }, { "MISSION_ITEM", 39 }, { "MISSION_ITEM_INT", 73 }, { "MISSION_ITEM_REACHED", 46 }, { "MISSION_REQUEST", 40 }, { "MISSION_REQUEST_INT", 51 }, { "MISSION_REQUEST_LIST", 43 }, { "MISSION_REQUEST_PARTIAL_LIST", 37 }, { "MISSION_SET_CURRENT", 41 }, { "MISSION_WRITE_PARTIAL_LIST", 38 }, { "MOUNT_ORIENTATION", 265 }, { "NAMED_VALUE_FLOAT", 251 }, { "NAMED_VALUE_INT", 252 }, { "NAV_CONTROLLER_OUTPUT", 62 }, { "OBSTACLE_DISTANCE", 330 }, { "OPTICAL_FLOW", 100 }, { "OPTICAL_FLOW_RAD", 106 }, { "PARAM_EXT_ACK", 324 }, { "PARAM_EXT_REQUEST_LIST", 321 }, { "PARAM_EXT_REQUEST_READ", 320 }, { "PARAM_EXT_SET", 323 }, { "PARAM_EXT_VALUE", 322 }, { "PARAM_MAP_RC", 50 }, { "PARAM_REQUEST_LIST", 21 }, { "PARAM_REQUEST_READ", 20 }, { "PARAM_SET", 23 }, { "PARAM_VALUE", 22 }, { "PING", 4 }, { "PLAY_TUNE", 258 }, { "POSITION_TARGET_GLOBAL_INT", 87 }, { "POSITION_TARGET_LOCAL_NED", 85 }, { "POWER_STATUS", 125 }, { "PROTOCOL_VERSION", 300 }, { "RADIO_STATUS", 109 }, { "RAW_IMU", 27 }, { "RAW_PRESSURE", 28 }, { "RC_CHANNELS", 65 }, { "RC_CHANNELS_OVERRIDE", 70 }, { "RC_CHANNELS_RAW", 35 }, { "RC_CHANNELS_SCALED", 34 }, { "REQUEST_DATA_STREAM", 66 }, { "RESOURCE_REQUEST", 142 }, { "SAFETY_ALLOWED_AREA", 55 }, { "SAFETY_SET_ALLOWED_AREA", 54 }, { "SCALED_IMU", 26 }, { "SCALED_IMU2", 116 }, { "SCALED_IMU3", 129 }, { "SCALED_PRESSURE", 29 }, { "SCALED_PRESSURE2", 137 }, { "SCALED_PRESSURE3", 143 }, { "SERIAL_CONTROL", 126 }, { "SERVO_OUTPUT_RAW", 36 }, { "SETUP_SIGNING", 256 }, { "SET_ACTUATOR_CONTROL_TARGET", 139 }, { "SET_ATTITUDE_TARGET", 82 }, { "SET_GPS_GLOBAL_ORIGIN", 48 }, { "SET_HOME_POSITION", 243 }, { "SET_MODE", 11 }, { "SET_POSITION_TARGET_GLOBAL_INT", 86 }, { "SET_POSITION_TARGET_LOCAL_NED", 84 }, { "SET_VIDEO_STREAM_SETTINGS", 270 }, { "SIM_STATE", 108 }, { "STATUSTEXT", 253 }, { "STORAGE_INFORMATION", 261 }, { "SYSTEM_TIME", 2 }, { "SYS_STATUS", 1 }, { "TERRAIN_CHECK", 135 }, { "TERRAIN_DATA", 134 }, { "TERRAIN_REPORT", 136 }, { "TERRAIN_REQUEST", 133 }, { "TIMESYNC", 111 }, { "UAVCAN_NODE_INFO", 311 }, { "UAVCAN_NODE_STATUS", 310 }, { "V2_EXTENSION", 248 }, { "VFR_HUD", 74 }, { "VIBRATION", 241 }, { "VICON_POSITION_ESTIMATE", 104 }, { "VIDEO_STREAM_INFORMATION", 269 }, { "VISION_POSITION_ESTIMATE", 102 }, { "VISION_SPEED_ESTIMATE", 103 }, { "WIFI_CONFIG_AP", 299 }, { "WIND_COV", 231 }} # if MAVLINK_COMMAND_24BIT # include "../mavlink_get_info.h" # endif #endif #ifdef __cplusplus } #endif // __cplusplus #endif // MAVLINK_COMMON_H