FROM ubuntu:18.04

RUN rm -rf /et/apt/sources.list \
    && echo "deb http://mirrors.tuna.tsinghua.edu.cn/ubuntu/ bionic main restricted universe multiverse" >> /etc/apt/sources.list \
    && echo "deb http://mirrors.tuna.tsinghua.edu.cn/ubuntu/ bionic-updates main restricted universe multiverse" >> /etc/apt/sources.list \
    && echo "deb http://mirrors.tuna.tsinghua.edu.cn/ubuntu/ bionic-backports main restricted universe multiverse" >> /etc/apt/sources.list \
    && echo "deb http://mirrors.tuna.tsinghua.edu.cn/ubuntu/ bionic-security main restricted universe multiverse" >> /etc/apt/sources.list

RUN apt-get update && apt-get install -y \
    git \
    ssh \
    tar \
    gzip \
    ca-certificates \
    gcc \
    g++ \
    pkg-config \
    uuid-dev \
    libssl-dev \
    curl \
    unzip \
    bzip2 \
    python \
    autoconf \
    automake \
    libtool \
    zlib1g-dev \
    libcurl4-openssl-dev \
    dpkg \
    libjson-perl \
    libperlio-gzip-perl \
    libdigest-perl-md5-perl \
    openjdk-8-jdk

# install g++ 8.4.0
# if it is not accessible, replace it with the link below
# http://ftp.gnu.org/gnu/gcc/gcc-8.4.0/gcc-8.4.0.tar.gz
RUN wget https://tugraph-web.oss-cn-beijing.aliyuncs.com/tugraph/deps/gcc-8.4.0.tar.gz \
    && tar -xvf gcc-8.4.0.tar.gz && cd gcc-8.4.0 \
    && ./contrib/download_prerequisites && mkdir build && cd build \
    && ../configure CFLAGS=-fPIC CXXFLAGS=-fPIC -enable-checking=release -enable-languages=c,c++ -disable-multilib \
    && make -j4 && make install \
    && cp  ./x86_64-*-linux-gnu/libstdc++-v3/src/.libs/libstdc++.so.6.0.25 /usr/lib/ \
    && cd /usr/lib && ln -sf libstdc++.so.6.0.25 libstdc++.so.6 \
    && rm -rf /gcc-* && ln -s /usr/local/bin/gcc /usr/local/bin/cc

# install python3
# if it is not accessible, replace it with the link below
# https://www.python.org/ftp/python/3.6.9/Python-3.6.9.tgz
RUN wget https://tugraph-web.oss-cn-beijing.aliyuncs.com/tugraph/deps/Python-3.6.9.tgz \
    && tar xf Python-3.6.9.tgz && cd Python-3.6.9 && ./configure --prefix=/usr/local \
    && make -j4 && make install \
    && python3 -m pip install --upgrade pip -i https://pypi.tuna.tsinghua.edu.cn/simple --trusted-host pypi.tuna.tsinghua.edu.cn \
    && python3 -m pip install pexpect requests pytest httpx cython==3.0.0a11 -i https://pypi.tuna.tsinghua.edu.cn/simple --trusted-host pypi.tuna.tsinghua.edu.cn \
    && rm -rf /Python*

# install cmake
# if it is not accessible, replace it with the link below
# https://cmake.org/files/v3.25/cmake-3.25.2.tar.gz
RUN wget https://tugraph-web.oss-cn-beijing.aliyuncs.com/tugraph/deps/cmake-3.25.2.tar.gz \
    && tar xf cmake-3.25.2.tar.gz && cd cmake-3.25.2 \
    && ./bootstrap && make -j4 && make install && rm -rf /cmake-3.*

# install boost-1.68
# if it is not accessible, replace it with the link below
# https://boostorg.jfrog.io/artifactory/main/release/1.68.0/source/boost_1_68_0.tar.gz
RUN wget https://tugraph-web.oss-cn-beijing.aliyuncs.com/tugraph/deps/boost_1_68_0.tar.gz \
    && tar xf boost_1_68_0.tar.gz && cd boost_1_68_0 \
    && ./bootstrap.sh --with-libraries=system,random,thread,filesystem,chrono,atomic,date_time,regex,stacktrace \
    && ./b2 -j4 cxxflags="-std=c++14 -fPIC" install && rm -rf /boost_*

# install protobuf
# if it is not accessible, replace it with the link below
# https://github.com/protocolbuffers/protobuf/archive/v3.6.0.tar.gz -O protobuf-3.6.0.tar.gz
RUN wget https://tugraph-web.oss-cn-beijing.aliyuncs.com/tugraph/deps/protobuf-3.6.0.tar.gz \
    && tar xf protobuf-3.6.0.tar.gz && cd protobuf-3.6.0 \
    && ./autogen.sh && ./configure CFLAGS='-fPIC' CXXFLAGS='-fPIC' --prefix=/usr/local \
    && make -j4 && make install && ldconfig && rm -rf /protobuf-*

# install snappy
# if it is not accessible, replace it with the link below
# https://github.com/google/snappy/archive/refs/tags/1.1.9.zip
# https://github.com/google/googletest/archive/refs/heads/v1.10.x.zip
# https://github.com/google/benchmark/archive/bf585a2789e30585b4e3ce6baf11ef2750b54677.zip
RUN wget https://tugraph-web.oss-cn-beijing.aliyuncs.com/tugraph/deps/snappy-1.1.9.zip \
    && unzip snappy-1.1.9.zip && mv snappy-1.1.9 snapppy && cd snapppy/third_party/ \
    && wget https://tugraph-web.oss-cn-beijing.aliyuncs.com/tugraph/deps/googletest-v1.10.x.zip \
    && unzip googletest-v1.10.x.zip && rm -rf googletest && mv googletest-1.10.x googletest \
    && wget https://tugraph-web.oss-cn-beijing.aliyuncs.com/tugraph/deps/benchmark.zip \
    && unzip benchmark.zip && rm -rf benchmark && mv benchmark-bf585a2789e30585b4e3ce6baf11ef2750b54677 benchmark \
    && cd .. && mkdir build && cd build \
    && cmake -DCMAKE_CXX_FLAGS=-fPIC .. && make -j4 && make install && rm -rf /snappy*

# install gflags
# if it is not accessible, replace it with the link below
# https://github.com/gflags/gflags/archive/v2.2.1.tar.gz -O gflags-2.2.1.tar.gz
RUN wget https://tugraph-web.oss-cn-beijing.aliyuncs.com/tugraph/deps/gflags-2.2.1.tar.gz \
    && tar xf gflags-2.2.1.tar.gz && cd gflags-2.2.1 \
    && mkdir build && cd build && cmake -DCMAKE_CXX_FLAGS=-fPIC .. \
    && make -j4 && make install && rm -rf /gflags-*

# install leveldb
# if it is not accessible, replace it with the link below
# https://github.com/google/leveldb/archive/refs/tags/v1.20.zip
RUN wget https://tugraph-web.oss-cn-beijing.aliyuncs.com/tugraph/deps/leveldb-v1.20.zip \
    && unzip leveldb-v1.20.zip && mv leveldb-1.20 leveldb \
    && cd leveldb && CFLAGS="-fPIC" CXXFLAGS="-fPIC" make -j4 \
    && cp -r ./include/leveldb/ /usr/local/include/ \
    && cp ./out-shared/libleveldb.so.1.20 /usr/local/lib/ \
    && cp ./out-static/libleveldb.a /usr/local/lib/ \
    && ln -s /usr/local/lib/libleveldb.so.1.20 /usr/local/lib/libleveldb.so.1 \
    && ln -s /usr/local/lib/libleveldb.so.1.20 /usr/local/lib/libleveldb.so \
    && rm -rf /leveldb*

# install node.js
# if it is not accessible, replace it with the link below
# https://registry.npmmirror.com/-/binary/node/v16.6.0/node-v16.6.0-linux-x64.tar.gz
RUN wget https://tugraph-web.oss-cn-beijing.aliyuncs.com/tugraph/deps/node-v16.6.0-linux-x64.tar.gz \
    && tar xvf node-v16.6.0-linux-x64.tar.gz && cd node-v16.6.0-linux-x64/ \
    && ln -s /node-v16.6.0-linux-x64/bin/npm /usr/local/bin/ \
    && ln -s /node-v16.6.0-linux-x64/bin/node /usr/local/bin/ \
    && npm config set registry https://registry.npmmirror.com \
    && rm -rf /node-v16.6.0-linux-x64.tar.gz


# install lcov
# if it is not accessible, replace it with the link below
# https://mirrors.edge.kernel.org/ubuntu/pool/universe/l/lcov/lcov_1.14-2_all.deb \
RUN wget https://tugraph-web.oss-cn-beijing.aliyuncs.com/tugraph/deps/lcov_1.14-2_all.deb \
    && dpkg -i lcov_1.14-2_all.deb \
    && rm lcov_1.14-2_all.deb 

#install maven
# if it is not accessible, replace it with the link below
# https://dlcdn.apache.org/maven/maven-3/3.8.7/binaries/apache-maven-3.8.7-bin.tar.gz
RUN cd opt \
    && wget --no-check-certificate https://tugraph-web.oss-cn-beijing.aliyuncs.com/tugraph/deps/apache-maven-3.8.7-bin.tar.gz \
    && tar xf apache-maven-3.8.7-bin.tar.gz \
    && rm apache-maven-*.tar.gz

ARG CMAKE_OPT="-DCMAKE_BUILD_TYPE=Release -DBUILD_SHARED_LIBS=0 -DBUILD_TESTS=0 -DBUILD_SAMPLES=0 -DCMAKE_C_COMPILER=gcc -DCMAKE_CXX_COMPILER=g++"

# brpc
# if it is not accessible, replace it with the link below
# wget https://github.com/apache/incubator-brpc/archive/refs/heads/release-1.2.zip
RUN wget https://tugraph-web.oss-cn-beijing.aliyuncs.com/tugraph/deps/brpc-release-1.2.zip \
    && unzip brpc-release-1.2.zip && mv brpc-release-1.2 brpc && cd /brpc && mkdir build && cd build \
    && cmake $CMAKE_OPT -DBUILD_UNIT_TESTS=0 .. && make -j && make install \
    && rm -rf /brpc*

# cpprestsdk
# if it is not accessible, replace it with the link below
# https://github.com/microsoft/cpprestsdk/archive/refs/tags/v2.10.18.zip
# https://github.com/zaphoyd/websocketpp/archive/56123c87598f8b1dd471be83ca841ceae07f95ba.zip
RUN wget https://tugraph-web.oss-cn-beijing.aliyuncs.com/tugraph/deps/cpprestsdk-v2.10.18.zip \
    && unzip cpprestsdk-v2.10.18.zip && mv cpprestsdk-2.10.18 cpprestsdk && cd /cpprestsdk/Release/libs/ \
    && wget https://tugraph-web.oss-cn-beijing.aliyuncs.com/tugraph/deps/websocketpp.zip \
    && unzip websocketpp.zip && rm -rf websocketpp && mv websocketpp-56123c87598f8b1dd471be83ca841ceae07f95ba websocketpp \
    && cd .. && mkdir build && cd build \
    && cmake $CMAKE_OPT -DCMAKE_CXX_FLAGS=-fPIC -Wno-error=unused-parameter -DBoost_USE_STATIC_LIBS=1 .. && make -j && make install \
    && rm -rf /cpprestsdk*  

# googletest
# if it is not accessible, replace it with the link below
# https://github.com/google/googletest/archive/refs/tags/release-1.12.1.zip
RUN wget https://tugraph-web.oss-cn-beijing.aliyuncs.com/tugraph/deps/googletest-release-1.12.1.zip \
    && unzip googletest-release-1.12.1.zip && mv googletest-release-1.12.1 googletest && cd /googletest && mkdir build && cd build \
    && cmake $CMAKE_OPT .. && make -j && make install \
    && rm -rf /googletest*

# jwt-cpp
# if it is not accessible, replace it with the link below
# https://github.com/Thalhammer/jwt-cpp/archive/refs/tags/v0.6.0.zip
RUN wget https://tugraph-web.oss-cn-beijing.aliyuncs.com/tugraph/deps/jwt-v0.6.0.zip \
    && unzip jwt-v0.6.0.zip && mv jwt-cpp-0.6.0 jwt-cpp && cd /jwt-cpp && cp -r include/jwt-cpp/ /usr/local/include \
    && cp -r include/picojson/ /usr/local/include \
    && rm -rf /jwt-cpp*
  
# prometheus-cpp-client
# if it is not accessible, replace it with the link below
# https://github.com/jupp0r/prometheus-cpp/archive/refs/tags/v1.0.1.zip
# https://github.com/civetweb/civetweb/archive/eefb26f82b233268fc98577d265352720d477ba4.zip
# https://github.com/google/googletest/archive/e2239ee6043f73722e7aa812a459f54a28552929.zip
RUN wget https://tugraph-web.oss-cn-beijing.aliyuncs.com/tugraph/deps/prometheus-cpp-client-v1.0.1.zip \
    && unzip prometheus-cpp-client-v1.0.1.zip && mv prometheus-cpp-1.0.1 prometheus-cpp-client && cd /prometheus-cpp-client/3rdparty/ \
    && wget https://tugraph-web.oss-cn-beijing.aliyuncs.com/tugraph/deps/civetweb.zip \
    && unzip civetweb.zip && rm -rf civetweb \
    && mv civetweb-eefb26f82b233268fc98577d265352720d477ba4 civetweb \
    && wget https://tugraph-web.oss-cn-beijing.aliyuncs.com/tugraph/deps/googletest.zip \
    && unzip googletest.zip && rm -rf googletest \
    && mv googletest-e2239ee6043f73722e7aa812a459f54a28552929 googletest \
    && cd .. && mkdir build && cd build \
    && cmake $CMAKE_OPT .. && make -j && make install \
    && rm -rf /prometheus-cpp-client*

# pybind11
# if it is not accessible, replace it with the link below
# https://github.com/pybind/pybind11/archive/refs/tags/v2.10.0.zip
RUN wget https://tugraph-web.oss-cn-beijing.aliyuncs.com/tugraph/deps/pybind11-v2.10.0.zip \
    && unzip pybind11-v2.10.0.zip && mv pybind11-2.10.0 pybind11 && cd /pybind11 && cp -r include/pybind11 /usr/local/include \
    && rm -rf /pybind11*

# braft
# if it is not accessible, replace it with the link below
# wget https://github.com/baidu/braft/archive/refs/tags/v1.1.2.zip
RUN wget https://tugraph-web.oss-cn-beijing.aliyuncs.com/tugraph/deps/braft-v1.1.2.zip \
    && unzip braft-v1.1.2.zip && mv braft-1.1.2/ braft && cd braft \
    && mkdir build && cd build && cmake $CMAKE_OPT .. && make -j && make install \
    && rm -rf /braft*

# jemalloc
# if it is not accessible, replace it with the link below
# https://github.com/jemalloc/jemalloc/archive/refs/tags/5.3.0.tar.gz
RUN wget https://tugraph-web.oss-cn-beijing.aliyuncs.com/tugraph/deps/jemalloc-5.3.0.tar.gz \
   && tar zxf jemalloc-5.3.0.tar.gz && cd jemalloc-5.3.0 && ./autogen.sh && make -j && make install \
   && rm -rf /jemalloc*

# rocksdb
# if it is not accessible, replace it with the link below
# https://github.com/facebook/rocksdb/archive/refs/tags/v7.8.3.tar.gz
RUN wget https://tugraph-web.oss-cn-beijing.aliyuncs.com/tugraph/deps/rocksdb-v7.8.3.tar.gz \
  && tar zxf rocksdb-v7.8.3.tar.gz && cd rocksdb-7.8.3 && cmake -DCMAKE_BUILD_TYPE=Release -DPORTABLE=ON -DFORCE_SSE42=ON -DWITH_JEMALLOC=ON \
  && make -j6 && make install && rm -rf /rocksdb*

RUN sed -i '3 s/-lgomp/-l:libgomp.a/' /usr/local/lib64/libgomp.spec 

ENV JAVA_HOME=/usr/lib/jvm/java-8-openjdk-amd64/jre \
    LD_LIBRARY_PATH=/usr/local/lib64:/usr/local/lib:/usr/lib/jvm/java-1.8.0-openjdk-amd64/jre/lib/amd64/:$LD_LIBRARY_PATH \
    PYTHONPATH=/usr/local/lib64:$PYTHONPATH \
    PATH=/opt/apache-maven-3.8.7/bin:/usr/lib/jvm/java-8-openjdk-amd64/jre/bin:$PATH