---
 # Note to translators:
 #   most languages don't have two ways to pronounce 'a' -- if not need, remove the rules and change "B-Z" to "A-Z"
 #   some languages say the word for "uppercase" after the letter. Make sure to change that where appropriate by moving some code around
 - "a": 
    - test: 
        if: "$TTS='none'"
        then: [t: "a"]                          	#  long "a" sound in all speech engines I tested (espeak, MS SAPI, eloquence,	(en: 'eigh', google translation)
        else: [spell: "'a'"]                    	#     AWS Polly, ReadSpeaker, NaturalReader, google cloud, nuance, ibm watson)
 - "b-z": 
    - test: 
        if: "$TTS='none'"
        then: [t: "a"]                          	# 	(en: '.', google translation)
        else: [spell: "'.'"]                       

 # Capital letters are a little tricky: users can pick their favorite word (something that was requested) and 
 # screen readers have options to use pitch changes or beeps instead of or in addition to say "cap"
 # Also, if a user can see the screen, they probably don't need to hear "cap", but if they specified an override, they must want to hear the override.

 - "A":
    - test: 
        if: "$CapitalLetters_Beep"
        then:
        - audio:
            value: "beep.mp4"
            replace: []
    - test: 
        if: "$CapitalLetters_UseWord"
        then_test:
          if: "$SpeechOverrides_CapitalLetters = ''"
          then_test:
            if: "$Impairment = 'Blindness'"
            then: [t: "大寫"]                     	# 	(en: 'cap', google translation)
          else: [x: "$SpeechOverrides_CapitalLetters"]
    - pitch:
        value: "$CapitalLetters_Pitch"
        replace:
        - test:
            if: "$TTS='none'"
            then: [t: "A"]                      	# 	(en: 'eigh', google translation)
            else: [spell: "'a'"]
            
 - "B-Z":
    - test: 
        if: "$CapitalLetters_Beep"
        then:
        - audio:
            value: "beep.mp4"
            replace: []
    - test: 
        if: "$CapitalLetters_UseWord"
        then_test:
          if: "$SpeechOverrides_CapitalLetters = ''"
          then_test:
            if: "$Impairment = 'Blindness'"
            then: [t: "大寫"]                     	# 	(en: 'cap', google translation)
          else: [x: "$SpeechOverrides_CapitalLetters"] 
    - pitch:
        value: "$CapitalLetters_Pitch"
        # note: processing of ranges converts '.' into the character, so it needs to be in quotes below
        replace: [spell: "translate('.', 'BCDEFGHIJKLMNOPQRSTUVWXYZ', 'bcdefghijklmnopqrstuvwxyz')"]

 - "0-9": [t: "A"]                              	# 	(en: '.', google translation)

 - "!":                                         	#  0x21
    - test:
        if: "ancestor-or-self::*[contains(@data-intent-property, ':structure:')]"
        then_test:
            if: "$Verbosity = 'Terse'"
            then: [t: "砰"]                      	#  0x21	(en: 'bang', google translation)
            else: [t: "階層"]                     	#  0x21	(en: 'exclamation point')
        else: [t: "階層"]                         	#  0x21	(en: 'factorial')
          
 - "\"": [t: "引號"]                              	#  0x22	(en: 'quotation mark', google translation)
 - "#": [t: "數字"]                               	#  0x23	(en: 'number', google translation)
 - "$": [t: "美元"]                               	#  0x24	(en: 'dollars', google translation)
 - "%": [t: "百分"]                               	#  0x25	(en: 'percent', google translation)
 - "&": [t: "andand"]                           	#  0x26	(en: 'ampersand', google translation)
 - "'": [t: "單引號"]                              	#  0x27	(en: 'apostrophe')
 - "(":                                         	#  0x28
    - test:
        if: $SpeechStyle = 'ClearSpeak' or $SpeechStyle = 'SimpleSpeak'
        then_test:
            if: "$Verbosity='Terse'"
            then: [t: "打開"]                     	#  0x28	(en: 'open', google translation)
            else: [t: "左小括"]                    	#  0x28	(en: 'open paren')
        else: [t: "左小括"]                        	#  0x28	(en: 'left paren')
 - ")":                                         	#  0x29
    - test:
        if: $SpeechStyle = 'ClearSpeak' or $SpeechStyle = 'SimpleSpeak'
        then_test:
            if: "$Verbosity='Terse'"
            then: [t: "關閉"]                     	#  0x29	(en: 'close', google translation)
            else: [t: "右小括"]                    	#  0x29	(en: 'close paren')
        else: [t: "右小括"]                        	#  0x29	(en: 'right paren')

 - "*":                                         	#  0x2a
    test:
        if: "parent::*[name(.)='msup' or name(.)='msubsup' or name(.)='skip-super']"
        then: [t: "星星"]                         	#  0x2a	(en: 'star', google translation)
        else: [t: "乘以"]                         	#  0x2a	(en: 'times')
 - "+": [t: "加"]                                	#  0x2b	(en: 'plus')
 - ",":                                         	#  0x2c
    # the following deals with the interaction of "," with "…" which sometimes wants the ',' to be silent
    # that this test is here and not with "…" is not ideal, but seems simplest
     test:
        if:
            - "$SpeechStyle != 'ClearSpeak' or $ClearSpeak_Ellipses = 'Auto' or "
               # must be ClearSpeak and $ClearSpeak_Ellipses = 'AndSoOn'
               # speak "comma" when not adjacent to '…'
            - "( following-sibling::*[1][text()!= '…'] and preceding-sibling::*[1][text()!='…']  ) or "
               # except if expression starts with '…'
            - "../*[1][text()='…'] "
        then: [t: "逗號"]                         	# 	(en: 'comma', google translation)
        # else silent

 - "-": [t: "減"]                                	#  0x2d	(en: 'minus')
 - ".":                                         	#  0x2e
    - test:
        if: "parent::*[1][self::m:mn]"
        then: [t: "觀點"]                         	# 	(en: 'point', google translation)
        else: [t: "點"]                          	# 	(en: 'dot', google translation)
 - "/": [t: "除以"]                               	#  0x2f	(en: 'divided by')
 - ":": [t: "冒號"]                               	#  0x3a	(en: 'colon')
 - ";": [t: "分號"]                               	#  0x3b	(en: 'semicolon', google translation)
 - "<":                                         	#  0x3c
     - test: 
         if: "$Verbosity!='Terse'"
         then: [t: "是"]                         	# 	(en: 'is', google translation)
     - t: "小於"                                  	# 	(en: 'less than')
 - "=":                                         	#  0x3d
    - test: 
        if: "$Verbosity!='Terse'"
        then: [t: "等於"]                         	# 	(en: 'is equal to', google translation)
        else: [t: "等於"]                         	# 	(en: 'equals')

 - ">":                                         	#  0x3e
     - test: 
         if: "$Verbosity!='Terse'"
         then: [t: "是"]                         	# 	(en: 'is', google translation)
     - t: "大於"                                  	# 	(en: 'greater than')
 - "?": [t: "問號"]                               	#  0x3f	(en: 'question mark', google translation)
 - "@": [t: "在標誌"]                              	#  0x40	(en: 'at sign', google translation)
 - "[":                                         	#  0x5b
    - test:
        if: $SpeechStyle = 'ClearSpeak' or $SpeechStyle = 'SimpleSpeak'
        then: [t: "打開括號"]                       	# 	(en: 'open bracket', google translation)
        else: [t: "左中括"]                        	# 	(en: 'left bracket')
 - "\\": [t: "左中括"]                             	#  0x5c	(en: 'back slash')
 - "]":                                         	#  0x5d
    - test:
        if: $SpeechStyle = 'ClearSpeak' or $SpeechStyle = 'SimpleSpeak'
        then: [t: "關閉括號"]                       	# 	(en: 'close bracket', google translation)
        else: [t: "右中括"]                        	# 	(en: 'right bracket')
 - "^": [t: "帽子"]                               	#  0x5e	(en: 'hat', google translation)
 - "_": [t: "在酒吧下"]                             	#  0x5f	(en: 'under bar', google translation)
 - "`": [t: "墳"]                                	#  0x60	(en: 'grave', google translation)
 - "{":                                         	#  0x7b
    - test:
        if: $SpeechStyle = 'ClearSpeak' or $SpeechStyle = 'SimpleSpeak'
        then: [t: "打開支撐"]                       	# 	(en: 'open brace', google translation)
        else: [t: "左大括"]                        	# 	(en: 'left brace')
 - "|":                                         	#  0x7c
    # note: for ClearSpeak and SimpleSpeak, "|" inside of sets is handled at the mrow level, same for 'sets'
     - test:
        - if: "$SpeechStyle != 'ClearSpeak' or not(preceding-sibling::*) or not(following-sibling::*)"
          then: [t: "垂線"]                       	# 	(en: 'vertical line', google translation)
        - else_if: "$ClearSpeak_VerticalLine = 'SuchThat'"
          then: [t: "這樣"]                       	# 	(en: 'such that', google translation)
        - else_if: "$ClearSpeak_VerticalLine = 'Given'"  
          then: [t: "給出"]                       	# 	(en: 'given', google translation)
        - else: [t: "豎線"]                       	# 	(en: 'divides')

 - "}":                                         	#  0x7d
    - test:
        if: $SpeechStyle = 'ClearSpeak' or $SpeechStyle = 'SimpleSpeak'
        then: [t: "閉合支撐"]                       	# 	(en: 'close brace', google translation)
        else: [t: "右大括"]                        	# 	(en: 'right brace')

 - "~": [t: "蒂爾德"]                              	#  0x7e	(en: 'tilde', google translation)
 - " ":                                         	#  0xa0
    - test:
        if: "@data-empty-in-2D and ../../../../*[name(.)!='equations']"
        then: [t: "空的"]                         	#  want to say something for fraction (etc) with empty child	(en: 'empty', google translation)
        else: [t: ""]                            

 - "¬": [t: "不是"]                               	#  0xac	(en: 'not', google translation)
 - "°": [t: "學位"]                               	#  0xb0	(en: 'degrees', google translation)
 - "±": [t: "加減"]                               	#  0xb1	(en: 'plus or minus')
 - "´": [t: "急性"]                               	#  0xb4	(en: 'acute', google translation)
 - "·":                                         	#  0xB7
    - test:
        if: "$SpeechStyle != 'ClearSpeak' or $ClearSpeak_MultSymbolDot = 'Auto'"
        then: [t: "時代"]                         	# 	(en: 'times', google translation)
        else: [t: "內積"]                         	# 	(en: 'dot')
 - "×":                                         	#  0xd7
    - test:
        if: "$SpeechStyle != 'ClearSpeak' or $ClearSpeak_MultSymbolX = 'Auto'"
        then: [t: "時代"]                         	# 	(en: 'times', google translation)
        else_test:
            if: $ClearSpeak_MultSymbolX = 'By'
            then: [t: "經過"]                     	# 	(en: 'by', google translation)
            else: [t: "乘以"]                     	# 	(en: 'cross')
 - "÷": [t: "除以"]                               	#  0xf7	(en: 'divided by')
 - "̀": [t: "嚴重的口音裝飾"]                          	#  0x300	(en: 'grave accent embellishment', google translation)
 - "́": [t: "急性口音裝飾"]                           	#  0x301	(en: 'acute accent embellishment', google translation)
 - "̂": [t: "繞過額的口音裝飾"]                         	#  0x302	(en: 'circumflex accent embellishment', google translation)
 - "̃": [t: "tilde點綴"]                          	#  0x303	(en: 'tilde embellishment', google translation)
 - "̄": [t: "馬克龍點綴"]                            	#  0x304	(en: 'macron embellishment', google translation)
 - "̅": [t: "額外的點綴"]                            	#  0x305	(en: 'overbar embellishment', google translation)
 - "̆": [t: "布雷夫"]                              	#  0x306	(en: 'breve', google translation)
 - "̇": [t: "點點上方"]                             	#  0x307	(en: 'dot above embellishment', google translation)

   # Note: ClearSpeak has pref TriangleSymbol for "Δ", but that is wrong
 - "Α-Ω": 
    - test: 
        if: "$CapitalLetters_Beep"
        then:
        - audio:
            value: "beep.mp4"
            replace: []
    - test: 
        if: "$CapitalLetters_UseWord"
        then_test:
          if: "$SpeechOverrides_CapitalLetters = ''"
          then_test:
            if: "$Impairment = 'Blindness'"
            then: [t: "大寫"]                     	# 	(en: 'cap', google translation)
          else: [x: "$SpeechOverrides_CapitalLetters"] 
    - pitch:
        value: "$CapitalLetters_Pitch"
        # note: processing of ranges converts '.' into the character, so it needs to be in quotes below
        replace: [spell: "translate('.', 'ΑΒΓΔΕΖΗΘΙΚΛΜΝΞΟΠΡ΢ΣΤΥΦΧΨΩ', 'αβγδεζηθικλμνξοπρςστυφχψω')"]

 - "α": [t: "Alpha"]                            	#  0x3b1	(en: 'alpha')
 - "β": [t: "Beta"]                             	#  0x3b2	(en: 'beta')
 - "γ": [t: "Gamma"]                            	#  0x3b3	(en: 'gamma')
 - "δ": [t: "Delta"]                            	#  0x3b4	(en: 'delta')
 - "ε": [t: "Epsilon"]                          	#  0x3b5	(en: 'epsilon')
 - "ζ": [t: "Zeta"]                             	#  0x3b6	(en: 'zeta')
 - "η": [t: "Eta"]                              	#  0x3b7	(en: 'eta')
 - "θ": [t: "Theta"]                            	#  0x3b8	(en: 'theta')
 - "ι": [t: "Lota"]                             	#  0x3b9	(en: 'iota')
 - "κ": [t: "Kappa"]                            	#  0x3ba	(en: 'kappa')
 - "λ": [t: "Lamda"]                            	#  0x3bb	(en: 'lambda')
 - "μ": [t: "Mu"]                               	#  0x3bc	(en: 'mu')
 - "ν": [t: "Nu"]                               	#  0x3bd	(en: 'nu')
 - "ξ": [t: "Xi"]                               	#  0x3be	(en: 'zai')
 - "ο": [t: "Omicron"]                          	#  0x3bf	(en: 'omicron')
 - "π": [t: "Pi"]                               	#  0x3c0	(en: 'pi')
 - "ρ": [t: "Rho"]                              	#  0x3c1	(en: 'rho')
 - "ς": [t: "Final Sigma"]                      	#  0x3c2	(en: 'final sigma')
 - "σ": [t: "Sigma"]                            	#  0x3c3	(en: 'sigma')
 - "τ": [t: "Tau"]                              	#  0x3c4	(en: 'tau')
 - "υ": [t: "Upsilon"]                          	#  0x3c5	(en: 'upsilon')
 - "φ": [t: "Phi"]                              	#  0x3c6	(en: 'phi')
 - "χ": [t: "Chi"]                              	#  0x3c7	(en: 'chi')
 - "ψ": [t: "Psi"]                              	#  0x3c8	(en: 'psi')
 - "ω": [t: "Omega"]                            	#  0x3c9	(en: 'omega')
 - "ϕ": [t: "Phi"]                              	#  0x3d5	(en: 'phi')
 - "ϖ": [t: "Pi"]                               	#  0x3d6	(en: 'pi')
 - "ϵ": [t: "Lunate Epsilon"]                   	#  0x3f5	(en: 'epsilon')
 - "϶": [t: "Reversed Lunate Epsilon"]          	#  0x3f6	(en: 'reversed epsilon')

 - "–": [t: "en dash"]                          	#  0x2013	(google translation)
 - "—": [t: "em dash"]                          	#  0x2014	(google translation)
 - "―": [t: "單槓"]                               	#  0x2015	(en: 'horizontal bar', google translation)
 - "‖": [t: "雙垂直線"]                             	#  0x2016	(en: 'double vertical line', google translation)
 - "…":                                         	#  0x2026
    test:
        if:
            - "$SpeechStyle != 'ClearSpeak' or $ClearSpeak_Ellipses = 'Auto' or"
               # must be ClearSpeak and $ClearSpeak_Ellipses = 'AndSoOn'
               # speak '…' as 'and so on...' unless expr starts with '…'
            - "../*[1][text()='…']"
        then: [t: "點點點"]                        	# 	(en: 'dot dot dot', google translation)
        else_test:                              	#  must have $ClearSpeak_Ellipses = 'AndSoOn'
            if: "count(following-sibling::*) = 0"
            then: [t: "等等"]                     	# 	(en: 'and so on', google translation)
            else: [t: "等等"]                     	# 	(en: 'and so on up to', google translation)

 - "⁡":                                         	#  0x2061
    - test:
        if: "$Verbosity!='Terse' and not(preceding-sibling::*[1][IsInDefinition(., 'GeometryShapes')]) and
             not(@data-changed='added' and ancestor-or-self::*[contains(@data-intent-property, ':structure:')])"
        then: [t: "的"]                          	# 	(en: 'of', google translation)
 - "⁢": [t: ""]                                 	#  0x2062
 - "⁣": [t: ""]                                 	#  0x2063
 - "⁤": [t: "和"]                                	#  0x2064	(en: 'and', google translation)
 - "′": [t: "prime"]                            	#  0x2032
 - "″": [t: "double prime"]                     	#  0x2033
 - "‴": [t: "triple prime"]                     	#  0x2034

 - "ℂℕℚℝℤ":                                     	#  here we rely on this running through the table again to speak "cap xxx"
    - t: "triple prime"                         	# 	(en: 'double-struck')
    - spell: "translate('.', 'ℂℕℚℝℤ', 'CNQRZ')"

 - "℃": [t: "攝氏攝氏度"]                            	#  0x2103	(en: 'degrees celsius', google translation)
 - "℉": [t: "華氏度"]                              	#  0x2109	(en: 'degrees fahrenheit', google translation)
 - "ℋℛℓ":                                       	#  0x210b
    - t: "腳本"                                   	# 	(en: 'script', google translation)
    - spell: "translate('.', 'ℋℛℓ', 'HRl')"
 - "ℎ": [t: "普朗克常數"]                            	#  0x210e	(en: 'planck constant', google translation)
 - "ℜ":                                         	#  0x211c
    - t: "fraktur"                              	# 	(google translation)
    - spell: "'R'"

 - "Ω": [t: "歐姆"]                               	#  0x2126	(en: 'ohms', google translation)
 - "K": [t: "開爾文"]                              	#  0x212a	(en: 'kelvin', google translation)
 - "Å": [t: "埃埃斯特羅姆"]                           	#  0x212b	(en: 'angstroms', google translation)
 - "ⅆⅇⅈⅉ":                                      	#  0x2146-9
    - t: "雙擊斜體"                                 	# 	(en: 'double-struck italic', google translation)
    - spell: "translate('.', 'ⅆⅇⅈⅉ', 'deij')"

 - "←": [t: "左箭頭"]                              	#  0x2190	(en: 'leftwards arrow', google translation)
 - "↑": [t: "向上箭頭"]                             	#  0x2191	(en: 'upwards arrow', google translation)
 - "→":                                         	#  0x2192
     - test:
        if: "ancestor::*[2][self::m:limit]"
        then: [t: "方法"]                         	# 	(en: 'approaches', google translation)
        else: [t: "右箭頭"]                        	# 	(en: 'right arrow')

 - "↓": [t: "向下箭頭"]                             	#  0x2193	(en: 'downwards arrow', google translation)
 - "⇒": [t: "向右雙箭頭"]                            	#  0x21d2	(en: 'rightwards double arrow', google translation)
 - "∀": [t: "對任意的"]                             	#  0x2200	(en: 'for all')
 - "∂":                                         	#  0x2202
     - test: 
         if: "$Verbosity='Terse'"
         then: [t: "部分的"]                       	# 	(en: 'partial', google translation)
         else: [t: "偏微分"]                       	# 	(en: 'partial derivative')
 - "∃": [t: "存在"]                               	#  0x2203	(en: 'there exists')
 - "∄": [t: "不存在"]                              	#  0x2204	(en: 'there does not exist')
 - "∅": [t: "空集合"]                              	#  0x2205	(en: 'empty set')
 - "∆":                                         	#  0x2206
     - test: 
         if: "$Verbosity!='Terse'"
         then: [t: "這"]                         	# 	(en: 'the', google translation)
     - t: "變化量"                                 	# 	(en: 'laplacian of')
 - "∇":                                         	#  0x2207
     - test: 
         if: "$Verbosity!='Terse'"
         then: [t: "這"]                         	# 	(en: 'the', google translation)
     - t: "梯度"                                  	# 	(en: 'gradient of')
 - "∈":                                         	#  0x2208
     - test:
        if: "$SpeechStyle != 'ClearSpeak'"
        then: [t: "一個元素"]                       	# 	(en: 'an element of', google translation)
        # Several options for speaking elements in ClearSpeak -- they split between being inside a set or not and then the option
        else_test:
            if: "../../self::m:set or ../../../self::m:set"	#  inside a set
            then_test:
              - if: $ClearSpeak_SetMemberSymbol = 'Auto' or $ClearSpeak_SetMemberSymbol = 'In'
                then: [t: "在"]                  	# 	(en: 'in', google translation)
              - else_if: $ClearSpeak_SetMemberSymbol = 'Member'
                then: [t: "成員"]                 	# 	(en: 'member of', google translation)
              - else_if: $ClearSpeak_SetMemberSymbol = 'Element'
                then: [t: "元素"]                 	# 	(en: 'element of', google translation)
              - else: [t: "屬於"]                 	#  $ClearSpeak_SetMemberSymbol = 'Belongs'	(en: 'belonging to')
            else_test:
              - if: $ClearSpeak_SetMemberSymbol = 'Auto' or $ClearSpeak_SetMemberSymbol = 'Member'
                then: [t: "是"]                  	# 	(en: 'is a member of', google translation)
              - else_if: $ClearSpeak_SetMemberSymbol = 'Element'
                then: [t: "是一個元素"]              	# 	(en: 'is an element of', google translation)
              - else_if: $ClearSpeak_SetMemberSymbol = 'In'
                then: [t: "在"]                  	# 	(en: 'is in', google translation)
              - else: [t: "屬於"]                 	#  $ClearSpeak_SetMemberSymbol = 'Belongs'	(en: 'belongs to')
 - "∉":                                         	#  0x2209
    # rule is identical to 0x2208
     - test:
        if: "$SpeechStyle != 'ClearSpeak'"
        then: [t: "不是一個元素"]                     	# 	(en: 'is not an element of', google translation)
        # Several options for speaking elements in ClearSpeak -- they split between being inside a set or not and then the option
        else_test:
            if: "../../self::m:set or ../../../self::m:set"	#  inside a set
            then_test:
              - if: $ClearSpeak_SetMemberSymbol = 'Auto' or $ClearSpeak_SetMemberSymbol = 'In'
                then: [t: "不在"]                 	# 	(en: 'not in', google translation)
              - else_if: $ClearSpeak_SetMemberSymbol = 'Member'
                then: [t: "不是成員"]               	# 	(en: 'not member of', google translation)
              - else_if: $ClearSpeak_SetMemberSymbol = 'Element'
                then: [t: "不是"]                 	# 	(en: 'not element of', google translation)
              - else: [t: "不屬於"]                	#  $ClearSpeak_SetMemberSymbol = 'Belongs'	(en: 'not belonging to')
            else_test:
              - if: $ClearSpeak_SetMemberSymbol = 'Auto' or $ClearSpeak_SetMemberSymbol = 'Member'
                then: [t: "不是成員"]               	# 	(en: 'is not a member of', google translation)
              - else_if: $ClearSpeak_SetMemberSymbol = 'Element'
                then: [t: "不是一個元素"]             	# 	(en: 'is not an element of', google translation)
              - else_if: $ClearSpeak_SetMemberSymbol = 'In'
                then: [t: "不在"]                 	# 	(en: 'is not in', google translation)
              - else: [t: "不屬於"]                	#  $ClearSpeak_SetMemberSymbol = 'Belongs'	(en: 'does not belong to')
 - "∊":                                         	#  0x220a
     - test:
        if: "$SpeechStyle != 'ClearSpeak'"
        then: [t: "是一個元素"]                      	# 	(en: 'is an element of', google translation)
        # Several options for speaking elements in ClearSpeak -- they split between being inside a set or not and then the option
        else_test:
            if: "../../self::m:set or ../../../self::m:set"	#  inside a set
            then_test:
              - if: $ClearSpeak_SetMemberSymbol = 'Auto' or $ClearSpeak_SetMemberSymbol = 'In'
                then: [t: "在"]                  	# 	(en: 'in', google translation)
              - else_if: $ClearSpeak_SetMemberSymbol = 'Member'
                then: [t: "成員"]                 	# 	(en: 'member of', google translation)
              - else_if: $ClearSpeak_SetMemberSymbol = 'Element'
                then: [t: "元素"]                 	# 	(en: 'element of', google translation)
              - else: [t: "屬於"]                 	#  $ClearSpeak_SetMemberSymbol = 'Belongs'	(en: 'belonging to')
            else_test:
              - if: $ClearSpeak_SetMemberSymbol = 'Auto' or $ClearSpeak_SetMemberSymbol = 'Member'
                then: [t: "是"]                  	# 	(en: 'is a member of', google translation)
              - else_if: $ClearSpeak_SetMemberSymbol = 'Element'
                then: [t: "是一個元素"]              	# 	(en: 'is an element of', google translation)
              - else_if: $ClearSpeak_SetMemberSymbol = 'In'
                then: [t: "在"]                  	# 	(en: 'is in', google translation)
              - else: [t: "屬於"]                 	#  $ClearSpeak_SetMemberSymbol = 'Belongs'	(en: 'belongs to')
 - "∏": [t: "N元乘積"]                             	#  0x220f	(en: 'product')
 - "∐": [t: "N元余積"]                             	#  0x2210	(en: 'co-product')
 - "∑": [t: "和"]                                	#  0x2211	(en: 'sum')
 - "−": [t: "減"]                                	#  0x2212	(en: 'minus')
 - "∓": [t: "正負號"]                              	#  0x2213	(en: 'minus or plus')
 - "∗": [t: "時代"]                               	#  0x2217	(en: 'times', google translation)
 - "∘": [t: "合成"]                               	#  0x2218	(en: 'composed with')
 - "√":                                         	#  0x221a
     - test: 
         if: "$Verbosity!='Terse'"
         then: [t: "這"]                         	# 	(en: 'the', google translation)
     - t: "開根號"                                 	# 	(en: 'square root of')
 - "∝":                                         	#  0x221d
     - test: 
         if: "$Verbosity!='Terse'"
         then: [t: "是"]                         	# 	(en: 'is', google translation)
     - t: "正比於"                                 	# 	(en: 'proportional to')
 - "∞": [t: "無限"]                               	#  0x221e	(en: 'infinity')
 - "∟": [t: "直角"]                               	#  0x221f	(en: 'right angle')
 - "∠": [t: "角"]                                	#  0x2220	(en: 'angle')
 - "∡": [t: "測量角"]                              	#  0x2221	(en: 'measured angle')
 - "∣": [t: "除"]                                	#  0x2223	(en: 'divides')
 - "∤": [t: "不除"]                               	#  0x2224	(en: 'does not divide')
 - "∥":                                         	#  0x2225
     - test: 
         if: "$Verbosity!='Terse'"
         then: [t: "是"]                         	# 	(en: 'is', google translation)
     - t: "平行"                                  	# 	(en: 'parallel to')
 - "∦":                                         	#  0x2226
     - test: 
         if: "$Verbosity!='Terse'"
         then: [t: "是"]                         	# 	(en: 'is', google translation)
     - t: "不平行"                                 	# 	(en: 'not parallel to')
 - "∧": [t: "邏輯與"]                              	#  0x2227	(en: 'and')
 - "∨": [t: "邏輯或"]                              	#  0x2228	(en: 'or')
 - "∩": [t: "交集"]                               	#  0x2229	(en: 'intersection')
 - "∪": [t: "聯集"]                               	#  0x222a	(en: 'union')
 - "∫": [t: "積分"]                               	#  0x222b	(en: 'integral')
 - "∬": [t: "雙重積分"]                             	#  0x222c	(en: 'double integral')
 - "∭": [t: "三重積分"]                             	#  0x222d	(en: 'triple integral')
 - "∮": [t: "圍道積分"]                             	#  0x222e	(en: 'contour integral')
 - "∶":                                         	#  0x2236
     - test: 
         if: "$Verbosity!='Terse'"
         then: [t: "是"]                         	# 	(en: 'is', google translation)
     - t: "比"                                   	# 	(en: 'to')
 - "∷": [t: "比例"]                               	#  0x2237	(en: 'as')
 - "∼": [t: "波浪符"]                              	#  0x223c	(en: 'varies with')
 - "∽": [t: "反波浪符"]                             	#  0x223d	(en: 'reversed tilde')
 - "∾":                                         	#  0x223e
     - test: 
         if: "$Verbosity!='Terse'"
         then: [t: "是"]                         	# 	(en: 'is', google translation)
     - t: "豎翻躺倒S"                               	# 	(en: 'most positive')
 - "∿": [t: "正弦波型"]                             	#  0x223f	(en: 'sine wave')
 - "≠":                                         	#  0x2260
     - test: 
         if: "$Verbosity!='Terse'"
         then: [t: "是"]                         	# 	(en: 'is', google translation)
     - t: "不等於"                                 	# 	(en: 'not equal to')
 - "≡":                                         	#  0x2261
     - test: 
         if: "$Verbosity!='Terse'"
         then: [t: "是"]                         	# 	(en: 'is', google translation)
     - t: "恆等於"                                 	# 	(en: 'identical to')
 - "≤":                                         	#  0x2264
     - test: 
         if: "$Verbosity!='Terse'"
         then: [t: "是"]                         	# 	(en: 'is', google translation)
     - t:  "less than or equal to"
 - "≥":                                         	#  0x2265
     - test: 
         if: "$Verbosity!='Terse'"
         then: [t: "是"]                         	# 	(en: 'is', google translation)
     - t: "大於或等於"                               	# 	(en: 'greater than or equal to')
 - "≦": [t: "小於等於"]                             	#  0x2266	(en: 'less than over equal to')
 - "≧": [t: "大於等於"]                             	#  0x2267	(en: 'greater than over equal to')
 - "≺": [t: "先於"]                               	#  0x227a	(en: 'precedes')
 - "≻": [t: "後於"]                               	#  0x227b	(en: 'succeeds')
 - "⊂":                                         	#  0x2282
     - test: 
         if: "$Verbosity!='Terse'"
         then: [t: "是一個"]                       	# 	(en: 'is a', google translation)
     - t: "包含於"                                 	# 	(en: 'subset of')
 - "⊃":                                         	#  0x2283
     - test: 
         if: "$Verbosity!='Terse'"
         then: [t: "是一個"]                       	# 	(en: 'is a', google translation)
     - t: "包含"                                  	# 	(en: 'superset of')
 - "⊄":                                         	#  0x2284
     - test: 
         if: "$Verbosity!='Terse'"
         then: [t: "是"]                         	# 	(en: 'is', google translation)
     - t: "不包含於"                                	# 	(en: 'not a subset of')
 - "⊅":                                         	#  0x2285
     - test: 
         if: "$Verbosity!='Terse'"
         then: [t: "是"]                         	# 	(en: 'is', google translation)
     - t: "不包含"                                 	# 	(en: 'not a superset of')
 - "⊆":                                         	#  0x2286
     - test: 
         if: "$Verbosity!='Terse'"
         then: [t: "是一個"]                       	# 	(en: 'is a', google translation)
     - t: "包含於或等於"                              	# 	(en: 'subset of or equal to')
 - "⊇":                                         	#  0x2287
     - test: 
         if: "$Verbosity!='Terse'"
         then: [t: "是一個"]                       	# 	(en: 'is a', google translation)
     - t: "包含或等於"                               	# 	(en: 'superset of or equal to')