======= mdevctl ======= ---------------------------------- Mediated device management utility ---------------------------------- :Manual section: 8 SYNOPSIS ======== ``mdevctl`` {COMMAND} [OPTIONS...] ``lsmdev`` [OPTIONS...] DESCRIPTION =========== ``mdevctl`` is a utility for managing and persisting devices in the mediated device device framework of the Linux kernel. Mediated devices are sub-devices of a parent device (ex. a vGPU) which can be dynamically created and potentially used by drivers like vfio-mdev for assignment to virtual machines. ``lsmdev`` is an alias for ``mdevctl list``. OPTIONS ======= The following options are understood: ``--addattr=ATTRIBUTE`` Add an attribute *ATTRIBUTE*. Valid for the ``modify`` command. ``-a|--auto`` Automatically start the device on parent availability. Valid for ``define`` and ``modify`` commands. ``-d|--defined`` List all defined devices, even if not active. Valid for the ``list`` command. Modify the defined configuration of a device, even if the device is active. Valid for the ``modify`` command. ``--delattr`` Delete an attribute entry. Valid for the ``modify`` command. ``--dumpjson`` Dump the configuration for a device in JSON format when filtered to as single device and used with the ``list`` command. When used with the ``types`` command, output machine readable type information. ``-i|--index=INDEX`` Act on the attribute *INDEX*. Valid for the ``modify`` command. ``--jsonfile=FILE`` Read the configuration for a device from a JSON file *FILE*. Valid for the ``define`` and ``start`` commands. ``-l|--live`` Modify active device without modifying the defined configuration of the device. Valid for the ``modify`` command. ``-m|--manual`` Do not start a device automatically on parent availability. Valid for the ``modify`` command. ``-p|--parent=PARENT`` Specify or identify the device by its parent device. Note that the parent device is specified by its kernel sysfs name and is case-sensitive. ``-t|--type=TYPE`` Specify or identify the device by its type. ``-u|--uuid=UUID`` Specify or identify the device by its UUID. ``--value=VALUE`` Set an attribute to *VALUE*, in the format accepted by the attribute. Valid for the ``modify`` command. ``-v|--verbose`` Increase output verbosity, currently only adds attribute output to the ``list`` command. ``-V|--version`` Print mdevctl version. COMMANDS ======== The following commands are understood: ``define`` *DEVICESPEC* Define a config for an mdev device, identified either by an UUID (if the device already exists), or by the parent device and either the type or a JSON configuration file, and, optionally, the UUID. If no UUID is specified, one is autogenerated and printed. If no file is used, *-a|--auto* may be used to specify that the device should be started automatically. ``list`` List mdev devices. With no options, currently running devices are listed. With ``-d|--defined``, previously defined devices are listed. Can be restricted to list only devices for a given parent or UUID. With ``--dumpjson`` output is provided in machine readable JSON format. When a UUID is provided and the output results in a single device, the JSON output format is compatible with the configuration file format. ``modify`` *DEVICESPEC* Modify the configuration for an mdev device, identified via its UUID and optionally its parent. Type and startup mode (auto or manual) can be modified by this command. Attributes can be added or deleted. Attributes to be deleted must be specified by their index; if an attribute is specified without an index, it is appended at the end of the attribute list. Active devices are unaffected by this command; changes in the configuration are applied the next time the device is started. Depending on installed callout scripts active devices can be modified. With ``-l|--live`` modifications can be applied to active devices if a callout scripts supports the event ``live``. The option ``-d|--defined`` also direct the modification to the started device configuration. ``start`` *DEVICESPEC* Start a mediated device. This command can be used to start either a previously-defined device or a newly-created transient device. If the UUID and optional parent argument matches an existing device definition, then the existing device will be started. It is an error to specify a device type that conflicts with the existing device definition. If the UUID argument is omitted or if the specified UUID and parent does not match an existing device definition, a new transient device will be started. If the UUID is omitted, a new UUID will be automatically generated. When starting a new transient device, the parent and device type must be specified. A ``--jsonfile`` may replace the ``--type`` specification and also include additional attributes in JSON format to be applied to the started device. ``stop`` *DEVICESPEC* Stop an mdev device, specified via its UUID. ``types`` List the mdev device types known to the system by parent device. Output may be limited to a single parent device with the ``-p|--parent`` option. JSON output format is used with the ``--dumpjson`` option. ``undefine`` *DEVICESPEC* Undefine, or remove the configuration for an mdev device, specified by its UUID and optionally its parent. If a UUID exists for multiple parents, all of them will be removed unless restricted to a single parent. Running devices are unaffected by this command. NOTE ON DEVICE SPECIFICATION ============================ For a given UUID, only one device with that UUID may be running at the same time. However, it is possible to define multiple devices with the same UUID under different parent devices. Therefore, it is sometimes necessary to specify the parent device alongside the UUID to uniquely identify a device. EXIT STATUS =========== On success, 0 is returned, a non-zero failure code otherwise. EXAMPLES ======== List running mdev devices:: # mdevctl list 85006552-1b4b-45ef-ad62-de05be9171df 0000:00:02.0 i915-GVTg_V4_4 83c32df7-d52e-4ec1-9668-1f3c7e4df107 0000:00:02.0 i915-GVTg_V4_8 (defined) List defined mdev devices:: # mdevctl list -d 83c32df7-d52e-4ec1-9668-1f3c7e4df107 0000:00:02.0 i915-GVTg_V4_8 auto b0a3989f-8138-4d49-b63a-59db28ec8b48 0000:00:02.0 i915-GVTg_V4_8 auto 5cf14a12-a437-4c82-a13f-70e945782d7b 0000:00:02.0 i915-GVTg_V4_4 manual List mdev types supported on the host system:: # mdevctl types 0000:00:02.0 i915-GVTg_V4_2 Available instances: 1 Device API: vfio-pci Description: low_gm_size: 256MB high_gm_size: 1024MB fence: 4 resolution: 1920x1200 weight: 8 i915-GVTg_V4_1 Available instances: 0 Device API: vfio-pci Description: low_gm_size: 512MB high_gm_size: 2048MB fence: 4 resolution: 1920x1200 weight: 16 i915-GVTg_V4_8 Available instances: 4 Device API: vfio-pci Description: low_gm_size: 64MB high_gm_size: 384MB fence: 4 resolution: 1024x768 weight: 2 i915-GVTg_V4_4 Available instances: 3 Device API: vfio-pci Description: low_gm_size: 128MB high_gm_size: 512MB fence: 4 resolution: 1920x1200 weight: 4 Modify a defined device from automatic start to manual:: # mdevctl modify --uuid 83c32df7-d52e-4ec1-9668-1f3c7e4df107 --manual # mdevctl list -d 83c32df7-d52e-4ec1-9668-1f3c7e4df107 0000:00:02.0 i915-GVTg_V4_8 manual b0a3989f-8138-4d49-b63a-59db28ec8b48 0000:00:02.0 i915-GVTg_V4_8 auto 5cf14a12-a437-4c82-a13f-70e945782d7b 0000:00:02.0 i915-GVTg_V4_4 manual Stop a running mdev device:: # mdevctl stop -u 83c32df7-d52e-4ec1-9668-1f3c7e4df107 Start an mdev device that is not defined:: # uuidgen 6eba5b41-176e-40db-b93e-7f18e04e0b93 # mdevctl start -u 6eba5b41-176e-40db-b93e-7f18e04e0b93 -p 0000:00:02.0 --type i915-GVTg_V4_1 # mdevctl list 85006552-1b4b-45ef-ad62-de05be9171df 0000:00:02.0 i915-GVTg_V4_4 6eba5b41-176e-40db-b93e-7f18e04e0b93 0000:00:02.0 i915-GVTg_V4_1 Promote the new created mdev to a defined device:: # mdevctl define --uuid 6eba5b41-176e-40db-b93e-7f18e04e0b93 # mdevctl list -d 83c32df7-d52e-4ec1-9668-1f3c7e4df107 0000:00:02.0 i915-GVTg_V4_8 manual 6eba5b41-176e-40db-b93e-7f18e04e0b93 0000:00:02.0 i915-GVTg_V4_1 manual b0a3989f-8138-4d49-b63a-59db28ec8b48 0000:00:02.0 i915-GVTg_V4_8 auto 5cf14a12-a437-4c82-a13f-70e945782d7b 0000:00:02.0 i915-GVTg_V4_4 manual ADVANCED EXAMPLES (ATTRIBUTES AND JSON) --------------------------------------- :: # mdevctl list -d 783e6dbb-ea0e-411f-94e2-717eaad438bf matrix vfio_ap-passthrough manual Add some attributes:: # mdevctl modify -u 783e6dbb-ea0e-411f-94e2-717eaad438bf --addattr=assign_adapter --value=5 # mdevctl modify -u 783e6dbb-ea0e-411f-94e2-717eaad438bf --addattr=assign_adapter --value=6 # mdevctl modify -u 783e6dbb-ea0e-411f-94e2-717eaad438bf --addattr=assign_domain --value=0xab # mdevctl modify -u 783e6dbb-ea0e-411f-94e2-717eaad438bf --addattr=assign_control_domain --value=0xab # mdevctl modify -u 783e6dbb-ea0e-411f-94e2-717eaad438bf --addattr=assign_domain --value=4 # mdevctl modify -u 783e6dbb-ea0e-411f-94e2-717eaad438bf --addattr=assign_control_domain --value=4 # mdevctl list -dv 783e6dbb-ea0e-411f-94e2-717eaad438bf matrix vfio_ap-passthrough manual Attrs: @{0}: {"assign_adapter":"5"} @{1}: {"assign_adapter":"6"} @{2}: {"assign_domain":"0xab"} @{3}: {"assign_control_domain":"0xab"} @{4}: {"assign_domain":"4"} @{5}: {"assign_control_domain":"4"} Dump the JSON configuration:: # mdevctl list -d -u 783e6dbb-ea0e-411f-94e2-717eaad438bf --dumpjson { "mdev_type": "vfio_ap-passthrough", "start": "manual", "attrs": [ { "assign_adapter": "5" }, { "assign_adapter": "6" }, { "assign_domain": "0xab" }, { "assign_control_domain": "0xab" }, { "assign_domain": "4" }, { "assign_control_domain": "4" } ] } Remove some attributes:: # mdevctl modify -u 783e6dbb-ea0e-411f-94e2-717eaad438bf --delattr --index=5 # mdevctl modify -u 783e6dbb-ea0e-411f-94e2-717eaad438bf --delattr --index=4 # mdevctl list -dv 783e6dbb-ea0e-411f-94e2-717eaad438bf matrix vfio_ap-passthrough manual Attrs: @{0}: {"assign_adapter":"5"} @{1}: {"assign_adapter":"6"} @{2}: {"assign_domain":"0xab"} @{3}: {"assign_control_domain":"0xab"} Define an mdev device from a file:: # cat vfio_ap_device.json { "mdev_type": "vfio_ap-passthrough", "start": "manual", "attrs": [ { "assign_adapter": "5" }, { "assign_domain": "0x47" }, { "assign_domain": "0xff" } ] } # mdevctl define -p matrix --jsonfile vfio_ap_device.json e2e73122-cc39-40ee-89eb-b0a47d334cae # mdevctl list -dv 783e6dbb-ea0e-411f-94e2-717eaad438bf matrix vfio_ap-passthrough manual Attrs: @{0}: {"assign_adapter":"5"} @{1}: {"assign_adapter":"6"} @{2}: {"assign_domain":"0xab"} @{3}: {"assign_control_domain":"0xab"} e2e73122-cc39-40ee-89eb-b0a47d334cae matrix vfio_ap-passthrough manual Attrs: @{0}: {"assign_adapter":"5"} @{1}: {"assign_domain":"0x47"} @{2}: {"assign_domain":"0xff"} CONFIGURATION FILE FORMAT ========================= Configuration files are in JSON. Attributes in "``attrs``" are optional. :: { "mdev_type": "TYPE", "start": "auto|manual", "attrs": [ { "attribute0": "VALUE" }, { "attribute1": "VALUE" } ] } INVOKING EXTERNAL SCRIPTS FOR DEVICE EVENTS =========================================== mdevctl supports invoking external scripts to handle additional device type-specific configurations and to broadcast notifications regarding changes or updates to a device. These scripts are invoked before, after, and/or during mdevctl's "primary command execution" (e.g. writing the device configuration file for define, or activating a device for start). Essentially, the procedure in mdevctl looks like this: - command-line parsing & setup - invoke live-command call-out [1]_ - invoke pre-command call-out - primary command execution [2]_ - invoke post-command call-out [2]_ - invoke notifier .. [1] executed only if live update is requested. .. [2] skipped if step ``invoke pre-command call-out`` fails. EVENT SCRIPTS ------------- A call-out or notification event invokes a script along with a set of parameters detailing the type of call-out, mdevctl's command execution progress, and the mediated device. The parameters are as follows: | SCRIPT <``-t=``\ *type* ``-e=``\ *event* ``-a=``\ *action* ``-s=``\ *state* ``-u=``\ *UUID* ``-p=``\ *parent*> ``CONFIG`` The device's JSON configuration, provided via standard input. ``-t=``\ *type* The device type. ``-e=``\ *event* Event type of call-out that is invoked. For call-out scripts, this may be ``pre``, ``live``, ``post``, or ``get``. For notification scripts, this will always be ``notify``. ``-a=``\ *action* An action synonymous with an mdevctl command (e.g. define, start). ``-s=``\ *state* A trinary state of the mdevctl command execution. The possibilities are ``none`` if the mdevctl command has yet to execute, ``success`` if the mdevctl command completed successfully, or ``failure`` if there was a problem executing the mdevctl command. ``-u=``\ *UUID* UUID of the mediated device. ``-p=``\ *parent* Parent of the mediated the device. CALL-OUT EVENT SCRIPTS ---------------------- A call-out event script is invoked during a ``live``, ``pre``, ``post`` or ``get`` event. mdevctl will attempt each script stored in the mdevctl callouts directory until either a script that satisfies the device type is found or all scripts have been attempted. A device script must check the "TYPE" parameter to ensure the specified device type is supported, otherwise error code 2 should be returned. If no script is found for the specified device type, then mdevctl will carry on as normal. These scripts are stored in */usr/lib/mdevctl/scripts.d/callouts*. The same script is invoked for ``live``, ``pre``, ``post``, and ``get`` call-out events for the device type. ``Live-Command`` A live-command call-out event is invoked once before the pre-command call-out event execution. This only occurs if the ``live`` option is specified on the ``modify`` command and the device modified is active. Event type is ``live``. State will always be ``none``. If the ``live`` command line option is specified any non-zero return code results in a live modification failure except for all call-outs return with return code 2 resulting in a ``live update not supported`` information. The return code is disruptive if also the option ``defined`` is provided and will prevent the update of the defined device configuration. A notification event will follow if the ``live`` command line option is specified. This event is only supported for the ``modify`` command. ``Pre-Command`` A pre-command call-out event is invoked once prior to primary command execution. Event type is ``pre``. State will always be ``none``. Any non-zero return code (exempting 2) will prevent mdevctl from performing the primary command execution and mdevctl will abort early. A notification event will follow only if an error code (exempting 2) is observed. This event is not supported for the ``list``, ``types``, or ``version`` commands. ``Post-Command`` A post-command call-out event is invoked once after primary command execution. Event type is ``post``. State will be ``success`` if mdevctl was able to finish primary command execution successfully, or ``failure`` otherwise. The same script used for the pre event is used for the post event. Any return code is non-disruptive. A notification event will always follow a post-command call-out. This event is not supported for the ``list``, ``types``, or ``version`` commands. ``Get-attributes`` A get event is invoked during a ``define`` and ``list`` command to acquire device attributes from an active device. Event type is ``get``. Action is ``attributes``. State is ``none``. Note that, unlike other call-outs events, **get-attributes does not expect a device config on stdin, and an array of JSON formatted device attributes is returned via stdout**. The same script used for the pre event is used for the get event. If the script is not designed to support a get event, then the return code is 0. For ``define``, a non-zero return code (exempting 2) will disrupt the define command entirely. For ``list``, any return code is non-disruptive. A script must return a JSON formatted array of device attributes on standard output. Example:: [ { "attribute0": "VALUE" }, { "attribute1": "VALUE" } ] ``Get-capabilities`` A get event is invoked on every new mdevctl execution to find a matching script supporting versioning for the device type. Event type is ``get``. Action is ``capabilities``. State is ``none``. Note that, unlike other call-outs events, **get-capabilities provides a versioning JSON on stdin, and expects a versioning JSON is returned via stdout**. The provided JSON on stdin explains in ``provides`` which ``actions`` and ``events`` mdevctl supports. The information is offered to the script to derive its supported ``actions`` and ``events`` from but it there is no obligation for scripts to follow this pattern. A valid versioning JSON response provides in ``supports`` the supported actions in ``actions`` and the supported events in ``events``. If a valid versioning JSON is returned on stdout by the script and the return code is NOT 2 the script is considered a positive match for the provided device type. A script providing versioning is the primary choice for a device type when mdevctl is executing callouts or in other words if a script which supports versioning is found the script is used for every event and action for the device type. Should no versioning supporting script be found the none versioning search pattern is used. A script is provided on standard in with a versioning JSON describing the mdevctl supported version, actions and events. Example:: { "provides": { "version": 1, "actions": [ "start", "stop", "define", "undefine", "modify", "attributes", "capabilities" ], "events": [ "pre", "post", "notify", "get" ] } } A script that wants to support versioning must return a versioning JSON on standard output. The script should list all supported actions in the actions array and all supported events in the events array. It is possible to add additional actions or events in the array but if mdevctl did not have these in the arrays in provides they are ignored. Example:: { "supports": { "version": 1, "actions": [ "start", "stop", "define", "undefine", "modify", "attributes", "capabilities" ], "events": [ "pre", "post", "notify", "get" ] } } AUTO-START CALL-OUTS -------------------- For each device set to start automatically during system boot, mdevctl will invoke the pre and post events. Action is the string ``start``. Return code and notification event behavior is the same as documented for the pre and post events. Errors reported by a script will disrupt the auto-start for that particular device and the message will be reported to the system log before attempting to the next auto-start device. Note that if a notification script is used to convey information to another program or daemon during the auto-start procedure, it is not guaranteed that the program will already be active prior to mdevctl's invocation (e.g. the auto-start event may occur before the libvirt daemon is activated). NOTIFICATION EVENT SCRIPTS -------------------------- Notification event scripts may be used to signal the state of the mediated device or the state of an mdevctl command to other programs or loggers. Unlike call-out scripts, notifier scripts are device-type agnostic. ``Notify`` A notification event is invoked once either following a pre-command call-out failure or after a post-command call-out. Event is ``notify``. If following a pre event, then state will be ``none``. If following a post event, then state will mirror the value passed to the post-command call-out. These scripts are stored in */usr/lib/mdevctl/scripts.d/notifiers*. **All notification scripts will be invoked during a notification event**. A non-zero return code is ignored. This event is not supported for the ``list``, ``types``, or ``version`` commands. SCRIPT RETURN VALUES -------------------- A call-out script should return one of the following values: - 0 if OK, - 1 if an error occurred, - 2 if the script does not support the device type FILES ===== */etc/mdevctl.d/** Configuration files are in one subdirectory per parent device and named by UUID. */usr/lib/mdevctl/scripts.d/callouts/** Scripts for pre/post/get call-out events. **NOTE**: these scripts were previously located at */etc/mdevctl.d/scripts.d/callouts/**, but that location is now deprecated. */usr/lib/mdevctl/scripts.d/notifiers/** Scripts for notification call-out events. **NOTE**: these scripts were previously located at */etc/mdevctl.d/scripts.d/notifiers/**, but that location is now deprecated. SEE ALSO ======== udev(7), udevadm(8), driverctl(8)