GIT-PULL(1)                                                                                       Git Manual                                                                                      GIT-PULL(1)

NAME
       git-pull - Fetch from and integrate with another repository or a local branch

SYNOPSIS
       git pull [<options>] [<repository> [<refspec>...]]

DESCRIPTION
       Incorporates changes from a remote repository into the current branch. In its default mode, git pull is shorthand for git fetch followed by git merge FETCH_HEAD.

       More precisely, git pull runs git fetch with the given parameters and calls git merge to merge the retrieved branch heads into the current branch. With --rebase, it runs git rebase instead of git
       merge.

       <repository> should be the name of a remote repository as passed to git-fetch(1). <refspec> can name an arbitrary remote ref (for example, the name of a tag) or even a collection of refs with
       corresponding remote-tracking branches (e.g., refs/heads/*:refs/remotes/origin/*), but usually it is the name of a branch in the remote repository.

       Default values for <repository> and <branch> are read from the "remote" and "merge" configuration for the current branch as set by git-branch(1) --track.

       Assume the following history exists and the current branch is "master":

                     A---B---C master on origin
                    /
               D---E---F---G master
                   ^
                   origin/master in your repository

       Then "git pull" will fetch and replay the changes from the remote master branch since it diverged from the local master (i.e., E) until its current commit (C) on top of master and record the result
       in a new commit along with the names of the two parent commits and a log message from the user describing the changes.

                     A---B---C origin/master
                    /         \
               D---E---F---G---H master

       See git-merge(1) for details, including how conflicts are presented and handled.

       In Git 1.7.0 or later, to cancel a conflicting merge, use git reset --merge. Warning: In older versions of Git, running git pull with uncommitted changes is discouraged: while possible, it leaves
       you in a state that may be hard to back out of in the case of a conflict.

       If any of the remote changes overlap with local uncommitted changes, the merge will be automatically canceled and the work tree untouched. It is generally best to get any local changes in working
       order before pulling or stash them away with git-stash(1).

OPTIONS
       -q, --quiet
           This is passed to both underlying git-fetch to squelch reporting of during transfer, and underlying git-merge to squelch output during merging.

       -v, --verbose
           Pass --verbose to git-fetch and git-merge.

       --[no-]recurse-submodules[=yes|on-demand|no]
           This option controls if new commits of all populated submodules should be fetched and updated, too (see git-config(1) and gitmodules(5)).

           If the checkout is done via rebase, local submodule commits are rebased as well.

           If the update is done via merge, the submodule conflicts are resolved and checked out.

   Options related to merging
       --commit, --no-commit
           Perform the merge and commit the result. This option can be used to override --no-commit.

           With --no-commit perform the merge but pretend the merge failed and do not autocommit, to give the user a chance to inspect and further tweak the merge result before committing.

       --edit, -e, --no-edit
           Invoke an editor before committing successful mechanical merge to further edit the auto-generated merge message, so that the user can explain and justify the merge. The --no-edit option can be
           used to accept the auto-generated message (this is generally discouraged).

           Older scripts may depend on the historical behaviour of not allowing the user to edit the merge log message. They will see an editor opened when they run git merge. To make it easier to adjust
           such scripts to the updated behaviour, the environment variable GIT_MERGE_AUTOEDIT can be set to no at the beginning of them.

       --ff
           When the merge resolves as a fast-forward, only update the branch pointer, without creating a merge commit. This is the default behavior.

       --no-ff
           Create a merge commit even when the merge resolves as a fast-forward. This is the default behaviour when merging an annotated (and possibly signed) tag that is not stored in its natural place in
           refs/tags/ hierarchy.

       --ff-only
           Refuse to merge and exit with a non-zero status unless the current HEAD is already up to date or the merge can be resolved as a fast-forward.

       -S[<keyid>], --gpg-sign[=<keyid>]
           GPG-sign the resulting merge commit. The keyid argument is optional and defaults to the committer identity; if specified, it must be stuck to the option without a space.

       --log[=<n>], --no-log
           In addition to branch names, populate the log message with one-line descriptions from at most <n> actual commits that are being merged. See also git-fmt-merge-msg(1).

           With --no-log do not list one-line descriptions from the actual commits being merged.

       --signoff, --no-signoff
           Add Signed-off-by line by the committer at the end of the commit log message. The meaning of a signoff depends on the project, but it typically certifies that committer has the rights to submit
           this work under the same license and agrees to a Developer Certificate of Origin (see http://developercertificate.org/ for more information).

           With --no-signoff do not add a Signed-off-by line.

       --stat, -n, --no-stat
           Show a diffstat at the end of the merge. The diffstat is also controlled by the configuration option merge.stat.

           With -n or --no-stat do not show a diffstat at the end of the merge.

       --squash, --no-squash
           Produce the working tree and index state as if a real merge happened (except for the merge information), but do not actually make a commit, move the HEAD, or record $GIT_DIR/MERGE_HEAD (to cause
           the next git commit command to create a merge commit). This allows you to create a single commit on top of the current branch whose effect is the same as merging another branch (or more in case
           of an octopus).

           With --no-squash perform the merge and commit the result. This option can be used to override --squash.

       -s <strategy>, --strategy=<strategy>
           Use the given merge strategy; can be supplied more than once to specify them in the order they should be tried. If there is no -s option, a built-in list of strategies is used instead (git
           merge-recursive when merging a single head, git merge-octopus otherwise).

       -X <option>, --strategy-option=<option>
           Pass merge strategy specific option through to the merge strategy.

       --verify-signatures, --no-verify-signatures
           Verify that the tip commit of the side branch being merged is signed with a valid key, i.e. a key that has a valid uid: in the default trust model, this means the signing key has been signed by
           a trusted key. If the tip commit of the side branch is not signed with a valid key, the merge is aborted.

       --summary, --no-summary
           Synonyms to --stat and --no-stat; these are deprecated and will be removed in the future.

       --allow-unrelated-histories
           By default, git merge command refuses to merge histories that do not share a common ancestor. This option can be used to override this safety when merging histories of two projects that started
           their lives independently. As that is a very rare occasion, no configuration variable to enable this by default exists and will not be added.

       -r, --rebase[=false|true|merges|preserve|interactive]
           When true, rebase the current branch on top of the upstream branch after fetching. If there is a remote-tracking branch corresponding to the upstream branch and the upstream branch was rebased
           since last fetched, the rebase uses that information to avoid rebasing non-local changes.

           When set to merges, rebase using git rebase --rebase-merges so that the local merge commits are included in the rebase (see git-rebase(1) for details).

           When set to preserve, rebase with the --preserve-merges option passed to git rebase so that locally created merge commits will not be flattened.

           When false, merge the current branch into the upstream branch.

           When interactive, enable the interactive mode of rebase.

           See pull.rebase, branch.<name>.rebase and branch.autoSetupRebase in git-config(1) if you want to make git pull always use --rebase instead of merging.

               Note
               This is a potentially dangerous mode of operation. It rewrites history, which does not bode well when you published that history already. Do not use this option unless you have read git-
               rebase(1) carefully.

       --no-rebase
           Override earlier --rebase.

       --autostash, --no-autostash
           Before starting rebase, stash local modifications away (see git-stash(1)) if needed, and apply the stash entry when done.  --no-autostash is useful to override the rebase.autoStash configuration
           variable (see git-config(1)).

           This option is only valid when "--rebase" is used.

   Options related to fetching
       --all
           Fetch all remotes.

       -a, --append
           Append ref names and object names of fetched refs to the existing contents of .git/FETCH_HEAD. Without this option old data in .git/FETCH_HEAD will be overwritten.

       --depth=<depth>
           Limit fetching to the specified number of commits from the tip of each remote branch history. If fetching to a shallow repository created by git clone with --depth=<depth> option (see git-
           clone(1)), deepen or shorten the history to the specified number of commits. Tags for the deepened commits are not fetched.

       --deepen=<depth>
           Similar to --depth, except it specifies the number of commits from the current shallow boundary instead of from the tip of each remote branch history.

       --shallow-since=<date>
           Deepen or shorten the history of a shallow repository to include all reachable commits after <date>.

       --shallow-exclude=<revision>
           Deepen or shorten the history of a shallow repository to exclude commits reachable from a specified remote branch or tag. This option can be specified multiple times.

       --unshallow
           If the source repository is complete, convert a shallow repository to a complete one, removing all the limitations imposed by shallow repositories.

           If the source repository is shallow, fetch as much as possible so that the current repository has the same history as the source repository.

       --update-shallow
           By default when fetching from a shallow repository, git fetch refuses refs that require updating .git/shallow. This option updates .git/shallow and accept such refs.

       --negotiation-tip=<commit|glob>
           By default, Git will report, to the server, commits reachable from all local refs to find common commits in an attempt to reduce the size of the to-be-received packfile. If specified, Git will
           only report commits reachable from the given tips. This is useful to speed up fetches when the user knows which local ref is likely to have commits in common with the upstream ref being fetched.

           This option may be specified more than once; if so, Git will report commits reachable from any of the given commits.

           The argument to this option may be a glob on ref names, a ref, or the (possibly abbreviated) SHA-1 of a commit. Specifying a glob is equivalent to specifying this option multiple times, one for
           each matching ref name.

           See also the fetch.negotiationAlgorithm configuration variable documented in git-config(1).

       -f, --force
           When git fetch is used with <src>:<dst> refspec it may refuse to update the local branch as discussed in the <refspec> part of the git-fetch(1) documentation. This option overrides that check.

       -k, --keep
           Keep downloaded pack.

       --no-tags
           By default, tags that point at objects that are downloaded from the remote repository are fetched and stored locally. This option disables this automatic tag following. The default behavior for
           a remote may be specified with the remote.<name>.tagOpt setting. See git-config(1).

       -u, --update-head-ok
           By default git fetch refuses to update the head which corresponds to the current branch. This flag disables the check. This is purely for the internal use for git pull to communicate with git
           fetch, and unless you are implementing your own Porcelain you are not supposed to use it.

       --upload-pack <upload-pack>
           When given, and the repository to fetch from is handled by git fetch-pack, --exec=<upload-pack> is passed to the command to specify non-default path for the command run on the other end.

       --progress
           Progress status is reported on the standard error stream by default when it is attached to a terminal, unless -q is specified. This flag forces progress status even if the standard error stream
           is not directed to a terminal.

       -o <option>, --server-option=<option>
           Transmit the given string to the server when communicating using protocol version 2. The given string must not contain a NUL or LF character. When multiple --server-option=<option> are given,
           they are all sent to the other side in the order listed on the command line.

       -4, --ipv4
           Use IPv4 addresses only, ignoring IPv6 addresses.

       -6, --ipv6
           Use IPv6 addresses only, ignoring IPv4 addresses.

       <repository>
           The "remote" repository that is the source of a fetch or pull operation. This parameter can be either a URL (see the section GIT URLS below) or the name of a remote (see the section REMOTES
           below).

       <refspec>
           Specifies which refs to fetch and which local refs to update. When no <refspec>s appear on the command line, the refs to fetch are read from remote.<repository>.fetch variables instead (see git-
           fetch(1)).

           The format of a <refspec> parameter is an optional plus +, followed by the source <src>, followed by a colon :, followed by the destination ref <dst>. The colon can be omitted when <dst> is
           empty. <src> is typically a ref, but it can also be a fully spelled hex object name.

           tag <tag> means the same as refs/tags/<tag>:refs/tags/<tag>; it requests fetching everything up to the given tag.

           The remote ref that matches <src> is fetched, and if <dst> is not an empty string, an attempt is made to update the local ref that matches it.

           Whether that update is allowed without --force depends on the ref namespace it’s being fetched to, the type of object being fetched, and whether the update is considered to be a fast-forward.
           Generally, the same rules apply for fetching as when pushing, see the <refspec>...  section of git-push(1) for what those are. Exceptions to those rules particular to git fetch are noted below.

           Until Git version 2.20, and unlike when pushing with git-push(1), any updates to refs/tags/* would be accepted without + in the refspec (or --force). When fetching, we promiscuously considered
           all tag updates from a remote to be forced fetches. Since Git version 2.20, fetching to update refs/tags/* works the same way as when pushing. I.e. any updates will be rejected without + in the
           refspec (or --force).

           Unlike when pushing with git-push(1), any updates outside of refs/{tags,heads}/* will be accepted without + in the refspec (or --force), whether that’s swapping e.g. a tree object for a blob, or
           a commit for another commit that’s doesn’t have the previous commit as an ancestor etc.

           Unlike when pushing with git-push(1), there is no configuration which’ll amend these rules, and nothing like a pre-fetch hook analogous to the pre-receive hook.

           As with pushing with git-push(1), all of the rules described above about what’s not allowed as an update can be overridden by adding an the optional leading + to a refspec (or using --force
           command line option). The only exception to this is that no amount of forcing will make the refs/heads/* namespace accept a non-commit object.

               Note
               When the remote branch you want to fetch is known to be rewound and rebased regularly, it is expected that its new tip will not be descendant of its previous tip (as stored in your
               remote-tracking branch the last time you fetched). You would want to use the + sign to indicate non-fast-forward updates will be needed for such branches. There is no way to determine or
               declare that a branch will be made available in a repository with this behavior; the pulling user simply must know this is the expected usage pattern for a branch.

               Note
               There is a difference between listing multiple <refspec> directly on git pull command line and having multiple remote.<repository>.fetch entries in your configuration for a <repository> and
               running a git pull command without any explicit <refspec> parameters. <refspec>s listed explicitly on the command line are always merged into the current branch after fetching. In other
               words, if you list more than one remote ref, git pull will create an Octopus merge. On the other hand, if you do not list any explicit <refspec> parameter on the command line, git pull will
               fetch all the <refspec>s it finds in the remote.<repository>.fetch configuration and merge only the first <refspec> found into the current branch. This is because making an Octopus from
               remote refs is rarely done, while keeping track of multiple remote heads in one-go by fetching more than one is often useful.

GIT URLS
       In general, URLs contain information about the transport protocol, the address of the remote server, and the path to the repository. Depending on the transport protocol, some of this information may
       be absent.

       Git supports ssh, git, http, and https protocols (in addition, ftp, and ftps can be used for fetching, but this is inefficient and deprecated; do not use it).

       The native transport (i.e. git:// URL) does no authentication and should be used with caution on unsecured networks.

       The following syntaxes may be used with them:

       •   ssh://[user@]host.xz[:port]/path/to/repo.git/

       •   git://host.xz[:port]/path/to/repo.git/

       •   http[s]://host.xz[:port]/path/to/repo.git/

       •   ftp[s]://host.xz[:port]/path/to/repo.git/

       An alternative scp-like syntax may also be used with the ssh protocol:

       •   [user@]host.xz:path/to/repo.git/

       This syntax is only recognized if there are no slashes before the first colon. This helps differentiate a local path that contains a colon. For example the local path foo:bar could be specified as
       an absolute path or ./foo:bar to avoid being misinterpreted as an ssh url.

       The ssh and git protocols additionally support ~username expansion:

       •   ssh://[user@]host.xz[:port]/~[user]/path/to/repo.git/

       •   git://host.xz[:port]/~[user]/path/to/repo.git/

       •   [user@]host.xz:/~[user]/path/to/repo.git/

       For local repositories, also supported by Git natively, the following syntaxes may be used:

       •   /path/to/repo.git/

       •   file:///path/to/repo.git/

       These two syntaxes are mostly equivalent, except when cloning, when the former implies --local option. See git-clone(1) for details.

       When Git doesn’t know how to handle a certain transport protocol, it attempts to use the remote-<transport> remote helper, if one exists. To explicitly request a remote helper, the following syntax
       may be used:

       •   <transport>::<address>

       where <address> may be a path, a server and path, or an arbitrary URL-like string recognized by the specific remote helper being invoked. See gitremote-helpers(1) for details.

       If there are a large number of similarly-named remote repositories and you want to use a different format for them (such that the URLs you use will be rewritten into URLs that work), you can create
       a configuration section of the form:

                   [url "<actual url base>"]
                           insteadOf = <other url base>

       For example, with this:

                   [url "git://git.host.xz/"]
                           insteadOf = host.xz:/path/to/
                           insteadOf = work:

       a URL like "work:repo.git" or like "host.xz:/path/to/repo.git" will be rewritten in any context that takes a URL to be "git://git.host.xz/repo.git".

       If you want to rewrite URLs for push only, you can create a configuration section of the form:

                   [url "<actual url base>"]
                           pushInsteadOf = <other url base>

       For example, with this:

                   [url "ssh://example.org/"]
                           pushInsteadOf = git://example.org/

       a URL like "git://example.org/path/to/repo.git" will be rewritten to "ssh://example.org/path/to/repo.git" for pushes, but pulls will still use the original URL.

REMOTES
       The name of one of the following can be used instead of a URL as <repository> argument:

       •   a remote in the Git configuration file: $GIT_DIR/config,

       •   a file in the $GIT_DIR/remotes directory, or

       •   a file in the $GIT_DIR/branches directory.

       All of these also allow you to omit the refspec from the command line because they each contain a refspec which git will use by default.

   Named remote in configuration file
       You can choose to provide the name of a remote which you had previously configured using git-remote(1), git-config(1) or even by a manual edit to the $GIT_DIR/config file. The URL of this remote
       will be used to access the repository. The refspec of this remote will be used by default when you do not provide a refspec on the command line. The entry in the config file would appear like this:

                   [remote "<name>"]
                           url = <url>
                           pushurl = <pushurl>
                           push = <refspec>
                           fetch = <refspec>

       The <pushurl> is used for pushes only. It is optional and defaults to <url>.

   Named file in $GIT_DIR/remotes
       You can choose to provide the name of a file in $GIT_DIR/remotes. The URL in this file will be used to access the repository. The refspec in this file will be used as default when you do not provide
       a refspec on the command line. This file should have the following format:

                   URL: one of the above URL format
                   Push: <refspec>
                   Pull: <refspec>

       Push: lines are used by git push and Pull: lines are used by git pull and git fetch. Multiple Push: and Pull: lines may be specified for additional branch mappings.

   Named file in $GIT_DIR/branches
       You can choose to provide the name of a file in $GIT_DIR/branches. The URL in this file will be used to access the repository. This file should have the following format:

                   <url>#<head>

       <url> is required; #<head> is optional.

       Depending on the operation, git will use one of the following refspecs, if you don’t provide one on the command line. <branch> is the name of this file in $GIT_DIR/branches and <head> defaults to
       master.

       git fetch uses:

                   refs/heads/<head>:refs/heads/<branch>

       git push uses:

                   HEAD:refs/heads/<head>

MERGE STRATEGIES
       The merge mechanism (git merge and git pull commands) allows the backend merge strategies to be chosen with -s option. Some strategies can also take their own options, which can be passed by giving
       -X<option> arguments to git merge and/or git pull.

       resolve
           This can only resolve two heads (i.e. the current branch and another branch you pulled from) using a 3-way merge algorithm. It tries to carefully detect criss-cross merge ambiguities and is
           considered generally safe and fast.

       recursive
           This can only resolve two heads using a 3-way merge algorithm. When there is more than one common ancestor that can be used for 3-way merge, it creates a merged tree of the common ancestors and
           uses that as the reference tree for the 3-way merge. This has been reported to result in fewer merge conflicts without causing mismerges by tests done on actual merge commits taken from Linux
           2.6 kernel development history. Additionally this can detect and handle merges involving renames, but currently cannot make use of detected copies. This is the default merge strategy when
           pulling or merging one branch.

           The recursive strategy can take the following options:

           ours
               This option forces conflicting hunks to be auto-resolved cleanly by favoring our version. Changes from the other tree that do not conflict with our side are reflected to the merge result.
               For a binary file, the entire contents are taken from our side.

               This should not be confused with the ours merge strategy, which does not even look at what the other tree contains at all. It discards everything the other tree did, declaring our history
               contains all that happened in it.

           theirs
               This is the opposite of ours; note that, unlike ours, there is no theirs merge strategy to confuse this merge option with.

           patience
               With this option, merge-recursive spends a little extra time to avoid mismerges that sometimes occur due to unimportant matching lines (e.g., braces from distinct functions). Use this when
               the branches to be merged have diverged wildly. See also git-diff(1) --patience.

           diff-algorithm=[patience|minimal|histogram|myers]
               Tells merge-recursive to use a different diff algorithm, which can help avoid mismerges that occur due to unimportant matching lines (such as braces from distinct functions). See also git-
               diff(1) --diff-algorithm.

           ignore-space-change, ignore-all-space, ignore-space-at-eol, ignore-cr-at-eol
               Treats lines with the indicated type of whitespace change as unchanged for the sake of a three-way merge. Whitespace changes mixed with other changes to a line are not ignored. See also git-
               diff(1) -b, -w, --ignore-space-at-eol, and --ignore-cr-at-eol.

               •   If their version only introduces whitespace changes to a line, our version is used;

               •   If our version introduces whitespace changes but their version includes a substantial change, their version is used;

               •   Otherwise, the merge proceeds in the usual way.

           renormalize
               This runs a virtual check-out and check-in of all three stages of a file when resolving a three-way merge. This option is meant to be used when merging branches with different clean filters
               or end-of-line normalization rules. See "Merging branches with differing checkin/checkout attributes" in gitattributes(5) for details.

           no-renormalize
               Disables the renormalize option. This overrides the merge.renormalize configuration variable.

           no-renames
               Turn off rename detection. This overrides the merge.renames configuration variable. See also git-diff(1) --no-renames.

           find-renames[=<n>]
               Turn on rename detection, optionally setting the similarity threshold. This is the default. This overrides the merge.renames configuration variable. See also git-diff(1) --find-renames.

           rename-threshold=<n>
               Deprecated synonym for find-renames=<n>.

           subtree[=<path>]
               This option is a more advanced form of subtree strategy, where the strategy makes a guess on how two trees must be shifted to match with each other when merging. Instead, the specified path
               is prefixed (or stripped from the beginning) to make the shape of two trees to match.

       octopus
           This resolves cases with more than two heads, but refuses to do a complex merge that needs manual resolution. It is primarily meant to be used for bundling topic branch heads together. This is
           the default merge strategy when pulling or merging more than one branch.

       ours
           This resolves any number of heads, but the resulting tree of the merge is always that of the current branch head, effectively ignoring all changes from all other branches. It is meant to be used
           to supersede old development history of side branches. Note that this is different from the -Xours option to the recursive merge strategy.

       subtree
           This is a modified recursive strategy. When merging trees A and B, if B corresponds to a subtree of A, B is first adjusted to match the tree structure of A, instead of reading the trees at the
           same level. This adjustment is also done to the common ancestor tree.

       With the strategies that use 3-way merge (including the default, recursive), if a change is made on both branches, but later reverted on one of the branches, that change will be present in the
       merged result; some people find this behavior confusing. It occurs because only the heads and the merge base are considered when performing a merge, not the individual commits. The merge algorithm
       therefore considers the reverted change as no change at all, and substitutes the changed version instead.

DEFAULT BEHAVIOUR
       Often people use git pull without giving any parameter. Traditionally, this has been equivalent to saying git pull origin. However, when configuration branch.<name>.remote is present while on branch
       <name>, that value is used instead of origin.

       In order to determine what URL to use to fetch from, the value of the configuration remote.<origin>.url is consulted and if there is not any such variable, the value on the URL: line in
       $GIT_DIR/remotes/<origin> is used.

       In order to determine what remote branches to fetch (and optionally store in the remote-tracking branches) when the command is run without any refspec parameters on the command line, values of the
       configuration variable remote.<origin>.fetch are consulted, and if there aren’t any, $GIT_DIR/remotes/<origin> is consulted and its Pull: lines are used. In addition to the refspec formats described
       in the OPTIONS section, you can have a globbing refspec that looks like this:

           refs/heads/*:refs/remotes/origin/*

       A globbing refspec must have a non-empty RHS (i.e. must store what were fetched in remote-tracking branches), and its LHS and RHS must end with /*. The above specifies that all remote branches are
       tracked using remote-tracking branches in refs/remotes/origin/ hierarchy under the same name.

       The rule to determine which remote branch to merge after fetching is a bit involved, in order not to break backward compatibility.

       If explicit refspecs were given on the command line of git pull, they are all merged.

       When no refspec was given on the command line, then git pull uses the refspec from the configuration or $GIT_DIR/remotes/<origin>. In such cases, the following rules apply:

        1. If branch.<name>.merge configuration for the current branch <name> exists, that is the name of the branch at the remote site that is merged.

        2. If the refspec is a globbing one, nothing is merged.

        3. Otherwise the remote branch of the first refspec is merged.

EXAMPLES
       •   Update the remote-tracking branches for the repository you cloned from, then merge one of them into your current branch:

               $ git pull
               $ git pull origin

           Normally the branch merged in is the HEAD of the remote repository, but the choice is determined by the branch.<name>.remote and branch.<name>.merge options; see git-config(1) for details.

       •   Merge into the current branch the remote branch next:

               $ git pull origin next

           This leaves a copy of next temporarily in FETCH_HEAD, but does not update any remote-tracking branches. Using remote-tracking branches, the same can be done by invoking fetch and merge:

               $ git fetch origin
               $ git merge origin/next

       If you tried a pull which resulted in complex conflicts and would want to start over, you can recover with git reset.

SECURITY
       The fetch and push protocols are not designed to prevent one side from stealing data from the other repository that was not intended to be shared. If you have private data that you need to protect
       from a malicious peer, your best option is to store it in another repository. This applies to both clients and servers. In particular, namespaces on a server are not effective for read access
       control; you should only grant read access to a namespace to clients that you would trust with read access to the entire repository.

       The known attack vectors are as follows:

        1. The victim sends "have" lines advertising the IDs of objects it has that are not explicitly intended to be shared but can be used to optimize the transfer if the peer also has them. The attacker
           chooses an object ID X to steal and sends a ref to X, but isn’t required to send the content of X because the victim already has it. Now the victim believes that the attacker has X, and it sends
           the content of X back to the attacker later. (This attack is most straightforward for a client to perform on a server, by creating a ref to X in the namespace the client has access to and then
           fetching it. The most likely way for a server to perform it on a client is to "merge" X into a public branch and hope that the user does additional work on this branch and pushes it back to the
           server without noticing the merge.)

        2. As in #1, the attacker chooses an object ID X to steal. The victim sends an object Y that the attacker already has, and the attacker falsely claims to have X and not Y, so the victim sends Y as
           a delta against X. The delta reveals regions of X that are similar to Y to the attacker.

BUGS
       Using --recurse-submodules can only fetch new commits in already checked out submodules right now. When e.g. upstream added a new submodule in the just fetched commits of the superproject the
       submodule itself can not be fetched, making it impossible to check out that submodule later without having to do a fetch again. This is expected to be fixed in a future Git version.

SEE ALSO
       git-fetch(1), git-merge(1), git-config(1)

GIT
       Part of the git(1) suite

Git 2.20.1                                                                                        04/20/2020                                                                                      GIT-PULL(1)