# Contracts
*Read this in other languages: [简体中文](translations/contracts_ZH-CN.md)*
This document describes smart contracts that can be setup using Mwc even
though the Mwc chain does not support scripting. All these contracts rely
on a few basic features that are built in the chain and compose them in
increasingly clever ways.
None of those constructs are fully original or invented by the authors of this
document or the Mwc development team. Most of the credit should be attributed
to a long list of cryptographers and researchers. To name just a few: Torben
Pryds Pedersen, Gregory Maxwell, Andrew Poelstra, John Tromp, Claus Peter
Schnorr. We apologize in advance for all those we couldn't name and recognize
that most computer science discoveries are incremental.
## Built-Ins
This section is meant as a reminder of some crucial features of the Mwc chain.
We assume some prior reading as to how these are constructed and used.
### Pedersen Commitments
All outputs include a Pedersen commitment of the form `r*G + v*H` with `r`
the blinding factor, `v` the value, and G and H two distinct generator points
on the same curve group.
### Aggregate Signatures (a.k.a. Schnorr, MuSig)
We suppose we have the SHA256 hash function and the same G curve as above. In
its simplest form, an aggregate signature is built from:
* the message `M` to sign, in our case the transaction fee
* a private key `x`, with its matching public key `x*G`
* a nonce `k` just used for the purpose of building the signature
We build the challenge `e = SHA256(M | k*G | x*G)`, and the scalar
`s = k + e * x`. The full aggregate signature is then the pair `(s, k*G)`.
The signature can be checked using the public key `x*G`, re-calculating `e`
using M and `k*G` from the 2nd part of the signature pair and by verifying
that `s`, the first part of the signature pair, satisfies:
```
s*G = k*G + e * x*G
```
In this simple case of someone sending a transaction to a receiver they trust
(see later for the trustless case), an aggregate signature can be directly
built for a Mwc transaction by taking the above private key `x` to be the sum
of output blinding factors minus the sum of input blinding factors. The resulting
kernel is assembled from the aggregate signature generated using `r` and the
public key `r*G`, and allows to verify non-inflation for all Mwc transactions
(and signs the fees).
Because these signatures are built simply from a scalar and a public key, they
can be used to construct a variety of contracts using "simple" arithmetic.
### (Absolute) Timelocked Transactions
Analogous to Bitcoin [nLockTime](https://en.bitcoin.it/wiki/Timelock#nLockTime).
A transaction can be time-locked with a few simple modifications:
* the message `M` to sign becomes the lock_height `h` at which the transaction
becomes spendable appended to the fee
* `M = fee | h`
* the lock height `h` is included in the transaction kernel
* a block with a kernel that includes a lock height greater than the current
block height is rejected
### (Relative) Timelocked Transactions
We can extend the concept of an absolute locktime on a tx by including a (kernel) commitment that we can define the lock_height relative to.
The lock_height would be relative to the block height where the referenced kernel was first included in the chain state.
Tx2 can then be restricted such that it would only be valid to include it in a block once `h` blocks have passed after first seeing Tx1 (via the referenced kernel commitment).
* the message `M` to sign would need to include the following -
* the `fee` as before
* the lock_height `h` (as before but interpreted as a relative value)
* a referenced kernel commitment `C`
* M = `fee | h | C`
For Tx2 to be accepted it would also need to include a Merkle proof identifying the block including `C` from Tx1. This proves the relative lock_height requirement has been met.
## Derived Contracts
### Trustless Transactions
An aggregate (Schnorr) signature involving a single party is relatively simple
but does not demonstrate the full flexibility of the construction. We show
here how to generalize it for use in outputs involving multiple parties.
As constructed in section 1.2, an aggregate signature requires trusting the
receiving party. As Mwc outputs are completely obscured by Pedersen
Commitments, one cannot prove money was actually sent to the right party,
hence a receiver could claim not having received anything. To solve this
issue, we require the receiver to collaborate with the sender in building a
transaction and specifically its kernel signature.
Alice wants to pay Bob in mwcs. She starts the transaction building process:
1. Alice selects her inputs and builds her change output. The sum of all
blinding factors (change output minus inputs) is `rs`.
1. Alice picks a random nonce ks and sends her partial transaction, `ks*G` and
`rs*G` to Bob.
1. Bob picks his own random nonce `kr` and the blinding factor for his output
`rr`. Using `rr`, Bob adds his output to the transaction.
1. Bob computes the message `M = fee | lock_height`, the Schnorr challenge
`e = SHA256(M | kr*G + ks*G | rr*G + rs*G)` and finally his side of the
signature `sr = kr + e * rr`.
1. Bob sends `sr`, `kr*G` and `rr*G` to Alice.
1. Alice computes `e` just like Bob did and can check that
`sr*G = kr*G + e*rr*G`.
1. Alice sends her side of the signature `ss = ks + e * rs` to Bob.
1. Bob validates `ss*G` just like Alice did for `sr*G` in step 6 and can
produce the final signature `s = (ss + sr, ks*G + kr*G)` as well as the final
transaction kernel including `s` and the public key `rr*G + rs*G`.
This protocol requires 3 data exchanges (Alice to Bob, Bob back to Alice,
and finally Alice to Bob) and is therefore said to be interactive. However
the interaction can be done over any medium and in any period of time,
including the pony express over 2 weeks.
This protocol can also be generalized to any number `i` of parties. On the
first round, all the `ki*G` and `ri*G` are shared. On the 2nd round, everyone
can compute `e = SHA256(M | sum(ki*G) | sum(ri*G))` and their own signature
`si`. Finally, a finalizing party can then gather all the partial signatures
`si`, validate them and produce `s = (sum(si), sum(ki*G))`.
### Multiparty Outputs (multisig)
We describe here a way to build a transaction with an output that can only be
spent when multiple parties approve it. This construction is very similar to
the previous setup for trustless transactions, however in this case both the
signature and a Pedersen Commitment need to be aggregated.
This time, Alice wants to send funds such that both Bob and her need to agree
to spend. Alice builds the transaction normally and adds the multiparty output
such that:
1. Bob picks a blinding factor `rb` and sends `rb*G` to Alice.
1. Alice picks a blinding factor `ra` and builds the commitment
`C = ra*G + rb*G + v*H`. She sends the commitment to Bob.
1. Bob creates a range proof for `v` using `C` and `rb` and sends it to Alice.
1. Alice generates her own range proof, aggregates it with Bob, finalizing
the multiparty output `Oab`.
1. The kernel is built following the same procedure as for Trustless
Transactions.
We observe that for that new output `Oab`, neither party know the whole
blinding factor. To be able to build a transaction spending Oab, someone would
need to know `ra + rb` to produce a kernel signature. To produce that spending
kernel, Alice and Bob need to collaborate. This, again, is done using a
protocol very close to Trustless Transactions.
### Multiparty Timelocks
This contract is a building block for multiple other contracts. Here, Alice
agrees to lock some funds to start a financial interaction with Bob and prove
to Bob she has funds. The setup is the following:
* Alice builds a a 2-of-2 multiparty transaction with an output she shares with
Bob, however she does not participate in building the kernel signature yet.
* Bob builds a refund transaction with Alice that sends the funds back to Alice
using a timelock (for example 1440 blocks ahead, about 24h).
* Alice and Bob finish the 2-of-2 transaction by building the corresponding
kernel and broadcast it.
Now Alice and Bob are free to build additional transactions distributing the
funds locked in the 2-of-2 output in any way they see fit. If Bob refuses to
cooperate, Alice just needs to broadcast her refund transaction after the time
lock expires.
This contract can be trivially used for unidirectional payment channels.
### Conditional Output Timelocks
Analogous to Bitcoin [CheckLockTimeVerify](https://en.bitcoin.it/wiki/Timelock#CheckLockTimeVerify).
We currently have _unconditional_ lock_heights on txs (tx is not valid and will not be accepted until lock_height has passed).
Private keys can be summed together.
Key3 = Key1 + Key2
Commitments can be summed together.
C3 = C1 + C2
Given _unconditional locktimes on txs_ we can leverage these to give us _conditional locktimes on outputs_ by "entangling" two outputs on two related txs together.
We can construct two txs (Tx1, Tx2) with two entangled outputs Out1 and Out2 such that -
* Out1 (commitment C1) is from Tx1 and built using Key1
* Out2 (commitment C2) is from Tx2 and built using Key2
* Tx2 has an _unconditional_ lock_height on it
If we do this (and we can manage the keys as necessary) -
* Out1 + Out2 can _only_ be spent as a pair using Key3
* They can _only_ be spent after lock_height from Tx2
Tx1 (containing Out1) can be broadcast, accepted and confirmed on-chain immediately.
Tx2 cannot be broadcast and accepted until lock_height has passed.
So if Alice only knows K3 and does not know Key1 or Key2, then Out1 can only be spent by Alice after lock_height has passed.
If Bob on the other hand knows Key2 then Out1 can be spent by Bob immediately.
We have a _conditional_ timelock on Out1 (confirmed, on-chain)
where it can be spent either with Key3 (after lock_height), _or_ Key2 immediately.
### (Relative) Conditional Output Timelocks
Analogous to Bitcoin [CheckSequenceVerify](https://en.bitcoin.it/wiki/Timelock#CheckSequenceVerify).
By combining "Conditional Timelock on Output" with "(Relative) Timelocked Transactions" we can encumber a confirmed output with a relative timelock (relative to a related tx kernel).
Tx1 (containing Out1) can be broadcast, accepted and confirmed on-chain immediately.
Tx2 cannot be broadcast and accepted until the _relative_ lock_height has passed, relative to the referenced kernel from the earlier Tx1.
### Atomic Swap
This setup can work on Bitcoin, Ethereum and likely other chains. It relies
on a time locked contract combined with a check for 2 public keys. On Bitcoin
this would be a 2-of-2 multisig, one public key being Alice's, the second
being the hash of a preimage that Bob has to reveal. In this setup, we consider
public key derivation `x*G` to be the hash function and by Bob revealing `x`,
Alice can then produce an adequate signature proving she knows `x` (in
addition to her own private key).
Alice has mwcs and Bob has bitcoin. They would like to swap. We assume Bob
created an output on the Bitcoin blockchain that allows spending either by
Alice if she learns a hash pre-image `x`, or by Bob after time `Tb`. Alice is
ready to send her mwcs to Bob if he reveals `x`.
First, Alice sends her mwcs to a multiparty timelock contract with a refund
time `Ta < Tb`. To send the 2-of-2 output to Bob and execute the swap, Alice
and Bob start as if they were building a normal trustless transaction as
specified in section 2.1.
1. Alice picks a random nonce `ks` and her blinding sum `rs` and sends `ks*G`
and `rs*G` to Bob.
1. Bob picks a random blinding factor `rr` and a random nonce `kr`. However
this time, instead of simply sending `sr = kr + e * rr` with his `rr*G` and
`kr*G`, Bob sends `sr' = kr + x + e * rr` as well as `x*G`.
1. Alice can validate that `sr'*G = kr*G + x*G + rr*G`. She can also check
that Bob has money locked with `x*G` on the other chain.
1. Alice sends back her `ss = ks + e * xs` as she normally would, now that she
can also compute `e = SHA256(M | ks*G + kr*G)`.
1. To complete the signature, Bob computes `sr = kr + e * rr` and the final
signature is `(sr + ss, kr*G + ks*G)`.
1. As soon as Bob broadcasts the final transaction to get his new mwcs, Alice
can compute `sr' - sr` to get `x`.
#### Notes on the Bitcoin setup
Prior to completing the atomic swap, Bob needs to know Alice's public key. Bob
would then create an output on the Bitcoin blockchain with a 2-of-2 multisig
similar to `alice_pubkey secret_pubkey 2 OP_CHECKMULTISIG`. This should be
wrapped in an `OP_IF` so Bob can get his money back after an agreed-upon time
and all of this can even be wrapped in a P2SH. Here `secret_pubkey` is `x*G`
from the previous section.
To verify the output, Alice would take `x*G`, recreate the bitcoin script, hash
it and check that her hash matches what's in the P2SH (step 2 in previous
section). Once she gets `x` (step 6), she can build the 2 signatures necessary
to spend the 2-of-2, having both private keys, and get her bitcoin.
### Hashed Timelocks (Lightning Network)
TODO relative lock times