/* * PSA hashing layer on top of Mbed TLS software crypto */ /* * Copyright The Mbed TLS Contributors * SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later */ #ifndef PSA_CRYPTO_HASH_H #define PSA_CRYPTO_HASH_H #include #include /** Get Mbed TLS MD information of a hash algorithm given its PSA identifier * * \param[in] alg PSA hash algorithm identifier * * \return The Mbed TLS MD information of the hash algorithm. \c NULL if the * PSA hash algorithm is not supported. */ const mbedtls_md_info_t *mbedtls_md_info_from_psa(psa_algorithm_t alg); /** Calculate the hash (digest) of a message using Mbed TLS routines. * * \note The signature of this function is that of a PSA driver hash_compute * entry point. This function behaves as a hash_compute entry point as * defined in the PSA driver interface specification for transparent * drivers. * * \param alg The hash algorithm to compute (\c PSA_ALG_XXX value * such that #PSA_ALG_IS_HASH(\p alg) is true). * \param[in] input Buffer containing the message to hash. * \param input_length Size of the \p input buffer in bytes. * \param[out] hash Buffer where the hash is to be written. * \param hash_size Size of the \p hash buffer in bytes. * \param[out] hash_length On success, the number of bytes * that make up the hash value. This is always * #PSA_HASH_LENGTH(\p alg). * * \retval #PSA_SUCCESS * Success. * \retval #PSA_ERROR_NOT_SUPPORTED * \p alg is not supported * \retval #PSA_ERROR_BUFFER_TOO_SMALL * \p hash_size is too small * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription */ psa_status_t mbedtls_psa_hash_compute( psa_algorithm_t alg, const uint8_t *input, size_t input_length, uint8_t *hash, size_t hash_size, size_t *hash_length); /** Set up a multipart hash operation using Mbed TLS routines. * * \note The signature of this function is that of a PSA driver hash_setup * entry point. This function behaves as a hash_setup entry point as * defined in the PSA driver interface specification for transparent * drivers. * * If an error occurs at any step after a call to mbedtls_psa_hash_setup(), the * operation will need to be reset by a call to mbedtls_psa_hash_abort(). The * core may call mbedtls_psa_hash_abort() at any time after the operation * has been initialized. * * After a successful call to mbedtls_psa_hash_setup(), the core must * eventually terminate the operation. The following events terminate an * operation: * - A successful call to mbedtls_psa_hash_finish() or mbedtls_psa_hash_verify(). * - A call to mbedtls_psa_hash_abort(). * * \param[in,out] operation The operation object to set up. It must have * been initialized to all-zero and not yet be in use. * \param alg The hash algorithm to compute (\c PSA_ALG_XXX value * such that #PSA_ALG_IS_HASH(\p alg) is true). * * \retval #PSA_SUCCESS * Success. * \retval #PSA_ERROR_NOT_SUPPORTED * \p alg is not supported * \retval #PSA_ERROR_BAD_STATE * The operation state is not valid (it must be inactive). * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription */ psa_status_t mbedtls_psa_hash_setup( mbedtls_psa_hash_operation_t *operation, psa_algorithm_t alg); /** Clone an Mbed TLS hash operation. * * \note The signature of this function is that of a PSA driver hash_clone * entry point. This function behaves as a hash_clone entry point as * defined in the PSA driver interface specification for transparent * drivers. * * This function copies the state of an ongoing hash operation to * a new operation object. In other words, this function is equivalent * to calling mbedtls_psa_hash_setup() on \p target_operation with the same * algorithm that \p source_operation was set up for, then * mbedtls_psa_hash_update() on \p target_operation with the same input that * that was passed to \p source_operation. After this function returns, the * two objects are independent, i.e. subsequent calls involving one of * the objects do not affect the other object. * * \param[in] source_operation The active hash operation to clone. * \param[in,out] target_operation The operation object to set up. * It must be initialized but not active. * * \retval #PSA_SUCCESS \emptydescription * \retval #PSA_ERROR_BAD_STATE * The \p source_operation state is not valid (it must be active). * \retval #PSA_ERROR_BAD_STATE * The \p target_operation state is not valid (it must be inactive). * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription */ psa_status_t mbedtls_psa_hash_clone( const mbedtls_psa_hash_operation_t *source_operation, mbedtls_psa_hash_operation_t *target_operation); /** Add a message fragment to a multipart Mbed TLS hash operation. * * \note The signature of this function is that of a PSA driver hash_update * entry point. This function behaves as a hash_update entry point as * defined in the PSA driver interface specification for transparent * drivers. * * The application must call mbedtls_psa_hash_setup() before calling this function. * * If this function returns an error status, the operation enters an error * state and must be aborted by calling mbedtls_psa_hash_abort(). * * \param[in,out] operation Active hash operation. * \param[in] input Buffer containing the message fragment to hash. * \param input_length Size of the \p input buffer in bytes. * * \retval #PSA_SUCCESS * Success. * \retval #PSA_ERROR_BAD_STATE * The operation state is not valid (it must be active). * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription */ psa_status_t mbedtls_psa_hash_update( mbedtls_psa_hash_operation_t *operation, const uint8_t *input, size_t input_length); /** Finish the calculation of the Mbed TLS-calculated hash of a message. * * \note The signature of this function is that of a PSA driver hash_finish * entry point. This function behaves as a hash_finish entry point as * defined in the PSA driver interface specification for transparent * drivers. * * The application must call mbedtls_psa_hash_setup() before calling this function. * This function calculates the hash of the message formed by concatenating * the inputs passed to preceding calls to mbedtls_psa_hash_update(). * * When this function returns successfully, the operation becomes inactive. * If this function returns an error status, the operation enters an error * state and must be aborted by calling mbedtls_psa_hash_abort(). * * \param[in,out] operation Active hash operation. * \param[out] hash Buffer where the hash is to be written. * \param hash_size Size of the \p hash buffer in bytes. * \param[out] hash_length On success, the number of bytes * that make up the hash value. This is always * #PSA_HASH_LENGTH(\c alg) where \c alg is the * hash algorithm that is calculated. * * \retval #PSA_SUCCESS * Success. * \retval #PSA_ERROR_BAD_STATE * The operation state is not valid (it must be active). * \retval #PSA_ERROR_BUFFER_TOO_SMALL * The size of the \p hash buffer is too small. You can determine a * sufficient buffer size by calling #PSA_HASH_LENGTH(\c alg) * where \c alg is the hash algorithm that is calculated. * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription */ psa_status_t mbedtls_psa_hash_finish( mbedtls_psa_hash_operation_t *operation, uint8_t *hash, size_t hash_size, size_t *hash_length); /** Abort an Mbed TLS hash operation. * * \note The signature of this function is that of a PSA driver hash_abort * entry point. This function behaves as a hash_abort entry point as * defined in the PSA driver interface specification for transparent * drivers. * * Aborting an operation frees all associated resources except for the * \p operation structure itself. Once aborted, the operation object * can be reused for another operation by calling * mbedtls_psa_hash_setup() again. * * You may call this function any time after the operation object has * been initialized by one of the methods described in #psa_hash_operation_t. * * In particular, calling mbedtls_psa_hash_abort() after the operation has been * terminated by a call to mbedtls_psa_hash_abort(), mbedtls_psa_hash_finish() or * mbedtls_psa_hash_verify() is safe and has no effect. * * \param[in,out] operation Initialized hash operation. * * \retval #PSA_SUCCESS \emptydescription * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription */ psa_status_t mbedtls_psa_hash_abort( mbedtls_psa_hash_operation_t *operation); #endif /* PSA_CRYPTO_HASH_H */