= nng_tls(7) // // Copyright 2019 Staysail Systems, Inc. // Copyright 2018 Capitar IT Group BV // // This document is supplied under the terms of the MIT License, a // copy of which should be located in the distribution where this // file was obtained (LICENSE.txt). A copy of the license may also be // found online at https://opensource.org/licenses/MIT. // == NAME nng_tls - TLS transport == SYNOPSIS [source,c] ---- #include int nng_tls_register(void); ---- == DESCRIPTION (((TLS)))(((Transport Layer Security)))(((transport, _tls_))) The ((_tls_ transport)) provides communication support between peers across a TCP/IP network using https://tools.ietf.org/html/rfc5246[TLS v1.2] on top of https://tools.ietf.org/html/rfc793[TCP]. Both IPv4 and IPv6 are supported when the underlying platform also supports it. The protocol details are documented in http://nanomsg.org/rfcs/sp-tls-v1.html[TLS Mapping for Scalability Protocols]. === Registration Depending upon how the library was built, it may be necessary to register the transport by calling xref:nng_tls_register.3.adoc[`nng_tls_register()`]. === Availability The _tls_ transport depends on the use of an external library. As of this writing, https://tls.mbed.org/[mbedTLS] version 2.0 or later is required. TIP: Applications may need to add this library (or libraries) to their link line, particularly when using a statically built library. NOTE: The mbedTLS library uses different licensing terms than _NNG_ itself; as of this writing it is offered under either https://opensource.org/licenses/Apache-2.0[Apache License 2.0] or https://opensource.org/licenses/gpl-license[GNU GPL] terms. You are responsible for understanding and adhering to the license terms of any libraries you use. === URI Format (((URI, `tls+tcp://`))) This transport uses URIs using the scheme `tls+tcp://`, followed by an IP address or hostname, followed by a colon and finally a TCP port number. For example, to contact port 4433 on the localhost either of the following URIs could be used: `tls+tcp://127.0.0.1:4433` or `tls+tcp://localhost:4433`. A URI may be restricted to IPv6 using the scheme `tls+tcp6://`, and may be restricted to IPv4 using the scheme `tls+tcp4://`. NOTE: Specifying `tls+tcp6://` may not prevent IPv4 hosts from being used with IPv4-in-IPv6 addresses, particularly when using a wildcard hostname with listeners. The details of this varies across operating systems. NOTE: Both `tls+tcp6://` and `tls+tcp4://` are specific to _NNG_, and may not be understood by other implementations. TIP: We recommend using either numeric IP addresses, or names that are specific to either IPv4 or IPv6 to prevent confusion and surprises. When specifying IPv6 addresses, the address must be enclosed in square brackets (`[]`) to avoid confusion with the final colon separating the port. For example, the same port 4433 on the IPv6 loopback address ('::1') would be specified as `tls+tcp://[::1]:4433`. TIP: Certificate validation generally works when using names rather than IP addresses. This transport automatically uses the name supplied in the URL when validating the certificate supplied by the server. The special value of 0 (`INADDR_ANY`) can be used for a listener to indicate that it should listen on all interfaces on the host. A short-hand for this form is to either omit the address, or specify the asterisk (`*`) character. For example, the following three URIs are all equivalent, and could be used to listen to port 9999 on the host: 1. `tls+tcp://0.0.0.0:9999` 2. `tls+tcp://*:9999` 3. `tls+tcp://:9999` The entire URI must be less than `NNG_MAXADDRLEN` bytes long. === Socket Address When using an xref:nng_sockaddr.5.adoc[`nng_sockaddr`] structure, the actual structure is either of type xref:nng_sockaddr_in.5.adoc[`nng_sockaddr_in`] (for IPv4) or xref:nng_sockaddr_in6.5.adoc[`nng_sockaddr_in6`] (for IPv6). === Transport Options The following transport options are available. Note that setting these must be done before the transport is started. * xref:nng_options.5.adoc#NNG_OPT_LOCADDR[`NNG_OPT_LOCADDR`] * xref:nng_options.5.adoc#NNG_OPT_REMADDR[`NNG_OPT_REMADDR`] * xref:nng_tcp_options.5.adoc#NNG_OPT_TCP_KEEPALIVE[`NNG_OPT_TCP_KEEPALIVE`] * xref:nng_tcp_options.5.adoc#NNG_OPT_TCP_NODELAY[`NNG_OPT_TCP_NODELAY`] * xref:nng_tls_options.5.adoc#NNG_OPT_TLS_AUTH_MODE[`NNG_OPT_TLS_AUTH_MODE`] * xref:nng_tls_options.5.adoc#NNG_OPT_TLS_CA_FILE[`NNG_OPT_TLS_CA_FILE`] * xref:nng_tls_options.5.adoc#NNG_OPT_TLS_CERT_KEY_FILE[`NNG_OPT_TLS_CERT_KEY_FILE`] * xref:nng_tls_options.5.adoc#NNG_OPT_TLS_CONFIG[`NNG_OPT_TLS_CONFIG`] * xref:nng_tls_options.5.adoc#NNG_OPT_TLS_VERIFIED[`NNG_OPT_TLS_VERIFIED_`] * xref:nng_options.5.adoc#NNG_OPT_URL[`NNG_OPT_URL`] == SEE ALSO [.text-left] xref:nng_tls_config_alloc.3tls.adoc[nng_tls_config_alloc(3tls)] xref:nng_options.5.adoc[nng_options(5)], xref:nng_sockaddr_in.5.adoc[nng_sockaddr_in(5)], xref:nng_sockaddr_in6.5.adoc[nng_sockaddr_in6(5)], xref:nng_tcp_options.5.adoc[nng_tcp_options(5)], xref:nng_tls_config.5.adoc[nng_tls_config(5)], xref:nng_tls_options.5.adoc[nng_tls_options(5)], xref:nng.7.adoc[nng(7)],