/** * Copyright (c) 2012 - 2017, Nordic Semiconductor ASA * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic * Semiconductor ASA integrated circuit in a product or a software update for * such product, must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /** @file * * @defgroup ble_sdk_srv_common Common service definitions * @{ * @ingroup ble_sdk_srv * @brief Constants, type definitions, and functions that are common to all services. */ #ifndef BLE_SRV_COMMON_H__ #define BLE_SRV_COMMON_H__ #include #include #include "ble_types.h" #include "app_util.h" #include "ble.h" #include "ble_gap.h" #include "ble_gatt.h" #ifdef __cplusplus extern "C" { #endif /** @defgroup UUID_SERVICES Service UUID definitions * @{ */ #define BLE_UUID_ALERT_NOTIFICATION_SERVICE 0x1811 /**< Alert Notification service UUID. */ #define BLE_UUID_BATTERY_SERVICE 0x180F /**< Battery service UUID. */ #define BLE_UUID_BLOOD_PRESSURE_SERVICE 0x1810 /**< Blood Pressure service UUID. */ #define BLE_UUID_CURRENT_TIME_SERVICE 0x1805 /**< Current Time service UUID. */ #define BLE_UUID_CYCLING_SPEED_AND_CADENCE 0x1816 /**< Cycling Speed and Cadence service UUID. */ #define BLE_UUID_LOCATION_AND_NAVIGATION_SERVICE 0x1819 /**< Location and Navigation service UUID. */ #define BLE_UUID_DEVICE_INFORMATION_SERVICE 0x180A /**< Device Information service UUID. */ #define BLE_UUID_GLUCOSE_SERVICE 0x1808 /**< Glucose service UUID. */ #define BLE_UUID_HEALTH_THERMOMETER_SERVICE 0x1809 /**< Health Thermometer service UUID. */ #define BLE_UUID_HEART_RATE_SERVICE 0x180D /**< Heart Rate service UUID. */ #define BLE_UUID_HUMAN_INTERFACE_DEVICE_SERVICE 0x1812 /**< Human Interface Device service UUID. */ #define BLE_UUID_IMMEDIATE_ALERT_SERVICE 0x1802 /**< Immediate Alert service UUID. */ #define BLE_UUID_LINK_LOSS_SERVICE 0x1803 /**< Link Loss service UUID. */ #define BLE_UUID_NEXT_DST_CHANGE_SERVICE 0x1807 /**< Next Dst Change service UUID. */ #define BLE_UUID_PHONE_ALERT_STATUS_SERVICE 0x180E /**< Phone Alert Status service UUID. */ #define BLE_UUID_REFERENCE_TIME_UPDATE_SERVICE 0x1806 /**< Reference Time Update service UUID. */ #define BLE_UUID_RUNNING_SPEED_AND_CADENCE 0x1814 /**< Running Speed and Cadence service UUID. */ #define BLE_UUID_SCAN_PARAMETERS_SERVICE 0x1813 /**< Scan Parameters service UUID. */ #define BLE_UUID_TX_POWER_SERVICE 0x1804 /**< TX Power service UUID. */ #define BLE_UUID_IPSP_SERVICE 0x1820 /**< Internet Protocol Support service UUID. */ #define BLE_UUID_BMS_SERVICE 0x181E /**< BOND MANAGEMENT service UUID*/ #define BLE_UUID_CGM_SERVICE 0x181F /**< Continuous Glucose Monitoring service UUID*/ #define BLE_UUID_PLX_SERVICE 0x1822 /**< Pulse Oximeter Service UUID*/ /** @} */ /** @defgroup UUID_CHARACTERISTICS Characteristic UUID definitions * @{ */ #define BLE_UUID_REMOVABLE_CHAR 0x2A3A /**< Removable characteristic UUID. */ #define BLE_UUID_SERVICE_REQUIRED_CHAR 0x2A3B /**< Service Required characteristic UUID. */ #define BLE_UUID_ALERT_CATEGORY_ID_CHAR 0x2A43 /**< Alert Category Id characteristic UUID. */ #define BLE_UUID_ALERT_CATEGORY_ID_BIT_MASK_CHAR 0x2A42 /**< Alert Category Id Bit Mask characteristic UUID. */ #define BLE_UUID_ALERT_LEVEL_CHAR 0x2A06 /**< Alert Level characteristic UUID. */ #define BLE_UUID_ALERT_NOTIFICATION_CONTROL_POINT_CHAR 0x2A44 /**< Alert Notification Control Point characteristic UUID. */ #define BLE_UUID_ALERT_STATUS_CHAR 0x2A3F /**< Alert Status characteristic UUID. */ #define BLE_UUID_BATTERY_LEVEL_CHAR 0x2A19 /**< Battery Level characteristic UUID. */ #define BLE_UUID_BLOOD_PRESSURE_FEATURE_CHAR 0x2A49 /**< Blood Pressure Feature characteristic UUID. */ #define BLE_UUID_BLOOD_PRESSURE_MEASUREMENT_CHAR 0x2A35 /**< Blood Pressure Measurement characteristic UUID. */ #define BLE_UUID_BODY_SENSOR_LOCATION_CHAR 0x2A38 /**< Body Sensor Location characteristic UUID. */ #define BLE_UUID_BOOT_KEYBOARD_INPUT_REPORT_CHAR 0x2A22 /**< Boot Keyboard Input Report characteristic UUID. */ #define BLE_UUID_BOOT_KEYBOARD_OUTPUT_REPORT_CHAR 0x2A32 /**< Boot Keyboard Output Report characteristic UUID. */ #define BLE_UUID_BOOT_MOUSE_INPUT_REPORT_CHAR 0x2A33 /**< Boot Mouse Input Report characteristic UUID. */ #define BLE_UUID_CURRENT_TIME_CHAR 0x2A2B /**< Current Time characteristic UUID. */ #define BLE_UUID_DATE_TIME_CHAR 0x2A08 /**< Date Time characteristic UUID. */ #define BLE_UUID_DAY_DATE_TIME_CHAR 0x2A0A /**< Day Date Time characteristic UUID. */ #define BLE_UUID_DAY_OF_WEEK_CHAR 0x2A09 /**< Day Of Week characteristic UUID. */ #define BLE_UUID_DST_OFFSET_CHAR 0x2A0D /**< Dst Offset characteristic UUID. */ #define BLE_UUID_EXACT_TIME_256_CHAR 0x2A0C /**< Exact Time 256 characteristic UUID. */ #define BLE_UUID_FIRMWARE_REVISION_STRING_CHAR 0x2A26 /**< Firmware Revision String characteristic UUID. */ #define BLE_UUID_GLUCOSE_FEATURE_CHAR 0x2A51 /**< Glucose Feature characteristic UUID. */ #define BLE_UUID_GLUCOSE_MEASUREMENT_CHAR 0x2A18 /**< Glucose Measurement characteristic UUID. */ #define BLE_UUID_GLUCOSE_MEASUREMENT_CONTEXT_CHAR 0x2A34 /**< Glucose Measurement Context characteristic UUID. */ #define BLE_UUID_HARDWARE_REVISION_STRING_CHAR 0x2A27 /**< Hardware Revision String characteristic UUID. */ #define BLE_UUID_HEART_RATE_CONTROL_POINT_CHAR 0x2A39 /**< Heart Rate Control Point characteristic UUID. */ #define BLE_UUID_HEART_RATE_MEASUREMENT_CHAR 0x2A37 /**< Heart Rate Measurement characteristic UUID. */ #define BLE_UUID_HID_CONTROL_POINT_CHAR 0x2A4C /**< Hid Control Point characteristic UUID. */ #define BLE_UUID_HID_INFORMATION_CHAR 0x2A4A /**< Hid Information characteristic UUID. */ #define BLE_UUID_IEEE_REGULATORY_CERTIFICATION_DATA_LIST_CHAR 0x2A2A /**< IEEE Regulatory Certification Data List characteristic UUID. */ #define BLE_UUID_INTERMEDIATE_CUFF_PRESSURE_CHAR 0x2A36 /**< Intermediate Cuff Pressure characteristic UUID. */ #define BLE_UUID_INTERMEDIATE_TEMPERATURE_CHAR 0x2A1E /**< Intermediate Temperature characteristic UUID. */ #define BLE_UUID_LOCAL_TIME_INFORMATION_CHAR 0x2A0F /**< Local Time Information characteristic UUID. */ #define BLE_UUID_MANUFACTURER_NAME_STRING_CHAR 0x2A29 /**< Manufacturer Name String characteristic UUID. */ #define BLE_UUID_MEASUREMENT_INTERVAL_CHAR 0x2A21 /**< Measurement Interval characteristic UUID. */ #define BLE_UUID_MODEL_NUMBER_STRING_CHAR 0x2A24 /**< Model Number String characteristic UUID. */ #define BLE_UUID_UNREAD_ALERT_CHAR 0x2A45 /**< Unread Alert characteristic UUID. */ #define BLE_UUID_NEW_ALERT_CHAR 0x2A46 /**< New Alert characteristic UUID. */ #define BLE_UUID_PNP_ID_CHAR 0x2A50 /**< PNP Id characteristic UUID. */ #define BLE_UUID_PROTOCOL_MODE_CHAR 0x2A4E /**< Protocol Mode characteristic UUID. */ #define BLE_UUID_RECORD_ACCESS_CONTROL_POINT_CHAR 0x2A52 /**< Record Access Control Point characteristic UUID. */ #define BLE_UUID_REFERENCE_TIME_INFORMATION_CHAR 0x2A14 /**< Reference Time Information characteristic UUID. */ #define BLE_UUID_REPORT_CHAR 0x2A4D /**< Report characteristic UUID. */ #define BLE_UUID_REPORT_MAP_CHAR 0x2A4B /**< Report Map characteristic UUID. */ #define BLE_UUID_RINGER_CONTROL_POINT_CHAR 0x2A40 /**< Ringer Control Point characteristic UUID. */ #define BLE_UUID_RINGER_SETTING_CHAR 0x2A41 /**< Ringer Setting characteristic UUID. */ #define BLE_UUID_SCAN_INTERVAL_WINDOW_CHAR 0x2A4F /**< Scan Interval Window characteristic UUID. */ #define BLE_UUID_SCAN_REFRESH_CHAR 0x2A31 /**< Scan Refresh characteristic UUID. */ #define BLE_UUID_SERIAL_NUMBER_STRING_CHAR 0x2A25 /**< Serial Number String characteristic UUID. */ #define BLE_UUID_SOFTWARE_REVISION_STRING_CHAR 0x2A28 /**< Software Revision String characteristic UUID. */ #define BLE_UUID_SUPPORTED_NEW_ALERT_CATEGORY_CHAR 0x2A47 /**< Supported New Alert Category characteristic UUID. */ #define BLE_UUID_SUPPORTED_UNREAD_ALERT_CATEGORY_CHAR 0x2A48 /**< Supported Unread Alert Category characteristic UUID. */ #define BLE_UUID_SYSTEM_ID_CHAR 0x2A23 /**< System Id characteristic UUID. */ #define BLE_UUID_TEMPERATURE_MEASUREMENT_CHAR 0x2A1C /**< Temperature Measurement characteristic UUID. */ #define BLE_UUID_TEMPERATURE_TYPE_CHAR 0x2A1D /**< Temperature Type characteristic UUID. */ #define BLE_UUID_TIME_ACCURACY_CHAR 0x2A12 /**< Time Accuracy characteristic UUID. */ #define BLE_UUID_TIME_SOURCE_CHAR 0x2A13 /**< Time Source characteristic UUID. */ #define BLE_UUID_TIME_UPDATE_CONTROL_POINT_CHAR 0x2A16 /**< Time Update Control Point characteristic UUID. */ #define BLE_UUID_TIME_UPDATE_STATE_CHAR 0x2A17 /**< Time Update State characteristic UUID. */ #define BLE_UUID_TIME_WITH_DST_CHAR 0x2A11 /**< Time With Dst characteristic UUID. */ #define BLE_UUID_TIME_ZONE_CHAR 0x2A0E /**< Time Zone characteristic UUID. */ #define BLE_UUID_TX_POWER_LEVEL_CHAR 0x2A07 /**< TX Power Level characteristic UUID. */ #define BLE_UUID_CSC_FEATURE_CHAR 0x2A5C /**< Cycling Speed and Cadence Feature characteristic UUID. */ #define BLE_UUID_CSC_MEASUREMENT_CHAR 0x2A5B /**< Cycling Speed and Cadence Measurement characteristic UUID. */ #define BLE_UUID_RSC_FEATURE_CHAR 0x2A54 /**< Running Speed and Cadence Feature characteristic UUID. */ #define BLE_UUID_SC_CTRLPT_CHAR 0x2A55 /**< Speed and Cadence Control Point UUID. */ #define BLE_UUID_RSC_MEASUREMENT_CHAR 0x2A53 /**< Running Speed and Cadence Measurement characteristic UUID. */ #define BLE_UUID_SENSOR_LOCATION_CHAR 0x2A5D /**< Sensor Location characteristic UUID. */ #define BLE_UUID_EXTERNAL_REPORT_REF_DESCR 0x2907 /**< External Report Reference descriptor UUID. */ #define BLE_UUID_REPORT_REF_DESCR 0x2908 /**< Report Reference descriptor UUID. */ #define BLE_UUID_LN_FEATURE_CHAR 0x2A6A /**< Location Navigation Service, Feature characteristic UUID. */ #define BLE_UUID_LN_POSITION_QUALITY_CHAR 0x2A69 /**< Location Navigation Service, Position quality UUID. */ #define BLE_UUID_LN_LOCATION_AND_SPEED_CHAR 0x2A67 /**< Location Navigation Service, Location and Speed characteristic UUID. */ #define BLE_UUID_LN_NAVIGATION_CHAR 0x2A68 /**< Location Navigation Service, Navigation characteristic UUID. */ #define BLE_UUID_LN_CONTROL_POINT_CHAR 0x2A6B /**< Location Navigation Service, Control point characteristic UUID. */ #define BLE_UUID_BMS_CTRLPT 0x2AA4 /**< BMS Control Point characteristic UUID. */ #define BLE_UUID_BMS_FEATURE 0x2AA5 /**< BMS Feature characteristic UUID. */ #define BLE_UUID_CGM_MEASUREMENT 0x2AA7 /**< CGM Service, Measurement characteristic UUID*/ #define BLE_UUID_CGM_FEATURE 0x2AA8 /**< CGM Service, Feature characteristic UUID*/ #define BLE_UUID_CGM_STATUS 0x2AA9 /**< CGM Service, Status characteristic UUID*/ #define BLE_UUID_CGM_SESSION_START_TIME 0x2AAA /**< CGM Service, session start time characteristic UUID*/ #define BLE_UUID_CGM_SESSION_RUN_TIME 0x2AAB /**< CGM Service, session run time characteristic UUID*/ #define BLE_UUID_CGM_SPECIFIC_OPS_CTRLPT 0x2AAC /**< CGM Service, specific ops ctrlpt characteristic UUID*/ #define BLE_UUID_PLX_SPOT_CHECK_MEAS 0x2A5E /**< PLX Service, spot check measurement characteristic UUID*/ #define BLE_UUID_PLX_CONTINUOUS_MEAS 0x2A5F /**< PLX Service, continuous measurement characteristic UUID*/ #define BLE_UUID_PLX_FEATURES 0x2A60 /**< PLX Service, feature characteristic UUID*/ /** @} */ /** @defgroup ALERT_LEVEL_VALUES Definitions for the Alert Level characteristic values * @{ */ #define BLE_CHAR_ALERT_LEVEL_NO_ALERT 0x00 /**< No Alert. */ #define BLE_CHAR_ALERT_LEVEL_MILD_ALERT 0x01 /**< Mild Alert. */ #define BLE_CHAR_ALERT_LEVEL_HIGH_ALERT 0x02 /**< High Alert. */ /** @} */ #define BLE_SRV_ENCODED_REPORT_REF_LEN 2 /**< The length of an encoded Report Reference Descriptor. */ #define BLE_CCCD_VALUE_LEN 2 /**< The length of a CCCD value. */ /**@brief Type definition for error handler function that will be called in case of an error in * a service or a service library module. */ typedef void (*ble_srv_error_handler_t) (uint32_t nrf_error); /**@brief Value of a Report Reference descriptor. * * @details This is mapping information that maps the parent characteristic to the Report ID(s) and * Report Type(s) defined within a Report Map characteristic. */ typedef struct { uint8_t report_id; /**< Non-zero value if there is more than one instance of the same Report Type */ uint8_t report_type; /**< Type of Report characteristic (see @ref BLE_HIDS_REPORT_TYPE) */ } ble_srv_report_ref_t; /**@brief UTF-8 string data type. * * @note The type can only hold a pointer to the string data (i.e. not the actual data). */ typedef struct { uint16_t length; /**< String length. */ uint8_t * p_str; /**< String data. */ } ble_srv_utf8_str_t; /**@brief Security settings structure. * @details This structure contains the security options needed during initialization of the * service. */ typedef struct { ble_gap_conn_sec_mode_t read_perm; /**< Read permissions. */ ble_gap_conn_sec_mode_t write_perm; /**< Write permissions. */ } ble_srv_security_mode_t; /**@brief Security settings structure. * @details This structure contains the security options needed during initialization of the * service. It can be used when the characteristics contains a CCCD. */ typedef struct { ble_gap_conn_sec_mode_t cccd_write_perm; /**< Write permissions for Client Characteristic Configuration Descriptor. */ ble_gap_conn_sec_mode_t read_perm; /**< Read permissions. */ ble_gap_conn_sec_mode_t write_perm; /**< Write permissions. */ } ble_srv_cccd_security_mode_t; /**@brief Function for decoding a CCCD value, and then testing if notification is * enabled. * * @param[in] p_encoded_data Buffer where the encoded CCCD is stored. * * @retval TRUE If notification is enabled. * @retval FALSE Otherwise. */ bool ble_srv_is_notification_enabled(uint8_t const * p_encoded_data); /**@brief Function for decoding a CCCD value, and then testing if indication is * enabled. * * @param[in] p_encoded_data Buffer where the encoded CCCD is stored. * * @retval TRUE If indication is enabled. * @retval FALSE Otherwise. */ bool ble_srv_is_indication_enabled(uint8_t const * p_encoded_data); /**@brief Function for encoding a Report Reference Descriptor. * * @param[in] p_encoded_buffer The buffer of the encoded data. * @param[in] p_report_ref Report Reference value to be encoded. * * @return Length of the encoded data. */ uint8_t ble_srv_report_ref_encode(uint8_t * p_encoded_buffer, const ble_srv_report_ref_t * p_report_ref); /**@brief Function for making a UTF-8 structure refer to an ASCII string. * * @param[out] p_utf8 UTF-8 structure to be set. * @param[in] p_ascii ASCII string to be referred to. */ void ble_srv_ascii_to_utf8(ble_srv_utf8_str_t * p_utf8, char * p_ascii); /**@brief Security Access enumeration. * @details This enumeration gives the possible requirements for accessing a characteristic value. */ typedef enum { SEC_NO_ACCESS = 0, /**< Not possible to access. */ SEC_OPEN = 1, /**< Access open. */ SEC_JUST_WORKS = 2, /**< Access possible with 'Just Works' security at least. */ SEC_MITM = 3, /**< Access possible with 'MITM' security at least. */ SEC_SIGNED = 4, /**< Access possible with 'signed' security at least. */ SEC_SIGNED_MITM = 5 /**< Access possible with 'signed and MITM' security at least. */ }security_req_t; /**@brief Characteristic User Descriptor parameters. * @details This structure contains the parameters for User Descriptor. */ typedef struct { uint16_t max_size; /**< Maximum size of the user descriptor*/ uint16_t size; /**< Size of the user descriptor*/ uint8_t *p_char_user_desc; /**< User descriptor content, pointer to a UTF-8 encoded string (non-NULL terminated)*/ bool is_var_len; /**< Indicates if the user descriptor has variable length.*/ ble_gatt_char_props_t char_props; /**< user descriptor properties.*/ bool is_defered_read; /**< Indicate if deferred read operations are supported.*/ bool is_defered_write; /**< Indicate if deferred write operations are supported.*/ security_req_t read_access; /**< Security requirement for reading the user descriptor.*/ security_req_t write_access; /**< Security requirement for writing the user descriptor.*/ bool is_value_user; /**< Indicate if the content of the characteristic is to be stored in the application (user) or in the stack.*/ }ble_add_char_user_desc_t; /**@brief Add characteristic parameters structure. * @details This structure contains the parameters needed to use the @ref characteristic_add function. */ typedef struct { uint16_t uuid; /**< Characteristic UUID (16 bits UUIDs).*/ uint8_t uuid_type; /**< Base UUID. If 0, the Bluetooth SIG UUID will be used. Otherwise, this should be a value returned by @ref sd_ble_uuid_vs_add when adding the base UUID.*/ uint16_t max_len; /**< Maximum length of the characteristic value.*/ uint16_t init_len; /**< Initial length of the characteristic value.*/ uint8_t * p_init_value; /**< Initial encoded value of the characteristic.*/ bool is_var_len; /**< Indicates if the characteristic value has variable length.*/ ble_gatt_char_props_t char_props; /**< Characteristic properties.*/ ble_gatt_char_ext_props_t char_ext_props; /**< Characteristic extended properties.*/ bool is_defered_read; /**< Indicate if deferred read operations are supported.*/ bool is_defered_write; /**< Indicate if deferred write operations are supported.*/ security_req_t read_access; /**< Security requirement for reading the characteristic value.*/ security_req_t write_access; /**< Security requirement for writing the characteristic value.*/ security_req_t cccd_write_access; /**< Security requirement for writing the characteristic's CCCD.*/ bool is_value_user; /**< Indicate if the content of the characteristic is to be stored in the application (user) or in the stack.*/ ble_add_char_user_desc_t *p_user_descr; /**< Pointer to user descriptor if needed*/ ble_gatts_char_pf_t *p_presentation_format; /**< Pointer to characteristic format if needed*/ } ble_add_char_params_t; /**@brief Add descriptor parameters structure. * @details This structure contains the parameters needed to use the @ref descriptor_add function. */ typedef struct { uint16_t uuid; /**< descriptor UUID (16 bits UUIDs).*/ uint8_t uuid_type; /**< Base UUID. If 0, the Bluetooth SIG UUID will be used. Otherwise, this should be a value returned by @ref sd_ble_uuid_vs_add when adding the base UUID.*/ bool is_defered_read; /**< Indicate if deferred read operations are supported.*/ bool is_defered_write; /**< Indicate if deferred write operations are supported.*/ bool is_var_len; /**< Indicates if the descriptor value has variable length.*/ security_req_t read_access; /**< Security requirement for reading the descriptor value.*/ security_req_t write_access; /**< Security requirement for writing the descriptor value.*/ bool is_value_user; /**< Indicate if the content of the characteristic is to be stored in the application (user) or in the stack.*/ uint16_t init_len; /**< Initial descriptor value length in bytes. */ uint16_t init_offs; /**< Initial descriptor value offset in bytes. If different from zero, the first init_offs bytes of the attribute value will be left uninitialized. */ uint16_t max_len; /**< Maximum descriptor value length in bytes, see @ref BLE_GATTS_ATTR_LENS_MAX for maximum values. */ uint8_t* p_value; /**< Pointer to the value of the descriptor*/ } ble_add_descr_params_t; /**@brief Function for adding a characteristic to a given service. * * If no pointer is given for the initial value, * the initial length parameter will be ignored and the initial length will be 0. * * @param[in] service_handle Handle of the service to which the characteristic is to be added. * @param[in] p_char_props Information needed to add the characteristic. * @param[out] p_char_handle Handle of the added characteristic. * * @retval NRF_SUCCESS If the characteristic was added successfully. Otherwise, an error code is returned. */ uint32_t characteristic_add(uint16_t service_handle, ble_add_char_params_t * p_char_props, ble_gatts_char_handles_t * p_char_handle); /**@brief Function for adding a characteristic's descriptor to a given characteristic. * * @param[in] char_handle Handle of the characteristic to which the descriptor is to be added, if @ref BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially. * @param[in] p_descr_props Information needed to add the descriptor. * @param[out] p_descr_handle Handle of the added descriptor. * * @retval NRF_SUCCESS If the characteristic was added successfully. Otherwise, an error code is returned. */ uint32_t descriptor_add(uint16_t char_handle, ble_add_descr_params_t * p_descr_props, uint16_t * p_descr_handle); #ifdef __cplusplus } #endif #endif // BLE_SRV_COMMON_H__ /** @} */