// // WARNING: This file is automatically generated! Please edit onnx.in.proto. // // SPDX-License-Identifier: Apache-2.0 syntax = "proto3"; package onnx; // Overview // // ONNX is an open specification that is comprised of the following components: // // 1) A definition of an extensible computation graph model. // 2) Definitions of standard data types. // 3) Definitions of built-in operators. // // This document describes the syntax of models and their computation graphs, // as well as the standard data types. Together, they are referred to as the ONNX // Intermediate Representation, or 'IR' for short. // // The normative semantic specification of the ONNX IR is found in docs/IR.md. // Definitions of the built-in neural network operators may be found in docs/Operators.md. // Notes // // Protobuf compatibility // // To simplify framework compatibility, ONNX is defined using the subset of protobuf // that is compatible with both protobuf v2 and v3. This means that we do not use any // protobuf features that are only available in one of the two versions. // // Here are the most notable contortions we have to carry out to work around // these limitations: // // - No 'map' (added protobuf 3.0). We instead represent mappings as lists // of key-value pairs, where order does not matter and duplicates // are not allowed. // Versioning // // ONNX versioning is specified in docs/IR.md and elaborated on in docs/Versioning.md // // To be compatible with both proto2 and proto3, we will use a version number // that is not defined by the default value but an explicit enum number. enum Version { // proto3 requires the first enum value to be zero. // We add this just to appease the compiler. _START_VERSION = 0; // The version field is always serialized and we will use it to store the // version that the graph is generated from. This helps us set up version // control. // For the IR, we are using simple numbers starting with 0x00000001, // which was the version we published on Oct 10, 2017. IR_VERSION_2017_10_10 = 0x0000000000000001; // IR_VERSION 2 published on Oct 30, 2017 // - Added type discriminator to AttributeProto to support proto3 users IR_VERSION_2017_10_30 = 0x0000000000000002; // IR VERSION 3 published on Nov 3, 2017 // - For operator versioning: // - Added new message OperatorSetIdProto // - Added opset_import in ModelProto // - For vendor extensions, added domain in NodeProto IR_VERSION_2017_11_3 = 0x0000000000000003; // IR VERSION 4 published on Jan 22, 2019 // - Relax constraint that initializers should be a subset of graph inputs // - Add type BFLOAT16 IR_VERSION_2019_1_22 = 0x0000000000000004; // IR VERSION 5 published on March 18, 2019 // - Add message TensorAnnotation. // - Add quantization annotation in GraphProto to map tensor with its scale and zero point quantization parameters. IR_VERSION_2019_3_18 = 0x0000000000000005; // IR VERSION 6 published on Sep 19, 2019 // - Add support for sparse tensor constants stored in model. // - Add message SparseTensorProto // - Add sparse initializers IR_VERSION_2019_9_19 = 0x0000000000000006; // IR VERSION 7 published on May 8, 2020 // - Add support to allow function body graph to rely on multiple external opreator sets. // - Add a list to promote inference graph's initializers to global and // mutable variables. Global variables are visible in all graphs of the // stored models. // - Add message TrainingInfoProto to store initialization // method and training algorithm. The execution of TrainingInfoProto // can modify the values of mutable variables. // - Implicitly add inference graph into each TrainingInfoProto's algorithm. IR_VERSION_2020_5_8 = 0x0000000000000007; // IR VERSION 8 published on July 30, 2021 // Introduce TypeProto.SparseTensor // Introduce TypeProto.Optional // Added a list of FunctionProtos local to the model // Deprecated since_version and operator status from FunctionProto IR_VERSION_2021_7_30 = 0x0000000000000008; // IR VERSION 9 published on May 5, 2023 // Added AttributeProto to FunctionProto so that default attribute values can be set. // Added FLOAT8E4M3FN, FLOAT8E4M3FNUZ, FLOAT8E5M2, FLOAT8E5M2FNUZ. IR_VERSION_2023_5_5 = 0x0000000000000009; // IR VERSION 10 published on TBD // Added UINT4, INT4. IR_VERSION = 0x000000000000000A; } // Attributes // // A named attribute containing either singular float, integer, string, graph, // and tensor values, or repeated float, integer, string, graph, and tensor values. // An AttributeProto MUST contain the name field, and *only one* of the // following content fields, effectively enforcing a C/C++ union equivalent. message AttributeProto { reserved 12, 16 to 19; reserved "v"; // Note: this enum is structurally identical to the OpSchema::AttrType // enum defined in schema.h. If you rev one, you likely need to rev the other. enum AttributeType { UNDEFINED = 0; FLOAT = 1; INT = 2; STRING = 3; TENSOR = 4; GRAPH = 5; SPARSE_TENSOR = 11; TYPE_PROTO = 13; FLOATS = 6; INTS = 7; STRINGS = 8; TENSORS = 9; GRAPHS = 10; SPARSE_TENSORS = 12; TYPE_PROTOS = 14; } // The name field MUST be present for this version of the IR. string name = 1; // namespace Attribute // if ref_attr_name is not empty, ref_attr_name is the attribute name in parent function. // In this case, this AttributeProto does not contain data, and it's a reference of attribute // in parent scope. // NOTE: This should ONLY be used in function (sub-graph). It's invalid to be used in main graph. string ref_attr_name = 21; // A human-readable documentation for this attribute. Markdown is allowed. string doc_string = 13; // The type field MUST be present for this version of the IR. // For 0.0.1 versions of the IR, this field was not defined, and // implementations needed to use has_field heuristics to determine // which value field was in use. For IR_VERSION 0.0.2 or later, this // field MUST be set and match the f|i|s|t|... field in use. This // change was made to accommodate proto3 implementations. AttributeType type = 20; // discriminator that indicates which field below is in use // Exactly ONE of the following fields must be present for this version of the IR float f = 2; // float int64 i = 3; // int bytes s = 4; // UTF-8 string TensorProto t = 5; // tensor value GraphProto g = 6; // graph SparseTensorProto sparse_tensor = 22; // sparse tensor value // Do not use field below, it's deprecated. // optional ValueProto v = 12; // value - subsumes everything but graph TypeProto tp = 14; // type proto repeated float floats = 7; // list of floats repeated int64 ints = 8; // list of ints repeated bytes strings = 9; // list of UTF-8 strings repeated TensorProto tensors = 10; // list of tensors repeated GraphProto graphs = 11; // list of graph repeated SparseTensorProto sparse_tensors = 23; // list of sparse tensors repeated TypeProto type_protos = 15;// list of type protos } // Defines information on value, including the name, the type, and // the shape of the value. message ValueInfoProto { // This field MUST be present in this version of the IR. string name = 1; // namespace Value // This field MUST be present in this version of the IR for // inputs and outputs of the top-level graph. TypeProto type = 2; // A human-readable documentation for this value. Markdown is allowed. string doc_string = 3; // Named metadata values; keys should be distinct. repeated StringStringEntryProto metadata_props = 4; } // Nodes // // Computation graphs are made up of a DAG of nodes, which represent what is // commonly called a "layer" or "pipeline stage" in machine learning frameworks. // // For example, it can be a node of type "Conv" that takes in an image, a filter // tensor and a bias tensor, and produces the convolved output. message NodeProto { repeated string input = 1; // namespace Value repeated string output = 2; // namespace Value // An optional identifier for this node in a graph. // This field MAY be absent in this version of the IR. string name = 3; // namespace Node // The symbolic identifier of the Operator to execute. string op_type = 4; // namespace Operator // The domain of the OperatorSet that specifies the operator named by op_type. string domain = 7; // namespace Domain // Overload identifier, used only to map this to a model-local function. string overload = 8; // Additional named attributes. repeated AttributeProto attribute = 5; // A human-readable documentation for this node. Markdown is allowed. string doc_string = 6; // Named metadata values; keys should be distinct. repeated StringStringEntryProto metadata_props = 9; } // Training information // TrainingInfoProto stores information for training a model. // In particular, this defines two functionalities: an initialization-step // and a training-algorithm-step. Initialization resets the model // back to its original state as if no training has been performed. // Training algorithm improves the model based on input data. // // The semantics of the initialization-step is that the initializers // in ModelProto.graph and in TrainingInfoProto.algorithm are first // initialized as specified by the initializers in the graph, and then // updated by the "initialization_binding" in every instance in // ModelProto.training_info. // // The field "algorithm" defines a computation graph which represents a // training algorithm's step. After the execution of a // TrainingInfoProto.algorithm, the initializers specified by "update_binding" // may be immediately updated. If the targeted training algorithm contains // consecutive update steps (such as block coordinate descent methods), // the user needs to create a TrainingInfoProto for each step. message TrainingInfoProto { // This field describes a graph to compute the initial tensors // upon starting the training process. Initialization graph has no input // and can have multiple outputs. Usually, trainable tensors in neural // networks are randomly initialized. To achieve that, for each tensor, // the user can put a random number operator such as RandomNormal or // RandomUniform in TrainingInfoProto.initialization.node and assign its // random output to the specific tensor using "initialization_binding". // This graph can also set the initializers in "algorithm" in the same // TrainingInfoProto; a use case is resetting the number of training // iteration to zero. // // By default, this field is an empty graph and its evaluation does not // produce any output. Thus, no initializer would be changed by default. GraphProto initialization = 1; // This field represents a training algorithm step. Given required inputs, // it computes outputs to update initializers in its own or inference graph's // initializer lists. In general, this field contains loss node, gradient node, // optimizer node, increment of iteration count. // // An execution of the training algorithm step is performed by executing the // graph obtained by combining the inference graph (namely "ModelProto.graph") // and the "algorithm" graph. That is, the actual // input/initializer/output/node/value_info/sparse_initializer list of // the training graph is the concatenation of // "ModelProto.graph.input/initializer/output/node/value_info/sparse_initializer" // and "algorithm.input/initializer/output/node/value_info/sparse_initializer" // in that order. This combined graph must satisfy the normal ONNX conditions. // Now, let's provide a visualization of graph combination for clarity. // Let the inference graph (i.e., "ModelProto.graph") be // tensor_a, tensor_b -> MatMul -> tensor_c -> Sigmoid -> tensor_d // and the "algorithm" graph be // tensor_d -> Add -> tensor_e // The combination process results // tensor_a, tensor_b -> MatMul -> tensor_c -> Sigmoid -> tensor_d -> Add -> tensor_e // // Notice that an input of a node in the "algorithm" graph may reference the // output of a node in the inference graph (but not the other way round). Also, inference // node cannot reference inputs of "algorithm". With these restrictions, inference graph // can always be run independently without training information. // // By default, this field is an empty graph and its evaluation does not // produce any output. Evaluating the default training step never // update any initializers. GraphProto algorithm = 2; // This field specifies the bindings from the outputs of "initialization" to // some initializers in "ModelProto.graph.initializer" and // the "algorithm.initializer" in the same TrainingInfoProto. // See "update_binding" below for details. // // By default, this field is empty and no initializer would be changed // by the execution of "initialization". repeated StringStringEntryProto initialization_binding = 3; // Gradient-based training is usually an iterative procedure. In one gradient // descent iteration, we apply // // x = x - r * g // // where "x" is the optimized tensor, "r" stands for learning rate, and "g" is // gradient of "x" with respect to a chosen loss. To avoid adding assignments // into the training graph, we split the update equation into // // y = x - r * g // x = y // // The user needs to save "y = x - r * g" into TrainingInfoProto.algorithm. To // tell that "y" should be assigned to "x", the field "update_binding" may // contain a key-value pair of strings, "x" (key of StringStringEntryProto) // and "y" (value of StringStringEntryProto). // For a neural network with multiple trainable (mutable) tensors, there can // be multiple key-value pairs in "update_binding". // // The initializers appears as keys in "update_binding" are considered // mutable variables. This implies some behaviors // as described below. // // 1. We have only unique keys in all "update_binding"s so that two // variables may not have the same name. This ensures that one // variable is assigned up to once. // 2. The keys must appear in names of "ModelProto.graph.initializer" or // "TrainingInfoProto.algorithm.initializer". // 3. The values must be output names of "algorithm" or "ModelProto.graph.output". // 4. Mutable variables are initialized to the value specified by the // corresponding initializer, and then potentially updated by // "initializer_binding"s and "update_binding"s in "TrainingInfoProto"s. // // This field usually contains names of trainable tensors // (in ModelProto.graph), optimizer states such as momentums in advanced // stochastic gradient methods (in TrainingInfoProto.graph), // and number of training iterations (in TrainingInfoProto.graph). // // By default, this field is empty and no initializer would be changed // by the execution of "algorithm". repeated StringStringEntryProto update_binding = 4; } // Models // // ModelProto is a top-level file/container format for bundling a ML model and // associating its computation graph with metadata. // // The semantics of the model are described by the associated GraphProto's. message ModelProto { // The version of the IR this model targets. See Version enum above. // This field MUST be present. int64 ir_version = 1; // The OperatorSets this model relies on. // All ModelProtos MUST have at least one entry that // specifies which version of the ONNX OperatorSet is // being imported. // // All nodes in the ModelProto's graph will bind against the operator // with the same-domain/same-op_type operator with the HIGHEST version // in the referenced operator sets. repeated OperatorSetIdProto opset_import = 8; // The name of the framework or tool used to generate this model. // This field SHOULD be present to indicate which implementation/tool/framework // emitted the model. string producer_name = 2; // The version of the framework or tool used to generate this model. // This field SHOULD be present to indicate which implementation/tool/framework // emitted the model. string producer_version = 3; // Domain name of the model. // We use reverse domain names as name space indicators. For example: // `com.facebook.fair` or `com.microsoft.cognitiveservices` // // Together with `model_version` and GraphProto.name, this forms the unique identity of // the graph. string domain = 4; // The version of the graph encoded. See Version enum below. int64 model_version = 5; // A human-readable documentation for this model. Markdown is allowed. string doc_string = 6; // The parameterized graph that is evaluated to execute the model. GraphProto graph = 7; // Named metadata values; keys should be distinct. repeated StringStringEntryProto metadata_props = 14; // Training-specific information. Sequentially executing all stored // `TrainingInfoProto.algorithm`s and assigning their outputs following // the corresponding `TrainingInfoProto.update_binding`s is one training // iteration. Similarly, to initialize the model // (as if training hasn't happened), the user should sequentially execute // all stored `TrainingInfoProto.initialization`s and assigns their outputs // using `TrainingInfoProto.initialization_binding`s. // // If this field is empty, the training behavior of the model is undefined. repeated TrainingInfoProto training_info = 20; // A list of function protos local to the model. // // The (domain, name, overload) tuple must be unique across the function protos in this list. // In case of any conflicts the behavior (whether the model local functions are given higher priority, // or standard operator sets are given higher priotity or this is treated as error) is defined by // the runtimes. // // The operator sets imported by FunctionProto should be compatible with the ones // imported by ModelProto and other model local FunctionProtos. // Example, if same operator set say 'A' is imported by a FunctionProto and ModelProto // or by 2 FunctionProtos then versions for the operator set may be different but, // the operator schema returned for op_type, domain, version combination // for both the versions should be same for every node in the function body. // // One FunctionProto can reference other FunctionProto in the model, however, recursive reference // is not allowed. repeated FunctionProto functions = 25; }; // StringStringEntryProto follows the pattern for cross-proto-version maps. // See https://developers.google.com/protocol-buffers/docs/proto3#maps message StringStringEntryProto { string key = 1; string value = 2; }; message TensorAnnotation { string tensor_name = 1; // pairs to annotate tensor specified by above. // The keys used in the mapping below must be pre-defined in ONNX spec. // For example, for 8-bit linear quantization case, 'SCALE_TENSOR', 'ZERO_POINT_TENSOR' will be pre-defined as // quantization parameter keys. repeated StringStringEntryProto quant_parameter_tensor_names = 2; } // Graphs // // A graph defines the computational logic of a model and is comprised of a parameterized // list of nodes that form a directed acyclic graph based on their inputs and outputs. // This is the equivalent of the "network" or "graph" in many deep learning // frameworks. message GraphProto { // The nodes in the graph, sorted topologically. repeated NodeProto node = 1; // The name of the graph. string name = 2; // namespace Graph // A list of named tensor values, used to specify constant inputs of the graph. // Each initializer (both TensorProto as well SparseTensorProto) MUST have a name. // The name MUST be unique across both initializer and sparse_initializer, // but the name MAY also appear in the input list. repeated TensorProto initializer = 5; // Initializers (see above) stored in sparse format. repeated SparseTensorProto sparse_initializer = 15; // A human-readable documentation for this graph. Markdown is allowed. string doc_string = 10; // The inputs and outputs of the graph. repeated ValueInfoProto input = 11; repeated ValueInfoProto output = 12; // Information for the values in the graph. The ValueInfoProto.name's // must be distinct. It is optional for a value to appear in value_info list. repeated ValueInfoProto value_info = 13; // This field carries information to indicate the mapping among a tensor and its // quantization parameter tensors. For example: // For tensor 'a', it may have {'SCALE_TENSOR', 'a_scale'} and {'ZERO_POINT_TENSOR', 'a_zero_point'} annotated, // which means, tensor 'a_scale' and tensor 'a_zero_point' are scale and zero point of tensor 'a' in the model. repeated TensorAnnotation quantization_annotation = 14; // Named metadata values; keys should be distinct. repeated StringStringEntryProto metadata_props = 16; reserved 3, 4, 6 to 9; reserved "ir_version", "producer_version", "producer_tag", "domain"; } // Tensors // // A serialized tensor value. message TensorProto { enum DataType { UNDEFINED = 0; // Basic types. FLOAT = 1; // float UINT8 = 2; // uint8_t INT8 = 3; // int8_t UINT16 = 4; // uint16_t INT16 = 5; // int16_t INT32 = 6; // int32_t INT64 = 7; // int64_t STRING = 8; // string BOOL = 9; // bool // IEEE754 half-precision floating-point format (16 bits wide). // This format has 1 sign bit, 5 exponent bits, and 10 mantissa bits. FLOAT16 = 10; DOUBLE = 11; UINT32 = 12; UINT64 = 13; COMPLEX64 = 14; // complex with float32 real and imaginary components COMPLEX128 = 15; // complex with float64 real and imaginary components // Non-IEEE floating-point format based on IEEE754 single-precision // floating-point number truncated to 16 bits. // This format has 1 sign bit, 8 exponent bits, and 7 mantissa bits. BFLOAT16 = 16; // Non-IEEE floating-point format based on papers // FP8 Formats for Deep Learning, https://arxiv.org/abs/2209.05433, // 8-bit Numerical Formats For Deep Neural Networks, https://arxiv.org/pdf/2206.02915.pdf. // Operators supported FP8 are Cast, CastLike, QuantizeLinear, DequantizeLinear. // The computation usually happens inside a block quantize / dequantize // fused by the runtime. FLOAT8E4M3FN = 17; // float 8, mostly used for coefficients, supports nan, not inf FLOAT8E4M3FNUZ = 18; // float 8, mostly used for coefficients, supports nan, not inf, no negative zero FLOAT8E5M2 = 19; // follows IEEE 754, supports nan, inf, mostly used for gradients FLOAT8E5M2FNUZ = 20; // follows IEEE 754, supports nan, not inf, mostly used for gradients, no negative zero // 4-bit data-types UINT4 = 21; // Unsigned integer in range [0, 15] INT4 = 22; // Signed integer in range [-8, 7], using two's-complement representation // Future extensions go here. } // The shape of the tensor. repeated int64 dims = 1; // The data type of the tensor. // This field MUST have a valid TensorProto.DataType value int32 data_type = 2; // For very large tensors, we may want to store them in chunks, in which // case the following fields will specify the segment that is stored in // the current TensorProto. message Segment { int64 begin = 1; int64 end = 2; } Segment segment = 3; // Tensor content must be organized in row-major order. // // Depending on the data_type field, exactly one of the fields below with // name ending in _data is used to store the elements of the tensor. // For float and complex64 values // Complex64 tensors are encoded as a single array of floats, // with the real components appearing in odd numbered positions, // and the corresponding imaginary component appearing in the // subsequent even numbered position. (e.g., [1.0 + 2.0i, 3.0 + 4.0i] // is encoded as [1.0, 2.0 ,3.0 ,4.0] // When this field is present, the data_type field MUST be FLOAT or COMPLEX64. repeated float float_data = 4 [packed = true]; // For int32, uint8, int8, uint16, int16, uint4, int4, bool, float8 and float16 values // float16 and float8 values must be bit-wise converted to an uint16_t prior // to writing to the buffer. // uint4 and int4 values must be packed to 4bitx2 prior to writing to the buffer, the first element is stored in // the 4 LSB and the second element is stored in the 4 MSB. // When this field is present, the data_type field MUST be // INT32, INT16, INT8, INT4, UINT16, UINT8, UINT4, BOOL, FLOAT16, BFLOAT16, FLOAT8E4M3FN, FLOAT8E4M3FNUZ, FLOAT8E5M2, FLOAT8E5M2FNUZ repeated int32 int32_data = 5 [packed = true]; // For strings. // Each element of string_data is a UTF-8 encoded Unicode // string. No trailing null, no leading BOM. The protobuf "string" // scalar type is not used to match ML community conventions. // When this field is present, the data_type field MUST be STRING repeated bytes string_data = 6; // For int64. // When this field is present, the data_type field MUST be INT64 repeated int64 int64_data = 7 [packed = true]; // Optionally, a name for the tensor. string name = 8; // namespace Value // A human-readable documentation for this tensor. Markdown is allowed. string doc_string = 12; // Serializations can either use one of the fields above, or use this // raw bytes field. The only exception is the string case, where one is // required to store the content in the repeated bytes string_data field. // // When this raw_data field is used to store tensor value, elements MUST // be stored in as fixed-width, little-endian order. // Floating-point data types MUST be stored in IEEE 754 format. // Complex64 elements must be written as two consecutive FLOAT values, real component first. // Complex128 elements must be written as two consecutive DOUBLE values, real component first. // Boolean type MUST be written one byte per tensor element (00000001 for true, 00000000 for false). // uint4 and int4 values must be packed to 4bitx2, the first element is stored in the 4 LSB and the second element is stored in the 4 MSB. // // Note: the advantage of specific field rather than the raw_data field is // that in some cases (e.g. int data), protobuf does a better packing via // variable length storage, and may lead to smaller binary footprint. // When this field is present, the data_type field MUST NOT be STRING or UNDEFINED bytes raw_data = 9; // Data can be stored inside the protobuf file using type-specific fields or raw_data. // Alternatively, raw bytes data can be stored in an external file, using the external_data field. // external_data stores key-value pairs describing data location. Recognized keys are: // - "location" (required) - POSIX filesystem path relative to the directory where the ONNX // protobuf model was stored // - "offset" (optional) - position of byte at which stored data begins. Integer stored as string. // Offset values SHOULD be multiples 4096 (page size) to enable mmap support. // - "length" (optional) - number of bytes containing data. Integer stored as string. // - "checksum" (optional) - SHA1 digest of file specified in under 'location' key. repeated StringStringEntryProto external_data = 13; // Location of the data for this tensor. MUST be one of: // - DEFAULT - data stored inside the protobuf message. Data is stored in raw_data (if set) otherwise in type-specified field. // - EXTERNAL - data stored in an external location as described by external_data field. enum DataLocation { DEFAULT = 0; EXTERNAL = 1; } // If value not set, data is stored in raw_data (if set) otherwise in type-specified field. DataLocation data_location = 14; // For double // Complex128 tensors are encoded as a single array of doubles, // with the real components appearing in odd numbered positions, // and the corresponding imaginary component appearing in the // subsequent even numbered position. (e.g., [1.0 + 2.0i, 3.0 + 4.0i] // is encoded as [1.0, 2.0 ,3.0 ,4.0] // When this field is present, the data_type field MUST be DOUBLE or COMPLEX128 repeated double double_data = 10 [packed = true]; // For uint64 and uint32 values // When this field is present, the data_type field MUST be // UINT32 or UINT64 repeated uint64 uint64_data = 11 [packed = true]; // Named metadata values; keys should be distinct. repeated StringStringEntryProto metadata_props = 16; } // A serialized sparse-tensor value message SparseTensorProto { // The sequence of non-default values are encoded as a tensor of shape [NNZ]. // The default-value is zero for numeric tensors, and empty-string for string tensors. // values must have a non-empty name present which serves as a name for SparseTensorProto // when used in sparse_initializer list. TensorProto values = 1; // The indices of the non-default values, which may be stored in one of two formats. // (a) Indices can be a tensor of shape [NNZ, rank] with the [i,j]-th value // corresponding to the j-th index of the i-th value (in the values tensor). // (b) Indices can be a tensor of shape [NNZ], in which case the i-th value // must be the linearized-index of the i-th value (in the values tensor). // The linearized-index can be converted into an index tuple (k_1,...,k_rank) // using the shape provided below. // The indices must appear in ascending order without duplication. // In the first format, the ordering is lexicographic-ordering: // e.g., index-value [1,4] must appear before [2,1] TensorProto indices = 2; // The shape of the underlying dense-tensor: [dim_1, dim_2, ... dim_rank] repeated int64 dims = 3; } // Defines a tensor shape. A dimension can be either an integer value // or a symbolic variable. A symbolic variable represents an unknown // dimension. message TensorShapeProto { message Dimension { oneof value { int64 dim_value = 1; string dim_param = 2; // namespace Shape }; // Standard denotation can optionally be used to denote tensor // dimensions with standard semantic descriptions to ensure // that operations are applied to the correct axis of a tensor. // Refer to https://github.com/onnx/onnx/blob/main/docs/DimensionDenotation.md#denotation-definition // for pre-defined dimension denotations. string denotation = 3; }; repeated Dimension dim = 1; } // Types // // The standard ONNX data types. message TypeProto { message Tensor { // This field MUST NOT have the value of UNDEFINED // This field MUST have a valid TensorProto.DataType value // This field MUST be present for this version of the IR. int32 elem_type = 1; TensorShapeProto shape = 2; } // repeated T message Sequence { // The type and optional shape of each element of the sequence. // This field MUST be present for this version of the IR. TypeProto elem_type = 1; }; // map message Map { // This field MUST have a valid TensorProto.DataType value // This field MUST be present for this version of the IR. // This field MUST refer to an integral type ([U]INT{8|16|32|64}) or STRING int32 key_type = 1; // This field MUST be present for this version of the IR. TypeProto value_type = 2; }; // wrapper for Tensor, Sequence, or Map message Optional { // The type and optional shape of the element wrapped. // This field MUST be present for this version of the IR. // Possible values correspond to OptionalProto.DataType enum TypeProto elem_type = 1; }; message SparseTensor { // This field MUST NOT have the value of UNDEFINED // This field MUST have a valid TensorProto.DataType value // This field MUST be present for this version of the IR. int32 elem_type = 1; TensorShapeProto shape = 2; } oneof value { // The type of a tensor. Tensor tensor_type = 1; // NOTE: DNN-only implementations of ONNX MAY elect to not support non-tensor values // as input and output to graphs and nodes. These types are needed to naturally // support classical ML operators. DNN operators SHOULD restrict their input // and output types to tensors. // The type of a sequence. Sequence sequence_type = 4; // The type of a map. Map map_type = 5; // The type of an optional. Optional optional_type = 9; // Type of the sparse tensor SparseTensor sparse_tensor_type = 8; } // An optional denotation can be used to denote the whole // type with a standard semantic description as to what is // stored inside. Refer to https://github.com/onnx/onnx/blob/main/docs/TypeDenotation.md#type-denotation-definition // for pre-defined type denotations. string denotation = 6; } // Operator Sets // // OperatorSets are uniquely identified by a (domain, opset_version) pair. message OperatorSetIdProto { // The domain of the operator set being identified. // The empty string ("") or absence of this field implies the operator // set that is defined as part of the ONNX specification. // This field MUST be present in this version of the IR when referring to any other operator set. string domain = 1; // The version of the operator set being identified. // This field MUST be present in this version of the IR. int64 version = 2; } // Operator/function status. enum OperatorStatus { EXPERIMENTAL = 0; STABLE = 1; } message FunctionProto { // The name of the function, similar to op_type in NodeProto. // This is part of the unique-id (domain, name, overload) of FunctionProtos in a model. string name = 1; // Deprecated since IR Version 8 // optional int64 since_version = 2; reserved 2; reserved "since_version"; // Deprecated since IR Version 8 // optional OperatorStatus status = 3; reserved 3; reserved "status"; // The inputs and outputs of the function. repeated string input = 4; repeated string output = 5; // The attribute parameters of the function. // It is for function parameters without default values. repeated string attribute = 6; // The attribute protos of the function. // It is for function attributes with default values. // A function attribute shall be represented either as // a string attribute or an AttributeProto, not both. repeated AttributeProto attribute_proto = 11; // The nodes in the function. repeated NodeProto node = 7; // A human-readable documentation for this function. Markdown is allowed. string doc_string = 8; // The OperatorSets this function body (graph) relies on. // // All nodes in the function body (graph) will bind against the operator // with the same-domain/same-op_type operator with the HIGHEST version // in the referenced operator sets. This means at most one version can be relied // for one domain. // // The operator sets imported by FunctionProto should be compatible with the ones // imported by ModelProto. Example, if same operator set say 'A' is imported by FunctionProto // and ModelProto then versions for the operator set may be different but, // the operator schema returned for op_type, domain, version combination // for both the versions should be same. repeated OperatorSetIdProto opset_import = 9; // The domain which this function belongs to. // This is part of the unique-id (domain, name, overload) of FunctionProtos in a model. string domain = 10; // The overload identifier of the function. // This is part of the unique-id (domain, name, overload) of FunctionProtos in a model. string overload = 13; // Information for the values in the function. The ValueInfoProto.name's // must be distinct and refer to names in the function (including inputs, // outputs, and intermediate values). It is optional for a value to appear // in value_info list. repeated ValueInfoProto value_info = 12; // Named metadata values; keys should be distinct. repeated StringStringEntryProto metadata_props = 14; } // For using protobuf-lite option optimize_for = LITE_RUNTIME;