Set all configuration values to default values (factory settings). The way how the button reacts when press/released The way the Built-in Dimmer reacts when light is turned on/off with button This parameter is used to enable the dimming option of the product. When disabled the dimming and fading routine are disabled. The maximum powerload in watts when light is turned on, when measured higher then this value the Inline Dimmer is automatically turned off. The speed of dimming when activated (manual and RF). Dim speed is 1% per value (* 10 ms) The speed of fading up when activated (manual and RF). Fade speed is 1% per value (* 10 ms) The time window to repress button to start dimming. Toggle time is value (* 10ms) A percentage that an energy value must be different compared to a previous sent value before an unsolicited meter report is sent. Minimum value = 10% Maximum value = 100% A watt value that an energy value must be different compared to a previous sent value before an unsolicited meter report is sent. Minimum value = 5 watt Maximum value = 255 watt A time value that has to be passed compared to a previous sent value before a unsolicited meter report is sent. Minimum value = 10 seconds Maximum value = 255 seconds What to do with lamp status when power applied. If 0x00: Always switch light off when power applied. If > 0x00: Switch lamp on/off depending on last known lampstatus before power was disconnected. The speed of fading up when activated (manual and RF). Fade speed is 1% per value (* 10 ms)