Set the repetitions for playing doorbell ringtone. Value=1 to 255, the range of repetition is 1 to 100. Note: If the time of playing doorbell ringtone is more than 20s, the volume of ringtone will reduce to silence no matter how many repetitions of doorbell ringtone are set. Set the default doorbell ringtone. Value=1-100, Specify the ringtone as default. Select a ringtone to play. Value=0, stop playing. Value=1-100, play the specified ringtone. Value=255, play the default ringtone. Value=other, ignore. Playback Control Set the volume of ringtone. Define functions of "Button -" and "Button+". Button - is previous, Button+ is next. Define functions of "Button -" and "Button+" when short pressing and long pressing it. Get Wireless Button Battery Status Defines the automated status notification of an associated device when status changes Defines the automated status notification of an associated device when the wireless button battery level changes Pair the Wireless Button with Doorbell. Value=0x55555555, Start the Wireless Button pairing mode and the blue Led will blink slowly, short press the Wireless Button once, if the blue Led change to be solid, which means the pairing is successful. Otherwise, repeat the steps. It will automatically exit the pairing mode after 8s if there is no pressing action of the Wireless Button. Note: You can send this configuration Get CC to ask the pairing result: If configuration report value=0x00000000, which means the pairing is failed. If configuration report value =0xFFFFFFFF, which means the pairing is successful. Enable/disable Configuration Locked Reset to the default configuration.