Which value of the Sensor Binary Report will be sent when the Sensor is triggered On. Enable/disable wake up 10 minutes when re-power on the Sensor. Which value of the Basic Report will be sent when the Sensor is triggered On. Set the low battery value. Set the interval time of battery report. Value=0, disable the battery report for a interval time. Value=1 to 0x7FFFFFFF, the interval time of battery report is set. Note: 1, if the value is less than 10, the time unit is second. If the value is more than 10, the time unit is 4 minutes, which means if the value is more than 10 and less than 240, the interval time is 4 minutes. If the value is more than 240 and less than 480, the interval is 8 minutes. 2, if the current battery report falls below the low battery value (configurable parameter 39), it will send battery report=0xFF. Defines the type of report sent. Value 1 (msb) Reserved Value 2 Reserved Value 3 bits 7-1 reserved bits 0 - Basic Report Value 4 (lsb) bits 7-4 reserved bit 3 Sensor Binary bit 2-0 reserved Reset to the default configuration.